Installation Problem on a Windows 7 x64 machine

After downloading the two files from otn for 12c successfully, I started the install.   It got to 59% complete and then just hung.  Prior to that I got a few error messages about files missing.  It appeared that it was trying to update a key when it hung.  No error message was produced, but I cancelled it after a few hours.  I had previously installed 11i on this laptop, but thought I erased everything about that install.  Any ideas?  Thanks in advanced.   Bob

Pl identify the version on Win 7 - you will need Professional or higher - Oracle Database Preinstallation Tasks
Pl confirm that you unzipped both zip files into one single folder. Pl also confirm that you executed setup.exe by right-clicking and selecting "Run As Administrator".
If you chose to install the software AND create a database, some folks have reported issues with this. Try installing the software only first, then using DBCA to create a database - Installing Oracle Database and Creating a Database
Pl check the install log file for errors and post them here - Troubleshooting the Oracle Database Installation

Similar Messages

  • We have a 10 person office - all either use Acrobat XI or Reader XI.  One person is on Windows 7.  The rest are on Windows 8 (not 8.1).  I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are a

    We have a 10 person office - all either use Acrobat XI or Reader XI.  One person is on Windows 7.  The rest are on Windows 8 (not 8.1).  I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are all having problems opening pdf's sent to us from other firms. This has increased in frequency over the past two months. We've checked with the various firms, and their other clients are not having problems. Some pdfs open but with a lot of missing content and strange formatting, others won't open at all.  There are different error messaged depending upon the doc.  Some are regarding the fonts, for example "can't extract the embedded font...."  Others are "insufficient data" errors.  There are more, but for purposes of keeping this short, I won't include them.  Another unrelated issue is that we are having trouble printing excel files to pdf.  The files end up with bad formatting.  I've worked with adobe "chat" support, our IT consultants with no resolution.  I also haven't found any similar "known issue" online  Would very much appreciate any assistance.  Thank you

    The font embedding can be a problem if not done and you are trying to view the PDF and do not have the font on your machine. Acrobat will often try to find a replacement, but it is not always a good choice. Sometimes the "Use Local Fonts" button can be changed in state to resolve some of the viewing issues.
    If you are trying to copy or export info, then it is important that you have the fonts on your system. Otherwise, the message you are getting about embedded fonts would not be showing up.
    As for Excel formatting, be sure that the Adobe PDF printer is selected in the printer screen before you look for the paging and formatting of the file. In most OFFICE programs, if you change the printer the application will reflow the document to best match the printer (called "using printer metrics"). So check before you create the PDF that the layout is correct.

  • EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

    Dear All,
    I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
    I installed Hyperion Foundation. The installation and configuration went through successfully.
    I am facing two problems:
    Problem 1
    When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
    Quote
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
    End-quote
    Problem 2
    Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
    Quote
    The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
    End-quote
    I tried checking everything but can't seem to figure out what's going wrong.
    I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
    http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
    It would be very grateful if someone can have a look and help me.
    Many thanks in advance for any help / pointers / suggestions.
    - Neil

    Hi Pablo,
    Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
    Re: Problem 1
    a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
    -----<start>--------
    <Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:
    ------<end>-----
    I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
    Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
    -----<start>--------
    ####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
    WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
    ####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
    Listen Address          :28080
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
    Listen Address          :28443 (SSL)
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
    >
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
    ####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
    ####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
    ------<end>-----

  • Problems connecting to Windows XP machines on same network after 10.6.3

    Hello,
    It has been a painful experience updating to 10.6.3. One of the issues I am having is after been logged on via WiFi for about 10 minutes I am not able to connect to any of my Windows XP machines on the same network. The only workaround (and a real pain in the rear) is to reboot the MBP.
    I am considering restoring via Time Machine to the previous build if that is going to solve the issues with Windows. Anybody else encountering similar problems after updating to 10.6.3?
    Thanks!
    Marcelo

    Please search the discussions before posting. Questions regarding using ARD with Windows computers have been asked and answered dozens of times. You could save yourself time in the future.
    ARD is for the remote management of Macs only. If you want to control Windows computers with ARD then you'll need to install VNC server software on the Windows machines.

  • Installation XE 11. on Windows x64 ( 64-bit) 2008

    Dear All ,
    I want to know if latest XE edition is certified on Microsoft Windows x64 (64-bit) 2008 OS ?
    We have installed specific version on Windows x64 (64-bit) 2008 OS.
    We get the following error :
    OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
    O/S-Error: (OS 1) Incorrect function. !
    and there is a respective Doc ID :
    Note 1060806.1: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
    Action Plan
    ========
    1. Install 64-bit version of Oracle database software.
    2. Upgrade the database from 32-bit version to 64-bit version.
    Can we use Oracle XE on specific OS ?

    Hello,
    I want to know if latest XE edition is certified on Microsoft Windows x64 (64-bit) 2008 OS ?No. See [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]XE's System Requirements for details.
    Similar error messages have been reported here before, e. g. in {message:id=10665775}.
    It seems possible to get XE started on 64bit Windows, but it might be a hard fight, especially on a server OS with other possible traps..
    Can we use Oracle XE on specific OS ?Sure, all certified 32bit Windows versions or 64bit Linux versions would be fine. See {thread:id=2278170} to get a full report.
    -Udo

  • Installation problem - Oracle 11gR2 Windows XP Professional SP 2

    Hello everybody!
    I have a problem at the installation moment of Oracle 11g R2 on Windows XP Professional Edition with SP 2. Please help me!
    This is my computer's hardware configuration:
    CPU Intel Pentium 4 3.00 Ghz x86
    RAM: 1 GB
    Hard disk: SATA 180 GB
    Graphic Card: PCI-Express nVidia 7300GS 256 MB
    Network connection: LAN / Internet connection: ADSL
    O.S. Windows XP Professional Edition SP 2 (and installed .Net framework 2.0)
    Antivirus: AVG 9.0 free edition
    WEB Browser: Internet Explorer / Mozilla Firefox.
    I tried to Install Oracle 11g R2 2 times, so I have formatted my computer 2 times because after the installation process, the Oracle Universal Installer don't respond.
    Every time I installed the O.S., drivers, Antivirus, .Net Framework, Ms office, everything works properly.
    I configured the network connection to use a fixed IP Address, I created the environment variables ORACLE_BASE, ORACLE_HOME, ORACLE_SID and ORACLE_UNQNAME (1st time its value was the same value of ORACLE_SID, 2nd time its value was the database global name) and then, I start the SETUP program, it run properly, but at the moment of finish the database creation this message appears: execute the commands: 1) define ORACLE_UNQNAME in database unique name 2) emctl.bat start dbconsole.
    Through SQL Plus I can connect to the database, execute queries, the listener is working, but the database console service doesn't work. If I try to start it since command prompt (emctl start dbconsole) I get a message about the specific error 2.
    What can I do??
    Thanks in advance!

    Good morning! I hope you are fine.
    I appreciate your help.
    Jean-Valentin: I opened a DOS box (logged as the Administrator User who installed Oracle), I changed the ORACLE_SID value and the result of the commands:
    set ORACLE_SID=MGN
    emctl stop dbconsole
    emctl start dbconsole
    emctl status dbconsole
    was this one:
    C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl stop dbconsole
    OC4J Configuration issue. C:\Oracle_base\Home_ODB11gR2_Aug1st2010/oc4j/j2ee/OC4J_DBConsole_oraserver11_MGN not found.
    Definitively, change the value of ORACLE_SID is not right. Then, I changed the ORACLE_SID again to its original value and the result was:
    C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl stop dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    The OracleDBConsoleMGN service is not started.
    More help is available by typing NET HELPMSG 3521.
    C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl start dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleMGN service is starting...............
    The OracleDBConsoleMGN service could not be started.
    A service specific error occurred: 2.
    More help is available by typing NET HELPMSG 3547.
    Using the ORACLE_SID original name, at least the emctl shows the OracleDBConsoleMGN as not started when I try to stop.
    schavali: When I executed the Oracle Installation, the database configuration assistant showed this message:
    The Enterprise Manager configuration was success with this warning: Error at start up database control, execute the commands: and you know, here start our history.
    And the 3 steps of the database configuration assistant shows this:
    Copying database files : Success (correct mark)
    Creating and starting up database instance: Success (correct mark)
    Finishing database creation: Success (correct mark)
    I'll try to check the information of the link: http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/structure.htm#CACBBFGI
    and then, I write again.
    This cannot be... Oracle always works properly... is powerful... what is going on???
    Thanks guys, have a great day!

  • J2sdk  installation problem on 64 bit linux machine

    Hi
    when i install the j2sdk then it gives the following error.:
    /j2sdk-1_4_2_13-linux-ia64.bin: line 425: ./install.sfx.8624: cannot
    execute binary file
    PLEASE SUGGEST ANY SOLUTION
    Thanks
    dev

    IA64 is the Itanium architecture. You probably don't have such a machine (if you did, you'd definitely know it).
    If indeed you are running Linux on a 64bit machine chances are pretty high, that you are using a processor that's running the the AMD64 architecture (also called EM64T, x86-64, IA32e, ...). AFAIK only 1.5 is available for that architecture.

  • Problem with booting windows 7 (x32 & x64) on GX623

    Hello
    I have a small problem, I installed on may msi GX623 notebook windows 7 x32 and I see the loading screen for  4 minutes (picture), can I do something  to speed up boot? I don’t want every time wait 4 minutes that he’s booting only.
    And I have problems to install windows x64 (vista & seven) on my notebook, after complete install and restarting of windows x64 he is not booting. The system hangs at the loading screen
    I am already updated my bios and firmware
    Thanks in advance for help

    Quote from: Svet on 22-October-09, 21:40:11
    Does that happen since 1st OS run? Or after some driver{s} or software installation?
    What's W7 version you use? Latest one or?
    Yes, at the first run, and I use the latest final version of w7

  • Installation Problem on Win8

    Hello all
    I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
    Thank you guys for your support.
    Installation Logs:
    java_install.log - Pastebin.com
    java_install_reg.log - Pastebin.com
    JavaDeployReg.log - Pastebin.com

    Hi people!
    I have two problems with nokia suite...
    first of all I can't install it at my windows 8.1, I receive the message attached...
    Second,
    in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
    can somebody help me?
    Attachments:
    mokiasuit.png ‏13 KB

  • C309g disappeared from Windows 7 machine after HP update ran

    We have had a c309g attached via the LAN to a Cisco-LinkSys E3000 since December. Several computers have the printer installed, including a Dell desktop running XP SP3 (connects via LAN), a Dell laptop running Vista Business SP2 (connects wirelessly) and a Dell laptop running Windows 7 (connects wirelessly).
    Last week we got a popup advising HP updates were available and applied them (this occurred on the Windows 7 and Vista machines; not sure aboit the XP machine). After doing so, the printer was no longer accessible from the Win7 machine, and the HP Solution Center on that machine indicated the installation was not complete. The other computers were OK.
    I corrected the problem on the Windows 7 machine by going to
             All Programs -> HP -> PhotoSmart Premium c309g-m -> Add a Device
    then completing the wizard.
    The first question is, why did applying the HP updates corrupt the installation, and only on the Windows 7 machine? Have others had this problem?
    A second question is, how can I view the update history? I have no idea what got updated - was it the Solution Center or the driver (on each individual machine), or the software on the C309G itself? The web interface shows version numbers but no history information, and Solution Center doesn't even have a Help -> About option - you have to re-launch it and write the version down "real quick like a bunny" as my first COBOL instructor used to say way back when Hector was a pup (yes, he used to say that, too).

    +You can always rewrite the internal BIOS regardless which version you have now. Just make sure you checked all the settings in this program.
    Go back into the BIOS settings, then find the optical drive. Make sure it is not disabled there, select IDE-ATA or maybe SATA. Don't forget to save the settings on exit.
    After you will start the Windows, go to the Device Manager, right-click on your PC name, and select Scan for hardware changes.+
    I have tried to rewrite it with the .exe BIOS file, which I got from the official link. But when I start that file it stops, saying that the version I try to install is not newer than the actual one. If there is any other way I could use this .exe BIOS file to rewrite my BIOS, please let me know. I couldn't figure it out so far. In the old times I just made a bootable floppy disc with the BIOS files on it and it worked, never told me not to install an older version or anything like that. But now this InsydeFlash doesn't let me do that.
    I can't find the optical drive in the BIOS. Anyway, there is a setting there, so I tried to change that setting from AHCI to IDE(Compatibility), but no result.
    The Device Manager in Windows still not able to find it.
    By the way, what could that yellow light on the DVD drive mean? It turns on as soon as I switch my laptop on.
    Edit: I managed to extract the individual files from the 7-Zip .exe, I changed the flag, so it didn't check the BIOS versions anymore, then I did rewrite the BIOS to the original version (which was active when I bought the laptop), the DVD drive is not visible anywhere, everything else is fine. So I guess it is a hardware problem afterall, it wasn't a BIOS, so it has to go and get repaired.
    Message was edited by: tdquasar

  • Adobe Flashplayer installer not working with Windows 8.1 and Firefox

    I am running Windows 8.1 and attempted to download Flashplayer for Firefox.  I have it working in IE, but it will not launch for Firefox.  Any ideas on what might be blocking the Flashplayer installer from running in Windows 8.1?

    Hi sfmedic,
    Have you tried to download another installer to have a check ?
    Here are several links may be helpful to troubleshoot this issue:
    Flash Plugin - Keep it up to date and troubleshoot problems
    https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
     Flash Player Help / Installation problems | Flash Player | Windows
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Considering it can be installed in the Internet Explorer ,this issue is related to the Fire Fox. It is recommended to look for help from the Fire Fox forum.
    Best regards

  • Camera raw 5.4 installations problems

    Hi everyone.
    I have an installation problem with CS4 windows 32-bit, the version is compatible with both 64-bit and 32-bit but Im getting an error
    that it only gives me the option to hit the quit button, I don't know why.
    does anyone had this problemmm??
    thanks!!

    Your post is not a model of clarity.
    At what stage of doing what does this "Quit" message appear?
    It sounds as if you have installed the plug-in incorrectly. Did you follow the instructions exactly?
    The slightest false step and you are in trouble.

  • Adobe Reader XI Installation Problem

    I just performed a fresh reload of Windows XP SP3 on one of my computers. After downloading and running the installer for Adobe Reader XI I get the following error pop up:
    Internet Explorer Script Error
    An Error has occurred in the script on this page.
    Line:     1
    Char:    10570
    Error:    'ActionLaunchReader' is undefined.
    Code:    0
    URL:     http://127.0.0.1:2469/app/_js/adobe.js
    Again I am running Windows XP SP3 with all the patches applied, JRE 7u10 (set as the default for both IE and Firefox), and scripting is enabled in Internet Explorer. I get the exact same error when trying to install the latest version of Adobe Flash Player as well, however, Adobe Shockwave installed just fine.
    I am new to this forum, so forgive me if this problem has been posted before. I did not find anything similar in a search. Any help would be greatly appreciated!
    Message was edited by: fd2849 Corrected spelling errors.

    Yes: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

  • Can I move  Illustrator 10.0.3 &  Photoshop 7.0 to my new Windows 7 machine?

    I have Adobe Illustrator 10.0.3 and Adobe Photoshop 7.0 installed on a Windows XP machine.  I want to move both installations to my new Windows 7 machine. I do not have my original installation disks.  How can I move these two installations to the Windows 7 machine?  Thanks in advance...

    You cannot "move" them  because you somehow would have to serialize/ license them and aside from al lsorts of tricks that can only be done with a proper install. Some users have successfully installed PS7 in compatibility mode and turning off all security stuff, but Illu 10 is a hopeless case. It's not compatible as Arpit said. In any case, you'd still have to find the installers somewhere. Adoeb does not provide downloads of that old stuff...
    Mylenium

  • Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Have you completed all windows update including service Pack1?  If not, please complete all the windows update then follow steps below to re-install all over.
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime  
    Apple Software Update  
    Apple Mobile Device Support  
    Bonjour  
    Apple Application Support
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Maybe you are looking for