Installation problem on Intel - IV Machine

Hi,
I am having Intel P-IV machine, with 845 motherboard, sdram, seagate hdd and tnt vga. when i am trying to install solaris 8 in my machine after proceding upto booting from disk (or) cdrom i have selected cdrom then, when i say 1. Interactive or 2. Jumpstart, after selecting Interactive Installation my system is rebooting automatically.
Can any one tell me the solution regarding this issue.
Thanks in advance,
Mohammed Abid Ali

This case is similar to the case handled by Jurgen Keil on Digest Number 385 except that my case, it has a different error message.
At the prompt "Select type of installation" (or the prompt
"Select (b)oot or (i)nterpreter:", I type the command "b kadb -d". I see a General Protection Fault and some messages which cause the system to reboot. But I can't capture all the errors/messages cuz there's no system dump device configured.
How do I configured the system dump device so I can send you more details?
Thank you.

Similar Messages

  • Installation problem on Intel

    I have tried to install Solaris 8 on my Dell machine.
    I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
    The first screen says this....
    SunOS Secondary Boot version 3.00
    WARNING: ACPI Tables not in Reclaim Memory
    prom_panic: kmem_free block already free
    Entering boot debugger:
    [130ee5]:
    and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
    I don't know what the ACPI tables are .. and how i can fix this...
    Anyone who knows this... please help..
    Thanx a lot..

    I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

  • Installation problems on Intel Mac. claims PPC

    I'm trying to install the current Flash Player 10.2 on my Macbook 6,1 (Intel Core 2 Duo, 2.26GHz) with 4GB RAM, running OSX 10.6.6
    Browser is Firefox 3.6.13 {Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13}
    I got the installer from http://get.adobe.com/flashplayer/
    The installer puts up a message: "Devices with PowerPC processors are no longer supported"
    How can I convince the installer that this isn't a PPC machine ?  Why might the installer think so ?

    Hi, What browser are you using to try to Uninstall/Install FP vs 10.2? And when you Install 10.1, what browser are you using?
    There is no Flash Player support for a 64bit browser. I have been very busy on the Forum and have not had time to check on the 10.3 beta. Not sure what it refers to. Have you? Just asking as I've seen it mentioned on another thread, but it's from those complaining about 10.2 not working. Why anyone would want a beta Installed unless they are involved in the testing and are Developers I don't know.
    Any beta is a work in progress, so as long as a user is aware of that it's ok with me. Microsoft has their IE9 in beta too, but with an beta one can expect problems.
    Since the 10.2 is not Installing, then I don't think you'd receive any code, do you?
    I'm not as familiar with the Mac, but is it possible to upgrade the OS from a PPC to the edition you have now?
    I'm going to check a couple of things while you let me know on the above browser info. Also any comments would be welcome:-)
    Thanks,
    eidnolb

  • Installation problem on Dell P4 machine...

    While I was trying to install Solaris 8 to a Dell P4 machine (8100 series), after the "Copyright..." line, the installation process never gets to the section where it should display "Configuring /dev and /devices".
    Each time the installation gets to the menu to choose the installation method (Interactive or JumpStart), after running a few more processes, the system displays "Skipping System Dump: No dump device configured" and then the machine reboots. It keeps doing the same thing over and over but I do not see any error message and the screen clears rigth away when it reboots.
    Any help would be appreciated.

    This case is similar to the case handled by Jurgen Keil on Digest Number 385 except that my case, it has a different error message.
    At the prompt "Select type of installation" (or the prompt
    "Select (b)oot or (i)nterpreter:", I type the command "b kadb -d". I see a General Protection Fault and some messages which cause the system to reboot. But I can't capture all the errors/messages cuz there's no system dump device configured.
    How do I configured the system dump device so I can send you more details?
    Thank you.

  • Installation problem in intel baised soloris

    i tried to install Sun Soloris 7 on my pc but in the installation a problem occured like on this screen where you have to select the installation type .
    No matter what i select i got this error at first the screen scrolls for a sec then.
    Panic :Page fault cpu 0
    rebooting
    Bad trap
    page fault
    Can you help me out here ???

    In reply to Mar & May 2000:
    Check the system and video boards against the Hardware Compatibility List at http://access1.sun.com
    In reply to the 18 Sept 2000 post:
    You need to boot the system to the Device Configurastion Assistant Floppy that should be included in you media kit. Solaris is not a program that installs under windows or any other OS. It is an OS in itself and in order to set up a system to run it and another OS you will need to dual boot the system. The documentation cdrom has several of the Install documents in html format, just be sure your existing OS supports long pathnames or you will have to use the "File -> Open" method of browsing.
    Hope it helps!

  • Someone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

    omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

    It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
    Thank you for your answer
    Majo

  • Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

    Dear all
    I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
    Oracle OUI .runInstaller collapsed with such a following error:
    An unexpected exception has been detected in native code outside the
    VM.
    Unexpected Signal : 11 occurred at PC=0x8077470
    Function=[Unknown.]
    Library=(N/A)
    Is there anyone can help me ??

    Check pushitz website and ensure that you have all the required rpms installed properly.
    Check the log files in the installation directory. That should give some more details as to what exactly is going on.

  • 8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

    Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
    Thanks.
    CNguyen
    [email protected]

    ================================================================
    Doc ID:
    Note:131299.1
    Subject:
    Oracle Installer 8.1.X Hangs on Machines with Pentium 4
    Processors
    Type:
    ALERT
    Status:
    PUBLISHED
    Content
    Type:
    TEXT/PLAIN
    Creation
    Date:
    02-JAN-2001
    Last
    Revision Date:
    18-APR-2001
    This alert was modified 16-January-2001 by specifying specific
    Oracle Universal
    Installer Versions in the the Versions Affected section.
    Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
    with Pentium 4
    Processors
    ~~~~~~~~~~~~~~~~~~
    Versions Affected
    ~~~~~~~~~~~~~~~~~
    Oracle 8.1.5
    ============
    Oracle Universal Installer 1.6.0.9.0
    Oracle 8.1.6
    =============
    Oracle Universal Installer 1.7.0.19.0
    Oracle 8.1.7
    ==============
    Oracle Universal Installer 1.7.1.9.0
    Platforms Affected
    ~~~~~~~~~~~~~~~~~~
    Any platform that uses the Intel Pentium 4 processor, with the
    Sun JRE
    and Symmantec JIT will encounter this problem. Windows NT,
    Windows 2000
    and NetWare platforms are confirmed to be affected.
    Description
    ~~~~~~~~~~~
    When installing Oracle Products with the Oracle Universal
    Installer (8.1.x)
    on machines that use the Sun JRE and Symmantec JIT, the
    installer hangs.
    Specifically for the Windows platform, the following version
    of the Symmantec
    JIT or earlier will encounter the failure:
    Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
    1.2.
    Details regarding this issue can be found at:
    http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
    How to determine if you have Symmantec Java for JDK 1.2:
    1. Select the file "symcjit.dll" and right click on it.
    2. Select Properties, then the Version tab.
    3. Under Microsoft Windows*, the properties of the DLL are:
    "Symantec Java! JustInTime Compiler Version 3.10.107 for
    JDK 1.2 Copyright (C)
    1996-99 Symantec Corporation Dynamic Link Library file".
    DLLs older than this will also not work. "
    Likelihood of Occurrence
    ~~~~~~~~~~~~~~~~~~~~~~~~
    Any platform that uses the Intel Pentium 4 processor, with the
    Sun JRE
    and Symmantec JIT will encounter this problem. Windows NT,
    Windows 2000 and NetWare platforms are confirmed to be
    affected.
    Possible Symptoms
    ~~~~~~~~~~~~~~~~~
    The failure typically is that the affected application simply
    terminates.
    Workaround
    ~~~~~~~~~~
    Not only will OUI be affected by this bug, most of the
    post-install
    configuration tools will also be affected. Running these
    tools with "-nojit"
    specified will avoid the hang, but it is not simple to specify
    "-nojit" for
    some of the products.
    The following workaround works for the Windows operating
    system:
    a. Copy only the install directory from the CD to the hard
    disk ,say, e:\temp.
    b. Open oraparam.ini and make the following modifications
    (Assuming CD
    drive is f:)
    * Change the "SOURCE=" line to use the full path to the CD
    instead of a
    relative path. (i.e., SOURCE=f:\stage\products.jar)
    * Change the "JRE_LOCATION" line to use the full path to the
    CD instead of a
    relative path. (i.e.,
    JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
    \Expanded)
    * Change the "OUI_LOCATION" line to use the full path to the
    CD instead of a
    relative path. (i.e.,
    OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
    iles\Expanded
    * Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
    first argument.
    (i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
    ^^^^^^
    * Other entries should remain the same
    c. Launch setup.exe from the temporary location on your hard
    drive (i.e.
    e:\temp\install\win32\setup.exe). This will use the
    modified
    oraparam.ini and pick up the information from the CD since
    the absolute
    locations are specified.
    Choose a Custom install and choose not to create a database
    during the
    install. This way, the Database Configuration Assistant will
    not be launched
    during installation.
    The Net8 Configuration Assistant will still be launched, and
    there is no way
    to suppress it. You will need to kill the Net8 Configuration
    Assistant if it
    hangs due to the bug. The installation still will have been
    successful, and
    you can run the DBCA and NetCA after installation.
    To kill NetCA if it hangs during installation:
    In the "Configuration Tools" window, highlight the "Net8
    Configuration
    Assistant" and click "Stop". If that does not work, look for
    the most recent
    JRE process using the Task Manager, and kill it manually.
    NOTE: the OUI
    itself will also have a jre process. Be sure to kill the one
    with the most
    recent date, which should be the jre process being used for
    Net8CA, not the
    one for OUI itself.
    After killing the configuration tools and continuing through
    the installation
    to the "End of Installation" screen, you should modify the
    configuration tools
    to use "-nojit", then call the appropriate tools from the
    Start Menu.
    Once installation is complete, each of the following files in
    the ORACLE_HOME
    needs to be modified:
    assistants\dbca\dbassist.cl
    assistants\dbma\dbmig.cl
    assistants\ifa\ifa.cl
    bin\elogin.cl
    bin\owm.cl
    ldap\oidamdin\oidadmin.cl
    network\tools\netasst.cl
    network\tools\netca.cl
    owm\install\instelogin.cl
    owm\install\instowm.cl
    Edit the contents of the above files to add "-nojit" as shown
    below:
    Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
    -classpath ....
    this is the only thing you need to add --> ^^^^^^
    Then, launch the necessary tools, like Net8CA and DBCA from
    the Start Menu.
    Patches
    ~~~~~~~
    Currently there is not a patched installer available to deal
    with this
    problem, the workaround listed above must be used.
    References
    ~~~~~~~~~~
    [BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
    (IV) PROCESSORS
    [BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
    PENTIUM 4 (IV) PROCESSORS
    @[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
    PROCESSORS
    Oracle
    Support Services.
    Copyright (c) 1995,2000 Oracle Corporation. All Rights
    Reserved. Legal Notices and Terms of Use.
    ================================================================
    The solution of making a local copy of the installation CD on
    the hard disk and renameing symcjit.dll to symcjit.old does
    work to allow installation of Oracle Client 8.1.7 on a Pentium 4
    This function is useful and you can find two file to rename
    ===============================================================
    Windows ME
    Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
    Oracle does not support installing version 8.1.7 PE into
    Windows Millennium.
    As an unsupported workaround, you may add the following line
    to the [compatibility95] section of win.ini prior to
    installation:
    Jrew=0x00080000
    After setup is complete, Oracle will recommend a reboot.
    There is one additional step necessary prior to reboot;
    Oracle may add a non-standard path statement to the
    autoexec.bat file. Please modify this SET PATH
    statement to use short-filenames if you find a quoted
    LFN string represented as part of the path. You can
    confirm that the path was merged successfully into the
    registry after reboot by examining the PATH variable
    in the registry at
    HKLM\System\CurrentControlSet\Control\SessionManager\Environment
    Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
    Please note that Oracle does not support the use of this
    product in Windows ME, but have authorized these workarounds
    for testing purposes only.
    ===============================================================
    Windows XP Home Edition
    Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
    You can install Oracle8i on windows XP Home Edition, try like this:
    1 - Copy your Oracle CD into hard disk in your
    machine. For example Copy from oracle8i CD into C:\Oracle\ ...
    2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
    C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
    \DataFiles\Expanded\jre\win32\bin\symcjit.dll
    3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
    4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
    ===============================================================
    When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
    1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
    2. Install the java file.
    There is also a problem in the installation disk.
    3. Make a copy of the Oracle 8i disk on the local hard disk.
    4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
    5. Install Oracle from the win32 directory.
    ================================================================
    PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

  • Installation problem for Java EE 5 SDK Update 2

    Hi ,
    I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
    http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
    Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
    Thanks in advance.

    For the difference between Java EE and Java SE read here:
    http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
    For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
    http://forum.java.sun.com/thread.jspa?threadID=738559
    Andrea

  • Installation problem w/Vista

    Boot Camp/Vista installation problem
    MacBook 2GHz Intel Core 2 Duo, 2GB RAM, Snow Leopard 10.6.2.
    Trying to install Windows Vista Home Premium using Boot Camp.
    Started Boot Camp Installer and created 32GB partition. Inserted Vista disk as instructed and clicked on Start Installation.
    Black screen appeared looking like this:
    1.
    2.
    Select CD-ROM Boot Type: _
    That last underline was flashing, waiting for input.
    First off, I don't know what to type in, but . . .
    The keyboard appears to be disabled because no keystroke registers, nor Return/Enter. Even pressing caps lock or num lock fails to register a light on those keys.
    The only way out is to hold down the power key until shutdown, then restart with Eject key depressed to eject Vista disk.
    Any suggestions would be appreciated.

    Hi RebelGood,
    have a look here http://forums.macrumors.com/showthread.php?t=467704 for instructions/solution.
    Basically you have to make yourself a copy of your Vista disc using the files of that disc and a programm called oscdimg.exe plus a burning program.
    And it had to be done on a Windows PC or in virtualized Windows (using Parallels/Fusion/VirtualBox) on your Mac.
    Regards
    Stefan

  • Installation problem under AIX 5.3 with Oracle 10g

    Hello,
    I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
    In ImportMonitor.Console.Log i have the following errors:
    Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
    Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
    Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
    Loading of 'SAPSSEXC_4' import package: ERROR
    Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
    Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
    Inside SAPSSEXC_4.log i have the following errors:
    /usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: T512CLU deleted/truncated #20071130102908
    myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
    myCluster (63.20.Imp): 656: return code received from nametab is 2
    myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    Under SAPPOOL i have:
    usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: ATAB deleted/truncated #20071130102908
    failed to read short nametab of table AT01                           (rc=2)
    (CNVPOOL) conversion failed for row 0 of table  VARKEY = ã ±ã ±ã °â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
    Do you have any idea how can i procceed with the errors?
    Thank you in advance
    Thanasis Porpodas

    Hi,
    look at sap note 921593 and search for myCluster ,
    read that section following is a part of that note.
    Symptom:
    During the import into a UNICODE system the following error occurs
    (for example in the SAPCLUST.log):
    myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
    myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
    myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
    myCluster (63.2.Imp): 1927: logic table is canonical.
    myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
    myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
    myCluster: CLU4       *00001*
    myCluster (63.2.Imp): 319: error during conversion of cluster item.
    myCluster (63.2.Imp): 322: affected physical table is CLU4.
    (CNV) ERROR: code page conversion failed              rc = 2
    |
    |                              RSCP - Error
    | Error from:            Codepage handling (RSCP)
    | code:  128  RSCPENOOBJ   No such object
    | Dummy module without real rscpmc[34]
    | module: rscpmm  no:    2 line:    75          T100: TS008
    | TSL01: CPV  p3: Dummy-IPC   p4: rscpmc4_init
    `----
    Cause:
    This problem is caused by incorrect data which should have been removed from the source system before the export.
    Solution:
    There are two possible workarounds:
          1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
                  search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
          2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
                  search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

  • Is After Effects CS5.5 PowerPC-only? (Installation Problem)

    I just installed Adobe Creative Suite 5.5 Production Premium on a new (2012) Mac Mini (Intel Core i7 processor) running OS X Mountain Lion 10.8.2.  Most of the apps installed correctly, but After Effects CS5.5 gives me the following error when I try to launch:
    You can't open the application "Adobe After Effects CS5.5" because PowerPC applications are no longer supported.
    I tried uninstalling and re-installing the app (along with Flash Catalyst, which also fails), but the error remains. What's the deal here? Is it an installation problem, or is After Effects CS5.5 truly incompatible with my new hardware/OS?  Any suggestions appreciated.

    Okay, answered my own question.  I was installing on a Mac Mini, which doesn't have an optical drive, so I was using a remote optical drive to install across my network.  Turns out that confused the installer.  I ended up copying the install DVD onto a flash drive and installing from that.  Problem went away.

  • V570 problem with Intel onboard driver on Windows 7 Pro 64 bit

    Hello Everyone, 
    I recently installed Windows 7 Pro 64 bit on my Lenovo v570. I downloaded the drivers from the support page and I have a strange problem with the onboard graphics driver "Intel Onboard Graphics Driver for Microsoft Windows 7 (64-bit) - Lenovo B470, B570, V370, V470, V570" in the drivers section.
    Installation seems fine, but after restart, the system fails to boot and goes into boot recovery mode, where I get a message saying that booting failed due to a bad driver and the only actual option I have to boot up is to go back to a previous restore point. I tried installing the Nvidia driver for Windows 7, but it says that I need to install an Intel driver first, which is the one that gives me the blue screen when booting. I have also tried installing both drivers without a restart between both installations, but that didn't help.
    I am wondering if anyone in the community has seen something similar. Any advice, information or assistance will be highly appreciated. Thank you very much in advance for your time.
    Best regards,
    Moe.
    Solved!
    Go to Solution.

    Welcome to the Lenovo Community !
    Check out the link I have posted below for video driver installation problems on your model.  The suggestions offered have worked for others.
    http://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/V570-video-drivers-don-t-work-with-Windows...
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • SQL Developer Installation Problems

    Hi,
    We are trying to find a workable alternative to TOAD and have tried to install SQL Developer with not much success.... I think I am just about to give up but hope this last attempt to post for help can create a miracle.
    I would appreciate very much if any one knows of a comprehensive document out there that can help trouble shoot the installation problems.
    Let me give you the hardware and software versions first and then the problems.
    1) SQL Developer tried: sqldeveloper-1.2.1.3213-no-jre and sqldeveloper-1.2.1.3213
    2) JRE tried: JRE 1.5 and JRE 6 (C:\Program Files\Java\jre1.6.0_03)
    3) Window: XP Professional version 2002 Service pack 2
    4) Hardware: Intel Pentium 4 CPU 2.80 GHz, 1.98 GB of RAM
    Problems:
    1) SQL Developer could not find native JDBC. I don't understand why, despite all the variables set in Oracleclient10g_basic in the registry, SQL Developer did not seem to be able to find a 10g client on a network drive. I have to install 10g client directly onto my pc (C:\oracle\product\10.2.0\client_1) to solve this problem.
    2) SQL Developer abruptly disappeared after database login.
    I was able to connect and log into an Oralce 10g database with TNS Connect Identifier approach. There were objects (tables, views, etc) showed up briefly on the left hand side of the SQL Developer and then it just completely disappeared without even an error message or a tearful good-bye.
    The only thing I can find is this error log about EXCEPTION_ACCESS_VIOLATION. After hours searching through OTN for possible mentioning of this error with SQL Developer, I found nothing so far.
    Why is it so difficult to install SQL Developer? Are there a set of un-spoken pre-requisites that has to be satisfied before it can be installed properly? If so, what are they? Path system variable? Registry? Anything else?
    Here's the complete EXCEPTION_ACCESS_VIOLATION error log:
    # An unexpected error has been detected by Java Runtime Environment:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x2ca5683c, pid=952, tid=2576
    # Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
    # Problematic frame:
    # C [OraOCIEI10.dll+0x4f683c]
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x04330400): JavaThread "Init Insight" [_thread_in_native, id=2576]
    siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
    Registers:
    EAX=0x31a28e40, EBX=0x00000000, ECX=0x03231622, EDX=0x00000000
    ESP=0x04b0f168, EBP=0x04b0f1a8, ESI=0x00000001, EDI=0x0413ded4
    EIP=0x2ca5683c, EFLAGS=0x00010297
    Top of Stack: (sp=0x04b0f168)
    0x04b0f168: 00000001 00a3fb8e 0000000a 00000001
    0x04b0f178: 0413c78c 00000001 02c52aa8 0000000a
    0x04b0f188: 00000020 00a4047e 090ea038 0413def4
    0x04b0f198: 03231622 6d8a87b3 032325c1 0413c78c
    0x04b0f1a8: 04b0f1d8 2ca57072 0413ded4 032325c1
    0x04b0f1b8: 00000001 00000000 03231620 03231622
    0x04b0f1c8: 00000000 00000000 00000000 00000000
    0x04b0f1d8: 04b0f234 2ca56e06 0413c78c 0413ded4
    Instructions: (pc=0x2ca5683c)
    0x2ca5682c: 5c 00 a1 80 58 b3 31 88 9f c4 00 00 00 8b 14 98
    0x2ca5683c: 8b 0a 81 e1 00 80 00 00 89 4d dc 0f 85 90 03 00
    Stack: [0x04ac0000,0x04b10000), sp=0x04b0f168, free space=316k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [OraOCIEI10.dll+0x4f683c]
    C [OraOCIEI10.dll+0x4f7072]
    C [OraOCIEI10.dll+0x4f6e06]
    C [OraOCIEI10.dll+0x419685]
    C [OCI.dll+0x7333]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe(Loracle/jdbc/driver/OracleStatement;JIIIZZZZ[BIBII[SI[B[CII[SII[B[CII[I[S[BIIIIZZ[Loracle/jdbc/driver/Accessor;[[[B[J[BI[CI[SIZ)I+0
    j oracle.jdbc.driver.T2CCallableStatement.executeForDescribe()V+271
    j oracle.jdbc.driver.T2CCallableStatement.executeForRows(Z)V+41
    j oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()V+275
    j oracle.jdbc.driver.OraclePreparedStatement.executeInternal()I+94
    j oracle.jdbc.driver.OraclePreparedStatement.execute()Z+17
    j oracle.jdbc.driver.OracleCallableStatement.execute()Z+60
    j oracle.dbtools.raptor.insight.CompletionInsight.getInsightableOracleDatabase(Loracle/javatools/db/Database;)Loracle/dbtools/raptor/insight/InsightableDatabase;+70
    j oracle.dbtools.raptor.insight.CompletionInsight.<init>(Loracle/ide/Context;Loracle/javatools/db/Database;)V+161
    j oracle.dbtools.sqlworksheet.sqlview.SqlEditorMainPanel$5.run()V+52
    j java.lang.Thread.run()V+11
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    =>0x04330400 JavaThread "Init Insight" [_thread_in_native, id=2576]
    0x0416ac00 JavaThread "Timer-4" [_thread_blocked, id=1460]
    0x0412cc00 JavaThread "Timer-3" [_thread_blocked, id=2544]
    0x04323800 JavaThread "WeakDataReference polling" [_thread_blocked, id=3756]
    0x0315cc00 JavaThread "Image Fetcher 3" daemon [_thread_blocked, id=3412]
    0x02c17c00 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=2124]
    0x04324800 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=2088]
    0x04321800 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=276]
    0x02ca2c00 JavaThread "WaitCursorTimer" daemon [_thread_blocked, id=2096]
    0x00296800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3816]
    0x02cb0400 JavaThread "Timer-1" [_thread_blocked, id=2832]
    0x02c32000 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1204]
    0x04060800 JavaThread "Log Page Updater" [_thread_blocked, id=2160]
    0x03323800 JavaThread "TimerQueue" daemon [_thread_blocked, id=3996]
    0x032d1800 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4004]
    0x032ca400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1488]
    0x032c9800 JavaThread "AWT-Shutdown" [_thread_blocked, id=256]
    0x032c8400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1064]
    0x02c0d000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2956]
    0x02c08400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3236]
    0x02c07400 JavaThread "Attach Listener" daemon [_thread_blocked, id=3248]
    0x02c06800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3232]
    0x02bfe400 JavaThread "Finalizer" daemon [_thread_blocked, id=2328]
    0x02bfd400 JavaThread "Reference Handler" daemon [_thread_blocked, id=1668]
    Other Threads:
    0x02bfc000 VMThread [id=2868]
    0x02c0e800 WatcherThread [id=2940]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 1536K, used 500K [0x06960000, 0x06b00000, 0x090c0000)
    eden space 1408K, 26% used [0x06960000, 0x069bd3b0, 0x06ac0000)
    from space 128K, 100% used [0x06ac0000, 0x06ae0000, 0x06ae0000)
    to space 128K, 0% used [0x06ae0000, 0x06ae0000, 0x06b00000)
    tenured generation total 19372K, used 12857K [0x090c0000, 0x0a3ab000, 0x26960000)
    the space 19372K, 66% used [0x090c0000, 0x09d4e400, 0x09d4e400, 0x0a3ab000)
    compacting perm gen total 22272K, used 22205K [0x26960000, 0x27f20000, 0x2a960000)
    the space 22272K, 99% used [0x26960000, 0x27f0f780, 0x27f0f800, 0x27f20000)
    ro space 8192K, 62% used [0x2a960000, 0x2ae614a8, 0x2ae61600, 0x2b160000)
    rw space 12288K, 52% used [0x2b160000, 0x2b7a7278, 0x2b7a7400, 0x2bd60000)
    Dynamic libraries:
    0x00400000 - 0x00423000      C:\WINDOWS\system32\java.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x7c340000 - 0x7c396000      C:\Program Files\Java\jre1.6.0_03\bin\msvcr71.dll
    0x6d7c0000 - 0x6da0a000      C:\Program Files\Java\jre1.6.0_03\bin\client\jvm.dll
    0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d310000 - 0x6d318000      C:\Program Files\Java\jre1.6.0_03\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d770000 - 0x6d77c000      C:\Program Files\Java\jre1.6.0_03\bin\verify.dll
    0x6d3b0000 - 0x6d3cf000      C:\Program Files\Java\jre1.6.0_03\bin\java.dll
    0x6d7b0000 - 0x6d7bf000      C:\Program Files\Java\jre1.6.0_03\bin\zip.dll
    0x6d000000 - 0x6d1c3000      C:\Program Files\Java\jre1.6.0_03\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x6d2b0000 - 0x6d303000      C:\Program Files\Java\jre1.6.0_03\bin\fontmanager.dll
    0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
    0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\shell32.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
    0x5d090000 - 0x5d12a000      C:\WINDOWS\system32\comctl32.dll
    0x77b40000 - 0x77b62000      C:\WINDOWS\system32\Apphelp.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x03850000 - 0x0386a000      C:\sqldeveloper-1.2.1.3213-no-jre\sqldeveloper\ide\lib\idenative.dll
    0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
    0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_03\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x6d590000 - 0x6d599000      C:\Program Files\Java\jre1.6.0_03\bin\nio.dll
    0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
    0x6d220000 - 0x6d243000      C:\Program Files\Java\jre1.6.0_03\bin\dcpr.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
    0x50d50000 - 0x50d98000      C:\WINDOWS\system32\NETWIN32.DLL
    0x50d00000 - 0x50d15000      C:\WINDOWS\system32\CLNWIN32.DLL
    0x50df0000 - 0x50e10000      C:\WINDOWS\system32\LOCWIN32.DLL
    0x50db0000 - 0x50ddc000      C:\WINDOWS\system32\NCPWIN32.dll
    0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
    0x66220000 - 0x6622c000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
    0x66250000 - 0x66257000      C:\WINDOWS\system32\NWSRVLOC.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x6d560000 - 0x6d569000      C:\Program Files\Java\jre1.6.0_03\bin\management.dll
    0x62f00000 - 0x62f13000      C:\oracle\product\10.2.0\client_1\ocijdbc10.dll
    0x03e50000 - 0x03ea7000      C:\oracle\product\10.2.0\client_1\OCI.dll
    0x2c560000 - 0x31bf6000      C:\oracle\product\10.2.0\client_1\OraOCIEI10.dll
    0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
    0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
    VM Arguments:
    jvm_args: -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.conf=sqldeveloper.conf -Dide.home.dir.name=.sqldeveloper
    java_command: oracle.ide.boot.Launcher
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=C:\oracle\product\10.2.0\client_1;X:\oracle10g\product\10.2.0\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\IDM Computer Solutions\UltraEdit-32
    USERNAME=leexx255
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 9, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 2079468k(1385300k free), swap 4021668k(3516444k free)
    vm_info: Java HotSpot(TM) Client VM (1.6.0_03-b05) for windows-x86, built on Sep 24 2007 22:24:33 by "java_re" with unknown MS VC++:1310
    Is this a java problem? SQL Developer problem? Or something else?
    Thanks in advance,
    a TOAD lover

    The problem you are seeing (the EXCEPTION_ACCESS_VIOLATION) is a result of a version mismatch between the JDBC driver being used by SQL Developer and the Oracle client that is found on the path.
    This issue only occurs when trying to use the OCI version of the JDBC driver. The simplest fix is to switch to using the basic connection type and thus using the thin (all Java) JDBC driver. As no Oracle client is required in this case, the version mismatch won't be an issue.
    However, the connection approach you are using should work, and if you wish to try to sort out the problems there, we should be able to further diagnose the underlying cause of the version mismatch.
    To do this, I would need to see what SQL Developer thinks are the potential Oracle client installs, as well as which install it ends up picking. Can you copy/paste the output in the Log Window (Logging Page) that is present after SQL Developer starts (but before you attempt to connect to any database)? There should be a whole series of entries like 'Checking for ORACLE_HOME environment variable' and 'Checking JDBC driver at <some path>'
    These log entries are output by SQL Developer as it tries to sort out the various bits of information about Oracle client installs and thus give a peek at the selection logic being used.
    Oh, and also - the value of your PATH variable would be useful as well. It may be that there is an Oracle client install on the PATH that supersedes the install SQL Developer is finding via the registry or ORACLE_HOME variable.
    - John McGinnis
    SQL Developer Team

  • Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me?  Thanks a lot.

    Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me?  Thanks a lot.

    See #Q1 in Using Time Machine with a Time Capsule. 
    If you have a problem, please tell us exactly what, and on which step there.

Maybe you are looking for