Installation problem on W2k computers with Pentium 4 CPU
The installation of Discoverer 4.1.37 stops before it is finished and says - Installation successful!
Every unnecessary service is stopped prior to installation,
The almost installed application can't start and generates and application error in Windows when I try.
This event only occurs on computers with an Intel Pentium 4 processors....!
Anyone else? Patch for this? Workaround?
You can look at the intel support site. They have the explanation and the solution for that problem. The problm i's related to a file named sys*.dll. They tel you exactly what file it's the poblem and How you can obtain a new version of that file.
Hope this helps
Similar Messages
-
Xp_logininfo "Installation problem on windows 2003 with Sql 2005"
Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
SohailHi All,
This would solve your problem
First of all this error is <b>MSSQL error</b>.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason -
Oracle 8i installation problem on Win XP pro, Pentium 4
I am trying to install oracle 8i on Pentium 4 PC, Win XP professional Operating system, 512MB RAM.
When I run setup.exe then it is silent, no response.
I installed java J2SDk1.4.0 standard edition, and Java runtime environment. It is still the same problem.
Would you please let me know what should I do ??
Thanks.
MohammadWell
1. Copy the entire contents of your Oracle8i cd into hard disk. The folder can be any name but not "oracle"
2. Do a find files in the local hard disk where oracle files is copied in Step 1. Look for --> jit
3. Rename the file to something like jit_old
4. Run the installer. It should work now.
But better check on web there might be some issues related to java later when u need to install java software into the PC.
Happy install -
9i's Oracle Universal Installer problem in W2K server! Please Help.
Hi all,
I am trying to install Oracle database 9i on my w2k server (domain controller). The Oracle Universal Installer quits right after I choose install in autorun menu with this message:
'Error in writing to directory C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall. Please ensure that this directory is writable and has at least 25 MB of Disk Space. Installation could not continue.'
I am installing as the administrator of the domain/server and I have 17GB left on my harddisk. I am using a P3 600 with 384 MB of RAM. My HD is Seagate ATAIV Baracuda and my motherboard uses VIA chipset.
Thanks in advance for your help.
Regards,
HartonoI am using Diamond TNT2 video card. I have tried to install new (not newest) detonator drive and VIA 4 in 1 driver ver4.29 but it still gives me the error. Would it help if I install Java2 runtime on this computer?
Regards,
Ari -
Oracle application 11.5.10.2 installation problem on xp sp2 with cygwin
Hi all,
lam trying to install ORA APPS on xp but the rapidwiz stopped at step 3 and freezed. rapidwiz didn't give me an error while running but didn't continue to step 5 and below part of my log which shows no error unless the connection failed but it continued and connected by another way
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:19
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
addlnctl.cmd exiting with status 0
Starting the Listener - cmd /c d:\oracle\visdb\9.2.0\appsutil\scripts\VIS_maher\addlnctl.cmd start VIS
ECHO is off.
ECHO is off.
Sun 07/08/2007 11:08 AM
ECHO is off.
ECHO is off.
Sun 07/08/2007 11:08 AM
VIS_maher.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\visdb\9.2.0
LOCAL : VIS
ORACLE_SID :
PATH : d:\oracle\visdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\visdb\9.2.0\bin;d:\oracle\visdb\9.2.0\jre\1.4.2\bin;d:\oracle\visdb\9.2.0\jre\1.4.2\bin;h:\11istart\Disk1\rapidwiz\bin;C:\cygwin\bin;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
LD_LIBRARY_PATH : d:\oracle\visdb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\visdb\9.2.0\appsutil\log\VIS_maher\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:20
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=maher.home)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:21
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is d:\oracle\visdb\9.2.0\network\admin\VIS_maher\listener.ora
Log messages written to d:\oracle\visdb\9.2.0/network/admin\vis.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=maher.home)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
STATUS of the LISTENER
Alias VIS
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 08-JUL-2007 11:08:21
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File d:\oracle\visdb\9.2.0\network\admin\VIS_maher\listener.ora
Listener Log File d:\oracle\visdb\9.2.0/network/admin\vis.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=maher.home)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "VIS" has 1 instance(s).
Instance "VIS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
Please refer to the remaining logs on middle tier at - d:\oracle\visappl\admin\VIS_maher\log\07080913.log
and this is the last part of (07080913.log) log
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set JAVA_LOC=d:\oracle\visora\iAS\appsoui\jre\1.3.1\bin\java
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set JAVA_CLASSPATH=d:\oracle\visora\iAS\appsoui\oui\lib\OraInstaller.jar;d:\oracle\visora\iAS\appsoui\oui\lib\xmlparserv2.jar;d:\oracle\visora\iAS\appsoui\oui\lib\ewt.jar;F:\Stage11i\startCD\Disk1\rapidwiz\jlib\java
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>d:\oracle\visora\iAS\appsoui\jre\1.3.1\bin\java -Doracle.installer.oui_loc=d:\oracle\visora\iAS\appsoui\oui -mx600M -classpath d:\oracle\visora\iAS\appsoui\oui\lib\OraInstaller.jar;d:\oracle\visora\iAS\appsoui\oui\lib\xmlparserv2.jar;d:\oracle\visora\iAS\appsoui\oui\lib\ewt.jar;F:\Stage11i\startCD\Disk1\rapidwiz\jlib\java oracle.apps.ad.clone.util.OracleHomeCloner -registerOUI -ohPath d:\oracle\visora\iAS -ohName APPSIAS_VIS -oraInstLoc "c:\Program Files\Oracle\Inventory"
Log file located at c:\Program Files\Oracle\Inventory\logs\OracleHomeCloner_07081128.log
and this is the cloner log
Registering local Oracle Home located at d:\oracle\visora\iAS to central oracle inventory
Registering the OUI component....
Checking for d:\oracle\visora\iAS\appsoui\oui
d:\oracle\visora\iAS\appsoui\oui FOUND
Verifying OUI Component Version
OUI Component Version is 2.2.0.19.0
OUI Component Version is greater then 2.2
OUI Component registration needed
Registering OUI Component successful
ORACLE_HOME d:\oracle\visora\iAS was registered successfully.
I noticed later an error says java version is incorrect, I installed java 1.6 before I installed oracle apps is this correct?
regards
MaherI noticed later an error says java version is incorrect,
I installed java 1.6 before I installed oracle apps is this correct?Rapid Install installs the Java 2 Standard Edition 1.4.2 automatically for systems running on Solaris, Linux, or Windows operating systems. So, you do not have to install any JDK/J2SE before starting the installation.
Also, make sure you have a valid entry in the hosts file and you can ping the IP address as well as the hostname. -
Oracle Installation Problem on MacBook Pro with OS X
Im trying to install Oracle database 10g on my MacBook Pro with the latest OS version. At first I was a bit confused on which of the links I should download, so I downloaded the client release 1, it was a 300mb aprox download. When the download was over I couldnt run any of the files on my Mac, maybe its because they only run on Mac OS Server? maybe i got the wrong link?
FORGOT TO READ FIRST... SEEMS LIKE A COMMUN PROBLEM. SORRY
Message was edited by:
user575116AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.
-
Installation Problem in SAPNW7.0 with Oracle on RHEL5.4
Hi Everyone,
I am installing SAP NETWEAVER7.0 SR3 with ORACLE 10.2.0.4 on RHEL5.4 Operating System. I have installed the java
and i have install the ORACLE 10.2.0.4 Successfully. I set the environment variable in vi .bash_profile and i set the kernal parameters with their values in vi /etc/sysctl.conf file then run the command sysctl -p. Later i run the ./sapinst script the cd /NW7.0/
BS_Installation Master_2005/ IM_LINUX_x86_64. It went fine up to the 24th phase. At the 24th phase "start instance" i got the error.
The error message is
" ERROR 2010-10-10 12:03:03.542
CJS-20022 Could not start instance 'DVEBMGS00' of SAP system QAS"
I did try my level best to resolve it. Can any one tell me what could be the issue and how to resolve it.
Thanksstartdb.log
Sun Oct 10 16:45:11 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start QAS database ...
Sun Oct 10 16:45:11 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/QAS/102_64<
ORACLE_SID is >QAS<
Sun Oct 10 16:45:11 IST 2010
check initora
Sun Oct 10 16:45:11 IST 2010
check initora
Sun Oct 10 16:45:11 IST 2010
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 10-OCT-2010 16:45:11
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/sap/QAS/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = quality) (PORT = 1527))) (CONNECT_DATA = (SID = QAS) (GLOBAL_NAME = QAS.WORLD)))
OK (10 msec)
tnsping: V2 connect to QAS
Sun Oct 10 16:45:11 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Sun Oct 10 16:45:11 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Sun Oct 10 16:45:12 IST 2010
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Oct 10 16:45:12 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-09925: Unable to create audit trail file
Linux-x86_64 Error: 13: Permission denied -
R12 installation problem on Fedoa 6 with 64 bit amd processor
I installed the R12 (both db tier and application tier) on a linux machine (64 bit machine with Fedora core 6) I could install with out any errors. I was able to open the html login page and login as sysadmin. But now, if I start any forms application, I get an error FRM-92101 on the browser. When I looked at the applications.log file (in ...inst/apps/sfa_localhost/logs/ora/10.1.3/j2ee/forms/forms_default_group_1)
i see this error.
formsweb: Forms session <1> aborted: runtime process failed during startup with errors /home/applsfa/apps/tech_st/10.1.2/bin/frmweb: error while loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directory
07/08/09 12:24:03.523 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
When I searched I found that libXm.so.2 is there in /usr/lib64 directory, so I went and created a link in /usr/X11R6/lib to this lib in /usr/lib64 directory. Now I get the following error.
formsweb: Forms session <3> aborted: runtime process failed during startup with errors /home/applsfa/apps/tech_st/10.1.2/bin/frmweb: error while loading shared libraries: libXm.so.2: wrong ELF class: ELFCLASS64
07/08/09 14:43:01.984 formsweb: Forms session <3> exception stack trace:
oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
Anyone has any clues ? Please help me.Subsequent to your reply, I found that Openmotif is not available in Fedora, so we thought Oracle linux is best in terms of compatibility. But looks like it is not that easy to install EBS R12 on Oracle Linux also. Anyway, we installed EBS R12 on OEL-5 64 bit. Able to run forms after installing openmotif 21. Applied RUP 2. The patch application is failing to link some executables. (specifically FEMCCE, and all the executables in MSC product, MSCCPP. etc...)
Could you give some insights into this ?
Error messages:
`.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' referenced in section
`.rodata' of
/home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o):
defined in discarded section `.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv'
of /home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o)
`.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' referenced in section
`.rodata' of
/home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o):
defined in discarded section `.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv'
of /home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o)
collect2: ld returned 1 exit status
make: *** [home/orasfa/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE] Error 1
Done with link of fem executable 'FEMCCE' on Wed Aug 15 11:26:06 PDT 2007
Relink of module "FEMCCE" failed.
See error messages above (also recorded in log file) for possible
------------------------------------------------------------------------------------------------------------------------------ -
Xp_logininfo Installation problem
Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry HaritonovHi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov -
8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System
Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY -
Problems deploying Windows 7 x64 computers with more than 8GB RAM
SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
AndersWe have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com -
MSI file installation fails on computers with logged-in restricted users
I'm trying to package Flash Player 8b for silent distribution
via Microsoft SMS. My package works correctly on computers where a
logged in user is either a local Administrator or Power user, but
fails with an error on computers where the logged in user has no
such rights. The SMS package is set to install with administrative
rights. The computers are Windows 2000 SP4 and Windows XP SP2
workstations. I only have the problem with Windows XP SP2, but
those computers are the only ones without priviledged users. I've
confirmed that computers with logged-in administrative users work
properly, like my own Windows XP machine.
The installer I'm using is
"install_flash_player_active_x.msi" and the version is "8,0,24,0".
The digital signature is dated "Friday, March 31, 2006 12:45:10
PM". I am led by other posts to believe that this is the most
current version and that I shouldn't be having these problems with
it.
The error that is reported in the log files is:
1: ISMsiServerStartup Failure, Failed to Initialize script
support, Error = 0x80070006
I'm using a Visual Basic script in my SMS package. It
attempts to run the "uninstall_flash_player.exe" uninstaller to
remove old versions, then tries to run the installer. It uses the
following command line:
install_flash_player_active_x.msi /log
%systemroot%\temp\flash_msi.log /qn allusers=2
reboot=reallysuppress
Originally I did not include the "allusers=2
reboot=reallysuppress", but I was having another error and various
Macrovision and InstallShield support sites suggested that addition
as a fix. That error was "Internal error 2103. 26".
Any ideas? Should this really be so hard to package and
distribute?I did find a solution to this odd problem. It does seem to be
a dcom priveledges issue. I suspect the reason it isn't seen on
pre-sp2 is because Microsoft made some changes to post xp-sp2 to
tighten security. So ISSCript is called via dcom. Installsheilds
default runas is "Interactive User" somewhere between SMS client
running as user with admin rights causes this to break. I found
that if you remove the runas string it will execute in whatever
security context the program that called is running in. Since the
SMS client has full control of the machine it works. I've attached
a script that basically makes an array of dcom appid using wmi,
removes the ones that don't have the column "InstallShield
InstallDriver" in them - store those in a an array then remove the
runas line from each. I actually found this script on the
InstallShield site - I left the credits intact
- however I've already thought of a few ways to
improve on this script.
The other problem is that Flash Player 8 installs the
InstallSheild Driver version 10 on launch - which effectively
restores the runas string. So I found there's a custom action
called "EngineStartup.4F635B62_07BF_4779_B74E_D80C29D508E3" - to
disable this I simply made a transform and removed this row in the
InstallExecuteSequence table. Then it all works
Keep in mind - if your target machines do not have Install
Shield Driver 10 on them you'll need to install that in your script
before installing Flash Player 10. To do this make a transform for
isscript10.msi and remove the Registry601 row - so it does not
create the runas key on install.
Or... You could just do the install as system
- and forget this whole thing ever happened. -
Installation problem with already installed apache, help!
Alright, I have oracle 9i client installed on a windows 2000 machine. I'm admin (it is a laptop that dual boots Solaris and Windows 2000). I also had apache 2 and tomcat with jk2 connector. Normally I run a web app off of this laptop, connecting to a remote db. I'm also using HTML DB on Sun machines.
I figured I'd give XE a spin. Too bad there's no solaris version, makes it harder to figure out if something goes wrong.
So I installed and it found some ports already in use. It did assign new ports. But in the end, it didn't connect to the home page.
I figured I'd stop apache and tomcat. I then uninstalled and reinstalled. No port conflict this time, but in the end, it didn't connect to the home page.
If I look at services, 3 XE are running, plus MTSrecovery and OraHome92ClientCache. OracleJobSchedulerXE is disabled. I enabled and started too just in case, but it made no difference.
If I run SQL command line, I can connect as sysdba and all that, so the database is up. Just not the web service. I get a connection refused.
I made sure I didn't have a putty tunnel or anything similar active. If I restart tomcat, it has no problem serving on 8080.
Any suggestions as to where to go next?
FrancoisWell, two things that can happen and happened to me:
1 - ran out of disk space. One tablespace missing. I dont remember the exact error thru oracle, but the install didn't give me any at all. That was the original issue. For those that are getting that ftp screen, there is a good chance it is because you ran out of disk space.
2 - database went in recovery mode (what caused that I'm not sure) the second time around, altough I had 2GB free on C:\. I ended up freeing another 500mb and stopping antivirus, update, sync, apache, tomcat etc Uninstalled one more time and that time the install went through. I might end up reenabling stuff one at a time and do many uninstall/reinstall to try to identify what is the problem. This is a Pentium M 1.6GHz, so I doubt the issue was about CPU cycles.
In both cases, no error messages at install time.
Unfortunately I didn't keep the logs, but as far as a hint, let me mention this:
in c:\oraclexe\app\oracle\admin\XE\bdump\
there is an alert_xe.log file which can reveal a lot of interesting things.
Also, check how much free space you have left after install.
Francois -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Home sharing problem: I have never set up home sharing but I feel I the concept and how it works. I recently (last 2 months or so) deauthorized, first time ever, all computers with my iTunes account. I have 3 computers authorized. I am trying to set up home sharing but get iTunes says:
"Home Sharing could not be activated because this computer is not authorized for the Apple Id "#########@###.com". Would you like to authorize now?" I click "authorize" and get the next error " You cannont authorize more than 5 computers. You have already authorized 5 computers with this Apple ID. To authorize this computer you must first deauthorize one of the other computers."
Can someone help or shed more light on my problem?
Thanks,
RichardHome Sharing is designed to work on your local network not across the internet/cloud.
Stuff is accessed under the Computers column where your local iTunes library on a local computer would appear.
Home Sharing would share your iTunes content (i.e. stuff stored in itunes on the computer, not in the cloud) with AppleTV or an iPad etc on the SAME network.
AppleTV2 will not be able to see itunes content on the work computer over the internet. It's not designed to. if the work computer was on the home network it would.
iCloud is in it's infancy and is not a mature product - iTunes TV Show purchases appear on AppleTV, but currently music does not unless you are subscribed to iTunes Match. I find this rather odd to be honest, along with the inability to buy music on AppleTV2. Movies purchased in iTunes are not authorised for iCloud viewing currently either.
Maybe it has something to do with iTunes Match 'getting in the way' - i think they assume you'll use that whereas you really want to be able to access Purchased music from the cloud without subscribing to itunes Match which is overkill for some.
AC
Maybe you are looking for
-
I have a xml publisher report which list job names. After submitting concurrent program, I am getting below error A semi colon character was expected. Error processing resource some of the Jobs have special character '&'. below is code CREATE OR REPL
-
Obtain Ip address of hand held terminal
Hi all.. We are writing an application for hand held terminals. We are using PDT6846. The HHT application runs on a solaris machine from where the requests are routed to the server. Individual users connect to the HHT application through telnet. Ther
-
How to hide status bar and get fullscreen?
Hello, I have compiled to .ipa and loaded my app onto my iphone. I have set the app to be fullscreen in the descriptor file, but it does not display fullscreen on my phone. Initially the UIStatusBar gets hidden like it should, but after the Default
-
Weblogic 10.3.6 SSL configuration with Crt files
I have 3 files; AddTrustExternalCARoot.crt TrustedSecureCertificateAuthority_3.crt www_abcd_com.crt Weblogic asks me Custom Identity Keystore and Custom Trust Keystore jks files. How can i configure a weblogic 10.3.6 server instance with this keys?
-
Aloha, when I 1)Load in new photos from my camera and 2) view any photo in my library in my viewer at any time, it is out of focus. I have to slide the slider even just a little bit and it brings the pic into focus. When I am looking at a new roll pi