Installation problem - Oracle 11gR2 Windows XP Professional SP 2

Hello everybody!
I have a problem at the installation moment of Oracle 11g R2 on Windows XP Professional Edition with SP 2. Please help me!
This is my computer's hardware configuration:
CPU Intel Pentium 4 3.00 Ghz x86
RAM: 1 GB
Hard disk: SATA 180 GB
Graphic Card: PCI-Express nVidia 7300GS 256 MB
Network connection: LAN / Internet connection: ADSL
O.S. Windows XP Professional Edition SP 2 (and installed .Net framework 2.0)
Antivirus: AVG 9.0 free edition
WEB Browser: Internet Explorer / Mozilla Firefox.
I tried to Install Oracle 11g R2 2 times, so I have formatted my computer 2 times because after the installation process, the Oracle Universal Installer don't respond.
Every time I installed the O.S., drivers, Antivirus, .Net Framework, Ms office, everything works properly.
I configured the network connection to use a fixed IP Address, I created the environment variables ORACLE_BASE, ORACLE_HOME, ORACLE_SID and ORACLE_UNQNAME (1st time its value was the same value of ORACLE_SID, 2nd time its value was the database global name) and then, I start the SETUP program, it run properly, but at the moment of finish the database creation this message appears: execute the commands: 1) define ORACLE_UNQNAME in database unique name 2) emctl.bat start dbconsole.
Through SQL Plus I can connect to the database, execute queries, the listener is working, but the database console service doesn't work. If I try to start it since command prompt (emctl start dbconsole) I get a message about the specific error 2.
What can I do??
Thanks in advance!

Good morning! I hope you are fine.
I appreciate your help.
Jean-Valentin: I opened a DOS box (logged as the Administrator User who installed Oracle), I changed the ORACLE_SID value and the result of the commands:
set ORACLE_SID=MGN
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
was this one:
C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl stop dbconsole
OC4J Configuration issue. C:\Oracle_base\Home_ODB11gR2_Aug1st2010/oc4j/j2ee/OC4J_DBConsole_oraserver11_MGN not found.
Definitively, change the value of ORACLE_SID is not right. Then, I changed the ORACLE_SID again to its original value and the result was:
C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl stop dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The OracleDBConsoleMGN service is not started.
More help is available by typing NET HELPMSG 3521.
C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleMGN service is starting...............
The OracleDBConsoleMGN service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Using the ORACLE_SID original name, at least the emctl shows the OracleDBConsoleMGN as not started when I try to stop.
schavali: When I executed the Oracle Installation, the database configuration assistant showed this message:
The Enterprise Manager configuration was success with this warning: Error at start up database control, execute the commands: and you know, here start our history.
And the 3 steps of the database configuration assistant shows this:
Copying database files : Success (correct mark)
Creating and starting up database instance: Success (correct mark)
Finishing database creation: Success (correct mark)
I'll try to check the information of the link: http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/structure.htm#CACBBFGI
and then, I write again.
This cannot be... Oracle always works properly... is powerful... what is going on???
Thanks guys, have a great day!

Similar Messages

Installation of Oracle 11gR2 in suse 12.1

Hi,
I recently installed the the linux Open suse 12.1, I have only one os in my pc. Now i want to install Oracle, can any one help me how to install and what are the packages to install before installation of oracle and where can i get those package.
One more point is I am newly to the linux, I dont know anything about this linux, Just 2 days before i installed the os. Can any one help me for this query
Thanks and regards,
G.Manikanta

How many PC's and OS's do you have ;-) Installation of oracle 11gR2 in fedora 16
Supported OS versions are listed in the Install Doc - http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
If you insist on using an unsupported OS, you are on your own.
HTH
Srini

EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- Neil

Hi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28080
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28443 (SSL)
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>-----

Problems after installing Windows 7 Professional on Thinkpad T61

I have an old T61 that had Windows Vista installed. I wanted to use Windows 7 but didn't want to wipe out what I already had (for various reasons). So I bought a new disk drive and did a clean install of Windows 7 Professional. The disk drive is a Western Digital Blue Notebook 1TB drive. After installing the drive in the machine, I followed these instructions to install Windows 7: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74108. I chose to partition the drive into a C: drive (500GB) and a D: drive (431GB). After the install completed, I downloaded all the available Microsoft fixes (this took some time to complete).
For the Device Driver and Application install, I used the ThinkVantage System Update option. The site indicated that Microsoft .NET Framework 3.5 with Service Pack 1 or later was required. I downloaded and installed version 4. There were additional Microsoft fixes for version 4, which I downloaded and installed also. Then I downloaded and installed ThinkVantage System Update 5.03. I then executed System Update and selected all the available updates. They all installed, except for Windows 7 Update Module KB2615763 64bit. This update, after failing, gave the option to install manually but when I click on that option I receive a pop up saying: Installer encountered an error: 0xc8000247. The title of the pop up says Windows Update Standalone Installer.
I then attempted to install various applications on the machine: FileZilla FTP Client, Google Chrome, Notepad++, PrimoPDF were all installed without problems. When I installed a Cisco VPN Client for 64 bit machines, however, I was knocked off the network. Clicking on the WiFi symbol in the task bar showed that I had only limited connectivity to the network. I tried to do a IPCONFIG /ALL and neither the WiFi adapter nor the Ethernet LAN adapter showed up in the list. I uninstalled the VPN Client, from the Control Panel, and was immediately able to connect to the network. An IPCONFIG /ALL now showed all the network adapters. I installed/uninstalled the VPN Client several times just to make sure that it was causing the problem of no network connectivity.
I fgured that there might be updated network adapter drivers available to resolve the problem so I attempted both System Update and Windows Update again. System Update showed nothing available, except Windows 7 Update Module KB2615763 64bit. Windows Update had a message saying "Check for updates for your computer" but when I clicked on "Check for updates" it popped up a message saying "Windows Update cannot check for updates because the service is not running. You may need to restart your machine." I checked and the Windows Update service is running. I stopped and restarted it but received the same message when I tried to check for updates again. I rebooted the machine and tried Windows Update again. Same pop up message.
I tried the "Fix problems with Windows Update" option in the Control Panel but received a message saying - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting. The error details say:
Package ID: WindowsUpdateDiagnostic
Path: Unknown
Error Code: 0x8E5E0247
Source: Engine
I tried some of the other troubleshooting options and they all give similar errors - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting.
I then thought it might be a disk drive problem so I tried to do a CHKDSK /F but when the machine reboots the CHKDSK seems to start (there is a message that says it can be interrupted by pressing a key within 10 seconds) then, before the 10 seconds are up, it ends without checking the disk and the machine continues to boot up.
Has anyone seen any of these problems before? Did I miss something? Could this be related to the disk drive? Or missing device drivers? Bios?
Any help with this will be appreciated.
Solved!
Go to Solution.

A laptop drive that size is almost certainly an AF drive. You can check by looking up the model's specs on the vendor's site. You can also use the fsutil command to check the drive's physical sector size and verify that the size isn't getting reported correctly - which is what usually causes the update problem.
http://support.microsoft.com/kb/982018
Expand the "Issue 6 Fsutil.exe tool" entry in that link for more info. The entire KB may also be helpful.
If my guess is actually the problem you won't have to reinstall Windows 7. Just update - or roll back - the driver. You might first try going to Device Manager, selecting the storage controller, and rolling back to an earlier driver.
If that works, configure ThinkVantage System Update to not show the offending driver, or this will happen again. If that doesn't do the job, go to Intel's site and find the latest Matrix Storage Manager or Rapid Storage Technology that is specified for your chipset and operating system. Or just try the latest and if that doesn't work, try earlier ones.
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Software+Products&ProductL...
Here's a local KB addressing this (presumed) issue: http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Windows-Update-Fails-After-Installing-New-Hard-...
To repeat, this is a bit of a guess. It's pretty likely that your storage driver is the culprit. Either you need one new enough to support the physical size reporting ioctl, or you've been bitten by TVSU "updating" to a buggy driver. Either way the corrrect driver should fix things.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Installation of Oracle11i on Windows 2000 Professional,Pentium 4

Hi
My system is Pentium4,128MB RAM with Windows 2000 professional OS.i am stuck at the first cd i.e i could not run RapidWiz.cmd.it is coming to the command prompt just leaving
"start .bin\launch.exe .RapidWiz.cl" on the screen with in no time.
does any one have work around for this problem.
Please help me in this regard.
please do mail me to [email protected]
Thanks in advance.
Sreeni.

Hi,
Sorry, this is an old entry aka a bug in the docu. Windows 2000 is not supported possible anymore by CE, (its not tested anymore). Most likely Windows XP without passowrd account also does not work anymore.
Best Regads, Oliver
Composition Environment, CE1, Windows 2000 Windows XP.

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

How to find the Date and time of Installation of Oracle in Windows?

Hi ,
Is there any way to find the installation Date and time of Oracle in Windows?
Regards
Rajesh

If you have never recreated/restored/reincarnated the database, then CREATED column from v$database should tell you when you created the database.
If you are looking for the date/time of installation of Oracle home, check the logs under OraInventory.
Reply by Satish sir at following link:
installation date/time of a database !!
Hth
Girish Sharma

Installation of Oracle 11gR2 hangs at 60% on OL 5.5

I am installing Oracle 11gR2 SEOne on an OL 5.5 platform. The install hangs at 60% with no errors, at the following step:
Copying files for 'Oracle Notification Service 11.2.0.0.0'
This is a fairly minimal Oracle Linux installation, but I have run the following and rebooted:
# yum update
# yum install oracle-validated
# yum install kernel
# yum install oracle-linux
I've also done my best to follow guidance from the Quick Install Guide for this platform (Linux x86_64).

It figures. After hanging for about 2 hours, I posted a question -- and suddenly the installation has started showing progress again. I guess that was just a long, slow step.
Thanks to all those Oracle dudes who answered my previous question, and got me to this stage!

Installation of Oracle for Windows 98

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I tried to install on Windows Me and I have problem. Installing Databes Assistent manager failed.
Can I install this oracle to windows me

run the enterprise manager configuration assistant.
peter

Installation Problem on a Windows 7 x64 machine

After downloading the two files from otn for 12c successfully, I started the install. It got to 59% complete and then just hung. Prior to that I got a few error messages about files missing. It appeared that it was trying to update a key when it hung. No error message was produced, but I cancelled it after a few hours. I had previously installed 11i on this laptop, but thought I erased everything about that install. Any ideas? Thanks in advanced. Bob

Pl identify the version on Win 7 - you will need Professional or higher - Oracle Database Preinstallation Tasks
Pl confirm that you unzipped both zip files into one single folder. Pl also confirm that you executed setup.exe by right-clicking and selecting "Run As Administrator".
If you chose to install the software AND create a database, some folks have reported issues with this. Try installing the software only first, then using DBCA to create a database - Installing Oracle Database and Creating a Database
Pl check the install log file for errors and post them here - Troubleshooting the Oracle Database Installation

Installer problem - Oracle 11g on Redhat ES 5.1 (x86)

Hi,
I'm trying to run the "runInstaller" script to install Oracle 11g onto my Redhat ES 5.1 (x86) machine and the following error is being reported:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 1409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1407 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-01-10_04-46-50AM. Please wait ...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I copied all the installation tree to /tmp/oracle and ran chmod -R 777 * to make sure I could see all the files.
I've been logging onto the server as the oracle user.
I've also got Java v1.5.0.6 installed
I've run out of ideas - anyone able to assist ?

I've sorted it. Was originally copy unzipped install files from DVD into /tmp but think there must have been some corruption. I now copied and unzipped the install file onto the RH machine and it's now working.

Installation Problem Oracle 9.2.0.4 on Red Hat Linux 5

I have installed Red Hat Enterprise Linux 5. I want to install Oracle 9i (9.2.0.4) Server.
I have created oracle user and set oracle home directory in the .bash_profile.After that i run runinstaller file but the message comes as below..
'The user is root. Oracle Universal Installer cannot continue installation if the user is root. No such file or directory.
Please tell me the actual solution.
- Prasanta

First of all, as pointed out by Hans, make sure you perform the installation with the oracle user, not root.
Next, you should be aware that installing Ora9iR2 on RHEL5 is neither supported nor planned, so you must be aware you will be on your own. There is no official procedure to install 9i on RHEL5, however, considering you will use this for personal purposes, not production, you can attempt the procedure provided by Ivan Kartik --> Oracle 9i on RHEL 5.
~ Madrid
http://hrivera99.blogspot.com

Installation problem Oracle 9i on SuSE Linux 7.2 s390

Hi all
I've got a problem after having installed Oracle9i on a S390 box with SuSE linux 7.2. When I launch sqlplus, I've got the following message :
sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot load shared object file: No such file or directory
It appears the shared library libclntsh.so.9.0 was not included in the tarball I've downloaded from the Oracle site.
Any idea ?
Thanks
Frangois Basquin

Forget my question : I've found the answer in the document ID 158104.1. Even if my problem was not exactly the one mentioned (I hadn't any problem during compile time), the cure was good.
Frangois

M515 Hotsync problem with computer Windows XP Professional

I am not a computer person. Since my friend connected our WD My Book Essential external hard drive to our computer my husband's M515 does not hotsync . Message he gets is "The connection between your handheld computer and the desktop could not be established. Please check your setup and try again." We have checked everything in the Palm Desktop Hotsync and the handheld Palm and everything looks the same. I have downloaded the Palm Desktop 4.1.4 sotfware, tried the soft reset several times and nothing works. When I Hotsync it restarts the computer and always comes up with the above message. This problem happened a few years ago when PalmOne was operating and the Support Team fixed the problem. Can someone help my husband before he kills me and the external WD My Book Essential.....
Post relates to: Palm m515

I was not able to Hot Sync my old Tungsten T (m550) with Palm Desktop 4.1.4 and HotSync Manager (Windows).
I am using Windows 7, 32bit OS. I unistalled Palm Desktop 4.1.4 and HotSync Manager (Windows),
then downloaded Palm Desktop 6.2 and HotSync Manager (Windows) and everything works just fine now.
Here is the link for that version:
http://kb.hpwebos.com/wps/portal/kb/common/article/32859_en.html
I was then able to load my HanDBase 4 application without any issue.
Can't hurt to give it a try.
Kevin

Installation Problems Oracle Portal3.0 Linux 8.1.6

The installation finshed with Errors:
SSO Hast
WWSEC_Enabler_Config_Info
Now I can start the welcome Page of Portal.
But if i try to logon, i get the following error message:
You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)
null

Did you try some of these solutions?: http://otn.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm#_Logging_in_to

Installation problem - Oracle 11gR2 Windows XP Professional SP 2

Similar Messages

Maybe you are looking for