Installation problem with free trail version of Illustrator CS3.

I try to install the free trail version of Illustrator CS3.
I have this error message: A problem was encountered while tryng to load trial period for adobe Illustrator CS3.
I reinstall the software and have the same problem.
I uninstall the software and have the same problem.
can you help me ?

You probably need to contact Customer Support.

Similar Messages

  • I've run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one.

    I’ve run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one. Here’s what happened.  Yesterday when I turned on the computer, I got a prompt asking if I wanted to link my Adobe Lightroom with Adobe Premier.  I “x’d” the prompt but then the computer went into a “do not turn off” mode.  45 minutes later the computer was still prompting me not to turn it off. Thinking that the computer was hung up I did turn it off.  Then I turned it back on, went to Adobe Lightroom to discover that all my work from the past three-to four years had disappeared. 
    At this point I am afraid to mess with Adobe Premier, so it’s still on my computer.  I used Windows 7, Photoshop CS3 and Lightroom 4.  Do you think if I uninstalled my trial version of Adobe Premier 13, my work on Lightroom would return?  Or is it lost?
    Thanks to any who offer suggestions. 
    Bert Gildart

    Bert Gildart
    I was unaware that you could establish any direct linkage between Lightroom and Premiere Elements. Are you sure that the association was to be for  Photoshop CS3 and Lightroom?
    Have you tried to do a System Restore to a point before you installed Premiere Elements 13 or before you OK'd whatever this Lightroom linkage was?
    Have you asked your question in the Adobe Lightroom Forum, asking about recovery of work lost from Lightroom? Have you found any traces of your lost Lightroom work in the Recycle Bin?
    ATR

  • Problem with custom print dialog in Illustrator cs3 on OS X

    Hello Illustrator Support Forum,
    I am an IT systems administrator and I have a user that has a problem when printing from Illustrator to our Ricoh photocopier.  The problem is that Illustrator uses its own custom print dialog and not the default mac os x system one.  This prevents the print job from going through because it does not send the required user code along with the print job.
    A work around we found was to print to Adobe Distiller creating a pdf then printing from there but this definately not ideal.
    Any ideas?
    Thank you,
    - Vince

    Hi Larry,
    Thanks for the tip.  This makes it a bit easier of a work-around but its still not a fix for the initial problem of printing directly through Illustrator.

  • Installation Problems With Photoshop CS3

    I had to reinstall Photoshop CS3 on my current MacBook Pro running OS X 10.5.6.
    When trying to re-install using the original full version disk I received the following error:
    JavaScript Alert Critical errors were found in setup -The installer database is invalid: please re-install the product from the original media. Please see the Setup log file for details.
    I even even tried to down load and install the Trail Version of CS4 to see if that could be done. Same error happens.
    Any idea what has happened?
    Would appreciate any suggestions.
    Thanks

    Ramon,
    Thanks for the input. However I tried that already with the same results.
    Have no problem with Lightroom 2.2 just Photoshop CS3.
    Sent Adobe a message with this problem via their support section, however they just closed the case and more or less stated my time has expired. So now I am at a stand still with CS3.
    My next option is just do a complete re-install of Leopard as I do have everything backed up via Time Machine.
    In the mean time I found a program called Pixelmator that works just fine until I am able find a solution for this problem.

  • Problem with loading trial version

    Anybody knows what's wrong with this? - after I properly
    installed the trail version of Contribute CS3 and came to the
    screen of software setup (where you choose "I want to try ACC free
    for 30 days), I clicked "Next" and it says: "a problem was
    encountered while trying to load the trail period for adobe
    contribute cs3..
    I've tried to reinstall it couple of times, but never worked.
    I am desperately wanting to know how to fix he problem, any
    advice would be greatly appreciated!
    UWS

    Having the same issue...with all the CS3 products.
    Just got off the phone with support on it and they have no
    clue about the problem or the fix. They recommended reinstalling
    windows (man...if I had a $ for each time I've heard that crap).
    So...no trial review=no license purchased.
    Thanks for nothing

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • Is Anyone Having Problems with the newer version of Firefox?

    I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
    So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

  • I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

    I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

    Nobody can help you with at least some system information....
    Mylenium

  • SAP Business Objects Data Services (free) Trail version!

    Hello guys,
    I am trying to learn SAP Business Objects Data Services.
    After a long search, i couldn't find any (free) trail versions in sap website.
    Are there any free trail versions available for Data Services!!, if so please post the link!!
    Your help would be appreciated!
    Thanks,
    Dhee

    hmmm... maybe 'recently' was back in Summer 2010 ? 
    if you are a small to medium enterprise, and are looking to buy,  take a look at our offerings over here: http://www54.sap.com/solutions/sme/software/overview.html
    Else, if you are an existing customer, with an active support/maintenance agreement and license, please download your software from the marketplace here: www.service.sap.com/swdc
    Regards,
    H

  • What is the problem with the newest version of iTunes (Failed to install - error 7

    What is the problem with the newest version of iTunes (Failed to install - error 7 & missing MSVCR80.dll) - the DLL is not missing.  tgried to install today and it failed - what a waste.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall go to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Problems with Itunes New Version?

    Problems with Itunes New Version?
    Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
    <edited by host>
    Thanks,
    <edited by host>
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 1
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0

    There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

    Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

    Sounds like this issue:
    * http://kb.mozillazine.org/Preferences_not_saved
    * [[Preferences are not saved]]

  • License not present. With the trail version only limited replays are allowed... Qtp automation

    Hi All.
             We are doing QTP automation testing for our flex application. But after running all 30 tests it is showing License not present. with the trail version only limited replays are allowed. We are using  flex sdk 3.5 and flash builder 4 plugin for eclipse. we are building our application using ant and we are deploying the application directly and testing it.  Can any one tell Steps to resolve this issue...
              please step by step required..
    Thanks
    Ram

    You need to have valid premium license for Adobe. Only then it would work.

  • HT4623 How can i solve installation problem with iOS 6.

    How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

    can you connect your device to Tiunes and check to see if there are any files in
    OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
    Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
    specifically named OTA......
      Also for the failed itunes restore please attach the contents of the latest log in
    OSX:   ~/Library/Logs/<iphone or ipod or ipad> updater logs
    Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

Maybe you are looking for

  • Quantity/value updation query

    hi all PR-RFQ/Quotation-Price comparison-PO-GR-IR, when I am doing this process I want only update quantity only, I don’t want to update value updation Pls tell how it is possible is there any configuration required in this scenario Pls tell me as ea

  • Can not start WLS as oracle user

    I am not able to start the WLS (10.3.2) as the oracle user. I am able to start it as the root user but i don't have root access so i always have to ask our admin to stop and start the server... What do i need to do to be able to start and stop the WL

  • Subquery Factoring and Materialized Hint

    WITH t AS         (SELECT MAX (lDATE) tidate            FROM rate_Master           WHERE     Code = 'G'                 AND orno > 0                 AND TYPE = 'L'                 AND lDATE <= ':entereddate') SELECT DECODE (:p1,  'B', RateB,  'S', Ra

  • PARTNER_UPDATE modify custom field

    Hi all, I need to do some modifications in partner data, the problem is that the badi PARTNER_UPDATE is only triggered if a standard field is changed.  The same happens with others badis like BUPA_ADDR_UPDATE. I've added a custom field and I want to

  • Directly visible file - what to do?

    Hi, I have just signed up for an annual subscription of PDF Pack in the hope that I could obtain one thing: I want to e-mail a pdf file in a way so that the file opens up directly when the mail is opened. Previously - at least two years ago - this wa