Installation problem with oracle 11i e-business suite
Hai iam installing 11 i financials for the first time on windows server -2003
i have completed the first stages of validation system configuration .
and later while extracting files from the location it shows error as
1.APPS_ORACLE_HOME environmental file was not created? please tell me how this will be done in detail>
2.Apps configuration was not created?
3.RW-00023 -ERROR-DBC File was not created?
please give the replies in detail
thanks
.
Thanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users.
Similar Messages
-
Oracle 11i E-Business Suite Installation on Windows fails
All you Oracle 11i gurus out there, please HELP as I am at my wit's end.
I am trying to install Oracle 11i E-Business Suite (downloaded from the edelivery Website) on Windows 2003 Server with dual PIII CPU, 1GB RAM, and 150GB+ disk space.
My Oracle 11i install on Windows has been failing during Step 1 of 5 following the process of unpacking the 114 zipfiles for the 9.2.0 database even though all the diagnostic steps passed.
It appears the install is failing on the following step:
InstantiateFile -d d:\oracle\visdb\9.2.0\appsutil\driver\instconf.drv
I have MKS Toolkit installed on C:\MKS and VC++ installed on C:\MVS\VC98.
I have renamed make.exe to gnumake.exe in the C:\MKS\mksnt folder and copied the linker (link.exe) from C:\MVS\VC98\bin to the C:\Windows\System32 folder.
The InstantiateFile step is executing some Java classes. I have also installed the JRE on C:\jre1.5.0_06, although it's doubtful this will impact the install scripts since the scripts are all hardcoded with the included JRE 1.4.2.
Why do Oracle DBAs and users deal with this crap? A software install should not be this difficult.
Thanks in advance.Thanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users. -
Need case study of Multi-org in Oracle 11i E-Business Suite.
Hi
Could you please share the case study for muliti-org in oracle 11i E-business suite.
Thanks in advance.
Thanks and Regards
Bharati AkkivalliCould you please share the case study for muliti-org in oracle 11i E-business suite. Please see these links.
http://bit.ly/UAegf7
https://forums.oracle.com/forums/search.jspa?threadID=&q=MultiOrg&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
How to Install Oracle 11i/E-Business Suite in Windows using cygwin
Hi,
if
You are going to use oracle EBS for learning oracle provide the free of license
you must install Oracle Apps with Vision Database
its absolutely free for learners
for further details read this blog
http://gpganapathy.blogspot.com
Find article related with Oracle 11i installation in windows XP
All rights reserved by only oracle corporation if you have any doubts related to license issues Contact oracle Corporation DirectlyHi;
Please check Hussein Sawwan greatest previous post about same topic
Oracle EBS 11.5.10.2 Installation Steps
Oracle EBS 11.5.10.2 Installation Steps
Regard
Helios -
Interfacing to oracle 11i e-business suite from external applications
I would like to send and receive data interactively from an external application to Oracle e-business suite 11i. Can you please point to me the API's or any other starting points. (Comparable to SAP's ALE..via BAPI's, IDOC's etc.)
AbeezarThanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users. -
Successfully Intalled Oracle 11i E-Business Suite in windows platform !
Dear All
After struggling almost 15 days (documents searching from google, metalink etc...), successfully intalled more than 6 times in Window 2000, windows 2003, and Windows XP .
Anyone wants to know the steps contact me directly, i will advice you accordingly.
Staging, intalling software step by step and path setting, error code, gnumake failure, domain etc....
Regards,
Willynelly.Hi Willynelly
I an trying to install the Oracle 11.5.10.2. I am using Cygwin instead of MKS. But getting some post installation problems. The log is as follows.
DBC File Check gave following successful message:
DBC file passes instantiated variables test:
File = E:\oracle\visappl\fnd\11.5.0\secure\VIS_01hw071632\vis.dbc
But JSP Check gave following:
checking URL =
http://01hw071632.myolm:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_01hw071632\vis.dbc
DBC file may be invalid
Database Availability Check gave "requires review" with following message:
command : cmd.exe /c E:\OracleState11i\Stage11i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd
E:\oracle\visdb\9.2.0\VIS_01hw071632.cmd sqlplus E:\OracleState11i\Stage11i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
E:\OracleState11i\Stage11i\startCD\Disk1\rapidwiz>echo off
Fri 08/25/2006
12:26 PM
ECHO is off.
ECHO is off.
Fri 08/25/2006 12:26 PM
VIS_01hw071632.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : E:\oracle\visdb\9.2.0"
" ORACLE_SID : "
" TWO_TASK : "
" PATH :
E:\oracle\visdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;E:\oracle\visdb\9.2.0\bin;E:\oracle\visdb\9.2.0\jre\1.4.2\bin;E:\o
racle\visdb\9.2.0\jre\1.4.2\bin;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;E:\PgFiles\VS6\Tools\Win
NT;E:\PgFiles\VS6\MSDev98\Bin;E:\PgFiles\VS6\Tools;E:\PgFiles\VC98\bin;E:\cygwin\bin"
" LD_LIBRARY_PATH : E:\oracle\visdb\9.2.0\lib"
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Aug 25 12:26:01 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12537: TNS:connection closed
connect test returning code 3
ERRORCODE = 3 ERRORCODE_END
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command : cmd.exe /c
E:\OracleState11i\Stage11i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\visora\8.0.6\VIS_01hw071632.cmd plus80
E:\OracleState11i\Stage11i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
E:\OracleState11i\Stage11i\startCD\Disk1\rapidwiz>echo off
Fri 08/25/2006
12:26 PM
"The environment settings are as follows ..."
" ORACLE_HOME : E:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH :
E:\oracle\visora\8.0.6\bin;E:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\W
INDOWS\System32\Wbem;E:\PgFiles\VS6\Tools\WinNT;E:\PgFiles\VS6\MSDev98\Bin;E:\PgFiles\VS6\Tools;E:\PgFiles\VC98\bin;E:\cygwin
\bin"
" LD_LIBRARY_PATH : E:\oracle\visora\8.0.6\lib"
SQL*Plus: Release 8.0.6.0.0 - Production on Fri Aug 25 12:26:02 2006
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-12547: TNS:lost contact
connect test returning code 3
ERRORCODE = 3 ERRORCODE_END
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 3
I also sent you a friend request from yahoo to ask your advice.
Your help is of much appriciation.
Thanks
Manish -
Installation problem with Oracle 8.1.7 on Mandrake 8.1
Hi all,
I am trying to install Oracle 8.1.7 (Rel 3) on Mandrake Linux 8.1. I changed all the parameters, tested everything, created the users (oracle & apache) and groups (oinstall & dba) as per the documentation. I downloaded the Oracle's "tar" file from the Oracle's web site. I unzipped that in "/shared" directory on my PC. I changed to "/shared/Disk1" directory and gave "./runInstaller". A window is opening with the following buttons.
About
Deinstall products
Exit
Help
Installed products
Previous (disabled)
Next
Only "About" and "Deinstall products" buttons are working. None of the other buttons are working. When I press "Next" nothing is happening.
Could anybody help with this problem. I really appreciate it.
Thank you very much in advance,
Murali.Hi all,
This problem got solved. Its very silly thing. Number lock should be off, when you are running Oracle Installer. It worked for me. (This is for Mandrake Linux 8.1)
Regards,
Murali. -
Installation Problems with Oracle 8i and Win98
Yesterday I tried installing Oracle 8i Personal Edition from CD. I completed installation up to "Database Creation in Progress", initializing phase. It stuck at 85%. The CD did not make any noise, and it stayed at 85% for 53 minutes.
Today, I downloaded Oracle 8i. It unzipped with no problem. I uninstalled, then tried to install. I got numerous .dll file errors in writing to file c.
The CPU is 500mz, 128 S-DRAM PC-133 Memory, there is 32 gig free on hard drive, Browser is IE Ver.5.5, O/S is Win 98.
Thank you
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename - psoracle81798
- Date/Time 02/08/02 10:05 am EST
- Browser + Version - I.E. Ver 5.5
- O/S + Version WIN98
- Error Msg: Error in writing to file CChange Compiler to egcs 1.1.2-24.
Try again. -
Installation problems with oracle 9iAS v1.0.2.2.2a
Dear all, i had been having a problem to install oracle 9iAS v1.0.2.2.2a on Windows 2000 Service Pack 2 edition for the past 5 days.
I had read through the installation guide and follow steps by steps instructions. but the installer would just stop at 100% "Copying welcome.html or Copying demo.gif". It only leave with a step that it would reach the configuration setup. I am wondering anyone encounter this problem.
I had tried to install on notebook and desktop with the same platform. On the notebook, i have oracle 9i database release 2 installed on it. Thinking it might be a compatibility problem, i tried installing oracle 9iAS on a desktop with a oracle 9i database client. But i would want the application server and database to run on the same machine. Should I wait for the oracle 9iAS release 2 for NT or anyone have any advise on my problem.
i would appreicate if anyone can help. thank you.Maybe this is a bit of a simple question. But, do you remember how long you waited, when the progress bar indicated 100%? The installation progress status does indicate "100%" for a while, doing some "last minute" stuff, before moving on to the "Configuration Tools" phase.
Yes, as Ashesh stated, Oracle9iAS 10222a and Oracle9i Database can co-exist on the same machine, as long as they are in separate ORACLE_HOMEs. And, yes, the structure you described (\oracle\database and \oracle\iASHome) does qualify as "separate ORACLE_HOMEs".
Cheers! -
Installation problems with Oracle 8.1.7
I have tried to install oracle 8.1.7 on my computer (NT), but Oracle Installer didn't start.
Java = jdk 1.4.0, Proc. Pentium 4
Is there any other way to install oracle 8i without java installer.
Regards
RobertHello,
Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site.
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on the Oracle Database Server, Oracle9i Application Server Containers for J2EE (OC4J), Oracle9i JDeveloper, Reports, Forums, SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/start/otnServiceNetwork/intro.html?src=912386&Act=6
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Regards,
OTN -
Installation problemes with oracle 9.2 on SLES9
Hey,
i want to install Oracle 9.2 on SLES9, but shall i start the runInstaller in the shell?
'Cause whenever i want to start it in the shell, i get an error:
Initializing Java Virtual MAchine from /tmp/OraInstall2005-09-19_01-43-28PM/jre/bin/java. Please wait...
Error occurred during initialization of VM
Unable to load native libary: /tmp/OraInstall2005-09-19_01-43-28PM/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Can someone help me?
Thanx DanielHi.
Looks like you are missing some packages.
Have you installed the following packages:
* glibc-2.3.3
* gcc-3.3.3
* gcc-c++-3.3.3
* libaio-0.3.98
* libaio-devel-0.3.98
* make-3.80
* openmotif-libs-2.2.2-519.1
* orarun-1.8-109
I was not able to find this information in the 9i R2 installation guide, however, the release notes for 9.2.0.4 gives a more detailed description on the pre-installation tasks.
This document could be found on technet under the following link:
http://download-uk.oracle.com/docs/html/B13670_06/toc.htm
Good luck
rgds
Kjell -
Installation problem with oracle 10g release 1 in RHEL ES 4 platform
Hi,
I am facing such a problem. I want to install Oracle 10g release 1.
I am using linux 86_64
os is RHEL ES 4 UPGRADE 5 X_86_64
When i put the command ./runInstaller It shows os is not supported.
Is there any way to install this oracle version.
Can u please suggest which version os is suitable for this.
please suggest.
Thanks & regardsWHICH 10gR1 software do you use? Oracle provides different versions, you need 10.1.0.3 for Linux x86-64 from the OTN download page.
By the way I would install 10gR2.
Werner -
Problem with NWMKDE in Small Business Suite 6.0
Hello. I was installed NSBS 6 on Intel server, then I was installed
Support Pack 4 for NW 6.0. Now I have PSVW.LOG full of communicates:
12-08-2006 16:27:11 NWMKDE 00000081 NWMKDE.NLM HAP I System Error:
112.5.0 File: SYS:SYSTEM/PRODAUD3.DB
12-08-2006 16:27:11 NWMKDE 00000081 NWMKDE.NLM HAP I System Error:
111.2.0 File: SYS:SYSTEM/PRODAUD3.DB
This log file is permanently growing. I don't know, what I can do? How I
can eliminate this error?
Thanks in advance
Jerzy Pietrowski> This log file is permanently growing. I don't know, what I can do? How I
> can eliminate this error?
>
See:
http://www.novell.com/support/search...200%2021044996
unload nlsmeter.nlm
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195 -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition
Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh MenonSaqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot
Maybe you are looking for
-
Step by step guide to customising fluxbox?
I've had fluxbox installed for awhile now but have not really had the chance to use it properly yet as I've been unable to get it the way I want it. There seems to be a few guides available but they're a little spartan and confusing, and everytime I
-
New iMac 27" running Lion. Trying to add my HDTV as an extra monitor so I can watch the "Web Only" tv shows on Hulu. Just can't make it work and have found some threads elsewhere that indicate it would have worked if I was using an earlier OS. Is
-
Maintaining Time in Cats for Third Party Contract Employees
Hi , Can u please guide me how we can maintain Time recording in Cats for 3rd party contractual employees. My client has one unique no per #rd party contractual employee. We need to record his time followed by posting process for different service or
-
Master Previews disappear in Browser
Hi All Recently when I import files (RAW) and then edit to create a new version, the new version Preview displays..but the Master preview is just a blank box. I can still view the master in Full Screen, and still edit it to create new versions...but
-
Hello all, hope you can help me. Classic stopped opening. Poof. It used to open just fine, but now nothing. It's not hanging or crashing, it's simply not starting at all. No little startup window, I've repaired permissions, I've tried starting with e