Installation problem with the new iso after trying to install the LTS
I tried to install arch (i have always succeeded before) but i wanted to use the LTS kernel. When choosing packages i unchecked the linux package (which provides the 3 kernel) and checked the kernellts package.
After i was done with the configuration i got this error message (not exactly sure) something to do with the mkinitcpio : error Preset not found: '/etc/mkinitcpio.d/linux.preset'
The system was unbootable of course... I assume that it has to do something with the kernel version. Any help would be appreciated. Maybe i should try to install with the older iso...
Thanks for the quick reply. But I 've already formatted the partion... Can you tell me a way to do this during the instalation? If it can't be done should I use the older iso? I am not an expert by the way. I assume I could install the 3.0 first and then add the lts kernel but I hate installing anything that I will not use (that's one of the reasons I want to use Arch). Thanks in advance.
PS. Would the archboot iso help?
Last edited by Denethor (2011-08-30 19:05:29)
Similar Messages
-
I am not able to restore my iphone 4 after trying to install the new softwear. I tried every single possible way. What can I do?
There are two ways that a backup can become encrypted:
You chose to encrypt it, then forgot the password.
If you have company-provided MS Exchange access your IT department has the option of requiring your backup to be encrypted. The first time you backed up or synced after installing MS Exchange you were prompted for a password. That is the password you need.
If you don't have the password any longer there is no way to restore the backup. -
How to stop the spinning ball after trying to install 10.7.3?How
How to stop the spinning ball after trying to install V10.7.3?
Boot from your recovery partition by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
When the Recovery desktop appears, reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin. -
I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?
I got the macbook from a friend a few years ago and it already had OSX Lion installed. Whenever it boots from the Snow Leopard disc it says it cannot install from disc. Is there anythingI can do or should I take it to an Apple store to get them to boot OSX Lion for me?Insert your Snow Leopard disc and restart, press and hold the C key as soon as you hearthe startup chime, hold C until you see the Apple Logo. When your computer starts up you'll be at the first install screen, choose your language and click the arrow to go to the next screen. This screen has a menu bar, from the Utilities menu select Disk Utility, select your hard drive, this is the one with the manufacturers name or numbers, click the partition tab and then delete any existing partitions by selecting them and clicking the minus. In the drop down box select one partition and click apply. Name your hard drive and click erase. When it's done quit DU and go back to the installer, install Snow Leopard. When the installer is done and the computer is back up and running run Software Update to get to 10.6.8
-
Error 7 windows error 126 after trying to install the latest update
error 7 windows error 126 after trying to install the latest update
See Here
Unable to Update or Restore
http://support.apple.com/kb/HT1808
If the device has been modified, this will not necessarily work. -
In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZIn illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ -
When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I received the new update from Itunes and after installing, I couldnt get into my Itunes. I get a message from Windows saying that an MC file is missing and to reinstall I tunes. I have reinstalled 3 times, the first time I didn't remove the old version, I installed the update over it. Next I tried the repair function under Control Panel. After that, I uninstalled Itunes and reinstalled again from the website. I still get the same message about missing files from Windows.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Nano ver 5/6 doesn't show up in iTunes even after having to reinstall iTunes because of problems with trying to update iTunes after receiving message from Apple that an update was available. Other Apple products are showing up.
Hello Bill,
Thank you for the details of the issue you are experiencing with your iPod nano. I recommend reviewing this article for steps to take when your iPod is not recognized in iTunes:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I recently upgraded from my iPhone 3 to iPhone 4s. My old iPhone had not completed a sync in some time because of a faulty cable. But the old phone still will not sync properly even with the new cable.
Now that I have my new iPhone, I would like to first sync the old phone so all the data will be available for the new phone. I would also like to have an extra copy of my audio ebooks on the old iPhone so my husband and I can both listen at the same time using earphones while driving long distances in the car and then discuss the book. We have been unable to do this with the old iPhone alone due to constant road noise.I'm not sure what made the difference, but I tried again and it worked this time. ???????????
-
Error 3194 on iPhone 5 after plugging into PC laptop and trying to install new software. Told it was in recovery mode and to restore iPhone.
Alannah77 wrote:
Error 3194 ...
Please see the More Like This section on the right. -
Problem with Excel user form when trying to hide the excel workbook
My excel application has a userform which contains combo box and list box
I am using the below code to make my excel file invisible when its open (i.e it directly shows the userform)
Workbooks("Budget.xlsm").Windows(1).Visible = False
for my excel file....But the problem now is that
My values for combo box are in the Budget.xlsm file and since the
Workbooks("Budget.xlsm").Windows(1).Visible = False
is now invisible ...the combo box have no values in it.... Also I have some List boxes in my userforms which are linked to some range in the excel file even they are blank
The values selected in the userform are also send back to the same excel file (Budget.xlsm)
Could you please help me with this
Regards, HiteshHi Hitesh,
How do you specify combo box items value? Do you mean the items of combo box will be cleared when the workbook hidden?
Base on my test, the combo box’s items won’t be clear when the workbook hidden.
Simple code:
Private Sub CommandButton1_Click()
Workbooks("MyExcel3.xlsm").Windows(1).Visible = False
End Sub
Private Sub CommandButton2_Click()
Workbooks("MyExcel3.xlsm").Windows(1).Visible = True
End Sub
Private Sub CommandButton3_Click()
ComboBox1.List = Worksheets("Sheet3").Range("D1:D4").Value
End Sub
Please provide the detail information of your issue.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem with Serial Number when I tried to do the UD
Dear Colleagues,
I need your help with the issue below:
I have one material that Serial Number profile was not configured. The GR was done for 3 pcs, these material is to do the UD, but before to completed the process (UD) the material was changed and the Serial Number profile was set.
More 27 pcs were receiced, and for these pcs the Serial Number as created in the Material Document.
The user was not able to do the UD, and I requested him to use the t-code MBST to cancel the Material documents, but is not able to do this process for the Material Document that doesn't have the Serial Number (This is the fisrt Material document regarding that 3 pcs).
Now I have these 3 pcs for to make the UD and I'm not able, because I have an Error inform that I need to have the Serial Number, and I'm not able to cancel the Material document as well.
I want to know if we have some SAP Note, or one procedure that I can use to resolve this problem.
Many Thanks.
OrlandoAt least you are entitled to the prize for having the longest topic description on the Support Forum.
Leo -
I am new to MAC systems...i bought one recently i loaded with some items i dont want anymore on the MAC. i attempted resetting to default settings but instead, i erroneosly wiped off the entire hard drive clean. I attempted to reinstall the the OS X, but i kept on having download failure. what i can do to salvage the situation.
but i kept on having download failure.
May be your internet connection ...
OS X Recovery requies a high speed broandband connection via Wi-Fi or Ethernet as noted here > OS X: About OS X Recovery
If it's convenient, you can sign up for Apple workshops > Apple - One to One -
ITunes doesn't load after trying to install the newest version
Hi. About three days ago when I opened iTunes it asked if I'd like to update. I decided too. After instaling when I opened it I got a message..I'm not sure what it was now, but it said something about needing a new version of Quicktime to opperate. So I downloaded the newest Quicktime. I no longer got that message, however, iTunes will not load. I get the little loading arrow, however thats as far as it goes. My dad tried to fix it and noticed iTunes is running in the background. But only in the background.
I completely uninstalled iTunes and re-installed it from my disc. It still won't load. I'm getting really frustrated because I want to update my iPod and am unable.
Any help please?Hi vinyamar
I wonder whether you are getting the common conflict problem with Norton AV (or any other AV/antispy software for that matter)
I would recommend this approach
1.Back up your entire iTunes library folder preferably into a separate drive or external memory first. Search the forums if you are not sure how to do this.
2.Ensure you download the iTunes programme to your pc (save to desktop for example) not try to install online.
3.Once you have downloaded iTunes 7 to your pc, disable your AV/Spy software before you try to run the install.
4. Run the install, then reboot and allow your AV/antispy programmes to come back on (if they don't automatically on restart)
Try opening iTunes
If you have done this, and it still doesn't work, it may be your chosen AV software and/or firewall is not allowing iTunes to start up. Check the setting on your software in this regard.
I appreciate it is very frustrating when this happens, but be patient and search the forums. There are fixes for just about every problem!:)
In the worst case scenario you may have a nasty little virus which is blocking your iTunes launch. If you don't get any luck with the earlier method, try downloading and running EWIDO (an AV programme) scan and see if that helps as well. www.ewido.net/en/
It is free and incredibly useful in removing certain adware and malware that prevent iTunes from installing on Windows. Good Luck.
Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP SP2 20Gb iPod
Maybe you are looking for
-
I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more so
-
I have been taking online courses at Colorado Tech and when my firefox updated to 55.0, my classes were mot accessible because they suppported version 4.0 or lower. I can't seem to find a version 4.0 to go back to, since 4.0 has been working fine for
-
HOW TO WRITE ABAP PROGRAMMING IN JAVA BY USING NETWEAVER
HI, i am working with bapi(mean is calling bapis in my java programs). please tell me the how to write abap programs in nwds Thanqqqqqqqqq Guru
-
Export only of developped pictures
Hi, I am a beginner in Lightroom 4.3. I loaded some folders with my pictures. In Lightroom I developed some of it, others I did not. Now I want to export only those pictures which I developed. I know, I can manually select at the bottom line all pict
-
Hi Gurus Presently I am doing the physical inventory thru Batches. the process is : MI31 MI24 MI04 MI20 MI07 My client want physical inv stock in to one batch only. So i can count all batches stock put in to one batch. if i did like that wht is the