Installation problems in MSCS ORACLE 10.2 ECC 6.00

I am writing to report some unexpected installation problems. I am installing SAP ECC 6.00 in a MSCS cluster environment (Windows 2003 / Oracle 10.2) in our production environment and I am having problems during the installing the central instance phase. The sapinst_dev shows the following error: CJS-30102 Checking the database for installation type failed, Also the jsourcecheck.log shows the following error: com. sap. engine. frame. core. configuration. Configuration Exception: Error while connecting to DB and java. sql. SQLException: Excepción de E/S: The Network Adapter could not establish the connection     at oracle. jdbc.driver. DatabaseError. throwSqlException (DatabaseError.java:112)
The database is currently running without any problem and all the services (SAP and Oracle) as well.
Following the installation guide, I performed the almost all the steps successfully:
     Oracle RDBMS, patches and Oracle fail safe software on both nodes (successfully)
     Install the central services instance for ABAP (ASCS) on the first MSCS node (successfully)
     Install the central services instance (SCS) on the first MSCS node (successfully)
     Cluster the first MSCS node (successfully)
     Install the database instance on the first MSCS node (successfully)
     Cluster the additional MSCS node (successfully)
     Install an enqueue replication server(successfully)
     Perform additional steps for the Oracle Fail Safe configuration (successfully)
     Create the Oracle Fail Safe group (successfully)
     Set up as shared database directory in your Oracle Home (successfully)
     Add the Oracle database resource to the Fail Safe group (successfully)
     install the central instance (Failed)
     install at least one dialog instance (not installed yet)
As you can observe, I have performed the create oracle fail safe group activity first and then the install the central instance later. Reading the sap note 967121 today, I just realized that there is a wrong installation sequence; the sap note 967121 (actualized date: 17/OCT/07 ) says that you must install the central instance before you create the Oracle Fail Safe group. Is this sequence compulsory? Or can I continue the installation process?
If this sequence is compulsory do I have to reinstall all the predecessor activities or should I undo just the create oracle fail safe group activity?
Please let me know if the error which is showed in the installation of the central instance phase is because the wrong sequence or it is due to another reason.
Our cluster configuration is:
4 network card
Public network cards:
Ip:192.168.2.240 (hostname: ccaribe3rp1, Node A)
Ip: 192.168.2.241 (hostname: ccariber3p2, node B)
Private network cards:
Ip: 10.10.10.1 (hostname: ccaribe3rp1.ceramicascaribe.com, node A
Ip: 10.10.10.2 (hostname: ccaribe3rp2.ceramicascaribe.com, node B
Clustergroup:
Cluster group name: SAPPRO
Cluster group Virtual IP: 192.168.2.239, network name: SAPPRO (subnet mask 255.255.255.0)
SAP cluster group:
Sap clustergroup virtual IP: 192.168.2.238, network name: sapgrp (subnet mask 255.255.255.0)
Database cluster group:
Database cluster group virtual Ip: 192.168.2.237, network name: dbgrp (subnet mask: 255.255.255.0)
We have performed the mapping of the host names to the IP addresses on the windows host file already.
I would be very grateful if someone kindly can help me to solve this problem.
Best Regards
Boris Romero

Hello Boris,
one of the main problems is that step
"Create the Oracle Fail Safe group (successfully)"
cannot be successful because you need to run configtool and change the secure store as described in installation guide. At this stage the configtool does not exists (documentation error for ECC6.0 guide), so the correct sequence is to install CI and cluster the DB, but not vice versa.
Which stage is the sapinst braking up?
Is this beginning, middle or end of installation?
Did you try to run configtool and modify secure store?
best regards

Similar Messages

Netweaver 2004s installation problem on Windows: Oracle 10G

Hi Friends,
I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
The server has 6GB RAM and has 5GB of free space on C: and a free sapce of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver 2004 S installation???
I am installing a central system.
First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
I chose Install MCOD and proceeded further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
Have any of you faced this problem ? Please let me know how you have proceeded further.
Before starting the installation one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system and even then i proceeded with the installation.
Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
Thanks
Diwakar

Hello Diwakar,
If you are just installing NW2004s then it is not mandatory to install Solution manager.
To increase the swap space --
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
you canIncrease swap space/page file here.
Do not install the system as MCOD, make the seperate database.
Do revert for further doubt.
Best Regards,
Sachin.

Installation Problem Developer 6i/Oracle 8/Windows NT4 Please help.

Hi,
I am trying to install Oracle Developer 6i and Oracle 8
under Windows NT platform. I had several kind of problem. Atlast
I found the installation tips very help and followed it step by
step. Still I am facing the problem. Let me explain what i did,
step by step,
1.downloaded the Oracle forms self extract file. Unzipped. Ran
the Setup.exe.
2.This prepared for Oracle Developer installation. I selected
default path and home(d:\ORANT and home_Default). Selected
oracle forms and installed it.
3.Repeated step 2 to install reports 6i.
4.Restarted the system.
5.Created another directory d:\orantnew
6.Used the Oracle 8 CD and installed using the Autorun.Selected
different path and oracle Home this time.(D:\orantnew and
home_New).
7. Selected the Oracle Enterprise Edition option and did the
installation.Rebooted the system.
8. Did the TCP/IP changes explained in the Step (5) and Step (6)
given below in Mr.Krishna's reply.
9. Tried to start the listner by following Step (7) the listener
won't start.
10. Went ahead and copied the TNSNAMES.
Connected to SQL*Plus using Start/Program/Oracle-OracntNew using
SCOTT/TIGER and connect went thru.
Then tried "CONNECT" from form builder, won't connect. I think
the error message was some thing related to TNS..(Since I have
uninstalled all the Oracle components now i can't give the exact
error.Sorry). I would like to know if there is anything I am
doing wrong or missing out something.
Note : While uninstalling the oracle components i had problem
removing the bin directory. So I had to stop some of the
services
(OracleServiceORC1 and OracleStartORC1 from
start/controlpanel/services option) in order to delete the
oracle components.
Please someone let me know how can I install Oracle 8 and Oracle
Developer 6i,in windows NT platform.
Incase if i am doing anything wrong in the above given step or
missing out something pl let me know.
Thanks.
Extracted from another thread
Hi, >Try these steps, but you need to change a few things for Win2000 even I am trying, but Listener does'nt start there is a
problem I am looking into it, If you find the solution pl let me
know, these work fine on Win95/98 I have tried and they all work
fine.>-------------------------------------------->Installing
Personal Oracle 8. 1. 6. 0. 0 with Developer v6i (Reports 6. 0.
8. 8. 3, Forms 6. 0. 8. 0. 9)>On Windows 98>Note: All other
combinations may or may not work.> If you want to install
designer as well, do it now.
** Clean all Oracles off the computer using the following instructions. (Windows 95 and
Windows 98)
1. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
2. Go to HKEY_CURRENT_USER\SOFTWARE\ORACLE
3. Delete the ORACLE key.
4. Delete HKEY_LOCAL_MACHINE\SOFTWARE\ODBC pertaining to Oracle.
5. Delete HKEY_CURRENT_USER\SOFTWARE\ODBC pertaining to Oracle.
6. Edit your AUTOEXE.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path settings.
7. From the Windows Explorer (or from the command prompt), delete the Oracle Directory
(Oracle Base).
8. Delete < System_Drive > C:\Program Files\Oracle (from the Windows NT Explorer or from the command
prompt).
9. Delete Icons from < System_Drive> C:\Windows\StartMenu\Programs\Oracle - <HOME> and <System_Drive>
C:\Windows\StartMenu\Oracle Installation Products. Where<HOME>
is the previous HOME name.
10. Reboot the system.
Installing Developer 6i(Forms and Reports)
1. Download the file from OTN site or Install from the CD. Install the installer. It will go
into a new default Oracle home that it will create. When you go
to install your Developer CD, close the installer that comes up
with the CD autorun. Go to the programs menu and Oracle for
Windows 95 and click on the installer there. Once it is open,
browse to the CD you wish to install. (installr/install/us)
2. Start installer. Install Developer 6i first to default directory, Orawin95 How? Start installer, follow the prompts
that appear on the screen, you may have to do this twice, once
for Oracle Forms and once for Oracle Reports, after the
installation is successful reboot the system.
3. If you want to install Designer 6 as well, do it now. (But I have not installed
the Designer ) Designer has to be installed before PO 8. 1. 6,
because PO816 can detect only one Oracle_home.
4. Create a new folder on your root directory called Orawin98. Start the installer set-up from where you downloaded it and
select Orawin98 to install it in this time. You also need to
give this second home a name whatever you want, but through out
the process, you have to use the identical name, that is
critical. Orawin98 indicates this name in these instructions. Do
not reboot. Install Oracle 8.1.6 to the directory Orawin98 using
the installer. Reboot the system.
5. Go to Start/Setting/Control Panel/Network, if you do not have TCP/IP installed, install it
now, if you do, highlight TCP/IP, click properties. Select DNS
tab, select enable DNS, at the host area, type "Orawin98", leave
domain empty. Go to Identification Tab and enter your database
name, in this case BBM. Reboot the system after you finish.
6. Configure your database listener. Go to Start/Programs/Oracle- Orawin98/Network Admistration/Net8
Assistant, a window will pop
up, at the window expand Local and expand Listeners and double
click it, you will see a new window, go through all the tab
menus. At location address 1, Host name: use "Orawin98", Port
use: 1521 (default). And at location address 2, Host name:
use "Orawin98", Port use: 2481, go to the file/ save, close Net8
Assistant.
7. Start listener how? Go to Dos Window, type LSNRCTL, return, at LSNRCTL>, type Start. Listener should start
successfully, if not, you need to go back to Net8 Assistant to
check configuration.
8. Copy file "TNSNAMES" in directory C:\Orawin98\Net80\Admin to C:\oraein95\Net80\Admin.
9. You are finished.
10. To connect Forms/Reports/SQLPLUS to database - First start the
Listener, then start the database. Next, go to File menu in
Forms/Reports and select Connect. Type in user name and password
(system/manager or whatever) in this case it is SCOTT/TIGER and
the database name is your "DATABASENAME". When you want to quit
you need to exit from file menu of Forms/Reports, then you need
to stop Listener and then shut down database.
11. You can rename your computer name in your original name. (for local networks)
Let me know if it is working.>null

Install Forms in one directory (You can have reports in the same
directory).
Install oracle DB in another directory.
Don't change any file and reboot.
The listener will start automatically as a service.
(If not from a command line write "lsnrctl start" to start it).
To connect from forms/report to the DB you need to activate the
sqlnet easy config tool from the directory where forms is.
Follow the wizard to define an entry in the tnsnames.ora file
automatically.
Then you can use your forms with the DB.
(IF you get problems it usually helps to let us know the error
code you get so we can direct you in the correct direction).

Oracle Installer Problem while installing Oracle 9i on HP Unix

Hi Everyone ,
I had earlier installed 9.2.0.1 on Linux and had no probs whatsoever . When i am trying to install Oracle 9.2.0.1 on HP Unix , the Oracle Installer opens up a window saying CHOOSE JDK HOME DIRECTORY . I have already set the PATH environment variable to point to /opt/java1.4 and /opt/java1.4/jre/bin and also JAVA_HOME to point to /opt/java1.4 . Even after trying to put the directory information it refuses to go thru giving the Error INVALID JDK HOME.PLEASE ENTER CORRECT JDK LOCATION.
Any replies would be greatly appreciated
Thanks
Ravi

This could be due to you have multiple JDK homes like java1.4 and java1.3. Instead of type JDK home in the windows box, try to browse and select the JDK home and try it. Otherwise, if you have multiple JDK homes, then try to remove one of them.

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Oracle 10g release 2 installation problem on XP

Hi
I have some strange problems during installing oracle on my windows xp system.
Everything goes fine until the DB configuration assistant starts to perform its tasks.
The error is 'ORA-01919 XDBADMIN role does not exist'. I`ve searched the web but found nothing which could solve my problem. I think that the problem appears because of some security policy problems. Before installation i had created logon ID oracledba and assigned it to ora_dba group , later i had added the log as batch job priviledge to the oracledba. Please help if You know what may be a reason of my problems.
Regards
t.o.

Hello
Thanks for response. In both cases the problem is the same. It appears during instance creation. First XDBADMIN role doesn`t exist , then some error about unsufficient priviledges(there are proper usesr in usergroups attached ). I also tried to install it by deleting loopback adapter , disconnecting the computer from the network etc. Every attempt was failure. I`ve noticed that during prereq. check i get an error about service packs, error code OUI-15038 which is telling to install recommended service back because there is exception on string 'Pac'. I don`t understand it because I have an XP sp2 with lastest upgrades & service packs.
p.s.
please forgive me my english, it isn`t my native language.

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Crs installation problem in oracle 10g rac with NAS storage

Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
Mugunth

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Oracle 8.0.5 Post Installation Problem

Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
null

Phan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null

Installation problems with oracle 9iAS v1.0.2.2.2a

Dear all, i had been having a problem to install oracle 9iAS v1.0.2.2.2a on Windows 2000 Service Pack 2 edition for the past 5 days.
I had read through the installation guide and follow steps by steps instructions. but the installer would just stop at 100% "Copying welcome.html or Copying demo.gif". It only leave with a step that it would reach the configuration setup. I am wondering anyone encounter this problem.
I had tried to install on notebook and desktop with the same platform. On the notebook, i have oracle 9i database release 2 installed on it. Thinking it might be a compatibility problem, i tried installing oracle 9iAS on a desktop with a oracle 9i database client. But i would want the application server and database to run on the same machine. Should I wait for the oracle 9iAS release 2 for NT or anyone have any advise on my problem.
i would appreicate if anyone can help. thank you.

Maybe this is a bit of a simple question. But, do you remember how long you waited, when the progress bar indicated 100%? The installation progress status does indicate "100%" for a while, doing some "last minute" stuff, before moving on to the "Configuration Tools" phase.
Yes, as Ashesh stated, Oracle9iAS 10222a and Oracle9i Database can co-exist on the same machine, as long as they are in separate ORACLE_HOMEs. And, yes, the structure you described (\oracle\database and \oracle\iASHome) does qualify as "separate ORACLE_HOMEs".
Cheers!

Oracle BI SE One Installation problem - Please help

Hi,
I am trying to install Oracle BISE1 on a virtual machine having a Win Server 2003 (32 bit) OS. In the last step...I got stuck with the installation of Configuration Assistant and the error which I got was:
Command = C:\oracle\bise1\db\install\bise1config.bat has failed
Execution Error : BISE1 Configuration Assistant failed
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:428)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:515)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:345)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at oracle.as.config.bise1.util.DBUtils.getConnection(DBUtils.java:18)
     at oracle.as.config.bise1.action.UnlockAccounts.execute(UnlockAccounts.java:35)
     at oracle.as.config.bise1.BISE1ConfigAssistant.main(BISE1ConfigAssistant.java:76)
Then in one of the similar previous post I read that this problem could be solved by giving administrative privileges to the file "E:\oracle\bise1b\db\install\bise1config.bat"
[Previous Post for the same problem - http://forums.oracle.com/forums/thread.jspa?threadID=955418&tstart=60 ]
I did that and hit the retry button. But this time I am getting a different error as follows :-
The Oracle system identifier(SID) "bise1db" already exists.
Specify another SID
I guess this is my 4-5 attempt in the last one month. I have been unsuccessful in all my attempts so far. Kindly help at the earliest.
Thanks.
Edited by: user8918282 on Apr 22, 2010 3:14 PM

This behaviour is due to known bug in patch detection algorithm which has been fixed in MU1 release.
You have two options: you can either download S1AS7 MU1 release which contains fix for this problem or you can use following workaround: temporarily rename /usr/bin/showrev file and start installation. Installer will report that it cannot detect patch level of the system, but it will let you proceed with installation. Once installation is done, revert showrev file to the original name.
Thank you.

URGENT - Oracle 9i, Oracle 9iAS, and Oracle 9iAS Portal Installation Problem

ERROR :
1. Objects with type JAVA CLASS with more than 30 characters are truncated to 30 characters
2. There are only 30 objects with type JAVA CLASS are installed (instead of 334) mentioned on the troubleshooting guide
3. Oracle9iASHttpService automatically stops after starting the service
Environment :
Windows 2000 Server
Oracle 9i 9.0.1.1.1
Oracle 9iAS 3.0.9.8.2 (Oracle 9iAS 1.0.2.2.2a)
PDK Services for Java version 3.0.9.0.4 (from Patch used to install 3.0.9.8.2)
Patches 8.1.7.1.1, 8.1.7.1.5, 3.0.9.8.2
I installed the Oracle 9i, 9iAS, Portal and the patches based on the installation instructions (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/DOCUMENTATION/INSTALL_GUIDE_9I.PDF)
I tried adding the Sample Web Provider I got ORA-29531 error on HttpProviderDispatcher. Then I checked the Patch 8.1.7.1.1 installation, they are some scripts that need to be run that was not part of the 9i/9iAS installation instruction. I run the suggested scripts(catalog.sql, catproc.sql and utlrp.sql) and modified the jserv.properties to point the xsqlconfig.xml to ORACLE_HOME\oracore\admin.
The error still persisted. From the Troubleshooting PDK Services for Java, one of the suggestion is to run the sql command :
Select object_name, object_type, status from user_objects where object_name like '%HttpProvider%';
which resulted to an object with name '/3334f18_HttpProviderDispatche' without the 'r' at the end
and
Select count(object_name) from user_objects where object_type='JAVA CLASS';
which resulted to only 30 VALID object. According to the installation instruction, there are supposedly 334 objects.
I checked the object_name of the other JAVA CLASS objects, all the names of the objects are all less than 30 characters. It looks like that the objects with the object_name > 30 are truncated to 30 characters.
Then I rebooted the machine, when the machine went back on Oracle9iASHttpService stops automatically after it has been started.

I have posted question on that thread and there is no specific solution from our problem. From the Oracle PDK Troubleshooting PDK Services for Java, it looks like there is a problem on the Oracle Portal installation. I tried recompiling the packages and my problem worsened. Now I cannot start the Oracle9iAS HTTP Service.

Installer problem - Oracle 11g on Redhat ES 5.1 (x86)

Hi,
I'm trying to run the "runInstaller" script to install Oracle 11g onto my Redhat ES 5.1 (x86) machine and the following error is being reported:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 1409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1407 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-01-10_04-46-50AM. Please wait ...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I copied all the installation tree to /tmp/oracle and ran chmod -R 777 * to make sure I could see all the files.
I've been logging onto the server as the oracle user.
I've also got Java v1.5.0.6 installed
I've run out of ideas - anyone able to assist ?

I've sorted it. Was originally copy unzipped install files from DVD into /tmp but think there must have been some corruption. I now copied and unzipped the install file onto the RH machine and it's now working.

Oracle 8.1.7 installation problem on Window 2000 Professional

Hi everyone, I have a problem of intalling Oracle 8.1.7 on Window 2000 Professional. When I started to install Oracle 8.1.7 when I click install I get this error message
"Jrew has caused error in Javai.dll"
and restart the computer, I restarted again and again and the same problem occured, would you please tell me how I resolve this problem. Thanks in advance.
Mesfin
[email protected]
[email protected]

Intel says there is a bug in oracle's OUI as well other swing based programs. The solution is to copy the CD to local drive and add -nojit as first parameter to JRE_MEMORY_OPTIONS e.g. JRE_MEMORY_OPTIONS="-nojit -mx32m"
This will enable OUI to run. Even after installing oracle Net80 conf. asst won't start due to same reason.
Go to HOME\admin\tools\ and edit netca.cl and netasst.cl to add same -nojit before -classpath.
Do this for every tool that gives this prob such DBA studio...
Ashish

Installation problems in MSCS ORACLE 10.2 ECC 6.00

Similar Messages

Maybe you are looking for