Installation problems with oracle 9iAS v1.0.2.2.2a

Dear all, i had been having a problem to install oracle 9iAS v1.0.2.2.2a on Windows 2000 Service Pack 2 edition for the past 5 days.
I had read through the installation guide and follow steps by steps instructions. but the installer would just stop at 100% "Copying welcome.html or Copying demo.gif". It only leave with a step that it would reach the configuration setup. I am wondering anyone encounter this problem.
I had tried to install on notebook and desktop with the same platform. On the notebook, i have oracle 9i database release 2 installed on it. Thinking it might be a compatibility problem, i tried installing oracle 9iAS on a desktop with a oracle 9i database client. But i would want the application server and database to run on the same machine. Should I wait for the oracle 9iAS release 2 for NT or anyone have any advise on my problem.
i would appreicate if anyone can help. thank you.

Maybe this is a bit of a simple question. But, do you remember how long you waited, when the progress bar indicated 100%? The installation progress status does indicate "100%" for a while, doing some "last minute" stuff, before moving on to the "Configuration Tools" phase.
Yes, as Ashesh stated, Oracle9iAS 10222a and Oracle9i Database can co-exist on the same machine, as long as they are in separate ORACLE_HOMEs. And, yes, the structure you described (\oracle\database and \oracle\iASHome) does qualify as "separate ORACLE_HOMEs".
Cheers!

Similar Messages

CLOSE_WAIT problems with Oracle 9iAS on Solaris

All,
We have some simple JSP + Sevlets running on Oracle 9iAS on a Solaris server. After the App Server has been running for a couple of minutes we start to get several TCP connections with a CLOSE_WAIT status - as shown by a netstat output.
These seem to be a result of a FIN_WAIT_2 and CLOSE_WAIT pairing eg
Local Remote Swind Send-Q Rwind Recv-Q Status
SERVER.43009 SERVER.80 49152 0 49152 0 CLOSE_WAIT
SERVER.80 SERVER.43009 49152 0 49152 0 FIN_WAIT_2
Over time the FIN_WAIT_2 is removed, leaving the CLOSE_WAITs.
Has anyone else had this problem?
Keith

We're having similar problem. We have lot's of close_wait between Apache and OC4J.
Swetal

Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1

Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinath

Check out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful.

Problems with Oracle 9iAS in Windows NT version spanish

Hello:
We want to know if anybody has successfully installed Oracle 9iAS in a Windows NT Server (service pack 6) version spanish (not english).
We suspect that the the language of the NT machine (spanish) is the cause of the following error message when we try to configurate the Database Cache of the 9iAS:
"UNABLE TO VALIDATE NT CREDENTIALS"
when we give the password of the administrator user who is logged in NT.
Any help will be very appreciated by us.
Maria Consuelo Franky

Try placing this file in the \WINNT\system32 directory. The builder does not automatically include this file or install in on the new machine.

Installation problem with Oracle 8.1.7 on Mandrake 8.1

Hi all,
I am trying to install Oracle 8.1.7 (Rel 3) on Mandrake Linux 8.1. I changed all the parameters, tested everything, created the users (oracle & apache) and groups (oinstall & dba) as per the documentation. I downloaded the Oracle's "tar" file from the Oracle's web site. I unzipped that in "/shared" directory on my PC. I changed to "/shared/Disk1" directory and gave "./runInstaller". A window is opening with the following buttons.
About
Deinstall products
Exit
Help
Installed products
Previous (disabled)
Next
Only "About" and "Deinstall products" buttons are working. None of the other buttons are working. When I press "Next" nothing is happening.
Could anybody help with this problem. I really appreciate it.
Thank you very much in advance,
Murali.

Hi all,
This problem got solved. Its very silly thing. Number lock should be off, when you are running Oracle Installer. It worked for me. (This is for Mandrake Linux 8.1)
Regards,
Murali.

Installation Problems with Oracle 8i and Win98

Yesterday I tried installing Oracle 8i Personal Edition from CD. I completed installation up to "Database Creation in Progress", initializing phase. It stuck at 85%. The CD did not make any noise, and it stayed at 85% for 53 minutes.
Today, I downloaded Oracle 8i. It unzipped with no problem. I uninstalled, then tried to install. I got numerous .dll file errors in writing to file c.
The CPU is 500mz, 128 S-DRAM PC-133 Memory, there is 32 gig free on hard drive, Browser is IE Ver.5.5, O/S is Win 98.
Thank you
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename - psoracle81798
- Date/Time 02/08/02 10:05 am EST
- Browser + Version - I.E. Ver 5.5
- O/S + Version WIN98
- Error Msg: Error in writing to file C

Change Compiler to egcs 1.1.2-24.
Try again.

Installation problems with Oracle 8.1.7

I have tried to install oracle 8.1.7 on my computer (NT), but Oracle Installer didn't start.
Java = jdk 1.4.0, Proc. Pentium 4
Is there any other way to install oracle 8i without java installer.
Regards
Robert

Hello,
Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site.
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on the Oracle Database Server, Oracle9i Application Server Containers for J2EE (OC4J), Oracle9i JDeveloper, Reports, Forums, SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/start/otnServiceNetwork/intro.html?src=912386&Act=6
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Regards,
OTN

Installation problemes with oracle 9.2 on SLES9

Hey,
i want to install Oracle 9.2 on SLES9, but shall i start the runInstaller in the shell?
'Cause whenever i want to start it in the shell, i get an error:
Initializing Java Virtual MAchine from /tmp/OraInstall2005-09-19_01-43-28PM/jre/bin/java. Please wait...
Error occurred during initialization of VM
Unable to load native libary: /tmp/OraInstall2005-09-19_01-43-28PM/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Can someone help me?
Thanx Daniel

Hi.
Looks like you are missing some packages.
Have you installed the following packages:
* glibc-2.3.3
* gcc-3.3.3
* gcc-c++-3.3.3
* libaio-0.3.98
* libaio-devel-0.3.98
* make-3.80
* openmotif-libs-2.2.2-519.1
* orarun-1.8-109
I was not able to find this information in the 9i R2 installation guide, however, the release notes for 9.2.0.4 gives a more detailed description on the pre-installation tasks.
This document could be found on technet under the following link:
http://download-uk.oracle.com/docs/html/B13670_06/toc.htm
Good luck
rgds
Kjell

Installation problem with oracle 10g release 1 in RHEL ES 4 platform

Hi,
I am facing such a problem. I want to install Oracle 10g release 1.
I am using linux 86_64
os is RHEL ES 4 UPGRADE 5 X_86_64
When i put the command ./runInstaller It shows os is not supported.
Is there any way to install this oracle version.
Can u please suggest which version os is suitable for this.
please suggest.
Thanks & regards

WHICH 10gR1 software do you use? Oracle provides different versions, you need 10.1.0.3 for Linux x86-64 from the OTN download page.
By the way I would install 10gR2.
Werner

Installation problem with oracle 11i e-business suite

Hai iam installing 11 i financials for the first time on windows server -2003
i have completed the first stages of validation system configuration .
and later while extracting files from the location it shows error as
1.APPS_ORACLE_HOME environmental file was not created? please tell me how this will be done in detail>
2.Apps configuration was not created?
3.RW-00023 -ERROR-DBC File was not created?
please give the replies in detail
thanks
.

Thanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users.

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Problems with oracle 9i installation in windows xp

I am having a problem with oracle 9i installation. I am getting error message like this "jrew.exe has encountered a problem and nees to close" can any body tell how to overcome this problem. I have cleaned registry also. I uninstalled java runtime environment and again installed java but i am still getting the message.

Hi Madhu,
The problem seem the "jrew.exe" file may be currupted.
Remove the file "jrew.exe" and try to reinstall Oracle.
Regards,
RKumar

Please Help: A Problem With Oracle-Provided 'Working' Example

A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)

If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference...

Problem with Oracle Designer 10

Hi,
I have a problem with Oracle Designer 10 version 9.0.4.7 installed in Windows 2000 platform.
I don't know if the origin of the problem is at the server side or client side. I try to launch the repository reports but it doesn't work. The screen never appear. I have to finish the client process but the oracle session remmains:
SID SERIAL# LOGON_TIME PROGRAM
============================
36 13137 01-12-2008 des2k61.exe
38 15583 01-12-2008 ckrpt61.exe
The second line belongs to repository report process.
I have to kill Oracle session manually. Do you know if the problem is in the server side or client installation??
SGA VALUES
=============================
Total System Global Area 320302432 bytes
Fixed Size 736608 bytes
Variable Size 285212672 bytes
Database Buffers 33554432 bytes
Redo Buffers 798720 bytes
Client values
=============================
1Gb RAM
Windows 2000 SP4
3Gb Virtual Mem
2 GHz AMD
Thanks in advance.

I have two homes for oracle developer ..
old ---- C:\*DevSuite*
new -- C:\>C:\*DevSuite_1*
I have executed the below statement .........
C:\>C:\*DevSuite_1*\bin\tnsping disd9i
TNS Ping Utility for 32-bit Windows: Version 10.1.0.4.2 - Production on 09-SEP-2
010 19:29:22
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\*DevSuite*\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(Host = VHRTY76.ASPNDT.NET)(Port = 1521))) (CONNECT_DATA = (SID = POU)))
OK (720 msec)
I think the new one is point to the old version 9 - sqlnet.ora and tnsnames.ora .
How to point the new one..?
Can I have two tns_admin as env variable ?
Edited by: user12045030 on Sep 9, 2010 7:12 AM

Installation problems with oracle 9iAS v1.0.2.2.2a

Similar Messages

Maybe you are looking for