Installation problems with SAP Web AS 6.20 came with Official ABAP Ref

Can anyone help.
Purchased ref books with SAP WAS 6.20
I have followed the instructions for installation and everything goes ok up until 41%.
Installation of SAP DB server finished succesfully.
When I check the technical info on SAP Press where I bought the books it say's at 42% change disks and continue. As I'm as near to that as possible then I did just that, but when I press the next button nothings happens.
What does happen is that a new window appears with the folders from the disk in the drive, as though I'm supposed to select something; but what.
I am using xp home edition, with plenty of memory and plenty of hard disk.
Also created the Loopback Adapter but not sure if this needs configuring or what.
This is driving me mad especially as it means me cleaning all reference to sap from my hard drive along with entries in the registry.
The instructions to be honest are as bad as the minsap that came with ABAP Objects and which I had no success with.
I would have thought buying these books, that all these issues would have been sorted out, but obviously I was wrong.
Why produce such great reference books and ruin it with software that doesn't work.
Any help would be much appreciated.

Hi Peter,
Whereas I take your point. You are not telling me something that I don't already know.
Time is of the essence and time is something I don't have.
I am very busy and work in Switzerland 5 days a week and don't have any free time whatsoever. I travel back to the UK at the weekend for 1 day, so wasting time is not something I relish. End of moan!
I thought that these forums were there to help ?
I need to be spending valuable time on the product and not the installation.
You may, like others have a lot of spare time on your hands. I don't.
If the damn instructions were correct in the first place then people wouldn't be having these sorts of issues.
I am amazed at the number of installation issues there are and everyone appears to be different.
Obviously SAP have cornered the market because when you're in you can't get out.
I know quite a few people who work in SAP, and alI I hear is, we should not have gone for this ERP solution. That its over complicated (obviously for a reason), its slow and when you have problems its a nightmare to trace back to where the problem initially came from.

Similar Messages

Integration of Adobe Flex with SAP Web Dynpro ABAP

I am new to adobe flex development. i am following a tutorial prepared by
Mr. Karthikeyan Venkatesan (Infosys Technologies Limited) Integration of Adobe Flex with SAP Web Dynpro ABAP-for ABAPers
He used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe(At a time Build release I used low version only 3.5). I followed all the steps. At a time of Run the data was not came.
How to fetch the data?
Please Guide how to proceed.

Hi Laxmikanth,
For Adebo Flex help..
Please go through Thomas tutorial..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163&overridelayout=true
and ...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480?quicklink=index&overridelayout=true
Hope it might helps you
Thanks,
Kris.

Integration of SAP GUI with SAP Web UI in 7.0?

Hi Everybody ,
Wanted to ask how do we integrate SAP GUI with SAP Web UI in 7.0?Are these two different logical systems or Web UI is embedded in GUI itself? Will be waiting for the answer very soon.
Thanks
Puneet

Hi,
in CRM70 the WebUI is the one and only userinterface for the endusers.
The SAP GUI in CRM is only for administrators.
You could integrate SAP GUI transactions from different systems (ERP, CRM, RM, etc.) into Webclient UI.
In standard SAP this is done using the transaction launcher (ITS) - but there are also some concepts from consulting companies to integrate the SAP GUI without ITS.
Good luck.
Kind regards
Manfred

My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.

Problems Installing SAP Web AS - (Sneak Preview Edition)

All,
I am coming across this frustrating problem when I attempt to install SAP Web AS - J2EE System.
I am:
-logged in as the local Administrator on a Windows 2000 server (SP4)
-I have installed SQL 2000 Server Enterprise
-I have patched SQL to 3A
-I have installed the Microsoft QFE
-I have installed the corrected Collation.
Towards the beginning of the installation; the install stops with the error:
ERROR 2004-10-21 17:43:17
MOS-01011 'F:\usr\sap\J2E\JC00\exe/sapstartsrv.exe' returned with '-1'.
The sapstartsrv.exe.log is completely empty after I stop the installation.
The sapinst.log contains:
INFO 2004-10-21 17:39:59
Switched to user: j2eadm.
INFO 2004-10-21 17:39:59
Creating file F:\Sapinst\sapstartsrv.exe.log.
INFO 2004-10-21 17:39:59
Output of F:\usr\sap\J2E\JC00\exe/sapstartsrv.exe '-r' '-q' '-p' 'F:\usr\sap\J2E\SYS\profile\START_JC00_wbntcx50' '-s' 'J2E' '-n' '00' '-U' 'wbntcx50\SAPServiceJ2E' '-P' 'XXXXXXXX' '-e' 'wbntcx50\j2eadm' is written to the logfile sapstartsrv.exe.log.
WARNING 2004-10-21 17:43:17
Execution of the command "F:\usr\sap\J2E\JC00\exe/sapstartsrv.exe '-r' '-q' '-p' 'F:\usr\sap\J2E\SYS\profile\START_JC00_wbntcx50' '-s' 'J2E' '-n' '00' '-U' 'wbntcx50\SAPServiceJ2E' '-P' 'XXXXXXXX' '-e' 'wbntcx50\j2eadm'" finished with return code -1. Output:
T
Transaction begin ********************************************************
ERROR 2004-10-21 17:43:17
MOS-01011 'F:\usr\sap\J2E\JC00\exe/sapstartsrv.exe' returned with '-1'.
Transaction end **********************************************************
WARNING 2004-10-21 17:51:52
Installation canceled by user request.
Has anyone seen this problem or have an idea of what is causing it?
I have already:
-Uninstalled / Re-installed the SAP Web AS
-Uninstalled / Re-installed SQL Server
-Re-installed SP4 on the Windows OS
-Searched for notes related to this.
Thanks in advance.

Hi Daniel,
Thanks I solved the password problem differently , after I had tried using different passwords in vain, I selected the second installation option other than "Local Install". Then I unistalled, then reinstalled with "Local Installation" option that prompted me for new passwords.
The installation was almost 98% complete, but jcontrol.exe could not start up, I have already logged that error here, so I unistalled and now trying hard to rinstall, but some how MAXDB is stuck in my registry, I have tried to remove it using Contrl Panel -> Add Remove programs in vain, I deleted SAPDB from the hard drive, I went to the Local Machine in the regedit32.exe tried to remove anything to do with SAP because I could not see anything else to do with MAXDB or Xserver but I am still getting the error:-
INFO 2004-12-03 10:13:43
Copying directory C:/Netweaver/Portal PAM/SP9/MaxDB/NT/SETUPS to: C:/SneakPreview/MaxDB/NT/SETUPS.
INFO 2004-12-03 10:13:43
Copying file C:/Netweaver/Portal PAM/SP9/MaxDB/NT/SETUPS/DBM75.exe to: C:/SneakPreview/MaxDB/NT/SETUPS.
INFO 2004-12-03 10:13:43
Copying file C:/Netweaver/Portal PAM/SP9/MaxDB/NT/SETUPS/DBM75.exe to: C:/SneakPreview/MaxDB/NT/SETUPS.
INFO 2004-12-03 10:13:43
Creating file C:\SneakPreview\MaxDB\NT\SETUPS\DBM75.exe.
INFO 2004-12-03 10:13:46
Copying file C:/Netweaver/Portal PAM/SP9/MaxDB/NT/SETUPS/SQLSTD75.exe to: C:/SneakPreview/MaxDB/NT/SETUPS.
INFO 2004-12-03 10:13:46
Copying file C:/Netweaver/Portal PAM/SP9/MaxDB/NT/SETUPS/SQLSTD75.exe to: C:/SneakPreview/MaxDB/NT/SETUPS.
INFO 2004-12-03 10:13:46
Creating file C:\SneakPreview\MaxDB\NT\SETUPS\SQLSTD75.exe.
ERROR 2004-12-03 10:13:54
MDB-070021 Registry information for database software found in system but the software check failed. The software was not properly removed or installed incorrectly.
WARNING 2004-12-03 10:13:54
The step Validate_Sapdb_System with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|J2EE_Engine_SAPDB_Client|ind|ind|ind|ind|ind|0|SAPDB_DB_SOFTWARE|ind|ind|ind|ind|ind|0|Validate_Sapdb_System was executed with status ERROR.
It is a very frustrating installation/uninstallation process.
Thank
Faisal

SOAP Response Version Mismatch error with SAP web service

My company just recently upgraded to SAP CRM 7.
The old way of creating web services in SAP worked fine, but now, there is something a bit off with SAP. When I call the web service the send returns a Fault Event with the error : SOAP Response Version Mismatch
I had a simple web service created with only 1 text input and 1 text output to make sure that it wasn't the parameters or return type. I got the same error.
Searching on the forum or the web hasn't provided with any good answer to the issue.
Any thoughts on this?

Problem solved

8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]

================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Installation Problem in SAP NETWEAVER 7.0 SR3 ON RHEL5.4

Hi Everyone,
I am installing the SAP NET WEAVER 7.0 SR3 with ORACLE 10.G on RHEL 5.4 Operating System. I complete the java 1.4.2
and oracle installation sucessfully. when i am running the sapinst i got the error in the " IMPORT ABAP" phase.
Please can any one tell me what could be the issue and how to solve it.
Thank you

Loading of 'SAPAPPL0' import package into database: /usr/sap/QAS/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error ERROR: 2010-10-10 22:37:43 com.sap.inst.migmon.LoadTask run Loading of 'SAPSSEXC' import package is interrupted with R3load error. Process '/usr/sap/QAS/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error' exited with return code 2. For mode details see 'SAPSSEXC.log' file. Standard error output: sapparam: sapargv( argc, argv) has not been called. sapparam(1c): No Profile used. sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline ERROR: 2010-10-10 22:37:44 com.sap.inst.migmon.LoadTask run Loading of 'SAPAPPL0' import package is interrupted with R3load error. Process '/usr/sap/QAS/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error' exited with return code 2. For mode details see 'SAPAPPL0.log' file. Standard error output: sapparam: sapargv( argc, argv) has not been called. sapparam(1c): No Profile used. sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline ERROR: 2010-10-10 22:37:44 com.sap.inst.migmon.LoadTask run Loading of 'SAPAPPL2' import package is interrupted with R3load error. Process '/usr/sap/QAS/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2. For mode details see 'SAPAPPL2.log' file. Standard error output: sapparam: sapargv( argc, argv) has not been called. sapparam(1c): No Profile used. sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline ERROR: 2010-10-10 22:37:44 com.sap.inst.migmon.LoadTask run Loading of 'SAPAPPL1' import package is interrupted with R3load error. Process '/usr/sap/QAS/SYS/exe/run/R3load -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error' exited with return code 2.

Error: Requested resource does not exist with SAP WebAS..deployed an ear

hi,
i deployed an application using SDM gui deployement manger. the application is built using struts,spring etc. I have also created a datasource with Oracel 9i succesfully and hav associated it with the application.
When i try to access the application using the struts based path i get an "ERROR 404:- Error: Requested resource does not exist". I also tried accessing the index.jsp page directly without struts paths but dont know why i get an error "File [appContext/admin/index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples]."
The same ear is working perfectly fine with IBM WSAD but not in SAP Web AS ?? is there any configuration issues that i need to address ?? Kindly help me ASAP !!
Regards,
Vaibhav

Hi,
The Required server log contents are as follows:-
#1.5#000CF1AFC124017A000000020000067000041B1D550F525C#1155712701853#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Plain###Runtime error in compiling of the JSP file <C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp> !
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
 com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
Exception id: [000CF1AFC124017A000000000000067000041B1D550F4D94]#
#1.5#000CF1AFC124017A000000030000067000041B1D550F5C88#1155712701868#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/doculine#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Plain###Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:117)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.getClassName(JSPServlet.java:238)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.compileAndGetClassName(JSPServlet.java:429)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:169)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
 at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
 at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1001)
 at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:560)
 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:209)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
 at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
 at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
 com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.validate(JSPParser.java:243)
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.initParser(JSPParser.java:348)
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:105)
 ... 37 more
#1.5#000CF1AFC124017A000000050000067000041B1D550F5F94#1155712701868#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
Exception id: [000CF1AFC124017A000000030000067000041B1D550F5C88]#

Problem connecting SAP IS-U (ECC 6.0) with Business Objects Edge 3.1

Dear all,
I'm trying to connect to a SAP ECC 6.0 System (SAP IS-U) with Business Objects 3.1 (for example with Crystal Reports). I have installed the SAP RFC SDK on the ECC server and have imported these transport files:
Open SQL reporting objects
InfoSet reporting objects
Row Level Security Tool
Security functions
Cluster Definition Editor
But CR keeps returning this error "You do not have the necessary rights to design reports against the SAP System". I've read a few threads about that problem here. I couldn't find a specific "ABAP transport" - did I miss to import anything else?
Is there any way to check whether the transport files work as they are supposed to? Like the MDX parser connection test for SAP Business Warehouse.
Any other suggestions?
thanks in advance!

Hi,
I read about these authorization tasks in some other thread, but didn't know what to do.
But now I found the auth. object in the transaction SU21.
Since I cannot edit SAP_ALL I created another profile in transaction PFCG (just in case someone else is still messing with that problem) and added all activities of ZSEGREPORT ans S_RFC.
After that I added the profile to the users in question.
Now everything works like a charm.
Thanks alot!

TREX and ABAP-Client with SAP Web AS 6.40

Hi!
We want to use the TREX in order to enhance the performance of our own business object searches within our ABAP engine. Therefore I've heard that from ABAP we can use the TREX to search for business objects residing in SAP ABAP stack tables.
Currently we are working with ECC500 and SAP Web AS 6.40.
Has anyone experiences in this area?
Are there any How-To-Guides or s.th. like that?
What is the Software Level prerequisite of SAP Web AS 6.40 Release/Support Package? Or do I need SAP Web AS 7.00?
Thanx for any hints and tips!
By the way: Posted this question in the ABAP forum and got exactly zero replies.
Regards,
Volker

Hi Volker,
it would be better to upgrade to WAS 7.00.
There you could use the search engine service for business objects that was delivered with SAP NetWeaver 2004s.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a751a1ec-0a01-0010-f0ba-89e4c5cd0261
This would be preferrable, as direct access to the TREX APIs is not officially supported. SES gives you all the methods you need for indexing and searching on ERP objects.
Regards, Karsten

Help with SAP Web Dynpro IView

Hi,
Our developer created an planning file upload web dynpro via transaction RSPLAN. I am looking to create a appropriate IView for this so I don't have to hardcode the URL in an URL IView. From the list of available IViews I selected "SAP Web Dynpro".
The URL to the Upload is the following:
https://<server>:1443/sap/bc/webdynpro/sap/zrsplf_file_upload?planning_sequence=ZDWHOSPSAL
For the IView parameters I have the following:
In "Application Name" I have zrsplffile_upload_
in "Application Parameters" I have planningsequence=ZDWHOSPSAL_
in "Namespace" I put ZSMD which is the package
When I execute the IView I get the following error.
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Wrong WebDynpro-URL: no application name specified
Can anyone help me out with what I should put in the Namespace parameter and what else I might be doing wrong?

Hi,
This doc may be of use for you
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3e36d690-0201-0010-cd99-bfbb81bd33d9
Regards
Ayyapparaj

How to use SAP Router String with SAP Web Services

Hi All,
I have developed an SAP Web Service and I'm using it from a vb.net dll by using web reference.
I want to use an SAP Router string when I try to call web service but I don't how to do it.Should the url of my proxy contain this router string in itself or is there any other attribute that I should configure for this purpose?
Please help!!!
MERAL
My code is as in the followings .
(And my SAP router string is like /H/111.11.111.11/H/)
Dim srvProxy As New PSUDamacanaProxy4.Z_SDB_RFC_GetList
            srvProxy.Url = s"http://21.11.1.43:8000/sap/bc/soap/rfc"
            srvProxy.Timeout = 10000
            srvProxy.Credentials = New System.Net.NetworkCredential(strUserName, strPassword)
            srvProxy.Z_SDB_RFC_GetList(p_bayi, durum, True, miktar, telefon, expMusteri, expReturnValue, expSiparis, expTeslimat, expAdSoyad)
            musteriAdSoyad = expAdSoyad
            ReturnValue = expReturnValue
            srvProxy.Dispose()
            srvProxy = Nothing

Since I posted this question, I have abandoned the notion of
auto-generated web services and embraced the good old FDS concept
where the RemoteObject meta-tag does all the conversion work for
me. We are now using the Granite DS package and it is working well
for us. I would love to consume web services, but it just isn't
worth the hassle when all you have to do with Granite (and FDS) is
cast your return objects to the proper object type.
BTW, since this posting, I have investigated competing Flex
app frameworks. After my research, I checked out the PureMVC
framework. Wow!! Cairngorm always left me with an uneasy feeling
and I guess I am not alone. Apparently, Cliff Hall felt the same
way. That is why he started the project. I like his approach alot
more than Cairngorm especially since it includes notifications
which allow me to broadcast my own app level events independent
from the AS Event framework. Check out PureMVC. For what it is
worth, it has my humble endorsement. Cliff was even gracious enough
to acknowledge the other Adobe Consulting guys for their work. Good
for you Cliff, I respect that. Check out a better way at
http://www.puremvc.org/

Problem of SAP WebAS Engine is starting...

Dear experts,
i am working properly in portal but some time an error automatically arise
503 Service Unavailable 7.00
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
and i increase the heap memory to 2 gb in server0 file permsize to 512 mb as sujeested by some experts
but i got the same problem again after some time
please help..........

<<Do not post the same question across a number of forums>>

Remote Connection to SAP with SAP Web Dispatcher

Dear Experts,
i have installed a SAP Router + SAP ECC 6.0 IDES + SAP Portal 7.0 + SAP Solution Manager 7.0. The remote connection works.
SAP Router is in a DMZ
SAP ECC 6.0 IDES + SAP Portal 7.0 + SAP Solution Manager 7.0 are in another network only for SAP Systems
Fo security reason, i would like to install a SAP Webdispatcher with the SAP Router's Server.
I already:
have extracted the icmadmin.sar file
have executed the sapwebdisp -bootstrap command
have started the web dispatcher with sapwebdisp pf=sapwebdisp.pfl
have activated /sap/public/icman and /sap/public/icf_info/* services inthe SAP Solution Manager
As the saprouttab file for the saprouter, i would like to establish the connection to SAP withe the SAP WebDispatcher.
My questions are:
What are the parameters i have to put in the sapwebdisp.pfl file?
Do i have to create the PERMFILE and the AUTHFILE?
Any example of profil file? (another than the SAP Library example)
Thank you very much for your help in advance.
Best regards.
Pascal Tran.
PS: Here is the sapwebdisp.pfl file
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 50
add default directory settings
DIR_EXECUTABLE = .
DIR_INSTANCE = .
Accessibility of Message Servers
rdisp/mshost = <Solution_Manager_hostanme>
rdisp/msserv = sapms<Solution_Manager_SID>
ms/http_port = 81<Solution_Manager_Instance_Number>
SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
configuration for default scenario (medium size)
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8050
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt
Hostname per default
icm/host_name_full = <SAP_Router_Hostname>

Hello,
The two important paramters are covered in your profile.
Accessibility of Message Servers
rdisp/mshost = <Solution_Manager_hostanme>
rdisp/msserv = sapms<Solution_Manager_SID>
ms/http_port = 81<Solution_Manager_Instance_Number>
And the port on which your webdispatcher listens from outside world.
icm/server_port_0 = PROT=HTTP,PORT=8050
For additional security you can use the https port also.
I dont think you need to maintain any other file manually.
I had configured web dispatcher but for 640 stack. It should be more or less the same.
An example file sapwebdisp.pfl
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 1
Accessibility of Message Servers
rdisp/mshost = <hostname>
ms/http_port = 8101
ms/https_port = 8005
SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
configuration for default scenario (medium size)
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
wdisp/shm_attach_mode = 6
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=1443
icm/server_port_1 = PROT=HTTP,PORT=1081
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin
DIR_INSTANCE = C:\Secudir
ssl/ssl_lib = C:\Secudir\sapcrypto.dll
ssl/server_pse= C:\Secudir\SAPSSLS.pse
wdisp/ssl_cred = SAPSSLS.pse

Installation problems with SAP Web AS 6.20 came with Official ABAP Ref

Similar Messages

Maybe you are looking for