Installation program start and end date
My requirement is to capture both start and finish dates for an installation program. Will likely require 2 new fields at order line item level.
I was thinking about using USEREXIT_MOVE_FIELD_TO_VBAP. But where do I find the install information to move it to these new fields?
Thanks
Hi,
As mentioned by Ming, these dates are not supposed to prevent FI postings by SAP standard. However, you can create a validation in CO (OKC7) by putting as prerequisites your dates from PRPS structure and blocking the posting accordingly.
Regards,
Eli
Similar Messages
-
Contract Start and End Dates in Sales Order
Hi
I have a situation where a service item is bundled with a deliverable item. The order is as follows
Line Item Mat Qty Higher Level Item
10 Item No.1 (Physical Item) 1
20 Item No.2 (Service Item) 1 10
For the deliverable item 10 , Revenue is recognized immediately. For the Service item no.20 , revenue needs to be recognized over a period of 1 Year (It is a 1 year service contract).
The whole order is created via BAPI from an external 3rd party order capture system.
In order to do revenue recognition properly for service items , SAP I believe has 2 options
1. Based on Billing plan dates
2. Based on contract start dates
Since order with both the line items need to produce 1 invoice, I cannot use billing plan . The only other option is to use contract start and end dates. I have enabled contract data at the sales order level. So when I enter the contract start and end dates manually at the line item level and set the item category to recognize revenue based on contract start and end dates based on time-based revenue recognition it is working fine.
But I need a way to automate the population of contract start and end dates at the line item level. My ABAP guy is not able to find a user exit that can change the XVEDA or any VEDA structure in any of the user exits.
I guess the SAP SD gurus out there would have definitely dealt with a situation of product bundling (Service and non-service items in the same sales order with one billing document , but seperate revenue recognition for service and non-service items)
Please help.
Thnx
SivaHi Siva,
Kindly let me know what criteria you want to give for automatic population of start date of contract...
Standard SAP comes with a few baseline dates for contract start date and we can control this from customization itself.
01 Today's date
02 Contract start date
04 Acceptance date
05 Installation date
06 Date contract signed
07 Billing date/Invoice date
08 CntrctStDate+contract duration
09 Contract end date
If you have some criteria which is not covered here, then let me know and i will try to provide some help then.
Thanks
Kapil Sharma -
Adding a summary column in a table which contains the start and end dates in the week
Hi,
I've got a DIMENSION DATE table and want to add in another column which shows the start and end date of the week.
See below, the new column is WEEKOFYEARTEXT.
Does anybody know how i may generate this column using SQL and using the existing columns?
Umar JavedSee: http://www.sqlusa.com/bestpractices/datetimeconversion/
DECLARE @Year INT = '2015';
WITH cteDays AS (SELECT DayOfYear=Dateadd(dd, number,
CONVERT(DATE, CONVERT(char(4),@Year)+'0101'))
FROM master.dbo.spt_values WHERE type='P'),
CTE AS (SELECT DayOfYear, WeekOfYear=DATEPART(week,DayOfYear)
FROM cteDays WHERE YEAR(DayOfYear)= @YEAR)
SELECT WeekOfYear, StartOfWeek=MIN(DayOfYear), EndOfWeek=MAX(DayOfYear)
FROM CTE GROUP BY WeekOfYear ORDER BY WeekOfYear;
WeekOfYear StartOfWeek EndOfWeek
1 2015-01-01 2015-01-03
2 2015-01-04 2015-01-10
3 2015-01-11 2015-01-17
4 2015-01-18 2015-01-24
5 2015-01-25 2015-01-31
6 2015-02-01 2015-02-07
7 2015-02-08 2015-02-14
8 2015-02-15 2015-02-21
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
SAP CRM Tables and Fields for Contract start and End dates
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Tejacorrection
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi = CRMD_ORDER_I-GUID AND
OBJTYPE_HI = '06'
OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora -
Contract start and end date in BAPI_CONTRACT_CREATEFROMDATA
HI,
I am using BAPI_CONTRACT_CREATEFROMDATA to create a contract from within a custom ABAP program. However I cannot figure out how to get the contract start and end dates into the contract header. I know that you can enter them into the ONTRACT_DATA_IN table parameter but these dates only appear on the line items and not the header.
Does anyone know which parameters on the function map to the contract header start and end dates.
Thanks.Hi,
there are also fields QT_VALID_F and QT_VALID_T for quotation or inquiry. So it looks like for different contract types you need to use different fields. This BAPI calls FM SD_SALESDOCUMENT_CREATE which has subroutine ms_move_header_in which maps from BAPI fields to internal fields. Here is a small part of this routine.
MOVE order_header_in-qt_valid_f TO e_vbakkom-angdt.
MOVE order_header_in-qt_valid_t TO e_vbakkom-bnddt.
MOVE order_header_in-ct_valid_f TO e_vbakkom-guebg.
MOVE order_header_in-ct_valid_t TO e_vbakkom-gueen.
When I check technical fields for the screen fields "Valid from" and "Valid to" in VA43 I get names GUEBG and GUEEN. So it still looks like you should use CT_VALID_F and CT_VALID_T.
I forgot to mention you can still debug BAPI to figure out where the problem is.
Good luck
Edited by: Martin Voros on Sep 11, 2009 9:57 AM -
Report for Validity Start and End Date in PO
Dear All
Is there any report where I can get PO validity start and end date which user input in addtional data header tab of PO?
Regards
Satish KumarHi,
Yes, It is available standard report using T-code ME2N - Purchasing Document (PO) Per Document Number, enter the T-code and provide the following input data's are as follows.
Scope of List : ALV ( for Ms-Excel format report)
Plant : __________ to __________ (if required)
Document Date : ____________ to ___________ (if Required)
Execute the report shown by default in excel format and if required PO validity start and end data, you have to select Change Layout button and open new window options screen right side field option as Validity Per.Start, Validity Period End, Commutative number field data's are selected and click <--- arrow button and then click bottom tick marked button. Now, the report shown your requirement.
Hope, it is useful for you,
Regards,
K.Rajendran -
SNP Planned order start and end dates are not calculated correctly
Hello SNP Guru's
The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
Seems like it should work as standard.
Am i missing something?
Thanks,
MangeshDear Mangesh,
SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
banlance the capacity. What your expected beahavior happens in PPDS planning.
Claire -
URGENT REPORT START AND END DATE
GUYZ help me how to generate a report with start date and end date, two text item or calendar rpresent start and end date, it will generate only the start to end date... plzz put the code guyss..
this is my code when i call my report in runtime only in client server .. i want to generate it wit start and end date but dunno newbie ..
Declare
v_Rep varchar2 (30);
repid report_Object;
begin
repid:=find_report_object('dept');
v_rep:=run_report_object(repid);
end;Check this sample Code..
DECLARE
pl_id ParamList;
pl_name VARCHAR2(10) := 'repdata';
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF Id_Null(pl_id) THEN
pl_id := Create_Parameter_List(pl_name);
Add_Parameter(pl_id, 'P_STARTDATE', TEXT_PARAMETER,:BLK_CTRL.P_TODATE);
Add_Parameter(pl_id, 'P_ENDDATE', TEXT_PARAMETER, :BLK_CTRL.P_CURRENCY);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
ELSE
Destroy_Parameter_List( pl_id );
END IF
RUN_PRODUCT(REPORTS, 'D:\MMRROLDL.RDF' ,SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id ,NULL);
END; -
Calculate Start and End date in Connect By -- When Hirerchy Changes
/* Formatted on 5/20/2013 9:53:00 AM (QP5 v5.115.810.9015) */
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hello , Can some one Please help me or Guide me in calculating Start and End dates for the below logic
I want to calculate the Manager Hirerchy for the given Agent.
Then Below Query is working fine and its giving me the desired results
But when there is a change in the Manager Hirerchy or Manager gets Promoted
Then i need to calculate the start date and end date.
CREATE TABLE PERSON_DTL
SID VARCHAR2(10 BYTE),
EMP_MGRS_ID VARCHAR2(10 BYTE),
START_EFFECTIVE_DT DATE,
END_EFFECTIVE_DT DATE
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M100', 'M107', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M101', 'M102', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('A100', 'M100', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M100', 'M101', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M107', 'M102', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M102', 'M103', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M103', 'M104', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('A101', 'M105', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M105', 'M106', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT CONNECT_BY_ROOT (b.sid) agent_sid,
TRIM (
LEADING ',' FROM SYS_CONNECT_BY_PATH (b.sid, ',')
|| ','
|| b.emp_mgrs_id
PATH,
START_EFFECTIVE_DT Start_dt,
END_EFFECTIVE_DT End_dt
FROM PERSON_DTL b
WHERE CONNECT_BY_ISLEAF = 1
START WITH sid IN ('A101', 'A100')
CONNECT BY PRIOR b.emp_mgrs_id = b.sid
This is the results that i am getting now.
AGENT_SID PATH START_DT END_DT
A100 A100,M100,M101,M102,M103,M104 1/1/2010 12/31/9999
A100 A100,M100,M107,M102,M103,M104 1/1/2010 12/31/9999
A101 A101,M105,M106 1/1/2010 12/31/9999
Results Required
A100 A100,M100,M101,M102,M103,M104 1/1/2010 5/18/2013
A100 A100,M100,M107,M102,M103,M104 5/20/2013 12/31/9999
A101 A101,M105,M106 1/1/2010 12/31/9999May be this..
SQL> select agent_sid,max(path) path,max(start_dt) start_dt,
2 min(end_dt) end_dt
3 from
4 (
5 select agent_sid,path,start_dt,end_dt,
6 sum(flg) over(order by rn) sm
7 from
8 (
9 select agent_sid,
10 path,
11 start_dt,
12 end_dt,rn,
13 case when path like lag(path) over(order by rn)||'%' then 0 else 1 end flg
14 from
15 (
16 SELECT CONNECT_BY_ROOT (b.sid) agent_sid,
17 TRIM (
18 LEADING ',' FROM SYS_CONNECT_BY_PATH (b.sid, ',')
19 || ','
20 || b.emp_mgrs_id
21 )
22 PATH,
23 START_EFFECTIVE_DT Start_dt,
24 END_EFFECTIVE_DT End_dt,rownum rn
25 FROM PERSON_DTL b
26 START WITH sid IN ('A101', 'A100')
27 CONNECT BY PRIOR b.emp_mgrs_id = b.sid
28 )
29 )
30 )
31 group by agent_sid,sm
32 order by agent_sid;
AGENT_SID PATH START_DT END_DT
A100 A100,M100,M101,M102,M103,M104 01-JAN-10 18-MAY-13
A100 A100,M100,M107,M102,M103,M104 20-MAY-13 31-DEC-99
A101 A101,M105,M106 01-JAN-10 31-DEC-99Edited by: jeneesh on May 20, 2013 7:54 PM
Not thoroughly tested.And not sure whether an easy way exists.. -
Make Quarters from Start and End date
Hi,
I have a requirement to make the quarters for fiscal year from the given start and end date.
For example if I have
start date : 01-Jan-09
end date : 31-Dec-09
I have to split it into 4 quarters as bellow:
QTR1 : 01-Jan-09 - 31-Mar-09
QTR2 : 01-Apr-09 - 30-Jun-09
QTR3 : 01-Jul-09 - 30-Sept-09
QTR4 : 01-Oct-09 - 31-Dec-09
plz help.
Regards,
FahimHi,
SQL> SELECT ADD_MONTHS(to_date('01-JAN-2008','DD-MON-YYYY'),(ROWNUM-1)*3) start_dt,(ADD_MONTHS(to_date('01-JAN-2008','DD-MON-YYYY'),ROWNUM*3))-1 End_Date
2 FROM DUAL
3 CONNECT BY ADD_MONTHS(to_date('01-JAN-2008','DD-MON-YYYY'),(LEVEL-1)*3) <=to_date('30-SEP-2009','DD-MON-YYYY');
START_DT END_DATE
01-JAN-08 31-MAR-08
01-APR-08 30-JUN-08
01-JUL-08 30-SEP-08
01-OCT-08 31-DEC-08
01-JAN-09 31-MAR-09
01-APR-09 30-JUN-09
01-JUL-09 30-SEP-09
7 rows selected.
SQL>Cheers, -
BT Broadband Contract Start and End Date
Where can I find my contract start and end date online ?
conrad wrote:
You can, by starting a new order for BB and entering phone no + post code - no need for email address - you then go to choose a package page which shows your current package details at the top of the page
Obviously you don't need to go any further than that page
Conrad, thank you for your suggestion. I gave your suggestion a try but initially got a technical error and then appeared to be getting closer and closer to completing an order without the required information coming up so I chickened out. This also was fraught with difficulty as the cancel button seemed ineffective.
I think I may have to use imjolly suggestions. -
Report execution start and end date/time
Hi All,
How can one find execution start and end date/times for all reports? Basically I am looking to see what reports were run on a day, when and how long it took for each to complete.
Thank you.
DenisHi,
The "eul5_batch_reports" holds the data about the scheduled report and if you don't have any so you will not have any data.
Take a look at "EUL5_QPP_STATS"
for example:
select
qpp.qs_doc_name,
qpp.qs_doc_details,
fu.user_name Ran_by,
qpp.qs_created_date Start_run,
qpp.qs_doc_owner Doc_owner,
qpp.qs_num_rows rows_fetch,
qpp.qs_est_elap_time estimated_time,
qpp.qs_act_elap_time Run_time,
qpp.qs_act_cpu_time Cpu_time
from eul_us.EUL5_QPP_STATS qpp,
fnd_user fu
where substr(qpp.qs_created_by,2,10)=fu.user_id
order by qs_created_date -
Schedule type LineChart with clients and unavailable start and end dates
I have been working on trying to get something in flex which will display a list of clients and their unavailability start and end dates. I have attempted the line chart and the HLOC chart but have not seen success. I do have the H or V grids working fine. But getting the data to display in a line graph based upon start date and end date has been my challenge. any suggestions
Current Code:
<s:Label x="0" y="5" text="Min Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
<mx:DateField id="minDateField"
x="50" y="5"
formatString="MM-DD-YYYY"
selectedDate="{minDate}"
change="minDatefield_changeHandler(event)"/>
<s:Label x="150" y="5" text="Max Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
<mx:DateField id="maxDateField"
x="200" y="5"
formatString="MM-DD-YYYY"
selectedDate="{maxDate}"
change="maxDatefield_changeHandler(event)"/>
<mx:LineChart id="nonAvailsLC" x="0" y="40"
showDataTips="true"
dataProvider="{getNonAvailsResult.lastResult}"
creationComplete="nonAvailsLC_creationCompleteHandler(event)"
width="890" height="550">
<mx:backgroundElements>
<mx:GridLines gridDirection="both"/>
</mx:backgroundElements>
<mx:horizontalAxis>
<mx:DateTimeAxis dataUnits="days" minimum="{minDate}" maximum="{maxDate}"
labelUnits="days"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:CategoryAxis categoryField="user" labelFunction="getName"/>
</mx:verticalAxis>
<mx:series>
<mx:LineSeries xField="startDate" yField="user"
form="horizontal"/>
</mx:series>
</mx:LineChart>I guess I still have lots to learn about Flex and Renderers. I downloaded a Gantt chart with Code and they used the AdvancedDataGrid with renderers and such. I modified the code to work for me. but if I had to create it myself right now, I would be in trouble. Lots more to learn.
-
Hyperion Planning dynamic forms based on start and end date across years
Hi All,
I have a requirement where i need to be able to view a form showing periods across years that are dynamically built depending on the start and end dates. If i have a start date of 01/11/2009 and an end date of 31/7/2013 i want to be able to view a form that shows all of the periods (Jan,Feb etc) in a form that is driven by these dates, in addition it will need to show the actual scenario up to the current month and the forecast from the current month to the end date. So basically if a user inputs the start and end dates the form will display the relevant periods driven by these dates.
Any tips very much appreciated!Hello,
This is difficult to realize, but you can get quite far with a workaround. The first question is, where do you want to input your selection of time periods? Assuming you have a webform with the complete timeline in months and years and you type in the start period and end period.
Webforms have the option to suppress rows and columns.
This can be extended with option of empty cells or not empty cells.
You will need to apply your creativity on this.
Put every month-year combination in a column and add the suppression.
Calculate the timeline between start period and end period with a dummy member, so data exists for these and columns will show.
Maybe you will need to copy the required timeline into a separate version for this, to avoid having periods which were outside the selection and still have data.
I hope these hints help a bit in this challenge.
Regards,
Philip Hulsebosch
www.trexco.nl -
How to determine current period start and end dates
Hi All,
If given previous period start date and end date, how to determine current period start date and end date?
Suppose if given previous period start and end dates are 12/28/08 - 01/30/09, then current period start date and end date will be 01/30/09 - 02/27/09. (where 12 is the previous period, 28 is the day, 08 is the year......)
Can you please suggest an FM to determine the current period dates?
Thanks & Regards
Gowthami>
gowthami karunya wrote:
> If given previous period start date and end date, how to determine current period start date and end date?
> Suppose if given previous period start and end dates are 12/28/08 - 01/30/09, then current period start date and end date will be 01/30/09 - 02/27/09. (where 12 is the previous period, 28 is the day, 08 is the year......)
Hello,
I am assuming you have the Company Code with you & proposing this solution.
TABLES: bkpf.
PARAMETERS:
p_bukrs TYPE bukrs.
SELECT-OPTIONS:
s_date FOR bkpf-budat.
DATA :
l_perio LIKE bkpf-monat,
l_poper TYPE poper,
l_year LIKE bkpf-gjahr,
l_spmon TYPE spmon,
l_periv TYPE periv,
l_date1 TYPE datum,
l_date2 TYPE datum.
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
companycodeid = p_bukrs
posting_date = s_date-high
IMPORTING
fiscal_year = l_year
fiscal_period = l_perio.
CONCATENATE l_year l_perio INTO l_spmon.
* Get the next period
IF l_perio < 12.
l_perio = l_perio + 1.
ELSE.
l_perio = '01'.
l_year = l_year + 1.
ENDIF.
MOVE l_perio TO l_poper.
SELECT SINGLE periv INTO l_periv
FROM t001
WHERE bukrs = p_bukrs.
IF sy-subrc = 0.
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
EXPORTING
i_gjahr = l_year
i_periv = l_periv
i_poper = l_poper
IMPORTING
e_date = l_date1
EXCEPTIONS
input_false = 1
t009_notfound = 2
t009b_notfound = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
i_gjahr = l_year
i_periv = l_periv
i_poper = l_poper
IMPORTING
e_date = l_date2
EXCEPTIONS
input_false = 1
t009_notfound = 2
t009b_notfound = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE: / l_date1, l_date2.
ENDIF.
Maybe you are looking for
-
Error 194 while loading Master Data.
Hi, I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error: RSDMD 194 0MATERIAL: Data record 1('0001003') : Version '1009841' is not vali
-
How to find the list of custom reports?
Hello All, I am trying to get a list of all the custom reports that we have by responsiblity in 11.5.10.2. This to identify and move them into the our newly upgraded R12 instance. Is there a query that can be written against the FND tables to get thi
-
Itunes showing unknown error (-208)
itunes showing unknown error (-208) whenever I try to play anything. Any ideas? Self Designed Mix Windows XP Pro Amd cpu Self Designed Mix Windows XP Pro Amd cpu
-
Select stmt offset - how can I use select stmt to fetch data.
kna1-name2 contains store#XXXXXXX where XXXXXXX is a store number. example : store#3564261. I must fetch this. how can i fetch this ? Can I use WHERE substr(name2,7,10) CS gt_soldto1-store_no or can I use WHERE name2+7(10) CS gt_soldto1-store_no al
-
I hate to ask this because I see at least 5 posts related to this, however I cannot get any of the examples to work except one which does not apply in my case. I am trying to read the file in KM from a MetaData Extension. I cannot read the file using