Installation Question--Wiring for Internet Modem/Router? Help please

Hi all, I am scheduled to have the FIOS TV, internet, and phone installed at the end of this month. I currently have DirecTV HD. I have searched the boards and haven't found a clean answer...wondering if you experts have any advice. My questions are:
1. I do not have a Cable or Cat5 (have telephone line) line run to my office where my computer and current Verizon DSL are.
     ---When the installer comes, will he run a cable line/Cat5 to the office?
     ---Do you need both cable line and Cat5 for the modem/router?
     ---If so, will he fish down the wall (above attic)?
2. Since I currently have DirecTV, I have a multiswitch that distributes all the cable lines throughout the house. The multiswith, however, is in the crawlspace and a good distance from where the current outdoor telephone box is. I don't even have a cable box at the house. So, my questions for this are:
     ---When the installer comes, will he run a cable line from the ONT to the location in the crawspace where all the cable lines converge?
     ---If so, the installer uses a splitter, right?
THANK YOU all so much for any insight. My big concern is that in the office there is not a cable line run, and I don't want the installer to drill through the wall to come to the inside. If I have to fish the wire down the wall from the attic, I want to do so before the install date.
Thanks again for your time.
Solved!
Go to Solution.

Arun covered most of this quite nicely...
1. I do not have a Cable or Cat5 (have telephone line) line run to my office where my computer and current Verizon DSL are.
     ---When the installer comes, will he run a cable line/Cat5 to the office? Yes
     ---Do you need both cable line and Cat5 for the modem/router? No, one or the other works just fine...However if you decide to have the router fed by cat5, then a coax is necessary also to feed ip addresses to the set top boxes...
     ---If so, will he fish down the wall (above attic)?   Maybe, no guarentee's there. If there is an existing Coax in the room already, he may just use that
2. Since I currently have DirecTV, I have a multiswitch that distributes all the cable lines throughout the house. The multiswith, however, is in the crawlspace and a good distance from where the current outdoor telephone box is. I don't even have a cable box at the house. So, my questions for this are:
     ---When the installer comes, will he run a cable line from the ONT to the location in the crawspace where all the cable lines converge? Correct
     ---If so, the installer uses a splitter, right? Correct again. More than likely he shouldn't have to change out any of the coax cables as satellite usually uses the better grade coax.
. My big concern is that in the office there is not a cable line run, and I don't want the installer to drill through the wall to come to the inside. If I have to fish the wire down the wall from the attic, I want to do so before the install date. I would suggest this. That way your guarenteed to have the wires run in the wall.

Similar Messages

Westell 7500 Wireless modem/router help please.

Hi, newbie here
I recently purchased a laptop for the first time in my life and I am trying to connect it to a wireless connection, which I have never done as well. I am using a Westell 7500 modem provided to me by Verizon. I did a bit of researched and apparently (if I'm correct) I don't need a wireless router or any other devices to get wireless internet.
If I am correct, I went to my modem's IP address and turned on wireless. I set up and changed the SSID and enabled a pass phrase, and I connected to the network at the bottom right. It connects, but there is no internet connection. What I mean by this is that it connects to the device successfully, but there is a triangular yellow warning sign with an exclamation mark on my internet bar at the bottom right and in my "Network and Sharing center" it says "no internet access."
Am I doing something wrong or do I need to buy an wireless router? Any help would be appreciated, thanks.

You do not need to buy a wireless router. the 7500 will do the job! I assume you have windows 7. OPen network and sharing center, manage wirleless networks, do you have any entries for your Verizon ISP? If yes delete the entry and go to step 2.
If no go to desktop and press f1 to bring up help - search for (Setp 2) "set up wirless network" and let us know if that works for you. Welcome to the forum
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!

I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!

If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Can't download anything from appstore anymore. Password is correct, internet works. Help, please!

Can't download anything from appstore anymore. Password is correct, internet works. Help, please!

It magicallly works again. But thanks for all efforts.

Can't install win7 scanner driver for canon pixma mp260, help please !!!

can't install win7 scanner driver for canon pixma mp260, help please !!!

HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

I have forgotten my password and misplaced my Installation disc and need to reset password, help please! btw are the intsallation disc unique to each computer or could i borrow a friends?

I have forgotten my password and misplaced my Installation disc and need to reset password, help please! btw are the intsallation disc unique to each computer or could i borrow a friends?

Call Apple to get replacement DVDs > http://support.apple.com/kb/HE57

Download templates for edge animate any help please ?

Download templates for edge animate any help please ?

If you are talking about the templates that Adobe offers, you can find them here:
http://www.adobe.com/devnet/edge-animate/articles/showcase-sample-files.html
Otherwise, a search on web for edge animate templates will probably help.

Want Wired for Internet, Wireless for file transfers on home network

I live in Dubai where internet in my house is connected straight from an ethernet port in the wall in numerous rooms. I have one wired connection hardwired from port to airport extreme which creates a wireless network for my laptops for internet.. apple tv et al. (home network 10.0.1.1 etc)
In the other room i have a mac mini which is directly hardwired to a second ethernet port. I use this machine for hard wired internet as its essentially downloading continuously for work.
Looking at network setting states..
Wired connection states in network details : (To be used purely for hardwired internet)
router address of (91.74.X.1)
and ethernet port ip (91.74.x.21)
Wireless connection states in network details : (To be used purely for connection to home wireless network and streaming of files within internal networks)
Router (10.0.0.1)
IP4V address is (10.0.1.4)
Subset mask is 255.255.255.0
I would like to force the mac mini to only use the wired ethernet connection for surfing/downloading, and also have an IP from the home network (10.0.1.2 etc) purely for file sharing/streaming with other computers on my home network.
Is this possible ?

NAS is the right tool for this job.
It is expensive but the market leaders.. synology and QNAP have really been doing it for long time and the ability to do file store/sharing and most importantly backup in these is excellent. Pick the best you can afford.. and buy disks that are in the recommended list. ie the cheapest are not always the best.. indeed they seldom are.
Plan very carefully for rotation of USB drives (easy and cheap now with 4TB single drives). Rotate backups with offsite location on weekly basis.
I would buy a 4 disk case.. you can use 4x3TB which are the best value at the moment.. that gives you 9TB of storage.. plus redundancy for a dead drive.
Alternatives are using a Mac Mini as a server.. with a large stack of disks on it.. generally should be thinking thunderbolt if you want speed. Hideously expensive though for now.
You can buy an Extreme or TC.. either would work well. TC allows you easy TM backups without using your NAS..
Edit very large files on the computer. ie copy to computer.. edit.. copy back to the NAS.
Editing very large files over wireless.. not good. Multiply that by mutliple computers.. not even fair.
Copy a large project to the computer.. work on it.. copy back to the NAS.. in the meantime Time Machine should be able to take care of incremental backups.
There are heaps and heaps of solutions.. as long as it is logical and easy to you.. and covers what you need.
Don't skimp.. spending a $1000 for a NAS with disks.. plus extra for the backup disks.. that represents how many day's work for you plus anyone you have helping.. $$$$ ????
A mini as a server is a good alternative.. You don't need to run server OS.. but share files to the network. Very hard to build the capacity of the NAS though.
And a Mac Pro is now a joke without internal slots and cages for drives. (nice machine but wrong for this).
And Apple have nothing in between.. a short tower case.. been missing for a long long time.

Airport Extreme and Netgear DGN2200 Modem Router - Help

Hi everyone,
I’m from Italy, sorry for my English. I hope I will explain my problem well enough.
In some weeks I gonna buy my first iMac (after years and years on Win-PCs). For Christmas my family gave me an Airport Extreme for present. This is the first Apple product that comes into my house (..not really an happy entrance until now).
I’m just getting mad about setting this Airport Extreme. I would want to use it as a wireless extender ; I tried almost all possible setups searching for days on the web , but nothing. It doesn’t work. The Apple assistance is always busy in the hours I can be at home and the Extreme still remains a well-done-elegant white brick on the desk..
Situation:
-     I’m working on a Windows PC now (Windows 7)
-     I use a Netgear Modem wireless Router DGN2200 plugged via Ethernet cable to the PC
-     I downloaded Airport utility for windows 5.6.1
-     The Airport Extreme is new (5th generation)
My wish:
-     Using the Airport Extreme in another room of my house connected wirelessly to my existing Netgear router, as an extender of the network
Problems that I found:
-     Wirelessly the base is not found by Airport utility
-     To find the base I have to plug an Ethernet cable from the Netgear Router to a port on the Airport base, but not the first WAN port, I have to use one of the others.
-     When I find the base I try setting-up it with the Bridge Mode, but then it gives errors 6753 or 10057.
-     I tried to change settings on the Netgear Router or reset them, but nothing ..
and so on many tries.
If someone of you had the same Netgear Modem Router (DGN2200) and use an Airport Extreme base like an extender in bridge mode, please tell me what configuration, in the Router Modem and on the Airport base, works fine.
Thank you very much in advance.
Best regards.

I can only create a “New Wireless Network” (no bridge mode) connected to Netgear Modem Router by Ethernet cable , in this way I would have 2 networks, one from the Netgear and another from the Airport, but the source of wireless will be in the same room (because they will be connected together by cable).
I already provided the instructions for this in my post above. Here they are again:
Configure the AirPort to "create a wireless network" using the same wireless network name, same wireless security and same wireless password as the Netgear network....and...configure the AirPort Extreme in Bridge Mode to work correctly on the network.
If you do this, then the AirPort and Netgear devices will work together to act like one "big" network. That is because you have two routers producing the same network.
If I bought 2 Powerline extenders, one connected close to the Netgear Router and the other one connected to power line in the other room,
could I connect by cable the Airport Extreme to the second extender
If you cannot connect an Ethernet cable from the Netgear to the AirPort Extreme, then you might be able to use a pair of Ethernet powerline adapters to send the signal over the AC wiring in your home.
I have not found powerline products to be reliable in general when I have used them, so make sure that you understand the store's return policies in advance if you decide to try them.

Model 7500 Verizon DSL Modem/ Router Help!

I just reformatted my hard drive and reinstalled XP on my desktop cause of a virus. Everything is working fine, but I heard from someone the model 7500 comes with wireless. How do I get that to work? I really want wireless for my laptop also because the local connection around here plain sucks. Can anyone give a detailed guide and/or link to help me set it up?
Thanks
-Reynorigod

#1 Go to http://www22.verizon.com/residentialhelp/
#2 Set your Preference for Internet to DSL, as need be.
#3 Then go to Internet -> Home Networking -> User Guides
#4 Select the user's guide for VersaLink 7500.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

No luck with WRTU54g Router - help please

My brother recently purchased a Linksys WRTU54g router and it came today, we were told that we could connect to the internet through this by connecting to our BTHomehub wirelessly and therefore can then plug an ethernet cable from our xbox 360 into the linksys router and connect to xbox live.
However after hours of trying we have had no luck, any help would be greatfully appreciated.
Thank you.
Danielle.

1. If you already have a Wireless Router then you need to connect your existing router from the Ethernet Port on Internet Port of the LInksys router...
2. Connect a computer to the Ethernet Port of the Linksys Router and open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1...
Leave username blank & in password use admin in lower case...
3. On the set-up tab, change the Router's IP Address to 10.10.10.1 and click Save Settings...Once you are done wait for 30 seconds and unplug the power cable from the router and wait for another 30 seconds and plug it back in...Your router should be configured for Internet Access...
4. You can then connect your xbox to the linksys router and it should work fine...

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

Website layout not good on Internet Explorer 7 - Help please?

I created an html/css website using Dreamweaver CS5. The site layout looks great on almost all browsers except for Internet Exploder 7. It looks like all of the text of the home page is shifted toward the top. In IE7, the header titles of the bottom three boxes; news, renewable energy and success stories are pushed up into the large green content box.
website: http://www.directnuenergy.com/
Does anyone have any suggestions? I will appreciate any advice or tips.
designshop286

Hi,
as Nick said, "I wouldn't worry TOO much about that one". To support that, please have a look to these statistics:
http://gs.statcounter.com/#browser_version-ww-monthly-201003-201103
I think this is tremendously comforting. If you only want to see how the different versions of the IE browser present your side, you can use this link:
http://www.my-debugbar.com/wiki/IETester/HomePage
Otherwise, it's certainly good, if you validate your Web page. To cut it short, you did very well!
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.directnuenergy.com%2F&charset=%28detect +automatically%29&doctype=Inline&group=0
http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.directnuenergy.com%2F&pr ofile=css21&usermedium=all&warning=1&vextwarning=&lang=en
http://validator.w3.org/check?uri=http%3A%2F%2Fjigsaw.w3.org%2Fcss-validator%2Fvalidator%3 Furi%3Dhttp%253A%252F%252Fwww.directnuenergy.com%252F%26profile%3Dcss21%26usermedium%3Dall %26warning%3D1%26vextwarning%3D%26lang%3Den&charset=%28detect+automatically%29&doctype=Inl ine&group=0&user-agent=W3C_Validator%2F1.2
Good luck!
Hans-Guenter

My Ipod Touch won't show up any network names no matter what I do. I have tried to reset the settings, the Ipod and just turn it off for a while. Help please?

Help please? newest Ipod model.

This article may help if wifi is grayed out.
Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there's no address listed for the device

Installation Question--Wiring for Internet Modem/Router? Help please

Similar Messages

Maybe you are looking for