Installation RDBMS Oracle11g Express Edition fails on Windows 7 64bits.

Hi,
I want to install an Oracle11g Express Edition on a Windows 7 64bits.
I have clicked on 'setup.exe' and i have ran this module with the 'Administration Option'.
It's works well but when 'setup.exe' ends, the directory C:\oraclexe\app\oracle\oradata\XE is empty. It doesn't exit any files of the DB: controlfile, redo log, *.dbf, ....
On the file C:\oraclexe\app\oracle\product\11.2.0\cloneDBCreation.log, the error SP2-0640 exists. may be, it's the reason there are no DB file.
Can you help me on that topic. Thanks you your help.
Best regards,
Fréderic

Pl do not post duplicates - Install RDBMS Oracle11g on Windows 7 64 bits unsucessfull - SP2-0640 in cloneDB Creation.log

Similar Messages

Oracle Database 10g Express Edition for Microsoft Windows-port 8080 proble

I have installed Oracle Database 10g Express Edition for Microsoft Windows, it listen to port 8080, where can I change this port ?
Thanks

Inside the database. Search the XE forum for how to do it, it's been done there many times :)
~Jer

BI publisher installation into Oracle Express Edition

Hi,
i need help on BI publisher installation.
When i install BI publisher into oracle Express edition 10.2.1.0 version.
i chosen ADVANCED type it shows Please enter 10.3.1.0 ver or later ORACLE_HOME path...
if i choose BASIC type it shows error at 99% completion of BI screen....
After the EXIT screens, the ORACLE APEX pdf opens but error while opening it.
I want to know whether BI publisher 10.1.3 can support Oracle 10.2.1.0 version or not?
Could anyone Please help on this.
Thanks
Loga..

thanks wobiee,
I have 10g installed on my server machine [windows 2003 -64-bit OS] and Oracle http apache installed and also Oracle Application Express 3.1.0.
I'm trying to install BI Publisher to integrate with Oracle APEX application for rendering PDF report from the application page report region download link,
by following the same url which you replied.
I downloaded and unzipped the files. when i click setup.exe installation started i haven choosen "basic type" it continues and i have given oc4j password and then it gives error at 99% of installation process.
Error log file contains :
Configuration assistant "BI Publisher Configuration Assistant" failed
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
Please review the above error and help me if you have an idea to fix this problem.
-Loga

Is Oracle 10g Express Edition compatible with Windows 2000 advanced Server

I have installed Oracel 10g Express Edition on windows 2000 advanced Server, but it is not working properly, but when i installed it on Windows 2000 Professional, then it is working properly, Does anybody know why this is happening. If anybody know why this is happening, please tell me and also tell me how can i install Oracle10g xe in Windows 2000 advanced server.

There should be no issues. A few possible reasons you are running into problems:
- installation using a domain administrator (it works best using a local admin);
- firewalls or anti-virus software or other port blocking mechanisms;
- DHCP resets;
However, unless you tell us exactly the symptoms we are only guessing.
My car didn't start this morning, but my wife's car did. Can you call me why based on this information?

Unable to start Oracle Database Express Edition (XE) on window 7 - 64 bit

I installed Oracle Database Express Edition (XE) on a WINDOWS 7 - 64 bit machine. I tried "Get Started" and http://localhost:8080/apex. It does not start/connect of anything. Please help.
Thanks.
Debbie

I received the following message from lsnrctl status
and sqlplus / as sysdba.
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2012 17:09
:16
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MW777SXH4ITNY4.dir.svc.a
ccenture.com)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 1004: Unknown error
C:\>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Fri Jul 20 17:10:04 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL> select sysdate from dual
2 /
SYSDATE
20-JUL-12
SQL>
Does this mean I am up and running? I selected from dual. I will continue to play with the DB.
If I download SQL Developer, should the version be for 32-bit or 64-bit for PC - Windows 7 - 64 - bit?
Thanks.
Edited by: 893328 on Jul 20, 2012 2:58 PM
Edited by: 893328 on Jul 20, 2012 2:58 PM

Oracle Database Express Edition - install on WIndows XP laptop

I downloaded the Oracle Database Express Edition to my Lenovo T61 laptop - Windows XP professional, execute the setup.exe and load the software fine. When I press the Finish button on the final dialog, the Oracle Database 11G Express Edition Install Wizard is highlighted in the task bar, as if it is awaiting a response from a prompt. The Oracle Database 11G Express Edition option appears in the Start|Programs with the following sub-options: Backup Database, Restore Database, Start Database, Stop Database, Get Help, Get Started, and Run SQL Command Line.
The Get Started option doesn't seen to do anything. This is the third time I've re-run the setup program, as i thought perhaps the Ad-Aware spyware program was blocking the Finish process.
Any help would be greatly appreciated. Thank you, in advance, for your help.
James

Hello James,
Windows XP professionalI assume you use the 32bit version?
Are you logged in with administrative privileges?
When I press the Finish button on the final dialog, the Oracle Database 11G Express Edition Install Wizard is highlighted in the task bar, as if it is awaiting a response from a prompt.Seems as if it's hanging at that point. Could you check whether the Oracle Services the installer created are up and running? Taking you other comments on "Get Started" into account, I wouldn't think so.
In that case, you should start digging for errors in the log files created during your installation.
-Udo

Installation Oracle database Express Edition

Hi,
I am using windows xp pro platform with a laptop. I have this error when I launch OracleXe application for installation :
Error reading setup initialization file.
Please advice.
Thanks,
Carole,
Montreal, QC

I have seen a few corrupt downloads about a week ago. As Madrid says, this is not a normal message and almost always indicates that the download copy you have is bad.
Did you check the size against the size listed at the downland site?
I got a MD5 "bc9d72a5434b9f831d6f68545a16f2fe" checksum for Oracle Database 10g Express Edition (Universal) = OracleXEUniv.exe (216,933,372 bytes) which successfully installed.

Can I install Oracle Database Express Edition(XE) on Windows 8 (64 bit)

Hi All,
I would like to know whether I can install Oracle Express Edition 11g Release 2 on Windows 8 - 64 bit . Please let me know this is for learning purpose only.

Currently, no Oracle software is certified to be installed on Windows 8. Certified OS versions for 11g XE are documented - http://docs.oracle.com/cd/E17781_01/index.htm
Installing on an unsupported OS may or may not succeed - if the instal succeeds, it is not a indication that the software will work as advertised - any issues you will have to troubleshoot on your own
HTH
Srini

Installation of ODB Express Edition on red hat 5

Hi all,
I know that the XEdition can be installed on RHEL3 and 4, I want to know if it can be installed on RHEL 5.
Thank you!

I don't know if I'll ever install XE on Linux 5, but
I'm interested in knowing if it can work. "lsnrctl
shows BLOCKED" means the instance is started, but not
mounted, did you try to mount it ? e.g.
$ sqlplus / as sysdba
SQL> alter database mount;
result ?It appears that the "oracle-xe configure" script did not build my control files..
-bash-3.1$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 5 08:21:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Express edition and Credential retrieval failed - again

Following a successfull installation of the Express edition, I get the common problems of home page not available and 'credential retrieval failed' when I try to login as the system/sysdba. I have read all the threads I have found and have found no remedies which help. I have also tried the following:
- sqlnet.ora: removing the (NTS) auth. service. This just creates another error message:'Oracle not available'
What more is there to check?
My OS is Windows XP SP3
Re-installation: tried multiple times as local administrator and user with the admin rights - no change.

Well, I am not an expert but, after having installed Oracle XE several times on several platforms, and having experienced some problems, I suspect that you should give a try with WXP SP2 instead of WXP SP3...
Good luck!
Victor

Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
Carlos

My database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help.

Issues during reinstallation Oracle 10g express edition and Forms 6i

I've been racking my head over this issue for the past two three days. Exasperated, I tried searching in the forums but could not find a specific scenario like this.
I am facing issues while trying to get forms 6i to work with oracle 10g Express edition
i have windows XP home edition (installed service pack 2) and installed oracle 10g express edition as well as the oracle 10g express client and SQL developer on the same machine. The database started fine and I was able to use Enterprise manager.
After that I tried installing Forms 6i and whatever i try i am not able to connect to the database from Forms though I was able to connect easily from SQL developer. I used to get the error 12154 "TNS:could not resolve service name"
I dont know if Forms 6i expects the database connector string in some particular format. I searched on the net and found some people solved the issue by reinstalling the database software.
My machine name was complex so I changed it as well and reinstalled the software. Again the DB was fine and connections were fine but no way I could get forms to connect to the DB. All the time
I tried installing Forms to the same folder that Oracle express edition home in the hope that it might fix the problem. That only caused my database to crash. The oracle xe service shows as started but the Enterprise manager link does not work and it seems the database is down. I tried uninstalling and reinstalling client and server to no avail.
Has anyone gone through such a situation and solved this ? Appreciate your help.

The statement about XP Home is correct, but in this case I would say the initial problem (Forms and ORA-12154) is independent of that, it also happens in a supported environment. I think it's the old problem, a second Oracle home was installed, but tnsnames.ora containing the connect informations is located in the first home.
Either tnsnames.ora is copied from to <Second_ORACLE_HOME>\network\admin or the environment variable TNS_ADMIN is set system-wide to <First_ORACLE_HOME>\network\admin.
I think now it's necessary to create a clean machine (remove all Oracle components as explained in the database installation guide for Windows). Then repeat the installation , but XE and Forms 6i in different ORACLE_HOMEs.
Werner

No Http server on port 8080 with 10g Express Edition ( TNS-12631 error)

I downloaded the Oracle 10g Express Edition for Microsoft Windows and tried to install the software on 3 pcs.
2 pc works but mine is not working.
All works well during installation but when I want to connect to the home web page, it displays error (http://127.0.0.1:8080/apex)
It isnormal because I have no process running under 8080 port.
But I don't know why there is not an http server on port 8080.
netstat -a :
Connexions actives
Proto Adresse locale Adresse distante Etat
TCP LABOLLC:epmap LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:microsoft-ds LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1521 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:42510 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1051 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1255 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1291 localhost:1292 ESTABLISHED
TCP LABOLLC:1292 localhost:1291 ESTABLISHED
TCP LABOLLC:netbios-ssn LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1338 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1342 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1355 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1359 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1472 messagerie.castel.fr:epmap TIME_WAIT
TCP LABOLLC:1473 messagerie.castel.fr:1026 TIME_WAIT
UDP LABOLLC:microsoft-ds *:*
UDP LABOLLC:isakmp *:*
UDP LABOLLC:1027 *:*
UDP LABOLLC:1339 *:*
UDP LABOLLC:1340 *:*
UDP LABOLLC:1356 *:*
UDP LABOLLC:1357 *:*
UDP LABOLLC:1427 *:*
UDP LABOLLC:4500 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:1028 *:*
UDP LABOLLC:1062 *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:netbios-ns *:*
UDP LABOLLC:netbios-dgm *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:42508 *:*
The file sqlnet.log contains the following comments :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-MARS -2007 16:28:39
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
I don't know what to do !!
Help

Yes i Check all that.
For example, I have Tomcat installed on my PC and I can launch it easily.
So that means that port 8080 is completly free.
No I haven't http service as you can see with netstat results.
Lokk at the log sqlnet.log, I have following :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-MARS -2007 14:46:35
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Thanks

Oracle Database Configuration Assistant on Oracle Express Edition

I've just installed Oracle 10.2 Express Edition on a Windows XP Professional SP2.
Can anybody please tell me if it is possible to install the Database Configuration Assistant and how to do this? I just found some references about installing ODCA using oracle installer, however this is not available with the Express Edition
thanks
Pietro

DBCA is used to create new databases under the software of an existing home, or to add and remove features with a database.
Oracle Database 10g Express Edition software does not permit multiple databases (it only allows SID XE) nor does it permit adding or removing features. SO DBCA is not useful, not required - or included - with XE.
What are you trying to accomplish? (Multiple databases ALA SQL Server sense are done by separate Schema's in Oracle)

Installation RDBMS Oracle11g Express Edition fails on Windows 7 64bits.

Similar Messages

Maybe you are looking for