Installation SAP 4.7 Enterprise Win2003 x64  with DB6 LUW 9.1

Hello ,
is it possible to install SAP 4.7 Enterprise with DB6 LUW 9.1 on Windows 2003 x64.
or must i take DB6 UDB V8 like in the Installation Guide.
Thanks
Uwe Visel

Hello,
i've been checked the PAM (Product Availability Matrix) on service.sap.com. It shows me that DB6 LUW 9.1 on Windows 2003 x64 is supported with 4.7 Enterprise.
On service.sap.com/instguides i only find the Installation Guide for DB6 UDB 8.1. But i have searched a little bit more and i found a SAP Note 967555.
This is the note i've been searched for. You can install SAP 4.7 Enterprise with DB6 UDB 8.1 / DB6 LUW 9.1 / DB6 LUW 9.5.
Thanks a lot for your fast help.
Uwe Visel
P.S. I've changed my name SAP Basis to the my real name

Similar Messages

  • 10g Express Edition on Windows 2008 Enterprise R2 x64 with Active Directory

    I have successfully installed the 10g Express Edition on Windows 2008 Ent. r2 x64 with Microsoft Active Directory Domain Controller but i could not be able to run http://127.0.0.1:8080/apex
    Although i have run the http://127.0.0.1:8080/apex on my another Windows 2008 R2 x64 ant WITHOUT Active Directory Domain Controller Role.
    i think its related with AD Domain server role of my server, because i run that on same config and operation without Active Directory Domain Controller role.
    Can anyone help about this issue?
    thanks in advance

    I have experienced the same problem - running 10g Express on a Win 2008 (32-bit). When not being a Domain controller, the install was fine. When installing after the server had been given the Domain Controller role (+the required DNS), it failed. NO FIREWALLS are involved on the server. Seems like Oracle Express has problems being installed in this kind of environment - independent of x32 or x64 bit OS.
    Edited by: 811504 on Nov 17, 2010 11:44 PM

  • HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7

    Hi all,
    I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
    In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
    My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
    What can be the solution ..?
    Thanks,
    Chandresh Pranami.

    Hi Chandresh,
    Try executing sapinst with virtual hostname.
    eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
    This should work.
    -Pinkle

  • Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00

    Hello,
    We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
    As we checked we have activate the extension set:
    EA-FIN: Financials Extension
    EA-FS: Financial Services
    According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
    In the other OSS note 858966 mentions the following conditions to start points migration:
    1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
    R/3 Enterprise extension set 1.10 or earlier.
    2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
    R/3 Enterprise extension set 2.00 or higher.
    Do you know a transaction o report Sap which provides this information?
    Thank in advance.
    Sergio

    Within SAP, select System -> Status...  In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information.  It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN.  The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
    Regards,
    Shannon

  • Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

    Dear SAP,
    We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
    "The start release configuration :
    SAP_ABA  :620
    SAP_APPL :470
    SAP_BASIS :620
    SAP_HR:470.....is not supported "
    At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
    we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
    I request team SAP to help us in this regard.Expecting your reply ASAP.
    Thanks and  Regards
    Anantha Raman E.

    Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
    Thanks,
    Barry Keating

  • Installation of SAP Netweaver 7.0 with SAP R/3 Enterprise 4.70 backend

    Hello everybody,
    I need to install an SAP Netweaver 7.0 environment for a client who is currently using SAP R/3 Enterprise 4.70. However, I couldn't find any document about the compatibility of the two.
    Does anybody know if it is possible to connect these versions of Netweaver and R/3?
    Could you please tell me where I could get some documentation about it (for example : intallation guide of netweaver with SAP R/3 4.7 or docs about netweaver and R/3 4.7 connectivity) ?
    Thank you.
    Stan

    OK thanks.
    The final need is to be able to create purchase requisitions or purchase orders in the enterprise portal with a simplified user interface for users who are not used to working with SAP and don't have the SAP client installed on their computer.
    So they will use their web browser to connect to the portal and create the requisition for example. Then we wan't the data to be stored in the R/3 backend et other users will validate the requisition and deal with the rest of the process.
    The second step will be to study the benefits we could get from installing Adobe document services and creating an adobe interactive form to simplify even more the user interface. The users would then fill the data for the purchase order or requisition directly in the form that looks like the form they get when printing.
    I saw that we have to install the "R/3Plug-In 2004.1" in the backend to use our SAP 4.7 as a data source for the Portal.
    Do you know if there are other steps to perform in the backend before we link it to the portal ?
    Thank you
    Stan

  • We looking for sap xi installation in our office, how to approach with SAP

    we looking for sap xi installation in our office, how to approach with SAP Services.
    What are the uses of SAP Netweaver Platform Integration,can you give me the details of this and , from where  i can  get this one.
    And what are the components i need to buy ,plz any one of you send it to me.
    Thanks & Regards,
    priya reddy

    Hi barry,
    Thank you very much for u r  reply
    Thanks & Regards,
    priya reddy

  • Installation problems with SAP Web AS 6.20 came with Official ABAP Ref

    Can anyone help.
    Purchased ref books with SAP WAS 6.20
    I have followed the instructions for installation and everything goes ok up until 41%.
    Installation of SAP DB server finished succesfully.
    When I check the technical info on SAP Press where I bought the books it say's at 42% change disks and continue. As I'm as near to that as possible then I did just that, but when I press the next button nothings happens.
    What does happen is that a new window appears with the folders from the disk in the drive, as though I'm supposed to select something; but what.
    I am using xp home edition, with plenty of memory and plenty of hard disk.
    Also created the Loopback Adapter but not sure if this needs configuring or what.
    This is driving me mad especially as it means me cleaning all reference to sap from my hard drive along with entries in the registry.
    The instructions to be honest are as bad as the minsap that came with ABAP Objects and which I had no success with.
    I would have thought buying these books, that all these issues would have been sorted out, but obviously I was wrong.
    Why produce such great reference books and ruin it with software that doesn't work.
    Any help would be much appreciated.

    Hi Peter,
    Whereas I take your point. You are not telling me something that I don't already know.
    Time is of the essence and time is something I don't have.
    I am very busy and work in Switzerland 5 days a week and don't have any free time whatsoever. I travel back to the UK at the weekend for 1 day, so wasting time is not something I relish. End of moan!
    I thought that these forums were there to help ?
    I need to be spending valuable time on the product and not the  installation.
    You may, like others have a lot of spare time on your hands. I don't.
    If the damn instructions were correct in the first place then people wouldn't be having these sorts of issues.
    I am amazed at the number of installation issues there are and everyone appears to be different.
    Obviously SAP have cornered the market because when you're in you can't get out.
    I know quite a few people who work in SAP, and alI I hear is, we should not have gone for this ERP solution. That its over complicated (obviously for a reason), its slow and when you have problems its a nightmare to trace back to where the problem initially came from.

  • Installation of sap ecc6.0 sr3 on Aix with DB2.

    Hello Everyone
    Pleaese suggest the file system size which is to created before installation of sap ecc6.0 sr3 on Aix with DB2.
    Thanks

    /usr/sap/trans
    /usr/sap/<SID>
    /db2/<SID>/sapdata1
    /db2/<SID>/sapdata2
    /db2/<SID>/sapdata3
    /db2/<SID>/sapdata4
    /db2/<SID>/log_dir
    /db2/<SID>/log"_archive

  • SAP R/3 Enterprise (4.7) installation.

    Hi,
    how many GB of disk space are required to install SAP R/3 Enterprise (4.7) ?
    Yours faithfully

    Hi,
    It will be approximately around 70GB.
    Regards,
    sam

  • Add sap R/3 enterprise system in solution manager SLD

    Dear All
    Required solution manager configuration documents.
    We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
    And during the installation of solution manager I select u201CConfigure a Local SLD u201C
    Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
    Who to Configure SLD Bridge ( in SLD Server ) ?
    in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
    and how to Verify that my system is connected and working fine With SLD
    Please help me regarding u201C configuration solution manager u201C
    Regards
    Shahid

    Hi
    Visit for step by step details of Standard Configuration of Basic Settings
    http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
    http://www.wilsonmar.com/sap_solution_manager.htm
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    Regards
    Uday

  • SAP R/3 ENTERPRISE 47X200 IDES Version - Download Titles

    Hi
    Could any one please list out all required Download Titles for SAP R/3 ENTERPRISE 47X200 IDES Version.
    Operating System : Microsoft Windows Server 2003 Enterprise Edition with SP1
    RDBMS               : Oracle 9.0
    Will appreciate install instructions as well . (e-mail : [email protected])
    Thanks in Advance
    Veeresh Babu

    cds you'll need...
    - Oracle 9.2 NT 1/3 - Oracle 9.2 NT 3/3 (or appropriate DVDs)
    - Oracle 9.2 Patch Set 7 WIN I386 32Bit/64bit
    - DVD IDES SAP R3E 4.7x2.00 SR1 Export (4) 1 of 16 - 16 of 16
    - Installation Master 6.20/6.40 Windows Server on IA32 32bit/64bit
    - CD 6.40 Kernel ORACLE A,L,NT,NT/IA64
    - SAP NW04 SR1 IGS
    use the master cd/dvd to invoke <b>sapinst</b> and follow the instructions (plz check on any new cds as 47x200SR1 runs on kernel 6.40 there might be newer instructions found in sapnet!); oracle must be installed before starting sapinst...after that install the central instance followed by the database instance installation. the ides installation differs only slightly from a "normal" installation...just use the appropriate ides export cd/dvd...
    plz read the installation guide and the relevant sapnotes carefully!!!
    GreetZ, AH

  • Duet Enterprise 1.0 with CRM Sales Management

    Hello,
    we heard that Duet E 1.0 with sp2 with Business Packs releasing in June 2011.
    1. Any idea when Duet Enterprise BP1 will release  ?
    2.  is CRM Sales Management and Oppertunity Management is covered in this
    3. before implimenting bp1 do we have to impliment duet enterprise 1.0 with sp2.
    4. Can we directly integrate CRM and SharePoint 2010 with duet E.
    Regards,
    Shashank

    Hi Shashank,
    1. Any idea when Duet Enterprise BP1 will release ?
    The plan is to release BP1 (or Feature Pack 1 as it is called) in Q3/Q4. The nomination for the Ramp-up has started. If you are interested you can apply via the [Online Scoping|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000715662&]. Enter your customer data and select "Feature Pack 1 for Duet Enterprise 1.0 " in the next step.
    2. is CRM Sales Management and Oppertunity Management is covered in this
    Feature Pack 1 will cover some contact-based scenarios of CRM.
    3. before implimenting bp1 do we have to impliment duet enterprise 1.0 with sp2.
    You can start with Duet Enterprise 1.0 SP02 right now and later update to Feature Pack 1 (by this you will already have done some mandatory steps like setting up the trust between the SharePoint and the SAP system already). If you do not want to start now, you can also wait for Feature Pack 1 and then start a fresh installation.
    4. Can we directly integrate CRM and SharePoint 2010 with duet E.
    There will not be a "full-out-of-the-box-scenario" for CRM integration in SharePoint. However, the focus is much more on providing building blocks that makes the integration of CRM simpler and faster.
    Regards,
    Holger.

  • IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

    Dear all,
    we are just trying to install IDES 4.7:
    IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
    But the installation break with error Message:
    Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
    MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
    FJs-00012 Error when excuting script....
    Any experience or help from your side?
    Thanks in advance
    HanseAtik

    Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
    adn execute "R3trans -d"  Tell what result .
    About documentation read -->
    service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
    in left corner chek your release like :
    "SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
    After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
    Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
    Regards.
    Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

  • Installation SAP Sneak Preview 7.0 EhP1 fails.

    Hi all,
    I want to install SAP Sneak Preview 7.0 EhP1, with the new WD4A features. I already had one installation that failed. Therefore, the official uninstall was not yet present in c:\sap\nsp\uninstall. So I had to delete all files and folders manually. I also used the registry cleaning tool, checked the host file and services file. But still, when trying to (re)install it, on the first check of the installation wizard, I keeps giving me the error, that there is already an NSP system running /installed, which in fact is not (no longer) true. What else should I do to overcome this error?
    Kind regards,
    Micky.
    BTW. I already posted this question on other forum, but still no replies. Hope I have better luck here.

    This is not an appropriate forum for the posting of questions about the Sneak Preview installation.  There is a dedicated forum for such questions.

Maybe you are looking for