Installation SAP Sneak Preview 7.0 EhP1 fails.
Hi all,
I want to install SAP Sneak Preview 7.0 EhP1, with the new WD4A features. I already had one installation that failed. Therefore, the official uninstall was not yet present in c:\sap\nsp\uninstall. So I had to delete all files and folders manually. I also used the registry cleaning tool, checked the host file and services file. But still, when trying to (re)install it, on the first check of the installation wizard, I keeps giving me the error, that there is already an NSP system running /installed, which in fact is not (no longer) true. What else should I do to overcome this error?
Kind regards,
Micky.
BTW. I already posted this question on other forum, but still no replies. Hope I have better luck here.
This is not an appropriate forum for the posting of questions about the Sneak Preview installation. There is a dedicated forum for such questions.
Similar Messages
-
Installation SAP Sneak Preview and Mini WAS 6.20 on the same computer?
Hi together,
I'm runnig the SAP Mini WAS 6.20 on my computer. Can anybody tell me, whether it is possible to install the 'SAP Sneak Preview ABAP full edition' at the same computer?
Or will that cause problems?
Thank you for your help!
EvaEva,
this is not a problem, goahead with the installation.
Make sure you met all the installation prerequisites.
Thanks
Sarath. -
SAP sneak preview installation error reg MaxDB
Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rteHi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas -
Could not download SAP Sneak Preview - Java
Anyone managed to download SAP Sneak Preview - Java Edition recently? I can't dwnload it. Pls help.
Rgds,
Hapizorr Rozi AliasRenald
Following path Downloads -> Web AS -> New! Sneak Preview -> Download file 1 ,
1.If simply click the Download 1 link ,it throws open another page with the FTP url appended but gives a Page cannot be displayed message then.
2.If on a right click I do a Save Target As..... then it returns an error saying that
Internet Explorer cannot download...akPrevJavaSPI11.part1.rar&df=0 from www.sdn.sap.com. The server returned extended information
Is there any other alternative or else what can be the problem? -
Webdynpro doesn't start after installation of Sneak Preview SAP NetWeaver
Hi,
I have just installed the Sneak Preview SAP NetWeaver 2004. In the sap console I see that all the processes have successfully started.
However when I try to open the WebDynpro content administrator via browser at http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
An error has occurred:
"Failed to process the request."
Error stacktrace:
java.util.MissingResourceException: Can't find bundle for base name com.sap.tc.webdynpro.clientimpl.resourcesTranslated.MessageBundle, locale is
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:839)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:729)
Can anyone help me track down this problem.
VardiHello Stefan,
I'm sorry but I get an internal error:
PluginName: Web Dynpro Model Editor Services
Plugin ID: com.sap.ide.webdynpro.service.modeleditor
Class: com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog
Method: nextPressed
Message: Internal error - see detail information in exception trace.
Exception: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
It seem's I have a fundamental error in my installation.
Do you know a solution for the problem.
Again, thank you for your help.
Best regards
Manfred -
NW04s full version Sneak Preview (java): License check failed
I've seen similar posts, but not exactly the same thing.
I installed the Sneak Preview Full Edition (Java), and finally installed it today. It shuts down after 30 minutes with an error from jcontrol.exe - the license check has failed.
It's not an expired license (I just downloaded it this week, and installed it today).
I've seen several posts related to using the Visual Administrator to manipulate licenses, but I haven't seen how to start this tool - there are no instructions I've found that are any more detailed than "start the Visual Administrator".
I feel like I'm almost getting it. Can anybody provide me that missing link?Finally got it going properly.
I adjusted my system clock to fall between the licence dates found in Visual Administrator and restarted the system.
It didn't work.
I uninstalled the sneak preview edition,
Set the system clock to 15/Dec/2005,
Reinstalled the the sneak preview edition.
It did worked this time.
I was surprised by the licence dates in Visual Administrator.This time that the start date was set properly from 15/Dec/2005 to expire on 15/Mar/2006.
However in the first installation,the licence dates are
from Nov/05 to May/06 which is 6 months.
This time i got the licence from Dec/05 to Mar/06 which is 3 months.
I observed 2 differences between these 2 installations.
1) After my first installation, while the jcontrol.exe is still starting some processes, I tried to login to VA couple of times unsuccessfully. In my next attempt to login to VA, it asked me to change my password and I did change it from abcd1234 to something else.
When I changed my password, may be jControl.exe didn't pick it up instantly and tried to use some services using the old password which might have caused the problem.
2) In my second installation, I changed my system date to 15/Dec/2005.So.. to prevent any sort of automatic date synchronization, I've disconnected the internet connection.
This time the installation date was taken into consideration by the installer to create the licence.
It is still a mystery to me why the licence date was set to some old dates in my first install. -
Problems with Installation of Sneak Preview Netweaver 2004s
Hello all,
while installing the Sneak Preview of
Netweaver 2004s I get the following errors right
at the beginning.
WARNING 2006-01-30 10:40:51
Unable to get the name of a domain controller for domain SAP_ALL.
ERROR 2006-01-30 10:40:53
FSL-01027 Account user="SAP_ALL\<MY-D-USER>" does not exist.
ERROR 2006-01-30 10:40:53
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-01-30 10:40:53
FCO-00011 The step AddPrivileges with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0|AddPrivileges was executed with status ERROR .
Any idea what could cause this error ?
My user has adminstrator priviliges.
Thank you in advance,
AxelI also have encountered a very similar, if not the exact same error.
INFO[E] 2006-03-03 15:12:01
FSL-01027 Account user="COMP-phtBA0\SAPServiceNSP" does not exist.
ERROR 2006-03-03 15:12:11
FSL-01002 Unable to create account COMP-phtBA0\SAPServiceNSP. HRESULT=0x80005009
ERROR 2006-03-03 15:12:11
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-03-03 15:12:11
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
I am installing on local, not on a domain. Any more specific ideas on the cause and remedy? A work just a few cubes down has installed it without any problems.
Thanks,
David -
Problems in the installation the sneak preview sap NetWeaver 04s-full ABAP
hello to all!!!!!!!
I have problems in phase 24 of the installation.The message of log is the following one:
ERROR 2006-03-25 17:33:28
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
ERROR 2006-03-25 17:33:29
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2006-03-25 17:33:29
FCO-00011 The step createIGSDestination with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|13|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|createIGSDestination was executed with status ERROR .
Somebody can help me to solve this problem. Asi I can of a good time learn abap!!!!!
thanks!!!!!!Hi,
Is the error in the phase "Change default passwords"?
Have you tried restarting the SAPInst? If the restart
doesn't help, please try to get a newer version of SAPInst
and continue. Note 929929 might help.
Regards
Srikishan -
Error during Installing SAP Netweaver 7.0 SR3 Sneak Preview
Hi All,
I am trying to install the SAP Sneak Preview currently available in the SDN.
There are 40 steps involved in the process and i am able to get through 39 steps successfully.
On the 40th step, (Install minimal configuration), it tries to start the J2E instance.
This fails. The SDM and dispatcher load sucessfully, however the Server 0 fails to load giving -2 exitcode and below is the developer trace.
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 3196] JLaunchIAbortJava: abort hook is called
[Thr 3196] **********************************************************************
ERROR => The Java VM aborted unexpectedly.
Please see SAP Note 943602 , section 'Java VM crashes'
for additional information and trouble shooting.
[Thr 3196] JLaunchCloseProgram: good bye (exitcode = -2)
I have tried varying the -Xms and -Xmx properties, but still fails.
Could you please help me fix the same.
Regards,
Tanveer.Hello Tanveer.
Please mark this thread as aswered.
And If u found my reply useful then please reward points.
Cheers
Shailesh Mamidwar -
SAP NetWeaver Composition Environment Sneak Preview
Hi,
By installing the SAP NetWeaver Composition Environment Sneak Preview - Java EE along with SAP Sneak Preview ABAP stack can I make use of the new BI 7 features like IP, report designer...
Thanks,
samHi,
So, the download is done. But now I have a problem with the installation. I couldn't find any post explaining the same problem. My installation ends with message: The installatin of SAP NetWeaver CE 7.1 is finished, but some serious errors occured during the install. Please see the installation log C:\usr\sap\CE1\insthome\primaryApplicationServer\work\install.log for details.
the installation log contains among other things following lines:
Jun 19, 2007 11:33:19 AM [Info]: Start PREPARE_AUTOSTART_DB [com.sap.xpf.controller.StepLibraryExecutionStep]
Jun 19, 2007 11:33:19 AM [Info]: at: 2007.06.19 - 11.33.19[yyyy.MM.dd - HH.mm.ss]
Jun 19, 2007 11:33:19 AM [Info]: execute step setSDBAutoStart
Jun 19, 2007 11:33:19 AM [Info]: setACLWin on WIN with null(WIN MAX)
Jun 19, 2007 11:33:19 AM [Info]: execute task setACLWin
Jun 19, 2007 11:33:19 AM [Info]: TASKENGINE: execute task setACLWin
Jun 19, 2007 11:33:19 AM [Info]: looking for method setPermission
Jun 19, 2007 11:33:19 AM [Info]: looking for method setNode
Jun 19, 2007 11:33:19 AM [Info]: looking for method setGroup
Jun 19, 2007 11:33:19 AM [Info]: set full controll for group LOCAL SERVICE on C:\sapdb\data\wrk
Jun 19, 2007 11:33:42 AM [Info]: End PREPARE_AUTOSTART_DB [com.sap.xpf.controller.StepLibraryExecutionStep]
Jun 19, 2007 11:33:42 AM [Info]: rc: 1
Jun 19, 2007 11:33:42 AM [Info]: at: 2007.06.19 - 11.33.42[yyyy.MM.dd - HH.mm.ss]
Jun 19, 2007 11:33:42 AM [Info]: duration: 00:00:22[HH:mm:ss]
Jun 19, 2007 11:33:42 AM [Info]:
Jun 19, 2007 11:33:42 AM [Info]: Error during executing
Jun 19, 2007 11:33:42 AM [Info]: End Controller
Jun 19, 2007 11:33:42 AM [Info]: at : 2007.06.19 - 11.33.42[yyyy.MM.dd - HH.mm.ss]
Jun 19, 2007 11:33:42 AM [Info]: durationt : 00:02:33[HH:mm:ss]
Jun 19, 2007 11:33:42 AM [Info]: status : ERROR
How can I handle this error message.
Thanks!
Mehmet
Message was edited by:
Mehmet Pamukci -
Sap net Weaver Sneak preview edition installation Fails.
Hi all,
I couldn't finish the installation for SAP NetWeaver sneak preview installation.
Installation failed in the IMPORT ABAP step.
I have many Import package Errors .
All the packages (18) SAPSSEXC, SAPAPPL1, SAPAPPL0, SAPSDIC... end up with errors.
I have no idea Why.
Log file is of no help to me.
I have tried it several times already .
But I am still stopped with the same error.
Thanks if you have already experienced this pb .
OS is Windows XP SP1 .
Regards
YvonHi All,
We had the same problem when we installed Solution Manager 7.0, Oracle 10.2 and j2sdk 1.4.2_12.
The problem was oracle was not running. We have to run oracle manually in command prompt.
This is how when we resolved and worked fine. Follow these steps in command prompt.
1. Check R3trans -d; If R3 finished with error(0012) follow the below steps.
1.1 Check services.msc whether oracle listeners are started or not; if not please start.
2. Go to oracle drive.
Use the following commands:
3. sqlplus /nolog
4. connect /as sysdba
5. If result displays:
"SQL> connect /as sysdba
Connected to an idle instance.
6. Use this command next: archive log list (i.e, SQL> archive log list)
ORA-01034: ORACLE not available" - If this is the result, then startup the oracle.
7. Use this command next: startup (i.e, SQL> startup)
Then result should say: "ORACLE instance started."
That means oracle instance is started successfully.
Now, Retry the step where you left. It will work fine.
Please let us know if you need any further details need.
I know this thread was initiated long time back; but i want to share our experience with you. It may be helpful to someone later who encounters these kind of issues.
Thanks and Regards,
Sanjai Prabu Govindan -
SAP NW CE 7.1 EHP1 NWDS Preview Version Installation issue
I am running into follow error message when trying to install NWDS of SAP NW CE 7.1 EHP1 Preview Version
Error Message:
Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors
Error Details:
Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors.
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Before error message is displayed, I get Windows Pop message with Windows Installer message as below:
Windows ® Installer. V 3.01.4000.1823
msiexec /Option
Install Options
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
- Log all information, except for v and x options
/log
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
Please advice?
Best regards,
SridharHi,
Although I have not encountered this error in my installation copy - you can try the following:
Take the zip file for NWDS to another machine and install it. If you do get the same error - then the zip file was damanged in the transfer - if not then probably it is an issue with the Microsoft Installer files that you are using. If you are using a legal version of Windows then upgrade to the latest updates and then try again. You can try the same steps after shutting down and restarting your PC.
Most probably the zip file is damaged since the MSI has run successfully.for the CE WAS.
p256960. -
Trouble with installation Sneak Preview SAP NetWeaver 2004s
Hello,
the installation of the Sneak Preview SAP NetWeaver 2004s fails at step 3 with the following error:
ERROR 2006-02-27 16:24:27
FSL-01001 Unable to check existence of account nadine\SAPServiceNSP. Der Arbeitsstationsdienst wurde nicht gestartet.
ERROR 2006-02-27 16:24:27
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-02-27 16:24:27
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
I've checked following points:
- OS: Windows XP Professional
- Loopback adapter is installed and working
- hosts file contains correct IP-address
- the groups SAP_NSP_LocalAdmin and SAP_NSP_GlobalAdmin were created in step 3
- I can create the accounts nspadm and SAPServiceNSP by hand (with the same user!) and the installation continues but I ran into further errors in step 4.
Who can help?
Regards StefanHi , thanks for your hints .
I am thru .
What I did : create manually the user nspadm and NSPServiceAdm under Windows user.
pb was, as it is a company computer, we also have policies about what to put in passwords (capital letter, special caracters etc ...)
Now I'll see until which step I can go.
Cheers -
SAP NW sneak preview install fails due to error on util_connect
I am attempting to install netweaver sneak preview 2004s on a windows server. When I get to the MaxDB database installation step, the install fails and the following data is in the XCMDOUT.LOG log file:
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n erp-2 -d J2E -u CONTROL,********
Execute Session Command : util_connect
Execute Session Command : exit
ERR
-24988,ERR_SQL: sql error
1,could not create comm. shared memory [5]
I get the same error when I attempt to provide the command util_connect manually as well.
Please let me know if you can provide any advice on fixing this issue.
Thanks,
MarkHi,
if you're installing on the target machine using a Windows Terminal Service (WTS) connection, then the reason for your issue should be explained in note 688028.
Please let me know if you can access that OSS note, if you don't have OSS, I can send you the relevant information.
Kind regards,
Roland -
Installation Error SAP Netweaver 04s Full Abap ed. Sneak Preview
Hello i get an error when installing the trialversion of SAP Netweaver 04s Full Abap ed. Sneak Preview. Here is the error.
ERROR 2006-03-17 08:37:43
The dbmcli call for action ACTIVATE failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-03-17 08:37:43
The dbmcli call for action ACTIVATE failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-03-17 08:37:43
FCO-00011 The step sdb_instance_activate with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|2|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_instance_activate was executed with status ERROR .
I tried to retry this step and also tried to install the application again. Also there is no XCMDOUT.LOG. Can anybody help me?Hello and sorry for this late answer, but i always change between school and company.
So here is the KNLDIAG:
Date Time TID(hex) Typ MsgID Label Message-Text
2006-03-20 09:33:01 0xE88 19705 CONNECT Loading default TCPIP-DLL, ( 'sqltcp.dll')
2006-03-20 09:33:01 0xE88 19707 CONNECT WINSOCK: 2.0, SQLTCP-DLL: 7.6.0
2006-03-20 09:33:01 0xE88 20233 RTE Dump of all kernel parameters start
2006-03-20 09:33:01 0xE88 20206 RTE Using mode NORMAL for data volume 1
2006-03-20 09:33:01 0xE88 20234 RTE ADMIN=1
2006-03-20 09:33:01 0xE88 20234 RTE _AK_DUMP_ALLOWED=YES
2006-03-20 09:33:01 0xE88 20234 RTE ALLOW_MULTIPLE_SERVERTASK_UKTS=NO
2006-03-20 09:33:01 0xE88 20234 RTE AUTHENTICATION_ALLOW=
2006-03-20 09:33:01 0xE88 20234 RTE AUTHENTICATION_DENY=
2006-03-20 09:33:01 0xE88 20234 RTE AUTOSAVE=1
2006-03-20 09:33:01 0xE88 20234 RTE AUTO_RECREATE_BAD_INDEXES=NO
2006-03-20 09:33:01 0xE88 20234 RTE BACKUPRESULT=1
2006-03-20 09:33:01 0xE88 20234 RTE BACKUP_BLOCK_CNT=8
2006-03-20 09:33:01 0xE88 20234 RTE _BACKUP_HISTFILE=dbm.knl
2006-03-20 09:33:01 0xE88 20234 RTE _BACKUP_MED_DEF=dbm.mdf
2006-03-20 09:33:01 0xE88 20234 RTE CACHE_SIZE=12800
2006-03-20 09:33:01 0xE88 20234 RTE CALLSTACKLEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE _CAT_CACHE_MINSIZE=262144
2006-03-20 09:33:01 0xE88 20234 RTE CAT_CACHE_SUPPLY=3000
2006-03-20 09:33:01 0xE88 20234 RTE CHECKDATA=1
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_BACKUP=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_COMMON=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_CONVERTER=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_DATACACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_DATAPAGELOG=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_FBM=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_IOMAN=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_KB_REGIONS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOCK_SUPPLY=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOCK=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGHISTORY=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGPAGE=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGTRANS=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGVOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_REGIONS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_SRVTASKS=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TABLE_WIDTH=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TASK_SPECIFIC_CATALOGCACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TRANSLIST=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TREE_LOCKS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CLUSTERED_IO=NO
2006-03-20 09:33:01 0xE88 20234 RTE COLUMNCOMPRESSION=YES
2006-03-20 09:33:01 0xE88 20234 RTE _COMMENT=
2006-03-20 09:33:01 0xE88 20234 RTE CONTROLPASSWORD=***
2006-03-20 09:33:01 0xE88 20234 RTE CONTROLUSERID=CONTROL
2006-03-20 09:33:01 0xE88 20234 RTE CONVERTER_REGIONS=8
2006-03-20 09:33:01 0xE88 20234 RTE DATABASEFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE _DATA_CACHE_RGNS=16
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_GROUPS=1
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_MODE_0001=NORMAL
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_NAME_0001=D:\DISKD0001
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_SIZE_0001=1036672
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_TYPE_0001=F
2006-03-20 09:33:01 0xE88 20234 RTE DATE_TIME_FORMAT=INTERNAL
2006-03-20 09:33:01 0xE88 20234 RTE DBFILLINGABOVELIMIT=70L80M85M90H95H96H97H98H99H
2006-03-20 09:33:01 0xE88 20234 RTE DBFILLINGBELOWLIMIT=70L80L85L90L95L
2006-03-20 09:33:01 0xE88 20234 RTE DDLTRIGGER=YES
2006-03-20 09:33:01 0xE88 20234 RTE DEADLOCK_DETECTION=4
2006-03-20 09:33:01 0xE88 20234 RTE DEFAULT_CODE=ASCII
2006-03-20 09:33:01 0xE88 20234 RTE _DELAY_COMMIT=NO
2006-03-20 09:33:01 0xE88 20234 RTE _DELAY_LOGWRITER=0
2006-03-20 09:33:01 0xE88 20234 RTE DIAG_HISTORY_NUM=2
2006-03-20 09:33:01 0xE88 20234 RTE DIAG_HISTORY_PATH=d:sapdbdatawrkNSPDIAGHISTORY
2006-03-20 09:33:01 0xE88 20234 RTE _DIAG_SEM=0
2006-03-20 09:33:01 0xE88 20234 RTE _DW_IO_AREA_FLUSH=50
2006-03-20 09:33:01 0xE88 20234 RTE _DW_IO_AREA_SIZE=50
2006-03-20 09:33:01 0xE88 20234 RTE _DW_LRU_TAIL_FLUSH=25
2006-03-20 09:33:01 0xE88 20234 RTE ENABLE_CHECK_INSTANCE=YES
2006-03-20 09:33:01 0xE88 20234 RTE ENABLE_SYSTEM_TRIGGERS=YES
2006-03-20 09:33:01 0xE88 20234 RTE ERROR=3
2006-03-20 09:33:01 0xE88 20234 RTE _EVENTFILE=knldiag.evt
2006-03-20 09:33:01 0xE88 20234 RTE _EVENTSIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE EVENT=1
2006-03-20 09:33:01 0xE88 20234 RTE EXPAND_COM_TRACE=NO
2006-03-20 09:33:01 0xE88 20234 RTE EXTERNAL_DUMP_REQUEST=NO
2006-03-20 09:33:01 0xE88 20234 RTE _FBM_LOW_IO_RATE=10
2006-03-20 09:33:01 0xE88 20234 RTE FBM_VOLUME_BALANCE=10
2006-03-20 09:33:01 0xE88 20234 RTE FBM_VOLUME_COMPRESSION=50
2006-03-20 09:33:01 0xE88 20234 RTE FILEDIR_SPINLOCKPOOL_SIZE=10
2006-03-20 09:33:01 0xE88 20234 RTE FORBID_LOAD_BALANCING=NO
2006-03-20 09:33:01 0xE88 20234 RTE FORMATTING_MODE=PARALLEL
2006-03-20 09:33:01 0xE88 20234 RTE FORMAT_DATAVOLUME=YES
2006-03-20 09:33:01 0xE88 20234 RTE HASHED_RESULTSET_CACHESIZE=262144
2006-03-20 09:33:01 0xE88 20234 RTE HASHED_RESULTSET=YES
2006-03-20 09:33:01 0xE88 20234 RTE HEAP_CHECK_LEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE HIRES_TIMER_TYPE=CPU
2006-03-20 09:33:01 0xE88 20234 RTE HS_STORAGE_DLL=libhsscopy
2006-03-20 09:33:01 0xE88 20234 RTE HS_SYNC_INTERVAL=50
2006-03-20 09:33:01 0xE88 20234 RTE _IDXFILE_LIST_SIZE=2048
2006-03-20 09:33:01 0xE88 20234 RTE INIT_ALLOCATORSIZE=237568
2006-03-20 09:33:01 0xE88 20234 RTE INSTANCE_TYPE=OLTP
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_FOR_PRIO=1
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_PER_DEV=1
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_SWITCH=2
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_MAXTAB_LEVEL4=64
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_MAXTAB_LEVEL9=5
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_SEARCH_LEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_TABLEBUFFER=128
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELDIAGFILE=knldiag
2006-03-20 09:33:01 0xE88 20234 RTE KERNELDIAGSIZE=800
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELDUMPFILE=knldump
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELTRACEFILE=knltrace
2006-03-20 09:33:01 0xE88 20234 RTE KERNELTRACESIZE=700
2006-03-20 09:33:01 0xE88 20234 RTE KERNELVERSION=KERNEL 7.6.00 BUILD 018-123-113-357
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_CHK=0
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_DIF=10
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_EQ=5
2006-03-20 09:33:01 0xE88 20234 RTE LOCAL_REDO_LOG_BUFFER_SIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE _LOCK_SUPPLY_BLOCK=100
2006-03-20 09:33:01 0xE88 20234 RTE LOGABOVELIMIT=50L75L90M95M96H97H98H99H
2006-03-20 09:33:01 0xE88 20234 RTE LOGFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE LOGSEGMENTFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE LOG_BACKUP_TO_PIPE=NO
2006-03-20 09:33:01 0xE88 20234 RTE LOG_IO_QUEUE=200
2006-03-20 09:33:01 0xE88 20234 RTE LOG_MIRRORED=NO
2006-03-20 09:33:01 0xE88 20234 RTE LOG_QUEUE_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE LOG_SEGMENT_SIZE=4266
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_NAME_001=D:\DISKL001
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_SIZE_001=12800
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_TYPE_001=F
2006-03-20 09:33:01 0xE88 20234 RTE LRU_FOR_SCAN=NO
2006-03-20 09:33:01 0xE88 20234 RTE MAXBACKUPDEVS=2
2006-03-20 09:33:01 0xE88 20234 RTE MAXCPU=1
2006-03-20 09:33:01 0xE88 20234 RTE MAXDATAVOLUMES=11
2006-03-20 09:33:01 0xE88 20234 RTE _MAXEVENTS=100
2006-03-20 09:33:01 0xE88 20234 RTE _MAXEVENTTASKS=2
2006-03-20 09:33:01 0xE88 20234 RTE _MAXGARBAGE_COLL=1
2006-03-20 09:33:01 0xE88 20234 RTE MAXLOCKS=300000
2006-03-20 09:33:01 0xE88 20234 RTE MAXLOGVOLUMES=2
2006-03-20 09:33:01 0xE88 20234 RTE MAXPAGER=16
2006-03-20 09:33:01 0xE88 20234 RTE MAXRGN_REQUEST=-1
2006-03-20 09:33:01 0xE88 20234 RTE MAXSERVERTASKS=63
2006-03-20 09:33:01 0xE88 20234 RTE _MAXTASK_STACK=1024
2006-03-20 09:33:01 0xE88 20234 RTE _MAXTRANS=264
2006-03-20 09:33:01 0xE88 20234 RTE MAXUSERTASKS=30
2006-03-20 09:33:01 0xE88 20234 RTE MAXVOLUMES=14
2006-03-20 09:33:01 0xE88 20234 RTE MAX_HASHTABLE_MEMORY=5120
2006-03-20 09:33:01 0xE88 20234 RTE MAX_LOG_QUEUE_COUNT=0
2006-03-20 09:33:01 0xE88 20234 RTE _MAX_MESSAGE_FILES=0
2006-03-20 09:33:01 0xE88 20234 RTE MAX_MESSAGE_LIST_LENGTH=100
2006-03-20 09:33:01 0xE88 20234 RTE MAX_RETENTION_TIME=480
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SERVERTASK_STACK=150
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SINGLE_HASHTABLE_SIZE=512
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SPECIALTASK_STACK=200
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_DATA_SIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_QUAL_SIZE=16384
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_STACK_SIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_STRAT_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE MCOD=NO
2006-03-20 09:33:01 0xE88 20234 RTE MEMORY_ALLOCATION_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE MEM_ENHANCE_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE MINI_DUMP=NORMAL
2006-03-20 09:33:01 0xE88 20234 RTE _MINREPLY_SIZE=4096
2006-03-20 09:33:01 0xE88 20234 RTE MINSERVERTASKS=53
2006-03-20 09:33:01 0xE88 20234 RTE MIN_RETENTION_TIME=60
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_READ=2147483647
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_ROWNO=0
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_SELECTIVITY=0
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_TIME=2147483647
2006-03-20 09:33:01 0xE88 20234 RTE _MP_DISP_LOOPS=1
2006-03-20 09:33:01 0xE88 20234 RTE _MP_DISP_PRIO=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_BUSY_WAIT=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_DIRTY_READ=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE MP_RGN_LOOP=-1
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_PRIO=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_QUEUE=YES
2006-03-20 09:33:01 0xE88 20234 RTE _MULT_IO_BLOCK_CNT=4
2006-03-20 09:33:01 0xE88 20234 RTE OFFICIAL_NODE=
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_BLOCKSIZE=10000
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_THRESHOLD=100
2006-03-20 09:33:01 0xE88 20234 RTE _OMS_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE _OMS_RGNS=7
2006-03-20 09:33:01 0xE88 20234 RTE OMS_RUN_IN_UDE_SERVER=NO
2006-03-20 09:33:01 0xE88 20234 RTE OMS_STREAM_TIMEOUT=30
2006-03-20 09:33:01 0xE88 20234 RTE OMS_VERS_THRESHOLD=2097152
2006-03-20 09:33:01 0xE88 20234 RTE ONLINE=1
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_AGGREGATION=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_FETCH_REVERSE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_FIRST_ROWS=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_HASHTABLE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_HASH_MINIMAL_RATIO=1
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_ONEPHASE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_OPERATOR_SORT=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_OUTER=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_PARALLEL_MINSIZE=1000000
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_PARALLEL_SERVERS=0
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_MIN_MAX=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_OPERATOR_JOIN_COSTFUNC=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_OPERATOR_JOIN=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_QUAL_ON_INDEX=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_QUERYREWRITE=STATEMENT
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_CACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_INV_ONLY=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_JOIN_FETCH=0
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_MAX_MERGE=500
2006-03-20 09:33:01 0xE88 20234 RTE OUTOFSESSIONS=2
2006-03-20 09:33:01 0xE88 20234 RTE _PACKET_SIZE=131072
2006-03-20 09:33:01 0xE88 20234 RTE _PAGE_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_COM=10
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_IOC=80
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_RAV=80
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_REX=40
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_U2U=100
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_FACTOR=80
2006-03-20 09:33:01 0xE88 20234 RTE PROTECT_DATACACHE_MEMORY=NO
2006-03-20 09:33:01 0xE88 20234 RTE _READAHEAD_BLOBS=32
2006-03-20 09:33:01 0xE88 20234 RTE REQUEST_TIMEOUT=5000
2006-03-20 09:33:01 0xE88 20234 RTE _RESTART_TIME=600
2006-03-20 09:33:01 0xE88 20234 RTE _ROW_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE _RTEDUMPFILE=rtedump
2006-03-20 09:33:01 0xE88 20234 RTE RTE_TEST_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE RUNDIRECTORY=d:sapdbdatawrkNSP
2006-03-20 09:33:01 0xE88 20234 RTE SEQUENCE_CACHE=1
2006-03-20 09:33:01 0xE88 20234 RTE _SERVERDB_FOR_SAP=YES
2006-03-20 09:33:01 0xE88 20234 RTE SESSION_TIMEOUT=900
2006-03-20 09:33:01 0xE88 20234 RTE SET_VOLUME_LOCK=YES
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL_COMMANDCACHESIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL_EXPECTEDSTATEMENTCOUNT=1500
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL=YES
2006-03-20 09:33:01 0xE88 20234 RTE SHOW_MAX_KB_STACK_USE=NO
2006-03-20 09:33:01 0xE88 20234 RTE SHOW_MAX_STACK_USE=NO
2006-03-20 09:33:01 0xE88 20234 RTE STANDBY=0
2006-03-20 09:33:01 0xE88 20234 RTE SUBTREE_LOCKS=NO
2006-03-20 09:33:01 0xE88 20234 RTE SYMBOL_DEMANGLING=NO
2006-03-20 09:33:01 0xE88 20234 RTE SYMBOL_RESOLUTION=YES
2006-03-20 09:33:01 0xE88 20234 RTE SYSTEMERROR=3
2006-03-20 09:33:01 0xE88 20234 RTE _TAB_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_01=tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_02=ti,100*dw;30000*us;
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_03=compress
2006-03-20 09:33:01 0xE88 20234 RTE TIME_MEASUREMENT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_AK=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ALLOCATOR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CATALOG=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CLIENTKERNELCOM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_COMMON=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_COMMUNICATION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CONVERTER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATACHAIN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATAPAM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATATREE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DBPROC=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DEFAULT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DELETE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FBM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FILEDIR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FRAMECTRL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_INDEX=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_INSERT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_IOMAN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_IPC=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_JOIN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_KSQL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOCK=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGACTION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGHISTORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGPAGE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGTRANS=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGVOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LONG=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_MEMORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_MESSAGES=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECTCONTAINER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_ADD=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_ALTER=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_FREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_GET=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_CONTAINERDIR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_CONTEXT=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_ERROR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_FLUSHCACHE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_INTERFACE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_KEYRANGE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_KEY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_LOCK=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_MEMORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_NEWOBJ=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_SESSION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_STREAM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_VAROBJECT=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_VERSION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OPTIMIZE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ORDER_STANDARD=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ORDER=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_BUP=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_EV=2
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_GC=20
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_LW=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_PG=3
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_SV=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_TI=2
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_US=10
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_UT=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PRIMARY_TREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_QUERYREWRITE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_RUNTIME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SELECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SHAREDSQL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SQLMANAGER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SRVTASKS=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_STOP_ERRORCODE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SYNCHRONISATION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SYSVIEW=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_TABLE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_TIME=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_UPDATE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_VOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRANS_HISTORY_SIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE _TRANS_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE TRANS_THRESHOLD_VALUE=60
2006-03-20 09:33:01 0xE88 20234 RTE UKT_CPU_RELATIONSHIP=NONE
2006-03-20 09:33:01 0xE88 20234 RTE _UNICODE=YES
2006-03-20 09:33:01 0xE88 20234 RTE UPDATESTAT_PARALLEL_SERVERS=0
2006-03-20 09:33:01 0xE88 20234 RTE UPDSTATWANTED=1
2006-03-20 09:33:01 0xE88 20234 RTE USED_MAX_LOG_QUEUE_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE USESELECTFETCH=YES
2006-03-20 09:33:01 0xE88 20234 RTE USEVARIABLEINPUT=NO
2006-03-20 09:33:01 0xE88 20234 RTE _USE_ASYNC_IO=YES
2006-03-20 09:33:01 0xE88 20234 RTE USE_COROUTINES=YES
2006-03-20 09:33:01 0xE88 20234 RTE USE_FIBERS=YES
2006-03-20 09:33:01 0xE88 20234 RTE _USE_IOPROCS_ONLY=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_MEM_ENHANCE=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_OPEN_DIRECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_SYSTEM_PAGE_CACHE=YES
2006-03-20 09:33:01 0xE88 20234 RTE _UTILITY_PROTFILE=dbm.utl
2006-03-20 09:33:01 0xE88 20234 RTE UTILITY_PROTSIZE=100
2006-03-20 09:33:01 0xE88 20234 RTE VOLUMENO_BIT_COUNT=8
2006-03-20 09:33:01 0xE88 20234 RTE _WORKDATA_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE _WORKSTACK_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE XP_CONVERTER_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE XP_DATA_CACHE_RGNS=0
2006-03-20 09:33:01 0xE88 20234 RTE XP_MAXPAGER=0
2006-03-20 09:33:01 0xE88 20235 RTE Dump of all kernel parameters done
2006-03-20 09:33:01 0xE88 19841 DIAGHIST Backup of diagnostic files is in progress
2006-03-20 09:33:01 0xE88 19842 DIAGHIST Backup of diagnostic files has finished
2006-03-20 09:33:01 0xE88 19600 VERSION 'Kernel 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:01 0xE88 19600 VERSION 'W32/INTEL 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:01 0xE88 19769 INFO Starting SERVERDB: 'NSP'
2006-03-20 09:33:01 0xE88 19770 INFO SERVERNODE: 'AUA5062'
2006-03-20 09:33:01 0xE88 19771 INFO Process ID: 2724
2006-03-20 09:33:01 0xE88 19773 INFO Date: 2006-03-20
2006-03-20 09:33:01 0xE88 19772 INFO Owner: 'SYSTEM'
2006-03-20 09:33:01 0xE88 19775 INFO Processors: 1
2006-03-20 09:33:01 0xE88 19782 INFO Fiber: 'YES'
2006-03-20 09:33:01 0xE88 19776 INFO Max virtual memory: 2047 MB
2006-03-20 09:33:01 0xE88 19777 INFO Total physical memory: 1015 MB
2006-03-20 09:33:01 0xE88 19778 INFO Available physical memory: 535 MB
2006-03-20 09:33:01 0xE88 20219 RTE Memory allocation not limited
2006-03-20 09:33:01 0xE88 20220 RTE System page cache usage enabled
2006-03-20 09:33:01 0xE88 19692 TCLUSTER tw;al;ut;2000*sv,100*bup;10*ev,10*gc;ti,100*dw;30000*us;compress
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of 'BUP': 0
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' DW': 16
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' US': 30
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' SV': 63
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' EV': 2
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' GC': 1
2006-03-20 09:33:01 0xE88 19692 TCLUSTER Total Number of UKT 7
2006-03-20 09:33:01 0xE88 19692 TCLUSTER Number of UKT with User Tasks 1
2006-03-20 09:33:01 0xE88 19860 MEMORY I/O buffer cache: 12800 Pages allocated
2006-03-20 09:33:01 0xE88 19811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
2006-03-20 09:33:01 0xE88 19812 EVENTING Eventbuffer 100 events 2 tasks
2006-03-20 09:33:01 0xBBC 19821 TASKING Thread 3004 starting
2006-03-20 09:33:02 0xE88 19831 TRACE_IO Configured _MAX_MESSAGE_FILES:0
2006-03-20 09:33:02 0xE88 19832 TRACE_IO Disabled: No TraceMessagefiles wanted
2006-03-20 09:33:02 0xA1C 19688 THREAD CLOCK thread started
2006-03-20 09:33:02 0xF6C 19688 THREAD TIMER thread started
2006-03-20 09:33:02 0x140 19688 THREAD ASYNC0 thread started
2006-03-20 09:33:02 0x300 20213 RTE CONSOLE thread started
2006-03-20 09:33:02 0xEF4 19688 THREAD REQUESTOR thread started
2006-03-20 09:33:02 0x128 19821 TASKING Thread 296 starting
2006-03-20 09:33:02 0xB28 19821 TASKING Thread 2856 starting
2006-03-20 09:33:02 0x124 19821 TASKING Thread 292 starting
2006-03-20 09:33:13 0xE88 19649 CONNECT Kernel threads initialization timeout
2006-03-20 09:33:13 0xF44 19821 TASKING Thread 3908 starting
2006-03-20 09:33:13 0x3B8 19821 TASKING Thread 952 starting
2006-03-20 09:33:13 0x9F0 19821 TASKING Thread 2544 starting
2006-03-20 09:33:13 0x40C 19821 TASKING Thread 1036 starting
2006-03-20 09:33:13 0xD14 19627 TASKING UKT started, TID:0xD14
2006-03-20 09:33:13 0x664 19627 TASKING UKT started, TID:0x664
2006-03-20 09:33:13 0xB70 19627 TASKING UKT started, TID:0xB70
2006-03-20 09:33:13 0x80C 19627 TASKING UKT started, TID:0x80C
2006-03-20 09:33:13 0x908 19627 TASKING UKT started, TID:0x908
2006-03-20 09:33:13 0x448 19627 TASKING UKT started, TID:0x448
2006-03-20 09:33:13 0xEE8 19627 TASKING UKT started, TID:0xEE8
2006-03-20 09:33:13 0xEE8 19615 VOLUMEIO Attaching volume 'knltrace'
2006-03-20 09:33:13 0x830 19613 DBSTATE I/O thread for 'knltrace' started
2006-03-20 09:33:13 0xEE8 20038 Admin Kernel state: 'ADMIN' reached
2006-03-20 09:33:13 0xEE8 20023 Pager Initialized without clustered IO
2006-03-20 09:33:13 0xEE8 54003 dynpool HIST_DIR item size : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool HIST_DIR num items : 30
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_B930_HIST_DIR : 240
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FileListItemSize : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX NumFileListItems : 2048
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FileListSizeAll : 16384
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FunnelItemSize : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX QueueItemPtrSize : 4
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX QueueItemSize : 36
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX SortItemSize : 16
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX NumFunnelItems : 2048
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FunnelSizeAll : 131072
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_B49_IDXSIZE : 147456
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K57_KB_PAGES : 11
2006-03-20 09:33:13 0xEE8 9 SrvTasks Available Servertasks: 63
2006-03-20 09:33:13 0xEE8 54003 dynDATA BACKUP RESTART REC (8K): 1
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TASK LIST : 208
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TAPE LIST : 688
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP DEVSP LIST : 96
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP VOL IDX LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP SRR QUEUE : 656
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_K38_SAVE_GLOB : 1584
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K38_SAVE : 217
2006-03-20 09:33:13 0xEE8 54003 dynDATA BACKUP RESTART REC (8K): 1
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TASK LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TAPE LIST : 688
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP DEVSP LIST : 16
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP VOL IDX LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP SRR QUEUE : 128
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_K38_AUTOSAVE : 880
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K38_AUTOSAVE : 41
2006-03-20 09:33:13 0xEE8 19930 TASKING Kernel initialization completed
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 5
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:0
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 20
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:1
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 19
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:2
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 18
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:3
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 17
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:4
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 16
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:5
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 15
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:6
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 14
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:7
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 13
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:8
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 12
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:9
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 11
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:10
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 10
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:11
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 9
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:12
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 8
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:13
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 7
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:14
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 6
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:15
2006-03-20 09:33:13 0xF6C 3 RunTime State changed from STARTING to ADMIN
2006-03-20 09:33:13 0xF6C 19601 DBSTATE SERVERDB is ready
============================================ begin of write cycle ==================
2006-03-20 09:33:13 0xF6C 20223 RTE Database tries automatic restart
2006-03-20 09:33:13 0x1F0 19821 TASKING Thread 496 starting
2006-03-20 09:33:13 0x448 19633 CONNECT Connect req. (T21, Node:'', PID:4084)
2006-03-20 09:33:13 0x448 19615 VOLUMEIO Attaching volume 'D:\DISKD0001'
2006-03-20 09:33:13 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:14 0xEE8 31 SrvTasks Permanently reserved 13 servertasks for 'Backup / Restore'.
2006-03-20 09:33:14 0xEE8 31 SrvTasks Permanently reserved 2 servertasks for 'Backup / Restore'.
2006-03-20 09:33:14 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:15 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:15 0x448 ERR 20031 IOMan IOMan_Volume.cpp:976
2006-03-20 09:33:15 0x448 ERR 20031 IOMan 2006-03-20 09:33:15 IOMan Error 20031
2006-03-20 09:33:15 0x448 ERR 20031 IOMan Attach error on Data volume 1: error evaluating volume
2006-03-20 09:33:15 0x448 ERR 3 Admin Kernel_Administration.cpp:606
2006-03-20 09:33:15 0x448 ERR 3 Admin 2006-03-20 09:33:15 Admin Error 3
2006-03-20 09:33:15 0x448 ERR 3 Admin Database state: OFFLINE
2006-03-20 09:33:15 0x448 ERR 3 Admin + Kernel_Trace.cpp:223
2006-03-20 09:33:15 0x448 ERR 3 Admin + 2006-03-20 09:33:15 KernelCommon Info 6
2006-03-20 09:33:15 0x448 ERR 3 Admin - Internal errorcode, Errorcode 9050 "disk_not_accessible"
2006-03-20 09:33:15 0x448 ERR 3 Admin + Kernel_Administration.cpp:365
2006-03-20 09:33:15 0x448 ERR 3 Admin + 2006-03-20 09:33:15 Admin Error 20014
2006-03-20 09:33:15 0x448 ERR 3 Admin - RestartFilesystem failed with 'I/O error'
2006-03-20 09:33:15 0x448 19651 CONNECT Connection released, T21
2006-03-20 09:33:15 0x448 19621 DBSTATE Shutdown kill requested
2006-03-20 09:33:15 0xE88 ERR 7 Messages Msg_List.cpp:3617
2006-03-20 09:33:15 0xE88 ERR 7 Messages 2006-03-20 09:33:15 Messages Error 7
2006-03-20 09:33:15 0xE88 ERR 7 Messages Begin of dump of registered messages
2006-03-20 09:33:15 0xE88 ERR 10 Messages Msg_List.cpp:3631
2006-03-20 09:33:15 0xE88 ERR 10 Messages 2006-03-20 09:33:15 Messages Error 10
2006-03-20 09:33:15 0xE88 ERR 10 Messages abort dump of registered messages
2006-03-20 09:33:15 0xE88 ERR 8 Messages Msg_List.cpp:3636
2006-03-20 09:33:15 0xE88 ERR 8 Messages 2006-03-20 09:33:15 Messages Error 8
2006-03-20 09:33:15 0xE88 ERR 8 Messages End of the message list registry dump
2006-03-20 09:33:15 0xD14 20000 Trace Start flush kernel trace
2006-03-20 09:33:15 0xD14 19617 VOLUMEIO Single I/O attach, 'knltrace', UKT:1
2006-03-20 09:33:15 0xE88 19684 TASKING Tracewriter termination timeout: 1200 sec
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE RTE_ExternalCall.cpp:877
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE 2006-03-20 09:33:15 RTE Error 20125
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE Database automatic restart failed
2006-03-20 09:33:16 0xD14 20001 Trace Stop flush kernel trace
2006-03-20 09:33:16 0xD14 20002 Trace Start flush kernel dump
2006-03-20 09:33:16 0xD14 20003 Trace Stop flush kernel dump
2006-03-20 09:33:16 0xD14 19619 TASKING Releasing tracewriter
2006-03-20 09:33:16 0xE88 19890 DIAGHIST Backup of diagnostic files will be forced at next restart
2006-03-20 09:33:16 0xE88 19600 VERSION 'Kernel 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:16 0xE88 19654 DBSTATE SERVERDB 'NSP' has stopped
-------------------------------------------- current write position ----------------
Maybe you are looking for
-
How do I make a shop page on my Muse website
Hey BC people, I have built a website with Muse and have got my client to sign up to a BC account that suits their needs. I am wanting to insert a shop page on my Adobe Muse built website. From what I read I could drop a module (created in BC) onto t
-
CSCui55504 - show Mac address table from RP gives an error msg and40;but from SP works )
Hello Cisco, Is there any updates or ETA regarding this bug, as our production 6500 core switch is experiencing this issue and viewing mac-table is a critical activity we perform everyday to troubleshoot client connections.
-
Qill my mac accept any IDE/ATAPI interface DVD writer?
Hello, I'm currently seeking to upgrade my Quicksilver's 1x Superdrive to a newer, faster DVD writer. I was looking at a Lightscribe 20x DVD writer to transform the painfully slow burning sessions into quicker put-on-DVD archival making. +(RAW files
-
I want to install a larger main hard drive
Hi, I only have a 80 GB start up drive and have a 250GB IDE hard drive that i would like to replace it with. Could someone please tell me or give me links to how to physically install,and reformat with all of my current data and settings intact. I al
-
Accented characters, XML, Flash
I have a flash application which is pulling information to populate dynamic fields from two XML files. We have three languages supported, and have been having problems with the non-english accented characters displaying properly when they are called