Installation Solution Manager on Oracle 10g / AIX 6.1 - Oracle Patches

Hi guys,
I have a question.
I'm on a project to install ERP 6.0 and I will start installing Solution Manager 7.0 EHP1, through no fault, the project is long overdue and urgently need the Solution Manager for the team project starts.
The SAP platform is AIX 6.1 / Oracle 10.2.0.4. When I'm installing the central instance of Solution Manager, where the process to install Oracle Database Software Installation, then Current Patch Set (10.2.0.4) and lastly Required Interim Patches, which would be the point 4.7.4 of the Installation Guide SAP Solution Manager 7.0 including SAP Enhancement Package 1 on AIX - Oracle, can jump this last step (Required Interim Patches) and install these patches later ????? O is mandatory to install the Interim Patches to continue installing of SM.
Thanks a lot.
Desiré

Hello Desirée
If you take a look at the note, Oracle/SAP have change the patches policy.
Currently there is only ONE "patch" to be installed.
It is called a SAP patch Bundle (or something like that)
It contains the latest PSU, and all required SAP individual patches.
It must be installed with Mopatch.
it has been released the 10th of this month.
This can facilitate the task of installing patches (only one to "take care off"

Similar Messages

Connect Oracle 10g client to the Oracle 10g database behind a firewall

I need to connect an Oracle 10g client to the Oracle 10g database (windows server 2003 box) behind a firewall. I ran into this problem: Port redirection. Port redirection requires the Oracle client to connect to the database using a different port (usually a randomly selected TCP port) than the default or originally configured one. If there is no firewall between the server and the client, port redirection will not affect the actual connection. However, if port redirection does occur with the server behind a firewall, the client will be likely to suffer from a connectivity failure. The reason is simple: the newly assigned port based on port redirection is often blocked by the firewall. Such failures are not uncommon on Windows platforms.
I don't know how to stablished an unique TCP port.
I Enabled USE_SHARED_SOCKET on the Oracle database server, windows registry. Acording to what I read,that will force the server machine to share its port 1521 and thus all clients will stay on that port when connecting to the database. Noticeably, port redirection will not occur with USE_SHARED_SOCKET enabled, but that's true in oracle 8 or oracle 9. In oracle 10g this solution doesn't work.
I will apreciate any help about this. Please!
Thanks in advanced.

Three solutions in order of preference
1 Use Connection Manager on the server (only installed using a Custom Install). This will tunnel all traffic through a single port. It will also allow you to configure allowable nodes
2 Set up shared server to use a fixed port. Disadvantage: shared server has overhead and the number of connections is limited
3 Use shared_sockets. Disadvantage: when you stop the listener everyone is disconnected.
Sybrand Bakker
Senior Oracle DBA

Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

Hi
I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
Ramanbir S

You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

Oracle 10g Express Edition for Oracle Enterprise Linux

Hi All,
Can I install Oracle 10g Express Edition for Oracle Enterprise Linux?
And which for? Enterprise Linux Release 5 or 4?
Thanks.
Attila

It's certified with Enterprise Linux 4.
Werner

Limitations of Oracle 10G XE as against Oracle 10G Standard Edition

Can you please give the information regarding....
1. Capabilities of Oracle 10G XE (Express Edition)
2. Limitations of Oracle 10G XE as against Oracle 10G Standard Edition

Have a look at the License Information:
http://download-uk.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJBGGA
There's also a feature matrix in pdf-format:
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
C.
Message was edited by:
cd

Can we access Oracle 10g R2 database from Oracle 11g Client

Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html

832812 wrote:
Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html
Check this note for client/server compatibility
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]

Oracle 10g rac ora-01092 oracle instance terminated disconnection forced

hi
I am getting following error on 2 node RAC (on NFS mount point )
oracle 10g rac ora-01092 oracle instance terminated disconnection forced
br
anuj singh

Anju,
Its really very difficult to tell you what exactly went wrong with the limited information given by you. Did you check the alert log and other cluster (crsd and cssd ) logs? If not, I would strongly recommend you to pay attention to these logs for any clue.
Jaffar

Error in Phase during installation Solution Manager 7.1

Dear all,
when I want to install the Solution Manager 7.1 it comes an error during a installation phase.
The log of the error (JAVA) is:
ConfigMainExt state200
TYPE=A<BR>STATE=<BR>INFO_SHORT=com.sap.security.core.server.destinations.api.DestinationException: com.sap.security.core.server.destinations.api.DestinationException: [destination_0000] No such destination of type WebService exists.
     at com.sap.security.core.server.destinations.service.DestinationServiceImpl.getDestinationNames(DestinationServiceImpl.java:278)
     at com.sap.ctc.util.DestinationConfig.maintainDestination(DestinationConfig.java:122)
     at com.sap.ctc.util.DestinationConfig.maintainWebServiceDestination(DestinationConfig.java:93)
     at com.sap.ctc.util.DestinationConfig.performFunction(DestinationConfig.java:50)
     at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:74)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
//   => Maintaining Destination Service: sap.com/tcwdpdfobject/com.sap.tc.webdynpro.adsproxy.AdsProxy/ConfigPort_Document
ERROR: Destination Service not available! // No such destination of type WebService exists.
<BR>CONFIGURATION=
Can anyone tell me what it is?

Hello,
What phase of the installation does this error occur?
Is it failing to start the Java Engine?
The reason I ask is the JVM will fail until you have set the java parameters, and you can't do that until the j2ee/configtools directory is created and you can run configtools, and that doesn't happen untilt eh start of the JVM phase, and then it always fails because the MAXHEAP is set too low by default and other parameters need setting. Then when the Install is re-started it can start the JVM and continue.
This is not mentioned in the install guide. However if you are failing in another step, you would need to mention what step.
You need to name the log you are showing the error, because it may or may not be the right log to look at, or it may be an error, but is not the cause. So if my guess is not right, please specify the phase name it fails and the log you reference, because there may be other logs that have better information as to why it failed. One you should check is dev_server0, in work.
Regards,
Paul

Installation Solution Manager

HI All,
We have installed Solution Manager 4.0 in the following configuration
DB SQL-2005 ,OS Windows-2003 .I would like to know the procedure for installing Solution Manager 4.0 in the following configuration
DB　　　ORACLE　9.2　64-BIT
OS　　　HPUX　　11.23/IA64 64BIT
Regards,
L Srikanthan.

Hello ,
Please download the relevent document from the below url :
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000075728&
Regards,
Santosh

IDES ERP 2004 installation / Solution manager

I am about to install IDES ERP 2004 on a test desktop system and I would like to know if I also need to install solution manager, any suggestions?
Thanks
Frank

Hi Frank,
Welcome to SDN!
You can find the guide for ERP 2004 installation at
http://service.sap.com/instguides -> ERP 2004. Its
the same as a DB instance isntallation. You just have to
provide the IDES DVDs. No need to install the solution manager.
Regards
Srikishan

Installation Solution Manager error in the step Import Abap

We are installing Solution Manager but in the step import abap, appear
the error:
/usr/sap/SML/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/SML/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SML/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SML/SYS/exe/run/R3load: END OF LOG: 20091202234420</message>
I appreciate your help for this problem
Regards.
Ricardo Rivas

Hi,
Check SAP note 898181.
Thanks
Sunny

Installation Solution Manager: R3load testconnct:ERROR

Just about to install Solution Manager 7.0 on a Linux SUSE with MaxDB.
Step IMPORT ABAP gives an error (in R3load.exe.log)
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20100401095047
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:39:36
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20100401095047
No idea what DBSL_CMD_IMP_FUNS_SET rc=20 could mean???
Any idea?

Hello Henrik,
This sounds like you are trying to install the license and getting this issue.
Please review SAP Note 359944
Please run 'saplicense -show' again under user <sid>adm, and make sure the version of saplicense, it is Release 640 or Release 4.5B
check db-library version run command 'disp+work -v', then you will see the kernel version and dbsl patch level
update if necessary:
If releases of SAPLICENSE and dbsl are different, eg. SAPLICENSE is 640, but your kernel is 4.5B, please goto Service Marketplace and update the executables.
Thanks,
Mark

Oracle 10g AS pacth for Oracle Apps 11i

Hi everyone,
I have installed Oracle 10g AS (10.1.2.0.2) for Oracle Business Intelligence on Sun Solaris 10 (64 bit) and integrated it with Oracle Apps 11i (11.5.10.2).
Everything seems fine but i am facing problems like
1) Toolbars not appearing correctly sometimes like it is disabled and enables by itself.
2)sometimes clients come accross "Connection with Server lost..." error while taking export (very few).
3) Its giving the error (mentioned at the end) only on one client machine while taking export to Excel.
I have tried installing Oracle 10g AS patch set 2 10.1.2.2 for Solaris but the problem persisits. Is patch set 2 compatible or certified with Oracle Apps 11i? if not then is there any other work around or do i have to wait for some new patch.
Thanx for your inputs.
Najeeb
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\ASHIBEL
Proxy Configuration: Manual Configuration
Proxy: http=EMRPXY1:80,https=EMRPXY1:80,ftp=EMRPXY1:80,gopher=EMRPXY1:80
Proxy Overrides: emrpxy1:80,<local>
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Installed custom security manager
Could not assertPermission PermissionID.SYSTEM for IE
This can cause "Warning : Applet Window" to be displayed when running with IE
attempt 1: adding Protocol.protocol -> rmi
attempt 1: adding default Protocol.timeoutsecs -> 40
attempt 1: adding RMIProtocol.transport -> http
attempt 1: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 1: adding RMIProtocol.hijacksessionid -> 1
attempt 1: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 1: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
attempt 2: adding Protocol.protocol -> rmi
attempt 2: adding default Protocol.timeoutsecs -> 40
attempt 2: adding RMIProtocol.transport -> https
attempt 2: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 2: adding RMIProtocol.hijacksessionid -> 1
attempt 2: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 2: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
Discoverer Model - 10.1.2.48.18
New LOOKUP
Lookup Requested
Performing lookup RMI lookup: http://discoverer.emaar.ae:7777//discoverer/plus
Reading bytes from input stream
Unmarshalling response
Session ID:2007061817102717616
BI Beans Graph version [3.2.2.0.24]
BI Beans Graph version [3.2.2.0.24]
The export/print operation failed
Worker oracle.disco.publish.PublishData@6ffeb, command=ExportData failed with DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0 wrapping exception oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
Error: DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
     at oracle.disco.remote.corba.RMIToCorba.convertRemoteException(Unknown Source)
     at oracle.disco.model.corbaserver.ModelInterface._handleGenericExceptions(Unknown Source)
     at oracle.disco.model.corbaserver.ModelInterface.getBinaryData(Unknown Source)
     at oracle.disco.model.corbaserver.ModelInterface.GetBinaryData(Unknown Source)
     at oracle.disco.model.corbaserver.serverrequest.DsrBinaryExport.xmlUpdateServer(Unknown Source)
     at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(Unknown Source)
     at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
     at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
     at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
     at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
     at oracle.disco.model.corbaserver.export.ExportInputStream._readBuffer(Unknown Source)
     at oracle.disco.model.corbaserver.export.ExportInputStream.read(Unknown Source)
     at java.io.InputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at oracle.disco.publish.PublishData._writeBinaryData(Unknown Source)
     at oracle.disco.publish.PublishData._exportSheets(Unknown Source)
     at oracle.disco.publish.PublishData.runDiscoWorker(Unknown Source)
     at oracle.disco.worker.DiscoWorker.runWorker(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorker.run(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue._runWorker(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue.access$100(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._run(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._runMaybeBlocked(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext.run(Unknown Source)
     at oracle.bali.ewt.worker.ThreadWorkerQueue$TaskAdapter.runTask(Unknown Source)
     at oracle.bali.share.thread.TaskScheduler.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.processTask(Unknown Source)
     at oracle.bali.share.thread.TaskScheduler$TaskQueue.run(Unknown Source)
     at oracle.bali.share.thread.Timer.doRun(Unknown Source)
     at oracle.bali.share.thread.Timer.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi
The last I heard is that 10.1.2.2 is not yet certified for use against E-Business Suite unless your operating system is Linux. Please take a look at this posting on Steven Chan's blog: http://blogs.oracle.com/schan/2007/04/23
The issues you are encountering, particularly the one with the toolbars disappearing, were fixed in patch 5345528 as described on my blog here: http://learndiscoverer.blogspot.com/2006/08/more-to-toolbar-icons-graying-out.html
I would advise you to go for this patch first until Oracle certify 10.1.2.2. for Sun.
Best wishes
Michael

Password problem in oracle 10g after upgrading from oracle 9i

Hi to all,
i'm migrating oracle 9i to oracle 10g. in oracle 9i username/password are same character(eg kareem/kareem)
after upgrading to oracle 10g will it create any problem. Because in oracle 10g the condition is when creating user is username and password should not contain same character (kareem/kareem not allowed).
Thanks in advance

in oracle 10g document, they have mention below condition to create user. See the second condition.
• Passwords must be between 4 and 30 characters long.
• Passwords cannot be the same as the user name.
• Passwords must be from the database character set and can include the underscore (_), dollar ($), and pound sign (#) characters.
• Passwords cannot be Oracle reserved words.
• Don't start the password with a numeral.
• Don's use change_on_install or manager as passwords, since they are used by Oracle.
As i'm going to upgrade oracle 9i to 10g. if it give problem because username and password are same then i have to request my development team to change the password in their application.Can you please verify and tell me.
Edited by: user7071421 on Sep 25, 2008 4:33 AM

Oracle 10g Database Server or Oracle 10g Application Server

Greetings and Salutations!
I need to install APEX 3.01 for development purposes and I'm wondering if I need to do an Oracle 10g Database Server installation, an Oracle 10g Application Server installation, and then the APEX 3.01 installation, or is there another way such as an Oracle 10g Application Server installation and then the APEX 3.01 installation.
I'm confused and I need advice.
Thanks,
Charles

Apex software runs inside the database using the database's PL/SQL engine.
Apex software is accessed via HTTP requests that may be sent to an HTTP server as included on the database 'companion CD' or in the Application Server.
Apex installation is described in the APEX install manual at http://www.oracle.com/technology/products/database/application_express/index.html

Installation Solution Manager on Oracle 10g / AIX 6.1 - Oracle Patches

Similar Messages

Maybe you are looking for