Installation Solution

I downloaded iTunes 6 today and had the same installation headaches as everyone else. I tried installing with WinRar, I tried downloading the Quicktime standalone, I tried everything. I kept getting error code -3 and then error code 1402. Finally, this worked:
1)Download the iTunes 6 Setup. Run it and ignore any error messages during the QT install.
2)Download the Quicktime standalone installer.
3)Go to http://docs.info.apple.com/article.html?artnum=93865 and follow the instructions under "Step 3."
4)Run the QT standalone installer.
5)iTunes should work.
Hope that helps!
-aridneptune

You'll need the standalone installer to install QT by itself.

Similar Messages

Error in Phase during installation Solution Manager 7.1

Dear all,
when I want to install the Solution Manager 7.1 it comes an error during a installation phase.
The log of the error (JAVA) is:
ConfigMainExt state200
TYPE=A<BR>STATE=<BR>INFO_SHORT=com.sap.security.core.server.destinations.api.DestinationException: com.sap.security.core.server.destinations.api.DestinationException: [destination_0000] No such destination of type WebService exists.
     at com.sap.security.core.server.destinations.service.DestinationServiceImpl.getDestinationNames(DestinationServiceImpl.java:278)
     at com.sap.ctc.util.DestinationConfig.maintainDestination(DestinationConfig.java:122)
     at com.sap.ctc.util.DestinationConfig.maintainWebServiceDestination(DestinationConfig.java:93)
     at com.sap.ctc.util.DestinationConfig.performFunction(DestinationConfig.java:50)
     at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:74)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
//   => Maintaining Destination Service: sap.com/tcwdpdfobject/com.sap.tc.webdynpro.adsproxy.AdsProxy/ConfigPort_Document
ERROR: Destination Service not available! // No such destination of type WebService exists.
<BR>CONFIGURATION=
Can anyone tell me what it is?

Hello,
What phase of the installation does this error occur?
Is it failing to start the Java Engine?
The reason I ask is the JVM will fail until you have set the java parameters, and you can't do that until the j2ee/configtools directory is created and you can run configtools, and that doesn't happen untilt eh start of the JVM phase, and then it always fails because the MAXHEAP is set too low by default and other parameters need setting. Then when the Install is re-started it can start the JVM and continue.
This is not mentioned in the install guide. However if you are failing in another step, you would need to mention what step.
You need to name the log you are showing the error, because it may or may not be the right log to look at, or it may be an error, but is not the cause. So if my guess is not right, please specify the phase name it fails and the log you reference, because there may be other logs that have better information as to why it failed. One you should check is dev_server0, in work.
Regards,
Paul

Oracle Applications R12.1.3 Installation Solutions Required

Hi,
Background : We are implementing Oracle applications (R12.1.3) on linux environments (Linux/ Solaris - not yet decided)
Total Users 10000. We want the best practices used for handling 10000+ users in terms of following:
1. Hardware Details ( From any of your current configuration)
a> RAM Details
b> HDD Details
c> SAN Details
d> CPU details
2. How Sizing of Oracle applications must be done to avoid performance issues ? (Forecasting for 3 year)
a> unix mount point sizing
b> tablespace sizing
c> init parameter sizing
d> concurrent manager sizing (Scheduling list of concurrent managers)
e> archive log files sizing
f> web-based users -> oacore sizing
g> form-based users sizing
3. Installation Of Oracle applications R12.1.3 (base language + other languages) [in detail]
4. Installation of Oracle Diagnostics Module (in detail)
5. Custom Top Creation in R12.1.3 (in detail)
6. How to add new Concurrent Manager and how to schedule requests to Concurrent Managers defined
7. Monitoring Scripts for Oracle Applications.
8. Best practices used for backup of Oracle applications (Hotbackup and Coldbackup) - RMAN + other methods
a> increemental backups
b> hotbackups
c> coldbackups
9. Sample Application DBA Templates
10.Printer Configuration in Oracle Applications (PDF and Check printing Methods)
11.Workflow Mailer Configuration in Oracle Applications
12. How to add new products in R12[in detail]
Appreciate your help !
PS: RHEL/Sun Solaris Document will be helpful.
Thanks and Regards
Ketan Punamiya

Duplicate post.
Installing Oracle Applications R12.1.3 on Linux Solutions Required
Installing Oracle Applications R12.1.3 on Linux Solutions Required

AdobeColorCommonSetRGB/Error 1603 installation solution

I wanted to share this fix I found at another Adobe forum. I was getting this error, when trying to install CS4. I run Windows XP.
AdobeColorCommonSetRGB
Error:
Error 1603. Fatal error during installation.
What was happening here is that CS4 is trying to replace the sRGB Color Space Profile.icm, which is located here:
System32\spool\DRIVERS\COLOR\sRGB Color Space Profile.icm
This happens, because above the file is LOCKED.
I installed "Unlocker" http://ccollomb.free.fr/unlocker
I searched for the file and unlocked it, tried the installation again and it worked with no problem. It just could not replace sRGB Color Space Profile.icm.
Now, if someone would explain why the Adobe shortcuts weren't installed...:-) That's the only glitch I had.
Hope this helps!
Gloria

In this reply you'll find a solution for the problem in windows 7.
As said before the error occurs when installing the file AdobeColorCommonSetRGB.
The problem is caused by programs locking the file sRGB Color Space Profile.icm. In my case Explorer. As you cannot kill the explorer to unlock the file I found another solution to rename it:
Start windows 7 in safe mode with prompt. In this mode there is no explorer to lock the file.
First you need rights to rename the file
1. At the command prompt, input
takeown /f c:\windows\system32\spool\drivers\colors\sRGB*.icm
2. Press Enter on the keyboard.
3. A message will be displayed that this completed successfully.
4. Now input icacls c:\windows\system32\spool\drivers\colors\sRGB*.icm /grant (your username):f
5. A message will be displayed that this completed successfully
6. Now input ren c:\windows\system32\spool\drivers\colors\sRGB*.icm srgbold.icm .
Boot to your normal windows to reinstall the CS4 program. It creates a new sRGB Color Space Profile.icm.
Good luck.

ITunes 7.0 Installation - Solution!

Chances are if you are reading this, you have experiencced iTunes 7.0 download issues. Like many other PC users on this discussion forum there are some unique and similar problems regarding Apple's latest release. For those who clicked the box to download iTunes 7.0 after the Sept. 14th release the program may have never fully downloaded. In my case it got to the last two or three bars and just hung up completely. Removing the program and reinstalling iTunes 7.0 did not fix the problem. The iTunes Support downloads were useless in resolving the issue as well. When I finally decided to remove iTunes using Advanced Uninstaller Pro 2006 I thought why not go back to iTunes 6.05 which worked just fine.
iTunes 7.0 creates a iTunes Music Library.xml file that will likely prohibit you from running a lower version of iTunes and accessing your library. After hours of trying to fix it myself, researching the internet and chat rooms I thought, why not bug my brother-in-law who works for Apple. If you wish to go back to 6.05 until Apple fixes some issues on 7.0 follow these steps:
1) Uninstall iTunes 7.0
2) Make sure your music remains in the c:\my documents\my music\iTunes\iTunes Music folder
3) Download iTunes 6.05 from the following site: www.apple.com/support/downloads/itunes605forwindows.html
4) Complete the installation and open Windows Explorer
5) Copy your "Previous iTunes Library" from c:\my documents\my music\iTunes\Previous iTunes Library directly into the iTunes directory. To do this select the file, right mouse copy and go up to iTunes and right mouse paste.
6) Return to your desktop or start menu and lauch iTunes 6.05. Once the program launches do not click on download 7.0. Apple engineers are working to resolve these issues and another release 7.01 or something is inevitable.
iTunes 7.0 preserves the Previous Library however you have to copy it over as described above to get around the error message regarding the fact that iTunes cannot access the library because of the reference to the higher version. Once you follow these steps you will be back to grooving out with your music.
Once everything is working again feel free to email the folks at the Apple Support at the following website and let them know how much fun you have had with 7.0: www.apple.com/support/itunes/store/download
Best Wishes!
Brett Morey
www.brettmorey.com

I have had nothing but problems with the iTunes email support... At one point their ineptness was almost comical. I might have laughed if I hadn't been so ticked off.
Your solution is the one I used to solve my quicktime skipping problems until I discovered that upping the Khz and bit rates solved the problem... So, I went to download a new TV episode of Monk and it told me I couldn't until I upgraded to 7.0.1 which I did.
Now all of the music and videos that I downloaded under a previous email address can not be authorized for some reason.
I'm really getting tired of all of these problems... As soon as something else comes along that's comparable, I'm going to jump ship!

Mac Installer Solution

On Mac OS 10.6 (Snow Leopard), I was having the same problem described by many in various discussions on these forums.
At my company, we have found that, beginning with CS3, the Adobe Updater very often will not run (or rather will launch and immediately quit) if run under any user other than the first user created on the Mac (in spite of the fact that all users on the machines are Admin users). To get around this problem, we run the updater from Terminal with Sudo or as the user known to have been the first one created (that one is always assigned the UID 501).
Having remembered that, I tried running the Flash Catalyst installer as the user who was first created on my MacBook Pro. The installer ran very quickly and completely. Once installed, I can log in as any other user and run the application without any problem.
Please, Adobe, find out what's going wrong with your Mac installers and updaters that's looking for that 501 user and fix it. You'll save everyone days of troubleshooting and save yourself a lot of frustrated users and system admins.

Hi bsorgi!
Thanks for the post.
I agree that the permissions may be to blame here. try using the disk utility to first verify, then repair the disk permissions. After they are repaired, you should be able to run the installer successfully.
This didn't answer your question? Find more help at Contact Us. If this is a time sensitive-matter, additional support options are available.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error I-001 with Applications and Driver Installations (SOLUTION INCLUD

[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=27704&jum p=true#M27704">Verified Solution further in Thread[/url]
Hi,
Right to get straight to the point, I have just downloaded the new Console Launcher beta and the new Release of WaveStudio 7. After attempting to try and install them both, and getting the same error message of I-00, and finding that Creative have decided to pass the blame for this error onto InstallShield and it's developers. I have found that it is not actually their fault.
According to the Install log file for both of these applications, they are looking for DirectX either installed on the machine, or the redistrobutable in the installation package to perform any required updates. However, when searching, it apparently cannot find DirectX for some unknown reason.
Creative, this is really a pretty lame error on your behalf, and could be solved with a few minor modifications to your InstallScript from with-in the InstallShield IDE. Then simply re-compile and distrobute an updated installtion package.
Is it far too much to ask for your developers to actually research and test problems. I mean I am a programmer, and know that there is a pre-requisite setting in the InstallShield IDE allowing you to detect and update DirectX as needed, so why your dev's are trying to do it another way is beyond me.
Please fix these stupid mistakes.
Andrew.
Message Edited by andyr2005 on 07-28-2008 07:28 PMMessage Edited by andyr2005 on 07-28-2008 07:28 PMMessage Edited by andyr2005 on 07-28-2008 07:29 PMMessage Edited by andyr2005 on 07-28-2008 07:32 PM

Hi,
Well, Richard-CL has assured me that the details I provided above have been passed on to the developers. But whether the problem is resolved or not is yet to be seen.
I am working on fixing the InstallShield problem myself for my own personal use, however, I am not sure how Creative would react to allowing other people to use or download the applications.
Considering that I will only be fixing the installer, and not actually hacking any features etc.
Andrew.

IDES ERP 2004 installation / Solution manager

I am about to install IDES ERP 2004 on a test desktop system and I would like to know if I also need to install solution manager, any suggestions?
Thanks
Frank

Hi Frank,
Welcome to SDN!
You can find the guide for ERP 2004 installation at
http://service.sap.com/instguides -> ERP 2004. Its
the same as a DB instance isntallation. You just have to
provide the IDES DVDs. No need to install the solution manager.
Regards
Srikishan

Installation Solution Manager on Oracle 10g / AIX 6.1 - Oracle Patches

Hi guys,
I have a question.
I'm on a project to install ERP 6.0 and I will start installing Solution Manager 7.0 EHP1, through no fault, the project is long overdue and urgently need the Solution Manager for the team project starts.
The SAP platform is AIX 6.1 / Oracle 10.2.0.4. When I'm installing the central instance of Solution Manager, where the process to install Oracle Database Software Installation, then Current Patch Set (10.2.0.4) and lastly Required Interim Patches, which would be the point 4.7.4 of the Installation Guide SAP Solution Manager 7.0 including SAP Enhancement Package 1 on AIX - Oracle, can jump this last step (Required Interim Patches) and install these patches later ????? O is mandatory to install the Interim Patches to continue installing of SM.
Thanks a lot.
Desiré

Hello Desirée
If you take a look at the note, Oracle/SAP have change the patches policy.
Currently there is only ONE "patch" to be installed.
It is called a SAP patch Bundle (or something like that)
It contains the latest PSU, and all required SAP individual patches.
It must be installed with Mopatch.
it has been released the 10th of this month.
This can facilitate the task of installing patches (only one to "take care off"

Installation Solution Manager error in the step Import Abap

We are installing Solution Manager but in the step import abap, appear
the error:
/usr/sap/SML/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/SML/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SML/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SML/SYS/exe/run/R3load: END OF LOG: 20091202234420</message>
I appreciate your help for this problem
Regards.
Ricardo Rivas

Hi,
Check SAP note 898181.
Thanks
Sunny

Adobe Premiere Pro Family CS5.5 - Installation Solution

When attempting to install encore cs5.5 I receive the following error logs:
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
ERROR: DW050: - Adobe Encore CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Mini Bridge CS5.1: Install failed
ERROR: DW050: - Adobe Encore CS5.1_AdobeEncore5.1en_USLanguagePack: Install failed
ERROR: DW050: - ph: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Bridge CS5.1: Install failed
ERROR: DW050: - Adobe Encore CS5.1 Library: Install failed
I turned off my firewalls, antivirus etc. checked to see if the msi was running and still nothing.
Adobe does not provide phone support and their customer chat directed me here, again.

I recall few discussions that really take advantage of knowledge of such error logs They do point to areas of issues.
Did Premiere and other elements install okay? Is this error log redacted? (If so, okay; just curious.)
See this checklist, which may be helpful is you have not already done them all.
Installation Issues? A Checklist

Installation Solution Manager

HI All,
We have installed Solution Manager 4.0 in the following configuration
DB SQL-2005 ,OS Windows-2003 .I would like to know the procedure for installing Solution Manager 4.0 in the following configuration
DB　　　ORACLE　9.2　64-BIT
OS　　　HPUX　　11.23/IA64 64BIT
Regards,
L Srikanthan.

Hello ,
Please download the relevent document from the below url :
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000075728&
Regards,
Santosh

Installation Solution Manager: R3load testconnct:ERROR

Just about to install Solution Manager 7.0 on a Linux SUSE with MaxDB.
Step IMPORT ABAP gives an error (in R3load.exe.log)
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20100401095047
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:39:36
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20100401095047
No idea what DBSL_CMD_IMP_FUNS_SET rc=20 could mean???
Any idea?

Hello Henrik,
This sounds like you are trying to install the license and getting this issue.
Please review SAP Note 359944
Please run 'saplicense -show' again under user <sid>adm, and make sure the version of saplicense, it is Release 640 or Release 4.5B
check db-library version run command 'disp+work -v', then you will see the kernel version and dbsl patch level
update if necessary:
If releases of SAPLICENSE and dbsl are different, eg. SAPLICENSE is 640, but your kernel is 4.5B, please goto Service Marketplace and update the executables.
Thanks,
Mark

B1DE Professional Installer Problems

I have created an installer solution using the wizard once and it worked, but after I've deleted it and trying use the wizard again, I'm getting the same error every time: "cannot add link because the \setup.exe doesn't exist". I think I'm doing something wrong, yet the wizard is so simple...
it seems that the wizard is trying to add the setup.exe as a resource to the main project and it fails, since the setup project is not complied yet (this is just what i think happens...)
Anyhow, the 'regular' installation wizard does work.
And another question. I want to creating user tables, fields and objects upon add-on installation, since the add-on uses these tables, fields and objects. Is there's a best-known method for that? It seems that the installer is already 'talking' to the SBO client, yet it doesn't 'know' which company is currently in use in the client. I guess I would have to insert code that would connect to SBO UI and DI as I do in my addon, to add the user tables, fields and objects by code.
Thanks,
Avi

Hi Avi,
Have you checked if your Setup project is compiled and an exe generated in the bin directory? If you have the setup.exe generated please check if the case of setup.exe is the same one in the main project. If not just remove the setup.exe from the main project and add it one more time pointing to yours (don't forget to set its properties as Embedded resource).
But if you have any problem with the professional you can use the simple one as you sai.
Regarding UDTs the Setup doesn't create them and it doesn't connect neither to B1 during the setup. Usually the tables creation is done the first time the addon runs, the addon will check it everytime it is started to avoid problems.
Hope it helps
Trinidad.

Design Exercise - LAN Solution

I have an opportunity to gain employment with a network consulting firm. Part of the process is to take some information that goes through a mock RFP and come up with a design. It is an excellent way for them to see what I have to offer given all the channels available in coming up with a design. I believe in the process of collaboratoin and was hoping I could engage some willing individuals to work with me in creating a design for a LAN Solution, Wireless Solution and WAN solutions. I have until next Wednesday to put something together for a presentation next Thursday. So if you like practicing your design skills and would like to work with me on this excercise, I would greatly appreciate it.
The purpose of the excercise is not overerly technical in nature, but more high level. Here is the scenario:
Overview
The Widget International Group (WIG) is a prominent organization in the Upstate New York market. The WIG is looking to expand to a new regional office and build a new network. The network shall consist of high-availability, layer-3 routing, redundant, and fault-tolerant network equipment. Applications such as Voice over IP, Video over IP, WLAN, Voice over WLAN and possibly other leading edge applications may be utilized and, therefore, must be accounted for in this solution. The solution shall permit LAN segmentation via VLAN’s, and support VRF’s to avoid spanning tree issues. The solution shall support software modularity, to allow the switch software to be upgraded or downgraded with no service disruption, provide protected memory space for critical processes, and enable processes to be restarted independently of one another. Careful planning should be done to ensure that the WIG network has the flexibility to accommodate future applications. In addition to the solution parameters set forth in the following paragraphs, WIG would like the Contractor to review the overall functional requirements of the RFP and, coupled with the Contractor’s prior project experience, make recommendations on equipment and network configurations that may be overlooked in this document. All recommendations that are outside the requirements set forth herein, but may be of interest to WIG, shall be provided as an alternate solution and price. A separate Bid Form should be provided for each alternate solution and the Contractor shall state in their proposal which solution is most recommended for WIG and the reasons why.
The Contractor will be responsible for providing a turnkey design and installation solution based upon the parameters described. The design effort required at a minimum will include, but not be limited to:
Logical Network design presentation
Physical Network design presentation identifying all components to be sourced by Contractor or furnished by owner.
Description of diversity, redundancy and security aspects intrinsic to the design.
Identification of any impact the new design will have on existing environment configurations (i.e. redefining IP schemes). If it is prudent for WIG to make adjustments to their IP Schemes in their existing environment, then they will require support for this also.
Support for Open System Standards - The solution should be support open system industry standards, such as H.323, 802.1p and 802.1q, MGCP, SIP, TAPI, JTAPI, IPV4, IPV6, etc.
System Administration - Maximum flexibility for rapid, efficient, and cost-effective configuration changes, affecting personnel and associated IP telephone equipment through a standard browser-based interface.
LAN SOLUTION PARAMETERS
The complete data network core shall consist of two (2) chassis-based switches with redundant power supplies, two (2) supervisor-engines/CPU modules per switch and the appropriate quantity of line cards to support 10GB fiber uplinks to the edge switches in four (4) IDF closets. Uplink quantities are outlined in table 1 below. Core switches shall connect redundantly between each other, to the WAN equipment, as well as the edge switches in the respective TC’s. All 10GB uplinks shall be non-blocking. Edge switches shall be located in the TC’s in sizes and quantities required to support the number of users in that particular area. WIG desires a stackable edge switch.
There area total of 200 users.
10 Servers with basic services such as email, HR applications - CRM, and Active directory.

Hi Mheick,
since this is part of a hiring process, I don't believe this is the proper forum to ask for assistance. The potential employer wants to know what you would do.
Collaboration and team work are very important elements in the work environment but not for job placement. However, researching on the web or this forum to find useful information is all you need to do to develop your own solution.
And, if a company is expecting this as part of the hiring process, expect to be grilled over your RFP - if you can't validate your RFP and defend your choices .........
Best of luck. Regards,
Steve

Installation Solution

Similar Messages

Maybe you are looking for