Installation sous mac OS X 10.5.8

Le logiciel adobe photolightroom version 4 acheté avec appareil photo leica, ne s'installe pas sous cette version mac.Si une personne connait une solution à ce problème je la remercie d'avance. Cordialement.

I've downloaded it twice. One copy says 479,695,704 bytes and the other one says 550,549,808 bytes so it must have problems downloading correctly.
Now that you mention it, each time I downloaded it the download failed at some point, but I used Firefox's Download window to restart the download. That must be where the error is.
I'll try again and let you know what happens.

Similar Messages

INSTALLATION CS6 MAC OS 10.7

Bonjour,
Il m'est impossible de procéder l'installation de CS6 sous Mac OS 10.7.5
Le disque d'installation est évacuer avant la fin de l'installation.
Que faire ?
Merci

Download and install instead of using the disc. Use the disc serial number to activate.
Download CS6 products

Faire reconnaitre mon scanner par photoshop sous mac

Bonjour,
je viens d'acquérir une imprimante mutlifonction officejet 7612, et j'aimerais pouvoir utiliser le scanner sous photoshop CS4 et CS5.
j'ai bien installer le plugin twain je possède deja un simple scanner Canon qui lui est reconnu, CS4 ni le CS5 ne le reconnait, j'ai épuisé mon modeste savoir faire en la matière, sachant que via le logiciel HP scan tout fonctionne, je sui sous mac os 10.9
si quelqu'un a la solution je lui en serais éternellement reconnaissant!

Hi
If this is truly a G5 Mac and you've not confused it with similar looking Intel Hardware then as far as I know you can't install 10.6 on a G5 Mac. What version of the OS exactly is installed on the G5?
Assuming I've understood you correctly You can't use 10.6 SIU to create NetBoot Images of an operating system prior to 10.6. To create an nbi of a 10.5 System you would need 10.5 SIU installed on a 10.5 Server or Client OS. Once the NetBoot Image has been created you can 'serve' the image from 10.6 Server's NetBoot Service.
HTH?
Tony

Windows 8.1 Installation On Mac - Got a Problem

Windows 8.1 Installation On Mac - Got a Problem
Hi everyone,
I'v researched a lot about installing Win on Mac but I still got a problem when everything seems to be fine.
I got a Macbook Pro Retina, Late 2013 with OSX Mavericks and Bootcamp 5 installed on. And for installing windows, I already got an empty 8GB USB Drive formatted as MS-DOS (FAT32). And I've prepared Windows 8.1 ISO in my Downloads folder.
During my last effort, I opened Bootcamp Assist and then Chose the options: "Create Windows 7 or later version installation disk" and "Download the latest windows support software from Apple". Then I chose my Windows 8.1 ISO location and my destination. When it finished ,I was expecting it to run windows setup. But it closed and nothing happened
When I opened BootCamp again, only the first two options were available as before and "Install or remove Windows 7 or later" wasn't.
Now ,what do I have to do exactly? (NOTE: I'm not a professional. So please answer in a simple way. )
Should I restart the Mac and Hold OPTION while booting to run Windows setup? I was thinking about it but I thought I might screw it up all. So I decided to ask it here to be sure.
Any help will be appreciated by heart!

Hi Alcatrax,
I would recommend following the steps in this link in order to help you complete your installation of Boot Camp:
Boot Camp Help: Install Windows on your Mac
https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
Prepare your Mac for Windows
Boot Camp Assistant helps prepare your Mac for Windows by creating a new partition for Windows and then starting the Windows installer. Optionally, you can install Windows using an external USB drive that contains a Windows ISO image downloaded from Microsoft and Windows support software.
Important: If you’re using a portable computer, connect the power adapter before continuing.
Insert an external drive into the USB port on your Mac and keep it inserted while you install Windows and Windows support software.
Open Boot Camp Assistant, located in the Other folder in Launchpad.
Select the option to install Windows, select other options you need, then click Continue.
Here are the other options you can choose:
If you want to install Windows from an external USB drive and you have a Windows ISO image, select the option to copy the image to an external USB drive. If this option isn’t available, your Mac doesn’t support installing Windows from an external USB drive.
If you haven’t already downloaded the Windows support software for your Mac, select the option to download it. In a later step, you’ll install the Windows support software on your Windows partition.
Follow the onscreen instructions for the options you selected.
When you’re asked to create a Windows partition, specify a partition size. If you have multiple hard drives in your computer, you can select a different hard drive and create a single partition on that drive, so that the drive is solely used for Windows.
Note: You can’t resize the partition later.
If you need help determining the best size for your Windows partition, refer to your Windows installer documentation. For Windows 8, create a partition that is at least 30 GB.
In a later step, you’ll format the Windows partition.
If you are using an installation disc for the 64-bit version of Windows, insert it into the optical drive in your Mac or the external optical drive. Otherwise, keep the external USB drive with the 64-bit version of Windows inserted.
Click Install.
Boot Camp Assistant creates the Windows partition, restarts your Mac, then opens the Windows installer.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Installation on Mac was a mess

I am receiving messages every day encouraging me to update Thunderbird on my Mac but I'm really concerned to do it. A few weeks ago I did indeed do an update (31.3.0) and it was such a stuffup that I'm currently very wary of any new ones. The problem on the last update was that it wouldn't download emails (hello!) and it took me two full days to sort out, basically trashing the new update and installing an older one, then tweaking it to get me email archives back. Has anyone done the latest 31.4.0 installation on Mac and not been screwed up?

20 Million people dd the upgrade V2 to V3 a few had a problem, asking if anyone else has done an upgrade successfully is akin to asking if anyone else breaths. Yes they have, and no they had no issues. Does that do anything for you. No it does not.
Does the Yosemite update work for everyone? No it does not.
The past issue you describe sounds like an anti virus/ Firewall issue. Unfortunately I do not have a crystal ball to look into your past to determine what the issue was, but all I can say almost certainly is that as you never determined what the issue was you have not fixed it. v Next update you do the issue will return, and no fault of the software.

Impression impossible avec PhotoShop CS5 sous Mac OS 10. 7. 5

bonjour, je n'arrive pas à imprimer à partir de Photoshop CS 5 sous Mac OS X. 7. 5.
Et cela aussi bien sur mon Mac pro, que sur mon MacBook pro, et quel que soit l'imprimante connectée.
Quelqu'un a-t-il rencontré ce problème ?
Merci

Good day!
Maybe you should also ask over at
http://forums.adobe.com/community/international_forums/francais
if you prefer posting in French.
Regards,
Pfaffenbichler

Can't run sidecar AIR installer on Mac OS X from UDF 1.0.2 image

I'm experiencing another AIR installer issue, this time trying to run an AIR 2.5 sidecar installer for Mac OS X that is placed on a UDF 1.0.2 image (created with Toast 10).
The error in the Console when double-clicking the installer.app is:
udf error: errno_t UDFFileNode::ReadPathComponent(uint8_t*, off_t*, bool*): Incomplete path component
Occasionally, I get additional errors reported from AIR:
([0x0-0x223223].com.adobe.air.Installer[10852]) Exited with exit code: 4
Trying to run the installer in Terminal:
sudo dtruss /Volumes/UDFImage/mine.app/Contents/MacOS/Adobe\ AIR\ Installer
results in:
dtrace: failed to execute /Volumes/mine/mine.app/Contents/MacOS/Adobe: file is set-id or unreadable [Note: the '-c' option requires a full pathname to the file]
It seems there is some undesired path truncation occurring.
So these errors seem to be path related, and stem from a difficulty running the actual Adobe AIR Installer binary in the sidecar application package (in the bundle at /Contents/MacOS/Adobe AIR Installer. This application installer runs fine from hard drive, I know I've built it properly. It just fails when run on Mac OS X (10.6.4) from a UDF 1.0.2 image. The same image contains a Windows version of the installer which installs fine on Windows XP in my testing.
Is there a known issue with AIR on this?

Hello,
There is a problem with UDF file systems found on DVDs and symbolic links braking. The Adobe AIR installer bundle makes use of a few symbolic links, so this might be related. Could you try navigating from Finder into the installer bundle to this directory:
Select one of the symbolic links and try to resolve it by pressing Cmd + R? Does it resolve to the correct file?
This issue was fixed in Toast 10 Titanium with version 10.0.6. It still exists with Apple's built in tools. When using Disk Utility or the command line hdutil the symbolic link will remain broken.
Thanks,
Chris

Error encounded during oracle 10g installation on mac os 10x

Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
     at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
     at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
Vijayaprakash

Duplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini

Do i need to backup my information before installation of Mac os x lion? I know I should always back up, but what i'm asking is will my information be there, or is it a totally clean install? Will my information have to be transfered?

Do i need to backup my information before installation of Mac os x lion? I know I should always back up, but what i'm asking is will my information be there, or is it a totally clean install? Will my information have to be transfered?

When I installed Lion all of my files were intact and where I left them, and I did not back up my Mac, however having seen some of the problems some people are coming across when installing Lion I would recommend backing up before you install (just to be on the safe side).
Hope this helps!

Creative Cloud Installer ダウンロードが最後まで行かない.キャンセルもできません.Mac OS10.6.8

Creative Cloud Installer ダウンロードが最後まで行かない。
キャンセルもできません。
しばらくapplicationのアップデートをしていませんでした。
Mac OS10.6.8です。

CreativeCloudの必要システム構成はMac OS X v10.7、v10.8、v10.9 または v10.10 日本語版となっていました。
ダウンロードがうまくいかないのも構成外だからかもしれないですね…。
10.6.8ではCreativeCloudの代わりにApplicationManagerを使いますー。
どんな理由でCreativeCloudをインストールされようとしているのかわかりませんが
…ApplicationManagerなら↓からダウンロードできますよ！
Adobe - Adobe Application Manager：Adobe Application Manager：Thank You

Help with Adobe Reader update installation on mac book pro

am trying to update adobe reader 9.4.6 to the latest version on my mac book pro. Am able to download the updtae to 10. whatever and proceed with installation. At the step where I am asked to choose the adobe reader file, I select the file and then the process stops and I get a message that installation has failed and i am to contact the software manufacturer.

I figured it out. Thanks!
The key, during both life and death, is to recognize illusions as illusions, projections as projections, and fantasies as fantasies. In this way we become free.
Date: Mon, 10 Sep 2012 04:54:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with Adobe Reader update installation on mac book pro
    Re: Help with Adobe Reader update installation on mac book pro
    created by Nikhil.Gupta in Adobe Reader - View the full discussion
How exactly are you trying to update your Adobe Reader 9.4.6Try the following link to download latest Adobe Raeader: http://get.adobe.com/reader/
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4686315#4686315
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4686315#4686315. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

IPhoto recently after installation of Mac OS X 10.8

how do i bring back the i life applications which disappeaared after installation of mac osx 10.8 and doesnt accepted on the appsotre( cost money)

You bring back iLife in one of two ways:
1. Open the App Store, click on "Purchases". If you find GarageBand, iMovie and iPhoto there, you can click "Download". I think you tried to say above they are not there, but I'm just making sure.
2. Use your iLife '09 CD to reload the applications, then do a "Software Update".

Objet: paramètrage imprimante Canon sous Mac OS.X

Objet: paramètage imprimante sous Mac OS.X
Imprimante Canon MX850
Bonjour,
Je suis passé de Photoshop Element 7 version PC a PSE9 version Mac.
Sous Windows il était possible de paramètrer complètement l’imprimante: type de papier, impression avec ou sans bordure, etc., etc....
Sous Mac OS, presque plus aucun réglages et une qualité d’impression désastreuse.
Est-ce due a des limitations de PSE9 version Mac, ou bien aux drivers version Mac de l’imprimante Canon?
Merci de votre aide.

Pose questions in this Forum in English please or refer to http://forums.adobe.com/community/international_forums/francais
In case you are talking about Elements there is a Forum for that program specifically.

Impossible de lancer Logic Express 9 sous MAC OS X 10.7.4

J'ai installé LOGIC EXPRESS 9 sous Mac OS X Lion 10.7.4 (11E53) mais lorsque je lance le logiciel, un message d'erreur s'affiche " impossible d'ouvrir cette version de l'application Logic express avec cette version de Mac OS X"..dois-je mettre à jour Logic Express 9?

Hi, sorry I do not speak your language...
but you need this Version of Logic Express 9 for Lion...
http://support.apple.com/kb/DL1015
Be Sure to Restart your computer after the successful install...
Cheers.

Installation sous mac OS X 10.5.8

Similar Messages

Maybe you are looking for