Installation stop at check DDIC password.
Hello everybody,
I am trying to install the IDES SR3 on windows (x64) and oracle.
but my installation is stop on the Check DDIC password phase.
I can log on using the user name DDIC and password 19920607.
So please suggest me How to solve the problem and continu
with the installation.
Thanks
Ganesh
HI,
NOw I have strange problem, I am able to log on frist time by using the standard DDIC password,
but after that I am unable to Logon.
Second thing, SAP MMC is shown in green color, when I am trying to log on by SAP logon pad
it does not show the SAP logon screen. I have been wait from last 30 Min
but till I am not get the SAP logon screen
At my PC two IP one for Loopback adpater second is the network IP
I am trying by using both but till not get sap logon screen
Also when I check the SAP MMC workprocess continuosly read the table REPORTEXT.
Please suggest me How to get the sap logon screen?
what may be problem?
Thanks
Ganesh
Similar Messages
-
"System copy stops in "check DDIC password" step
Hi,
We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
But at the end of import ( using R3load tool ), the import stops at "check DDIC password" step with error message :
"Test logon to SAP System D12 failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
"Programm SAPMS380 not found"
If any one could help
thank you
Pascal
file sapinst_dev.log :
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
CLoginTimeout::run()
Login in progress
TRACE 2008-10-06 12:13:39.460
Connection request to guiengine backend by host 10.90.150.140
TRACE 2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2008-10-06 12:13:39.522
Protocol version is 3.1
TRACE 2008-10-06 12:13:39.522
Send connect information
TRACE 2008-10-06 12:13:39.522
client logged on
TRACE 2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2008-10-06 12:14:03.147 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
INFO 2008-10-06 12:14:03.147 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:05.522
current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
INFO 2008-10-06 12:14:05.522 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-10-06 12:14:05.522 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\x.
TRACE 2008-10-06 12:14:06.553
Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:14:06.741
Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
TRACE 2008-10-06 12:14:06.881
Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
TRACE 2008-10-06 12:14:07.194 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
INFO 2008-10-06 12:14:07.209 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
TRACE 2008-10-06 12:14:08.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
INFO 2008-10-06 12:14:08.725 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
TRACE 2008-10-06 12:14:17.928
SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
TRACE 2008-10-06 12:14:17.928
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
TRACE 2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
TRACE 2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
TRACE 2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
WARNING 2008-10-06 12:14:18.162 [synxcpath.cpp:912]
CSyPath::getOSNodeType(bool )
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
TRACE 2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
TRACE 2008-10-06 12:14:18.225
This is SAPinst, version 701, make variant 700_REL, build 967243
compiled on Mar 7 2008, 01:01:19
TRACE 2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
CSyADsPath::fromString(ONEPNET\d12adm)
Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
TRACE 2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
TRACE 2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
CSyUserImpl::isExistingOnOS()
existence check for user d12adm returned true.
TRACE 2008-10-06 12:14:20.678 [syxxccache.cpp:208]
CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
= C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
= G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
= J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\d12adm\Application Data
CLIENTNAME = TAL-MOBILE
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
COMPUTERNAME = SAPRH-PROD1
ComSpec = C:\WINDOWS\system32\cmd.exe
DBMS_TYPE = ora
dbs_ora_schema = SAPSR3
dbs_ora_tnsname = D12
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\d12adm
JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
LOGONSERVER =
CDBOUREGREG
NLS_LANG = AMERICAN_AMERICA.UTF8
NUMBER_OF_PROCESSORS = 8
ORACLE_HOME = D:\oracle\D12\102
ORACLE_SID = D12
OS = Windows_NT
Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0f0b
ProgramFiles = C:\Program Files
ProgramFiles(x86) = C:\Program Files (x86)
SAPDATA_HOME = I:\oracle\D12
SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
SAPLOCALHOST = saprh-prod1
SAPSYSTEMNAME = D12
SESSIONNAME = RDP-Tcp#1
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = G:\usr\sap\D12\tmp\1
TMP = G:\usr\sap\D12\tmp\1
TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
USERDNSDOMAIN = ONEPNET.INTRA
USERDOMAIN = ONEPNET
USERNAME = d12adm
USERPROFILE = C:\Documents and Settings\d12adm
windir = C:\WINDOWS
User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
RAM size (MB): 12287
Swap size (MB): 21708.6
TRACE 2008-10-06 12:14:20.709
Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
TRACE 2008-10-06 12:14:20.709
Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
TRACE 2008-10-06 12:14:20.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
INFO 2008-10-06 12:14:20.709 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
INFO 2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
TRACE 2008-10-06 12:14:29.428
Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
TRACE 2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
TRACE 2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
TRACE 2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:29.584
Call block:W2K_ServicePack_Check_ind_ind_ind_ind
function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
is validator: false
TRACE 2008-10-06 12:14:29.834
Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
TRACE 2008-10-06 12:14:29.991 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
INFO 2008-10-06 12:14:29.991 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
TRACE 2008-10-06 12:14:30.131 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
INFO 2008-10-06 12:14:30.147 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
INFO 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
TRACE 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
TRACE 2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:30.272
Call block:NW_DDIC_Password_ind_ind_ind_ind
function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
is validator: false
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstanceInstall.find(
function (instance) {
return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NW()
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NW() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall.getSystem() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers(D12)
TRACE 2008-10-06 12:14:30.319
t_NW_users.updateRow(, WHERE sid='D12'), updating
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
TRACE 2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
Environment variable SAPPARAM700 set to value '1'.
TRACE 2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
CIaIcmAuth::traceInit()
Initialized SAP trace: tf is now set.
INFO 2008-10-06 12:14:30.412 [synxccuren.cpp:65]
CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
Removed environment variable SAPPARAM700 from current process environment.
TRACE 2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
CIaSAPParam::initializeDefaultValues_impl()
Read default profile values from kernel.
TRACE 2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
TRACE 2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
ACTION_CANCEL requested
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point<br>Note:<br>If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-10-06 12:44:41.840 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2008-10-06 12:44:42.074 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.Hi,
The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login as DDIC user and set the password permannetly and retry the activity.
If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword as "PASS" and logon and reset the user DDIC.
Regards. -
Netweaver 2004s BI installation stuck in "check ddic password"
Hello
iam installing netweaver 2004s BI .The installation is stuck on phase 27 of 95 " check ddic password " .
i have tried with the master password as well as ddic standard password ,but still it is not continuing.
could any body help me in doing so.
ESWAR.Hi,
While doing the system copy I am getting the similar error like "Test logon to SAP system <sid> failed. Make sure that the user DDIC exists and that the password of the user DDIC is correct". I tried to login to the system with the users DDIC and SAP* but it is giving the error "DB-error - 0" in the bottom of the screen.
I have included the parameter login/no_login_sapstar=0 in the instance profile and restarted the instance. Now I am able to login to all the clients with SAP* user id with the password 'pass' and changed the password of the user DDIC to its default. I tried to login to the system, but still the same error. I tried to continue the installation but still it is showing the same error message "Test logon to SAP system <sid> failed. Make sure that the user DDIC exists and that the password of the user DDIC is correct".
Could you please suggest me the solution for this issue.
Thanks in Advance.
Kind regards,
Mogileeswar -
Installation error at CHECK DDIC PASSWORD
Hi,
I am installation SAP ECC on MSCS. my installation till enqueue replication server went well but when i install the CI instace on node A it throws me out at CHECK PASSWORD STEP. the log is below please suggest.
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:215]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.762 NWDialogInstance.getRFCUser(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.762 NWUsers.getAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.762 NWUsers.haveAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.777 NWUsers.haveAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.777 NWUsers._readAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.777 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._isSystemRead() done: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._readAccountData() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers.getMasterPassword()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers.getAccountData():
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWDialogInstance.getRFCUser() done
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value node1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 01.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Password logon no longer possible - too many failed attempts
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value node1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 01.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Password logon no longer possible - too many failed attempts
TRACE [iaxxbjsmod.cpp:657]
CJSlibModule::showOkCancelBox_impl()
<html>Test logon to SAP System AP0 failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:83]
doHandleDoc()
ACTION_CANCEL requested
TRACE [iaxxcnclhd.cpp:657]
doHandleDoc()
<html><head></head><body> You are about to cancel the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b> installation.<li>Choose one of the following:</li><ul> <li>Continue - to continue the installation.</li> <li>Stop - to stop the installation and exit SAPinst. You can continue the installation later from this point.</li></ul>Notes:<ul> <li> If you stop the installation after the installation activities had started, do not use the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b>, as it is not ready to be used.</li></ul></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
please let me know is there anything worng am doing or more info on this error.
its urgent and help on this is apperocated
Cheers
ArunHi Everyone,
The error is related to Kernel, Just get rid of all this and try updating the kernel to the latest one.
The db error is not seen again at the step where the installation was stopped.
Also, this error is at the step of updtaing sapview.tsk when you use wrong kernel & this get conflicted to the DB which is of not the version to be. So simple if your DBload step is in sucess & kernel is outdated sync to the lates one.
Then reatart the Sapmmc, login with SAP*- 06071992 & DDIC - 19920706, hope u know the rest:>
Rate the forum
Thanks & Regards,
Chetan Poojary. -
Hi guys,
During installation at phase 27 i received msg check ddic password .. i clicked on ok.. and installation continued..but now when i try to login using SAP* or DDIC it is not accepting.
how to solve it..!!Hi,
did you use default passwords
DDIC - 19920706
SAP* - 07071992
Please look at this
[Re: Check DDIC Password;
[http://sap.ittoolbox.com/groups/technical-functional/sap-basis/check-ddic-password-2397340]
Regards,
Muralidhar -
Stuch at the step " Check DDIC password "
Hi,
I go for system export/ import throuh sapinst.
sap ecc 6.0
oracle
red hat linux
After making the export of system , then go for system import via .sapinst , I m stuck at step " Check DDIC password ".
Even I m not be able to logon to system through sapgui.
Following are the error logs :
*==> sapinstdev.log <==*_
TRACE [iaxxbjsmod.cpp:719]
CJSlibModule::showOkCancelBox_impl()
<html>Test logon to SAP System REQ failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
sapinst_dev.log
>TS> Tue Apr 13 11:50:18 2010
T:46912508454944 Error in program 'sapinstexe': ======> A:SY:002 Program SAPMSSY1 n
>TS> Tue Apr 13 12:14:44 2010
T:46912508454944 Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=isrecqa, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '172.25.0.94:3300' not reached
TIME Tue Apr 13 12:14:44 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 14
T:46912508454944 Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=isrecqa, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '172.25.0.94:3300' not reached
TIME Tue Apr 13 12:14:44 2010
RELEASE 700
COMPONENT NI (network interface)
Thanx,
AmitHi,
We are running on Linux plateform, below is the required log ...
isrecqa:reqadm 4> cat dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid REQ
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7000
patchlevel 0
patchno 236
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 24877
Tue Apr 13 18:46:57 2010
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 24877) [dpxxdisp.c 1287]
shared lib "dw_xml.so" version 236 successfully loaded
shared lib "dw_xtc.so" version 236 successfully loaded
shared lib "dw_stl.so" version 236 successfully loaded
shared lib "dw_gui.so" version 236 successfully loaded
shared lib "dw_mdm.so" version 236 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Apr 13 18:47:17 2010
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0029.qqq.nxst) took 20 seconds
Tue Apr 13 18:47:27 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 10 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >isrecqa_REQ_00 <
DpShMCreate: sizeof(wp_adm) 22776 (1752)
DpShMCreate: sizeof(tm_adm) 6009216 (29896)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x2aaab589d000, size: 6704576)
DpShMCreate: allocated sys_adm at 0x2aaab589d000
DpShMCreate: allocated wp_adm at 0x2aaab589f310
DpShMCreate: allocated tm_adm_list at 0x2aaab58a4c08
DpShMCreate: allocated tm_adm at 0x2aaab58a4c68
DpShMCreate: allocated wp_ca_adm at 0x2aaab5e5fde8
DpShMCreate: allocated appc_ca_adm at 0x2aaab5e66e68
DpShMCreate: allocated comm_adm at 0x2aaab5e693e8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x2aaab5eef0c8
DpShMCreate: allocated gw_adm at 0x2aaab5eef148
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x2aaab5eef178
DpShMCreate: allocated wall_adm at 0x2aaab5eef180
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 232 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 57 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Tue Apr 13 18:47:30 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( isrecqa) [dpxxdisp.c 12650]
DpStartStopMsg: send start message (myname is >isrecqa_REQ_00 <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 16383 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Apr 13 18:47:31 2010
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 236
Release check o.K.
Tue Apr 13 18:47:32 2010
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
isrecqa:reqadm 5>
Regards,
Mushtaq -
when i was presented with the screen of DDIC password, i wrote the wrong one, so i now i have a mess with my passwords.
I can access to the 000 client with SAP* and DDIC, the both of them are reseted to the default passwords, but i can't log on to the 001 client, the both users (SAP* and DDIC) are locked, so i can't enter the sistem to reset them.
Anyway, now i restart the installation and have this error:
"Test logon to SAP System ALH failed.
Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
The sistem is running, both cients are in green!
I tried to run the reports RSWBOINS and RADDBDIF as some guys on thi forum suggested, but no luck
Any ideas??Go to database level and reset the password for SAP* for client 001
update <DB schema>.USR02 set UFLAG = 0 where MANDT = <client number> and BNAME = u2018SAP*u2019;
With the above query you can unlock SAP* and if you know the password you are able to logon to that client.
if still you do not able to logon to that client
delete the User SAP* with below query
delete from <DB schema>.USR02 where bname like 'SAP*' and MANDT like '001'
than you can able to logon to that client with SAP* and use default password "pass".
after that you can change the password for DDIC from SU01.
This will help you. -
Error with install Solution manager on step: check DDIC password.
Iu2019m installing SAP Solution Manager 7.0. ABAP and JAVA instance. OC SLES 10.2. БД Oracle 10.2, update 10.2.0.4. At step 28 out error:
Test logon to SAP System UST failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
Error of sapinst_dev.6.log
WARNING[E] 2010-07-01 11:30:00.166 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
DB-Error - 0
Error of /usr/sap/UST/DVEBMGS03/work/dev_rfc.trc
u2026.
ERROR file opened at 20100701 124301 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
I have tried to change password DDIC at 19920706. Error could not be fixed. In the SAP GUI can connect SAP *. When Iu2019m trying to connect DDIC out DB-Error u2013 0.suse102:/usr/sap/UST/DVEBMGS03/work # cat dev_rfc.trc
ERROR file opened at 20060102 052456 YEKT, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
TIME Mon Jan 2 05:24:56 2006
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 2
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
TIME Mon Jan 2 05:24:56 2006
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 4
ERROR file opened at 20100706 142541 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR service '/tmp/.sapstream40300' in use
TIME Tue Jul 6 14:25:41 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -4
MODULE nixxi.cpp
LINE 3148
DETAIL NiIBindSocket: could not delete file '/tmp/.sapstream40300'
for hdl 2
SYSTEM CALL unlink
ERRNO 1
ERRNO TEXT Operation not permitted
COUNTER 4
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
TIME Tue Jul 6 14:25:41 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 6 -
DDIC Password fails in middle of Solution Manager Installation
I'm performing a new install of Solution Manager 7.0 (4.0) on HPUX IA64 11.23. This is a brand new Landscape. The installation has halted at phase 29/47 "Check DDIC password", and reports the error:
Test login to SAP System SMA failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
From the SAPGUI 7.10., I was unable to login as DDIC or SAP. I used the master passwords given in the install. I also tried the default passwords as mention in another thread password '19920706' for DDIC and '06071992' for SAP.
I was able to login with SAP* password PASS after adding login/no_automatic_user_sapstar=0
to the default profile and restarting SAP, but was unable to change the DDIC password because change and transport system not configured.
How do I get past this point in the installation process?This problem is now resolved. The problems of:
1) The "Check DDIC password" phase of sapinst of SM 7.0 was failing with DB-Error 0.
Fix: Install latest kernel patch. Problem was fixed with NW 7.0 kernel patch 133. I installed kernel patch 159. The kernel patch had to be installed via the old method of using SAPCAR to untar the files, backup kernel dir, shutdown sap, and copy files over to kernel dir. See note 19466.
2) The Warning messages
WARNING => IcmJ2EEScheduleFunc: Cannot
access "/sap/public/icman" -
please check node in TA sicf [icxxman_mt.c 2206]
was resolved by TA SICF by SERVICE HOST -> active
to activate the complete default_host subtree. -
Guyz,
i installed nw04s system with AS ABAPBI JAVAEP+EPC on MS SQL server ....its IDES software btw...
everything went fine till 'Import ABAP' and even 'Running ABAP Reports' proces.... but while running the process 'Check DDIC Password', it popped a window with OK and Cancel saying that
test logon to SAP system SID failed .Make sure that the system is started that the user DDIC exists and the password of user DDCI is correct
I dont udnerstand why it would fail to logon to DDIC on client 000.... becoz i set the master password and SAPInst should remember the password in some encrypted form and use the same for logging .!!!!
anyways after this error, i started SAPMMC and logged into the system and tried DDIC in 000, 001 with master password and default password (19920706) as well with no luck...but worked fine in client 800 with my master password....
What should i do now ? any suggestions would be highly appreciated....
ThanksActually SAPInst is trying to connect to client 001 with DDIC...so I deleted SAP* from 001 client in sqlplus and restarted the server and tried logging with ddic in 001 with my master password, PASS, pass, and even with 06071992 with no luck...
any other suggestions ?
Edited by: Kasu on Mar 27, 2008 5:18 PM -
IDES installation problem with DDIC password
Hello everybody,
After hours of searching and trying..
I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
Thanks in advance
Lenvy
Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
Edited by: Lenvy Gee on Sep 6, 2009 2:34 AMGood Morning everybody,
I started a next try, the mmc is running on green, the login starts up and......failed.
So the network setting seems to be correct.
The log files included following:
..........................................(just the last lines).............................
M
M *****************************************************************************
M *
M * LOCATION SAP-Server BASIS_A23_00 on host BASED (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 26 08:06:26 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
M ThIErrHandle: prv_action of W0: 0x8
M ThCallDbBreak: use db_sqlbreak
C CANCEL rejected, because there is no SQL statement active
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
M ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
M ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
M RmCleanUpResources3: no resources registered
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: ThrCoreInfo o.k.
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES YES NO 000 255 255 20401126 080533 BASIS
C Disconnecting from connection 0 ...
C Now I'm disconnected from SAP DB
B Disconnected from connection 0
B statistics db_con_commit (com_total=4, com_tx=0)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c 327]
M return from clean-up function ...
and:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid A23
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2928
Mon Nov 26 08:03:01 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 08:03:10 2040
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >BASIS_I23_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D800050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000D800050
DpShMCreate: allocated wp_adm at 000000000D802150
DpShMCreate: allocated tm_adm_list at 000000000D8083A0
DpShMCreate: allocated tm_adm at 000000000D808400
DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
DpShMCreate: allocated appc_ca_adm at 000000000DD72060
DpShMCreate: allocated comm_adm at 000000000DD73FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
DpShMCreate: allocated gw_adm at 000000000DDFACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DDFACE0
DpShMCreate: allocated wall_adm at 000000000DDFACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >BASIS_I23_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Nov 26 08:03:11 2040
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Nov 26 08:03:17 2040
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Nov 26 08:04:26 2040
SoftCancel request for T17 U18 M0 received from IC_MAN
SoftCancel request for T19 U20 M0 received from IC_MAN
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c 2496]
Mon Nov 26 08:04:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c 14532]
Mon Nov 26 08:04:31 2040
ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c 14532]
DpHdlDeadWp: restart wp (pid=3092) automatically
ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c 14532]
DpHdlDeadWp: restart wp (pid=3268) automatically
ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c 14532]
Mon Nov 26 08:04:45 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6971]
Mon Nov 26 08:05:10 2040
ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c 14532]
Mon Nov 26 08:05:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c 14532]
Mon Nov 26 08:05:33 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6971]
The kernel is not patched. I just (try) to install the kernel files from the sap market place
IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
How do I upgrade the kernel by having no .exe - file? May the installation go on after patching the kernel?
Thanks you really much
Lenvy -
EHP4 installation using EHPI : Error message: DDIC password does not work:
Dear All,
We are upgrating enhancement packages 4 using EHPI in 64 bit server. I am facing this error in Extraction phase , I have to provide DDIC / SAPServiceSID/ DB specific , next says ddic password is not correct. But when i tried to login with the same password into 000 client, it works. But when through EHPI , it throws error. Kidnly check the error and please suggest me ... Thanks in advance..
Error message: DDIC password does not work: RFC call to failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM DEST=R3D, GWHOST=SAPRBSBD-01, GWSERV=sapgw00, SYSNR=00 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner 'SAPRBSBD-01:3300' not reached TIME Thu Dec 24 12:27:13 200 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: 192.168.1.40:3300 SYSTEM CALL connect ERRNO 10051 ERRNO TEXT WSAENETUNREACH: Network is unreachabl.
Regards
RajDear Rajeev,
DDIC pwd for 001 is not same as 001,Will that be a problem ? But the Extraction requests for DDIC 000 client password. Are you sure UME comes into this scenario ?
@ Raghu - I have checked the link and it speaks about the resetting the EHPI. I dont want to reset and want to solve ddic password error.
Sorry if am wrong
@ Gerard,
Yes the hostname is SAPRBSBD-01.I am able telnet the IP 3300 and it works fine. FQDN SAPRBSBD-01.chen.local. The smicm service entries are with SAPRBSBD-01 but not with FQDN. Changing it to FQDN will help us to resolve the issue. Please suggest me.
Also the error refers to some RFC connection, any idea on that.
Thanks to all and looking for your valuable suggestions.
Raj -
Why is the installer stuck on "Checking System Profile-"?
I'm trying to install Flash Catalyst Beta on a MacBook Pro running OS 10.6.1 (Snow Leopard).
The installer starts to work, but then it stops at the point where it checks the system profile (see attached screenshot). It doesn't seem to have crashed as the dock icon allows me to quit without force quitting the application.
I've tried it in my regular user account and the administrator account, but the behaviour is identical.
Any help would be appreciated.I appreciate all your efforts, but I¹ve just received my new copy of CS5, so
I¹ll be installing the final version.
G
From: ritesh kapoor <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 29 Apr 2010 04:32:06 -0600
To: Gary Horsman <[email protected]>
Subject: Why is the installer stuck on "Checking System
Profile…"?
Thanks Gary.
I need to ask you a few questions and request you to perform some more steps
so that I can debug your problem.
1. Have you modified any folder permissions, authorization setup using
Keychain Access utility (or any other tool)?
2. Open a Terminal window, and run the command 'ls -l /tmp' and copy-paste
the output printed on your screen in your reply.
3. Delete all files whose name start with 'asu' in your /tmp folder. Run the
command 'rm -rf /tmp/asu*'. Restart your machine.
4. Launch the Flash Catalyst setup and check if installation proceeds
successfully. If it doesn't, proceed to the step below.
5. Open the folder containing the Flash Catalyst setup. Browse to the
'packages' folder and rename the file 'install.sig' to 'update.sig'. Double
click and launch the Flash Catalyst setup. This will not install the
application but install the Adobe Application Manager. Let me know if you
see a small dialog with a progress bar. Rename back update.sig to
install.sig. Update us your observations. Continue to next step.
6. Launch 'Disk Utility' app (from /Applications/Utilities). Select your OS
partition in the left panel and click on 'First Aid' tab on the top. Click
on the 'Repair Disk Permissions' button at the bottom.
7. Again, launch the Flash Catalyst setup and check if installation proceeds
successfully. If it doesn't, proceed to the step below.
8. Open a Terminal window and navigate to the directory containing the Flash
Catalyst setup. Run the command 'sudo Install.app/Contents/MacOS/Install'
and enter the password. Let me know if the installer launches and on
following the screen instructions do you still see the error screen or does
the installation proceed successfully. -
STARTSAP_NBAS DDIC password locking out
Guys,
We are doing 4.6c upgrade to ERP6 and during STARTSAP_NBAS phase DDIC locking out and cant start SAP original system. We tried to unlock the password and also did the reset using SAPup reset DDICpwd. But its still locking out.
When we tried to login to the system using GUI through DDIC we can login but when we try reset the password in SU01 we are getting syntax error " The data object "*USH02" does not have a component called "PASSCODE"."
Please help
Reward points will be awarded for helpful answers
Thanks
SantoshHi Santosh,
The problem is clear that the table USH02 is not updated during upgrade
so that it is not synchronized with table USR02. Please check table
USH02 and USR02 table in database level, compare the PASSCODE field in
both tables. (most probably there is no PASSCODE field for USH02 in db
level as well). If so, you could do the following:
1. Change the DDIC password to 19920706 at the table level:
update sapr3.usr02 set bcode='61D26428640DBAB5'
where bname='DDIC' and mandt='000';
2. Remove the lockflag
update sapr3.usr02 set uflag=0;
3. Change the DDIC password to 19920706 for the upgrade using:
SAPUp set ddicpwd
4. Then restart the system, and login again.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA -
Coldfusion 64 bit windows installer stops working after recent microsoft update
Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
before
lax.nl.current.vm=resource\\jre\\bin\\java.exe
after
lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
ByronHi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.
Maybe you are looking for
-
Streaming two or more flv videos at the same time
Hi, I am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page. When I publish the fla file it plays as intended. When I upload the swf file to the web only
-
Significance of ATG staging site, DS configuration and preview server
Am a newbie to ATG. Got a question. Please read through my understanding below and find the my questions at last. Correct me if my understanding is wrong as well. A typical staging enabled ATG will look like below (at basic level) as per my understan
-
Hi all! I'm sure this is something simple, but I just can't seem to get it and have been beating my head against a wall for several days...Help! :) I have a clob that contains the following: <?xml version="1.0"?> <PARMS> <P_BOOK_TYPE_CODE>ASSETS INTE
-
Poplist Blank Row issue in OAF on Advanced Search page in TCA
Hi All, i have created Poplist programmatically for various attributes on the Advanced Search Screen in OCO. We are able to search using the values in the poplist. When the Page renders, All the poplists have a Blank row in it. But as soon as we sea
-
Apache Error running constantly
How can I correct this error?: Could not open configuration file /Library/FileMaker Server/Admin/admin-helper/WEB-INF/conf/fmi-test.conf: No such file or directory I appreciate your help!