Installation Stuck in ABAP load phase due to MAXDB slow Performance
Hello,
We are installing ERP2005 on solaris 10 with MAXDB7.6 with build 35. During installtaion the Import ABAP phase stucks and running for a so long time. As per the note SAPNOTE :848436 we have been trying to execute the statment
CHECK TABLE "/MAXDB/INDEXSTATEMENTS" WITH LONG CHECK.
which may free up the load for installation.
But we are unable to execute the above SQL statement.
It is very urgent since we are not able to complete the installation from past 3 days....
Could you please some one able to help us to finish the installation. I am very
much greatful to you all..
Regards,
Sankaranarayanan.G
SAPBASISCONSULTANT
Hello Mona,
-> Please create next time your own thread, where your problem reported.
-> The SAP note 848436 is only released internally.
You now have to use the following installation guide:
Installation Guide - SAP NetWeaver 2004s <SR1 or SR2> <Technology> on
<your OS>: MaxDB
You can find this guide on SAP Service Marketplace at:
http://service.sap.com/installnw2004s > Installation - SAP NetWeaver
Systems > SAP NetWeaver 2004s <SR1 or SR2> - Installation Guides.
Also see the following SAP Notes:
919177 Inst. SAP NetWeaver 2004s SR1 Installation on UNIX: MaxDB
967741 Inst: SAP NW 2004s SR2 & SAP BS 2005 SR2 Inst. on UNIX: MaxDB
-> Please see the note 967741 & check the current value of the database parameter
SHAREDSQL.
-> Please clarify your last input in this thread:
"ran the above query using SAP<SID>, but it didn't change anything."
What query did you run?
"Ok... I increased values in SID_sapdb_db_parameter.txt and it worked."
What database parameters did you change?
Please review the SAP note::
814704 MaxDB Version 7.6 parameter settings for OLTP/BW
Thank you and best regards, Natalia Khlopina
Similar Messages
-
SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24
While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
I had finished upto 4 stpes . and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
Please Retry , View Log & Stop.
I am clicking Retry again it will be come same issue. Please Let me know.
Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"Still I am getting same problem in mine SAP ECC6.0 Installation.
In Abap Instance Phase 20 of 24. Error in ABAP Instance. I check the mmc.
Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
Still Going Installation for same Process.
Let me know. -
SAP installation stopped at ABAP load error: sql error '12537'
Hi ,
I am installing SAP ECC 6.0 with EHP4 and ABAP with Oracle 11G on AIX 6.1 load ended up with the error as below, please help
Import Monitor jobs: running 3, waiting 13, completed 9, failed 3, total 28.
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 10, failed 3, total 28.
Import Monitor jobs: running 3, waiting 12, completed 10, failed 3, total 28.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 12, completed 10, failed 4, total 28.
Loading of 'E071K' import package: OK
Import Monitor jobs: running 1, waiting 12, completed 11, failed 4, total 28.
Import Monitor jobs: running 2, waiting 11, completed 11, failed 4, total 28.
Import Monitor jobs: running 3, waiting 10, completed 11, failed 4, total 28.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 11, failed 5, total 28.
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 1, waiting 10, completed 12, failed 5, total 28.
Import Monitor jobs: running 2, waiting 9, completed 12, failed 5, total 28.
Import Monitor jobs: running 3, waiting 8, completed 12, failed 5, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 2, waiting 8, completed 12, failed 6, total 28.
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 1, waiting 8, completed 13, failed 6, total 28.
Import Monitor jobs: running 2, waiting 7, completed 13, failed 6, total 28.
Import Monitor jobs: running 3, waiting 6, completed 13, failed 6, total 28.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 2, waiting 6, completed 13, failed 7, total 28.
tail -20 SAPSSRC.log
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20111105170542
tail -20 FUPARAREF.log
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20111105170611Reasons can be many, you please check whether oracle and listener are up or not. Check 'R3trans -d' and trans.log
Similar problem thread -
error when applying PI_BASIS patch SAPKIPYM03 on ECC 6
Thanks -
ABAP MDM Connection Pool concept? Slow Performance in call
Hi,
I'm playing around with the MDM ABAP API, and I found the performance a bit disappointing.
I followed the guide "How To identify master data records using SAP MDM 5.5 ABAP API's" and wrote a test program.
The program makes a connection, triggers an MDM query, and disconnects.
CREATE OBJECT api
EXPORTING
iv_log_object_name = logical_object_name.
api->mo_accessor->connect( language ).
* Query parameters
ls_query-parameter_code = 'Material_Number'.
ls_query-operator = 'CS'.
ls_query-dimension_type = 1.
ls_query-constraint_type = 8.
ls_value = '70'.
GET REFERENCE OF ls_value INTO ls_query-value_low.
APPEND ls_query TO lt_query.
CLEAR ls_query.
* Search
CALL METHOD api->mo_core_service->query
EXPORTING
iv_object_type_code = 'Products'
it_query = lt_query
iv_hits_max = 10
IMPORTING
et_result_set = lt_result_set.
Connection is really fast (a split second)
First time triggered 'query' method took about 30-50 seconds.
Second time triggering 'query' method took a split second.
Further to my investigation, I found out the most expensive code lies in
CL_MDM_PROVIDER_SP04_PL03->IF_MDM_CORE_SERVICES~QUERY
*--- load field meta data ---*
IF mt_mdm_field_meta_data IS INITIAL
OR mt_field_meta_data IS INITIAL.
CALL METHOD me->_load_field_information.
ENDIF.
Within this method loadfield_information, it rips all the table and structure information
from MDM, and ALL language texts and so on.
It has many loops, and within the loops querying MDM for more information.
Is there anyway to speed this up?
Why aren't these data cached? (They don't change so often in a production environment)
I also found a shared memory class CL_MDM_METADATA_ACCESS but it is not used anywhere.
No shared memory area relevant is delivered by SAP as well.
Any ideas?
Cheers,
Michael.Hi Michael,
you're welcome.
I'm not sure how the Connection Pooling to MDM is really done by the ABAP APIs as I'm unfortunately not an API developer but just use the API for my programms.
What I learned during this process is that the repository meta data (meaning table descriptions, and so on) have to be loaded at least once for each connection. This makes sense because a repository can always be changed manually by any user. And I don't think that it would be faster to hold the meta data persistent in the ABAP layer because then you would need to compare the ABAP available meta information with the current meta information of the repository. This could take even longer.
I've solved this "issue" in a way that I really rely on the connection because a single connection is very stable. So I call the "CONNECT" only once in the very beginning, run through my coding and the very last step is the "DISCONNECT". As long as a connection is available, the meta data is cached in the API layer (at least this is the case for SP05).
BR Michael -
Installation stuck at Create database schema Phase 13 of 27
Hi
I am installing the Netweaver 7.01 SP3 and have already removed it completely after getting stuck at the same installation step. Do not know what is going wrong. A small extract of the log is shown below. Any advice on how to proceed will be helpful. I know when einstalling it has to be removed completely which I did using uninstallation and then clean up tool. But again it is stooping at the same step. I had let it run more almost two days but of no use. My system configuration is good enough with 2GB RAM etc.
INFO 2009-03-12 16:52:00.443 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb.
INFO 2009-03-12 16:52:00.458 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb\NSP.
INFO 2009-03-12 16:52:00.458 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb\NSP\saplog.
INFO 2009-03-12 16:52:00.474 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory E:\sapdb\NSP\sapdata.
INFO 2009-03-12 16:52:01.67 [sixxcstepexecute.cpp:790]
Execute step sdb_create_db_instance of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
File sapdb.inf does exist. Will use the commands in file sapdb.inf.
INFO 2009-03-12 16:52:06.544 [sixxcstepexecute.cpp:790]
Execute step sdb_init_instance_type of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
INFO 2009-03-12 17:12:38.722 [sixxcstepexecute.cpp:790]
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883 [sixxcstepexecute.cpp:790]
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
Also see log browser from the installation window............................
Please see below as it is geeting stuck at
component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
Mar 12, 2009 5:12:35 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component current="true"><![CDATA[Create users for SAP system]]></component><component current="true"><![CDATA[Install common system files]]></component><component current="true"><![CDATA[Unpack SAP archives]]></component><component current="true"><![CDATA[Install SAP Cryptographic component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="99" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:35 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst [Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="100" total="216"/>
<button sid="btPREV" default="false" enabled="false" >
vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component CDATA[Prepare database schema for ABAP]]></component><component current="true"><![CDATA[Create database schema]]></component><component ><![CDATA[Create sequence for the ABAP user]]></component><component ><![CDATA[Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="104" total="216"/>
[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:39 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><update><updateitem><dialogstatus><![CDATA[ ]]></dialogstatus></updateitem></update></sapinstgui>
Mar 12, 2009 5:38:16 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog severity="FLOW TRACE" filename="" version="1.0"/>
Mar 12, 2009 5:38:16 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstlog version="1.0" append="false" filename="C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\sapinst_dev.log"/>
Mar 12, 2009 5:43:59 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:08:17 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:30:31 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Thanks in advance
VikasGuess you are talking about sapinst.log file. Below are the last few lines after which it did not proceed
Do see the last step create DB schema....... The previos log was from sapinst_dev.log
Oliver I have a doubt could it be becuase of the host name.
The host name of my machine is "skumar278-1" with DNS domain name for SAP system "asiapac.globalcsc.net"
Could this be the reason for the problem i am facing i.e installation getting stuck at phase 13 Create DB schema.... Other than this I cannot see anything else which can go wrong.. Do have the DHCP server available..
The page file as per the ram settings i.e for 2 GB should be 3072 so I have set it to the same. Though
the prerequisite page shows
"For the selected services at least 7138 MB swap space are recommended. Current value: 2851 MB. (Updated 2005-06-24)"
Can this be the reason???
Also I just looked at the services file.. there are about about 4-5 different files with the name services .3 services.4 ... services.5 etc als there is no entry for port 3900 3600 & 8000.. .. do not know what to do... Please suggest..
INFO 2009-03-12 17:12:35.412
Execute step CheckDbExistence of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:35.726
Execute step check_dbm_dba_user_passwd of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:37.718
Execute step StartDb of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:38.722
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0 -
ABAP IMPORT phase is slow in ECC 6.0 installation on Solaris 10
Hi gurus,
I installed ECC 6.0 on Solaris 10 operating system and Oracle 10.2.0.2. I installed all solaris patces and Oracle interim patches before the installation. Firstly I added only 2 parameters in /etc/system file. This parameters like this: "set shmsys:shminfo_shmmax=0xffffffffffffffff" ,"set rlim_fd_cur=8192". Then I started the installation. When the system check the parameters I have medium warning about set shmsys:shminfo_shmmax=0xffffffffffffffff .After that I didn't restart the solaris machine and recheck the parameters.After I removed this parameter I didn't have any warning and I started the installation. Everything was ok. I don't have any error about installation. The processes are continueing but now ABAP import is very very slow. Only 5 processes finished from 38 in ABAP IMPORT phase in 14 hours. Is it normal? Why this step is very slow? What can I do to increase this step? If I add "set shmsys:shminfo_shmmax=0xffffffffffffffff" again when processes is running, does this step accelerate? If I change the /etc/system parameters do I have to restart the solaris machine? What can I do to resolve this problem?
Best regards,Hi Arif
<i>Only 5 processes finished from 38 in ABAP IMPORT phase in 14 hours. Is it normal?</i>
No, this is not normal. As far as i know, it is possible to set a parallel degree in sapinst. Of course this needs more hardware ressources. Did you do that?
To further diagnose your problem, you should check cpu and disk usage. It would be interesting which are the top processes running. Either your system is too slow, or some ressource is a bottleneck.
Regards
Michael -
SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE due to inactive object
Hi ,
SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE with the following errors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
REPACHK ERRORS and RETURN CODE in GET_INACTIVE_SAP_OBJECTS.SMG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ETG040 Start time.....: "17.06.2014" "00:13:43"
4 ETG039 -------------------------------------------------------------------------
4 ETG010 "533 inactive objects found" " " " " " "
4 ETG010 "257 inactive SAP objects" "colliding with import queue found." " " " "
4 ETG010 "Please contact the development team" "to either activate or discard the inactive object." " " " "
2EETG010 "The following objects are inactive" "in the system:" " " " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCDEF" " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCIMP" " "
2EETG010 "LIMU" "CINC" "/1WDA/CBUSINESS_GRAPHICS======CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_AC_CUSTOM_TEMPLATE=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_AC_MO_TEMPLATE=============CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPUB" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CINC" "CL_AC_TEMPLATE_REPOSITORY=====CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CINC" "CL_AI_SC_REFRESH==============CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_GENERIC_DATALOADER=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCDEF" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCMAC" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRO" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCDEF" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCIMP" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCMAC" " "
2EETG010 "LIMU" "CLSD" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRI" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRO" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPUB" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPRI" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRO" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPUB" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CLSD" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CLSD" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "CPUB" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM008" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM009" " "
2EETG010 "LIMU" "CLSD" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CLSD" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CPUB" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CLSD" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CPUB" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CLSD" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CLSD" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CLSD" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CLSD" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CLSD" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CLSD" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CLSD" "CX_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_CRM_CPY_PROCTYPE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPRI" "CL_ALRT_SELF_MON_LANDSCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPRI" "CL_E2EEFWK_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRI" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRI" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPRO" "CL_AC_ASSIGNMENT_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPRO" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRO" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CPUB" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPUB" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPUB" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPUB" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CPUB" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CPUB" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPUB" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPUB" "CX_E2E_DPC_SETUP" " "
2EETG010 "R3TR" "ENHO" "AGS_GET_JOB_DOC_ATTR" " "
2EETG010 "LIMU" "FUNC" "AGS_DSWP_SOLMAN_INFO" " "
2EETG010 "LIMU" "REPS" "LAGS_DSWP_REPORTING$01" " "
2EETG010 "LIMU" "FUNC" "AGS_SISE_MANU_NOTE_ACTS" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTIL$02" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTILF07" " "
2EETG010 "LIMU" "REPS" "SAPLAGS_SISE_UTIL" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_DB_UPDATER_REMOTE" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "FUNC" "SMD_DATA_LOADER_ALM" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$28" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADF01" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADU32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADV28" " "
2EETG010 "LIMU" "FUNC" "DSWP_CI_GET_OBJECTS_BY_GUID" " "
2EETG010 "LIMU" "FUNC" "DSWP_CREATE_SOLUTION" " "
2EETG010 "LIMU" "FUNC" "E2E_STAPI_EXTRACTOR_CE2_V2" " "
2EETG010 "LIMU" "REPS" "LE2E_FUNC$33" " "
2EETG010 "LIMU" "FUNC" "E2E_TWB_POST_DATA_LOADER" " "
2EETG010 "LIMU" "FUNC" "FM_UPD_DELIVERY_AFTER_IMPORT" " "
2EETG010 "LIMU" "REPS" "LAI_UPDATE_CONTENT$01" " "
2EETG010 "LIMU" "FUNC" "SMSU_CREATE_TEMP_RFC" " "
2EETG010 "LIMU" "FUNC" "SMSU_MANAGED_SYSTEM" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$03" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$04" " "
2EETG010 "LIMU" "FUNC" "SMSY_GENERATE_RFCDEST_W_USER" " "
2EETG010 "LIMU" "REPS" "LSMSY_GENERATE_RFCDEST$07" " "
2EETG010 "LIMU" "FUNC" "SOLAR_BUSINESS_CONT_DISP_ALV" " "
2EETG010 "LIMU" "REPS" "LSOLAR05$33" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_ECTC" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_TWBC" " "
2EETG010 "R3TR" "INTF" "IF_ACE_METRIC_EVENT_FILTER" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "R3TR" "INTF" "IF_AI_SC_UTIL" " "
2EETG010 "R3TR" "INTF" "IF_ATW_METRIC" " "
2EETG010 "R3TR" "INTF" "IF_E2E_EFWK_SETUP" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_CC_INCIDENT_DETAILS" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_INCIDENT_FAVOURITES" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_RBE_IMPORT" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_WORK_DVM_SCH_ANALYSIS" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_TABLE_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_UI_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_SELF_MON_OVRVIEW" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_CONFIG_WIZARD" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_ALERTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DFLT_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_HIERARCHY" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_INCIDENT" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRICS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRIC_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_MONOBJ_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_NOTIFICATION" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_REACTIONS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_RULE_TYPE" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_ALRT_MEADEF_CTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_SISE_CUSTOM_TMPL_CONF" " "
2EETG010 "LIMU" "METH" "CL_ALERT_HTML_REPORT_GENERATORCM002" " "
2EETG010 "LIMU" "REPS" "AI_BPMON_FIX" " "
2EETG010 "LIMU" "REPS" "AI_CRM_IM_UPDATE_FROM_SAP_C01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_F01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_TOP" " "
2EETG010 "LIMU" "REPS" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "REPS" "CRM_DNO_SERVICE_MONITOR" " "
2EETG010 "LIMU" "REPS" "LDSWP_BPM_FUNCF08" " "
2EETG010 "LIMU" "REPS" "RLMDB_TECH_SCEN_DUAL_STACKS" " "
2EETG010 "LIMU" "REPS" "WDAL_URD2_BUSINESS_GRAPHICS" " "
2EETG010 "LIMU" "WAPP" "BSPWD_BASICS SCRIPTS.JS" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_DELTAHANDLIN" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_KEYBOARD.JS" " "
2EETG010 "LIMU" "WDYC" "AGS_CC_INCIDENT_DETAILS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_INCIDENT_FAVOURITES COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT IMP_FLOW_CONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_WORK_DVM_SCH_ANALYSIS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS V_SCOPE_SEL" " "
2EETG010 "LIMU" "WDYC" "POWL_TABLE_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "POWL_UI_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_ALRT_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_SELF_MON_OVRVIEW COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_CONFIG_WIZARD COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_CONFIG_WIZARD MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_ALERTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_ALERTS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER METRIC_GROUP_VARIANT" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DFLT_TEMPLATE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_HIERARCHY COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_INCIDENT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_INCIDENT MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRICS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRIC_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_MONOBJ_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_MONOBJ_DETAIL MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_NOTIFICATION COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_NOTIFICATION MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_REACTIONS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_REACTIONS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_RULE_TYPE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_RULE_TYPE MAIN" " "
2EETG010 "LIMU" "WDYC" "WD_ALRT_MEADEF_CTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WD_SISE_CUSTOM_TMPL_CONF COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_DVM_AFWK_LOG_VIEWER MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_INCIDENT_FAVOURITES VWWATCHLIST" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_AS VW_AS_TREE_TABLE" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_IMPORT V_LOG_COMP_MAP" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_CHANGE_REQS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_ISSUES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_MSGS_EODS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PARENT_OBJS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PROCESS_INFO" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_SERVICES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_TASKS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT WND_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_SERVICES_ENGAGE VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_OPERATION_CENTER V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_TWB_SETUP V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AI_SERVICE_CONNECTIONS TREE_CONTROL" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER2" " "
2EETG010 "LIMU" "WDYV" "WDC_ALERT_GROUP_DETAILS EVENT_GROUP_VIEW" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_CUSTOM_AGS V_BW_SYSTEM" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_SS_GUID_PROC GENERIC_POPUP" " "
Any help to fix this issue.
Rg,
KarthikHello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB -
Error in ABAP Import Phase - 3 jobs failed
Hi,
My installation of ECC IDES has failed in ABAP Import phase.
3 jobs has failed.
I figured out from the logs that there are 3 loads that has failed.
Failed loads are SAPPOOL, SAP0000 and SAPSLEXC.
The prominant error in them are as below. Please assist to relsove
these errors.
SAPPOOL.log
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT
NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN"
SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA )
IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293"
bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
SAP0000.log
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( CREATE TABLE "REPOLOAD" ( "PROGNAME" SAPDB6CHAR(40) DEFAULT ' ' NOT
NULL , "R3STATE" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "MACH"
SMALLINT DEFAULT 0 NOT NULL , "UNAM" SAPDB6CHAR(12) DEFAULT ' ' NOT
NULL , "UDAT" SAPDB6CHAR(8) DEFAULT '00000000' NOT NULL , "UTIME"
SAPDB6CHAR(6) DEFAULT '000000' NOT NULL , "L_DATALG" INTEGER DEFAULT 0
NOT NULL , "Q_DATALG" INTEGER DEFAULT 0 NOT NULL , "SDAT" SAPDB6CHAR(8)
DEFAULT '00000000' NOT NULL , "STIME" SAPDB6CHAR(6) DEFAULT '000000'
NOT NULL , "MINOR_VERS" SMALLINT DEFAULT 0 NOT NULL , "MAJOR_VERS"
INTEGER DEFAULT 0 NOT NULL , "LDATA" BLOB(1G)LOGGED , "QDATA" BLOB(1G)
LOGGED ) IN DGS#EL700D INDEX IN DGS#EL700I LONG IN DGS#EL700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
SAPSLEXC.log
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( CREATE TABLE "CO2MAP" ( "ID" INTEGER DEFAULT 0 NOT NULL , "SRCLINE"
INTEGER DEFAULT 0 NOT NULL , "PAGELINE" INTEGER DEFAULT 0 NOT
NULL , "IDINCL" INTEGER DEFAULT 0 NOT NULL , "SRCOFF" SMALLINT DEFAULT
0 NOT NULL , "PAGEOFF" SMALLINT DEFAULT 0 NOT NULL ) IN DGS#EL700D
INDEX IN DGS#EL700I LONG IN DGS#EL700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
Thanks and Regards,
Hussian Sehorewala
Edited by: Hussain Sehorewala on May 5, 2011 1:28 PMQ:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -ctf I Q:\1000082149\1\ABAP\DATA\SAPPOOL.STR C:\Program Files\sapinst_instdir\CRM70\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\DDLDB6.TPL SAPPOOL.TSK DB6 -l SAPPOOL.log
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job completed
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: AANK created #20110504190649
(DB) INFO: AANK~0 created #20110504190649
(IMP) INFO: import of AANK completed (0 rows) #20110504190649
(DB) INFO: AANL created #20110504190649
(DB) INFO: AANL~0 created #20110504190649
(IMP) INFO: import of AANL completed (0 rows) #20110504190649
(DB) INFO: ATAB created #20110504190649
(DB) INFO: ATAB~0 created #20110504190649
(DB6) Using LOAD API for table ATAB
(IMP) INFO: import of ATAB completed (2719993 rows) #20110504190723
(DB) INFO: BPHIER created #20110504190723
(DB) INFO: BPHIER~0 created #20110504190723
(IMP) INFO: import of BPHIER completed (0 rows) #20110504190723
(DB) INFO: CFIS created #20110504190723
(DB) INFO: CFIS~0 created #20110504190723
(IMP) INFO: import of CFIS completed (0 rows) #20110504190723
(DB) INFO: CRVP created #20110504190723
(DB) INFO: CRVP~0 created #20110504190723
(IMP) INFO: import of CRVP completed (0 rows) #20110504190723
(DB) INFO: DEBI created #20110504190723
(DB) INFO: DEBI~0 created #20110504190723
(IMP) INFO: import of DEBI completed (0 rows) #20110504190723
(DB) INFO: DVPOOL created #20110504190723
(DB) INFO: DVPOOL~0 created #20110504190723
(IMP) INFO: import of DVPOOL completed (0 rows) #20110504190723
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110504190723
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505112616
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505112617
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505113814
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505113815
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505114629
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505114629
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505120819
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505120819 -
ABAP Import Phase error during Install
Hi out there. I am installing an ERP system ECC 6.0 SR3 with just the AS ABAP and ECC components. It is now on the ABAP import phase and returns the error that certain ABAP objects are failing out of the 112 objects that is processing. Current examples are : -
=============================================================================
Loading of 'SAPSDIC_2' import package: ERROR
(DB) ERROR: DDL statement failed
(CREATE INDEX "VRSX2~1" ON "VRSX2" ( "RELID" , "OBJNAME" , "VERSNO" ) )
DbSlExecute: rc = 99
(SQL error -602)
error message returned by DbSl:
=============================================================================
Loading of 'DD03L' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
Loading of 'SAPAPPL2_9' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
I wish to know how else can 1 work around this ABAP import phase with errors such as these? Is there a manual procedure I can perform for this phase during installations so to avoid these errors that come up. And then re-run the install that goes past this?
Any help will be greatly appreciated.
Thanks in advance.Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday -
Why NetWeaver04 DB instance takes more time during 'Database Load' phase?
Hi,
I'm installing NetWeaver04 CI and DB instances on Solaris 10 machine and as a standalone installation. CI was installed fine and DB instance install takes forever and i don't know how long it will take because i started this at 17.20 and now it is 22.01. Here is the summary of my install.
1. Installed CI
Note: Unicode ABAP install
2. Ran DB instance install:
Note:Selected Advanced database options instead of RAW device
3. Completed Oracle install and continued for DB instance install
Note: Selected Unicode option and selected Enterprise install
4. The install so far completed 25 out of 39 tasks and it is waiting for more than 4 hrs at Database Load phase.
I'm not sure what will be the result of my install. I would like to know whether it is supposed to take that long for DB instance install. Could someone tell me what would be the reason and what would i've missed in the install steps.
Thanks,
RamThe load is by far the most time consuming operation; you can make this run faster if you have a large amount of hardware by increasing the number of parallel R3trans jobs (default is 3) during the installation. It's not uncommon for this step to run for several hours if you don't increase this parameter.
Also, you might watch the oracle alert log; if your archive directory fills up, the load will just hang indefinitly. If you create your oraarch filesystem with at least 4 GB of space, this shouldn't be an issue during the initial load, but if it's much smaller, you could run into a problem there....
Rich -
I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into OS X Lion.
I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
What can I do? Can someone help?
ThanksReinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
System Copy(homogenous) Error -Database load phase
Hello All,
I am doing System Copy thorugh Export - Import meothed of SAP R/3 4.7 110 on Windows2003-SQL 2000 SP3. Making Copy of Production server with different SID.After taking Export Successfully from Production Server I am Importing it to Target System
but i am facing error at Database Load Phase getting the same error on almost every process like SAPSSEXE,SAPCLUST,SAPAPPL0,SAPAPPL1 etc. the error is below :
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808202046
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\PRT\SYS\exe\run/R3load.exe -ctf I C:\EXPORT/DATA/SAPAPPL1.STR C:\EXPORT/DB/DDLMSS.TPL C:\SAPinst MSSQL SAPINST3/SAPAPPL1.TSK MSS -l C:\SAPinst MSSQL SAPINST3/SAPAPPL1.log
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: END OF LOG: 20090808202047
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808202053
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\PRT\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL SAPINST3/SAPAPPL1.cmd -l C:\SAPinst MSSQL SAPINST3/SAPAPPL1.log -loadprocedure fast
DbSl Trace: SQLOLEDB Provider Release:08.10.3959
DbSl Trace: Shared cache sizes: header 52 bytes, 10000 names (13360000 bytes), 1000 dynamic statements (5436000 bytes), total 18796052 bytes
DbSl Trace: Initializing private procedure name cache.
DbSl Trace: procedure cache created/attached
DbSl Trace: Thank You for using the SLOLEDB-interface
DbSl Trace: Connected to db server : [prdt], dbname: PRT, dbuser: prt
DbSl Trace: Using dynamic link library 'E:\usr\sap\PRT\SYS\exe\run\dbmssslib.dll'
DbSl Trace: dbmssslib.dll patch info
DbSl Trace: patchlevel 0
DbSl Trace: patchno 524
DbSl Trace: patchcomment DBDYNPSOURCE/DBDYNPSOURCE~, SHADOW_IMPORT_ALL (578789)
DbSl Trace: The IRow interface is supported by this OLEDB provider
DbSl Trace: ParamStmtExec: line 23573. hr: 0x80040e37 Invalid object name 'SVERS'.
DbSl Trace: HandleOledbError [ParamStmtExec,line 23573]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
DbSl Trace: ParamStmtExec failed. HR 80040e37 DBSL retcode 103. stmt: [SELECT VERSION AS c FROM SVERS ]
DbSl Trace: Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:12157
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on open
DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000001202054>
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on fetch
DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000001202054>
Sat Aug 08 20:20:54 2009
**LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(GSI) INFO: dbname = "PRTprdt "
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "PRDT "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PRDT"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 15 Step 2)"
DbSl Trace: ParamStmtExec: line 23573. hr: 0x80040e37 Invalid object name 'SVERS'.
DbSl Trace: HandleOledbError [ParamStmtExec,line 23573]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
DbSl Trace: ParamStmtExec failed. HR 80040e37 DBSL retcode 103. stmt: [SELECT VERSION AS c FROM SVERS ]
DbSl Trace: Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:12157
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on open
DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000002202054>
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on fetch
DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000002202054>
Interface access functions from dynamic library dbmssslib.dll loaded.(IMP) INFO: import of /1DF/__GI000 completed (0 rows)
(IMP) INFO: import of /BDL/BADHOST completed (0 rows)
(IMP) INFO: import of /BDL/CUSTSES completed (0 rows)
(IMP) INFO: import of /BDL/INTSESS completed (0 rows)
(IMP) INFO: import of /BDL/MSGLOG completed (0 rows)
(IMP) INFO: import of /BDL/NOHOSTS completed (0 rows)
(IMP) INFO: import of /BDL/SESDEST completed (0 rows)
(IMP) INFO: import of /BDL/SESS completed (0 rows)
(IMP) INFO: import of /BDL/STATUS completed (0 rows)
(IMP) INFO: import of /BDL/TESTSES completed (0 rows)
(IMP) INFO: import of /BDL/TRHOSTS completed (0 rows)
(IMP) INFO: import of /SAPDMC/LSOFIL completed (56 rows)
(IMP) INFO: import of /SAPDMC/LSOFIW completed (0 rows)
(IMP) INFO: import of /SAPDMC/LSOPRT completed (0 rows)
(IMP) INFO: import of /SAPSLL/BWHSTR3 completed (0 rows)
(IMP) INFO: import of /SAPSLL/CUWLAR3 completed (0 rows)
(IMP) INFO: import of /SAPSLL/KMATWLR3 completed (0 rows)
(IMP) INFO: import of /SAPSLL/OBJIDX completed (0 rows)
(IMP) INFO: import of /SAPSLL/OBJSSF completed (0 rows)
(IMP) INFO: import of /SAPSLL/OBJSYNC completed (0 rows)
(IMP) INFO: import of /SAPSMOSS/UPDATE completed (0 rows)
(IMP) INFO: import of /SAPTRX/AOTREF completed (0 rows)
(IMP) INFO: import of /SAPTRX/APPTALOG completed (0 rows)
(IMP) INFO: import of /SAPTRX/ASITEMID completed (0 rows)
(IMP) INFO: import of /SAPTRX/MTOBJLOG completed (0 rows)
(IMP) INFO: import of /SCMB/DF_DEL_TAB completed (0 rows)
(IMP) INFO: import of /SCMB/DF_DNET completed (0 rows)
(IMP) INFO: import of /SCMB/DF_DOC completed (0 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SCMB/DF_DOC_VAL
completed (0 rows)
(IMP) INFO: import of /SCMB/DF_DQTY completed (0 rows)
(IMP) INFO: import of /SCMB/DF_DVALUE completed (0 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SCMB/TREEVIEW2 completed
(0 rows)
(IMP) INFO: import of /SDF/INDX completed (0 rows)
(IMP) INFO: import of /SDF/SDBAH completed (0 rows)
(IMP) INFO: import of /SOMO/JOSCHEDL completed (0 rows)
(IMP) INFO: import of /SOMO/JOSCHEDLT completed (0 rows)
(IMP) INFO: import of /SSF/DHEAD completed (1 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SSF/DTAB completed (18
rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SSF/PTAB completed (7520 rows)
(IMP) INFO: import of A055 completed (0 rows)
(IMP) INFO: import of A056 completed (0 rows)
(IMP) INFO: import of A064 completed (0 rows)
(IMP) INFO: import of A065 completed (0 rows)
(IMP) INFO: import of ABDBG_BPS completed (0 rows)
(IMP) INFO: import of ABDBG_INFO completed (0 rows)
(IMP) INFO: import of ACCRPOST completed (0 rows)
(IMP) INFO: import of ACCTCR completed (7346418 rows)
(IMP) INFO: import of ACCTHD completed (624272 rows)
(IMP) INFO: import of ACCTIT completed (3673209 rows)
(IMP) INFO: import of ACEPSOH completed (0 rows)
(IMP) INFO: import of ACEPSOI completed (0 rows)
(IMP) INFO: import of ACEPSOIT completed (0 rows)
(IMP) INFO: import of ACL_ACE completed (0 rows)
(IMP) INFO: import of ACL_ACTGR completed (0 rows)
(IMP) INFO: import of ACL_ACTGRE completed (0 rows)
(IMP) INFO: import of ACL_ACTGRT completed (0 rows)
(IMP) INFO: import of ACL_ACTVT completed (0 rows)
(IMP) INFO: import of ACL_ACTVTT completed (0 rows)
(IMP) INFO: import of ACL_CACHE completed (0 rows)
(IMP) INFO: import of ACL_MAIN completed (0 rows)
(IMP) INFO: import of ACL_OBJTP completed (0 rows)
(IMP) INFO: import of ACL_OBJTPA completed (0 rows)
(IMP) INFO: import of ACL_OBJTPG completed (0 rows)
(IMP) INFO: import of ACL_OBJTPT completed (0 rows)
(IMP) INFO: import of ACL_OWNER completed (0 rows)
(IMP) INFO: import of ACRELATION completed (76954 rows)
(IMP) INFO: import of ACTFLI completed (0 rows)
(IMP) INFO: import of AD01DLI completed (0 rows)
(IMP) INFO: import of AD01DLIEF completed (0 rows)
(IMP) INFO: import of AD01DLISF completed (0 rows)
(IMP) INFO: import of AD01FILTVAR completed (0 rows)
(IMP) INFO: import of AD01STRUCTVAR completed (0 rows)
(IMP) INFO: import of AD01VARMASTER completed (0 rows)
(IMP) INFO: import of ADATABSIZE completed (0 rows)
(IMP) INFO: import of ADJT_TRANSACTION completed (0 rows)
(IMP) INFO: import of ADMI_BUFFC completed (0 rows)
(IMP) INFO: import of ADMI_BUFFI completed (0 rows)
(IMP) INFO: import of ADMI_FILES completed (0 rows)
(IMP) INFO: import of ADMI_JOBS completed (0 rows)
(IMP) INFO: import of ADMI_RJOBS completed (0 rows)
(IMP) INFO: import of ADMI_RUN completed (0 rows)
(IMP) INFO: import of ADMI_SKIP completed (0 rows)
(IMP) INFO: import of ADMI_STATS completed (0 rows)
(IMP) INFO: import of ADMI_VARIA completed (0 rows)
(IMP) INFO: import of ADMI_XDOCS completed (0 rows)
(IMP) INFO: import of ADMI_XRUN completed (0 rows)
(IMP) INFO: import of AFAB completed (0 rows)
(IMP) INFO: import of AFBP completed (0 rows)
(IMP) INFO: import of AFFH completed (0 rows)
(IMP) INFO: import of AFFL completed (366118 rows)
(IMP) INFO: import of AFFT completed (0 rows)
(IMP) INFO: import of AFFV completed (0 rows)
(IMP) INFO: import of AFFW completed (7 rows)
(IMP) INFO: import of AFFWPRO completed (0 rows)
(IMP) INFO: import of AFIH completed (113 rows)
The above error are also present in the other Process log files.
But when i saw the installation logs of the Source system the same errors are also there(but it was still Sucessfull Standard installation).
there is one difference as well I am SQL SP3 (8.00.780) but existing Production server is SQL SP3(8.00.929).
My installation is stoppoing here with error While executing Script.
I've done Homogenous copy on WiN-ORACLE many times but on WIN-SQL i am doing very first time.
While installation database phase it asked me for EXPORT CD twice first time for standard(which usually we got with SAP Software) and Second time for Migration EXPORT. that is different from ECC5.0 i think.
Any suggestions?
Regards,
Vinay
Edited by: Vinay Paul on Aug 8, 2009 11:01 PMDear Markus,
Thanks for the Reply.
As you Said i am upgrading my kernal (making it same as current kernel using bysource system that is 175).
Hope this will solve my problem ....Do i have to restart my complete installation now?
My recent last error was :
SAPSSRC.LOG
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808202048
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\PRT\SYS\exe\run/R3load.exe -ctf I C:\EXPORT/DATA/SAPSSRC.STR C:\EXPORT/DB/DDLMSS.TPL C:\SAPinst MSSQL SAPINST3/SAPSSRC.TSK MSS -l C:\SAPinst MSSQL SAPINST3/SAPSSRC.log
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: END OF LOG: 20090808202048
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808221527
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\PRT\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL SAPINST3/SAPSSRC.cmd -l C:\SAPinst MSSQL SAPINST3/SAPSSRC.log -loadprocedure fast
DbSl Trace: SQLOLEDB Provider Release:08.10.3959
DbSl Trace: Shared cache sizes: header 52 bytes, 10000 names (13360000 bytes), 1000 dynamic statements (5436000 bytes), total 18796052 bytes
DbSl Trace: Initializing private procedure name cache.
DbSl Trace: procedure cache created/attached
DbSl Trace: Thank You for using the SLOLEDB-interface
DbSl Trace: Connected to db server : [prdt], dbname: PRT, dbuser: prt
DbSl Trace: Using dynamic link library 'E:\usr\sap\PRT\SYS\exe\run\dbmssslib.dll'
DbSl Trace: dbmssslib.dll patch info
DbSl Trace: patchlevel 0
DbSl Trace: patchno 524
DbSl Trace: patchcomment DBDYNPSOURCE/DBDYNPSOURCE~, SHADOW_IMPORT_ALL (578789)
DbSl Trace: The IRow interface is supported by this OLEDB provider
(DB) INFO: connected to DB
(GSI) INFO: dbname = "PRTprdt "
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "PRDT "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PRDT"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 15 Step 2)"
Interface access functions from dynamic library dbmssslib.dll loaded.(IMP) INFO: import of ABTREE completed (39 rows)
(IMP) INFO: import of AKB_CHKCONF completed (0 rows)
(IMP) INFO: import of AKB_INDX completed (0 rows)
(IMP) INFO: import of APTREE completed (1531 rows)
(IMP) INFO: import of APTREET completed (75 rows)
(IMP) INFO: import of CAPTREE completed (0 rows)
(IMP) INFO: import of CAPTREET completed (0 rows)
(IMP) INFO: import of CCCEXIT completed (44 rows)
(IMP) INFO: import of CCCINFO completed (15 rows)
(IMP) INFO: import of CLMCUS completed (0 rows)
(IMP) INFO: import of CONTCOMP completed (2 rows)
(IMP) INFO: import of CONTCOMPT completed (4 rows)
(IMP) INFO: import of CONTCOMPX completed (2 rows)
(IMP) INFO: import of CONTCOMPXT completed (3 rows)
(IMP) INFO: import of CROSS completed (1399548 rows)
(IMP) INFO: import of CUSTDIR completed (0 rows)
(IMP) INFO: import of CWBMODILOG completed (0 rows)
(IMP) INFO: import of DBDATA completed (0 rows)
(IMP) INFO: import of DIRTREE completed (21 rows)
(IMP) INFO: import of DVSEQDIR completed (0 rows)
(IMP) INFO: import of DWTREE completed (522 rows)
(IMP) INFO: import of EUDIAL completed (0 rows)
(IMP) INFO: import of EUF4VALUES completed (34 rows)
(IMP) INFO: import of EUFUNC completed (76 rows)
(IMP) INFO: import of EUIMPORT completed (47 rows)
(IMP) INFO: import of EUINFO completed (2772 rows)
(IMP) INFO: import of EUINFOLI completed (0 rows)
(IMP) INFO: import of FUSEQDIR completed (0 rows)
(IMP) INFO: import of GUIDIR completed (0 rows)
(IMP) INFO: import of GUIDIRT completed (3 rows)
(IMP) INFO: import of GUINODE completed (0 rows)
(IMP) INFO: import of GUINODT completed (0 rows)
(IMP) INFO: import of ICON completed (982 rows)
(IMP) INFO: import of ICONP completed (149 rows)
(IMP) INFO: import of ICONT completed (3361 rows)
(IMP) INFO: import of ICO_P completed (0 rows)
(IMP) INFO: import of LDBS completed (0 rows)
(IMP) INFO: import of MAPPARAREF completed (0 rows)
(IMP) INFO: import of MODACT completed (0 rows)
(IMP) INFO: import of MODATTR completed (0 rows)
(IMP) INFO: import of MODIDIR completed (0 rows)
(IMP) INFO: import of MODSAPA completed (2049 rows)
(IMP) INFO: import of MODSAPT completed (3991 rows)
(IMP) INFO: import of MODTEXT completed (0 rows)
(IMP) INFO: import of O2APPL completed (164 rows)
(IMP) INFO: import of O2APPLT completed (305 rows)
(IMP) INFO: import of O2PAGCON completed (4120 rows)
(IMP) INFO: import of O2THEMEREL completed (0 rows)
(IMP) INFO: import of O2THEMES completed (1 rows)
(IMP) INFO: import of O2THEMEST completed (0 rows)
(IMP) INFO: import of O2XMLDESC completed (89 rows)
(IMP) INFO: import of O2XSLTDESC completed (163 rows)
(IMP) INFO: import of O2XSLTOTR completed (0 rows)
(IMP) INFO: import of O2XSLTTEXT completed (385 rows)
(IMP) INFO: import of OBJ_DIFF completed (0 rows)
(IMP) INFO: import of OXT_PICTURE completed (146 rows)
(IMP) INFO: import of PACKCHECK_EXCEPT completed (131 rows)
(IMP) INFO: import of PRICAT_FIELD completed (172 rows)
(IMP) INFO: import of PRICAT_FIELDT completed (343 rows)
(IMP) INFO: import of PROP_ELTYP completed (27 rows)
(IMP) INFO: import of RLB_DB_LB completed (2 rows)
(IMP) INFO: import of RLB_DB_LBT completed (4 rows)
(IMP) INFO: import of RLB_DB_PR completed (31 rows)
(IMP) INFO: import of RLB_DB_PRT completed (62 rows)
(IMP) INFO: import of RLIB_CONT completed (0 rows)
(IMP) INFO: import of RLIB_OBJS completed (1160 rows)
(IMP) INFO: import of RLIB_TREES completed (5 rows)
(IMP) INFO: import of RSEUINC completed (588382 rows)
(IMP) INFO: import of RSEUMOD completed (49 rows)
(IMP) INFO: import of RSEUTAB completed (0 rows)
(IMP) INFO: import of RSMPCHECK completed (31 rows)
(IMP) INFO: import of RSMPCHECKT completed (62 rows)
(IMP) INFO: import of RSMPTEXTSI completed (0 rows)
(IMP) INFO: import of RSNORMTXT completed (246 rows)
(IMP) INFO: import of SDBUSRSET completed (0 rows)
(IMP) INFO: import of SMODILOG completed (125 rows)
(IMP) INFO: import of SMODILOGI completed (0 rows)
(IMP) INFO: import of SMODIPROJ completed (0 rows)
(IMP) INFO: import of SMODISRC completed (492 rows)
(IMP) INFO: import of SMODISRCI completed (0 rows)
(IMP) INFO: import of SMODITRAN completed (0 rows)
(IMP) INFO: import of SMODIUSER completed (0 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 22, table "SPROXDAT"
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be usedDbSl Trace: invalid sign in BCD number: 1
DbSl Trace: Error converting decimal: 000000000200303.0 HEX: 0000000002003031 input variable# 12, proc: ## No proc
DbSl Trace: invalid sign in BCD number: 1
DbSl Trace: Error converting decimal: 000000000200303.0 HEX: 0000000002003031 input variable# 14, proc: ## No proc
DbSl Trace: internal error in decimal conversion.
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 8, table "SPROXHDR"
(IMP) INFO: import of SPROXINDX completed (0 rows)
(IMP) INFO: import of SPROXKEY completed (0 rows)
(IMP) INFO: import of SPROXREG completed (9 rows)
(IMP) INFO: import of SPROXSET completed (0 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of SPROXTST completed (0 rows)
(IMP) INFO: import of SRESETLOG completed (0 rows)
(IMP) INFO: import of SRESETLOG2 completed (0 rows)
(IMP) INFO: import of SXC_ATTR completed (1045 rows)
(IMP) INFO: import of SXC_ATTRT completed (1855 rows)
(IMP) INFO: import of SXC_CLASS completed (1045 rows)
(IMP) INFO: import of SXC_COCO completed (0 rows)
(IMP) INFO: import of SXC_EXIT completed (1449 rows)
(IMP) INFO: import of SXC_FCODE completed (11 rows)
(IMP) INFO: import of SXC_FCODET completed (23 rows)
(IMP) INFO: import of SXC_IMPSWH completed (2551 rows)
(IMP) INFO: import of SXC_SCRN completed (47 rows)
(IMP) INFO: import of SXC_TABLE completed (0 rows)
(IMP) INFO: import of SXC_TABLET completed (0 rows)
(IMP) INFO: import of SXS_ATTR completed (2093 rows)
(IMP) INFO: import of SXS_ATTRT completed (4020 rows)
(IMP) INFO: import of SXS_COCO completed (0 rows)
(IMP) INFO: import of SXS_FCODE completed (64 rows)
(IMP) INFO: import of SXS_FCODET completed (128 rows)
(IMP) INFO: import of SXS_INTER completed (2093 rows)
(IMP) INFO: import of SXS_MLCO completed (616 rows)
(IMP) INFO: import of SXS_SCRN completed (80 rows)
(IMP) INFO: import of SXS_SCRNT completed (141 rows)
(IMP) INFO: import of SXS_TABLE completed (1 rows)
(IMP) INFO: import of SXS_TABLET completed (2 rows)
(IMP) INFO: import of SYS_COMP completed (0 rows)
(IMP) INFO: import of TBPROGREF completed (251 rows)
(IMP) INFO: import of TBVIEWER completed (0 rows)
(IMP) INFO: import of TCG01 completed (9 rows)
(IMP) INFO: import of TCP11 completed (1 rows)
(IMP) INFO: import of TCP13 completed (0 rows)
(IMP) INFO: import of TCP17 completed (0 rows)
(IMP) INFO: import of TGLIF completed (534 rows)
(IMP) INFO: import of THELPI completed (0 rows)
(IMP) INFO: import of TMCRT completed (303 rows)
(IMP) INFO: import of TMEMO completed (0 rows)
(IMP) INFO: import of TRANSFDESC completed (0 rows)
(IMP) INFO: import of TRANSFTEXT completed (0 rows)
(IMP) INFO: import of TRDIRE completed (32350 rows)
(IMP) INFO: import of TREELOG completed (15990 rows)
(IMP) INFO: import of W3HTMLT completed (1138 rows)
(IMP) INFO: import of W3HTRCT completed (162 rows)
(IMP) INFO: import of W3JSCRT completed (0 rows)
(IMP) INFO: import of W3MIMET completed (361 rows)
(IMP) INFO: import of W3OBJLOINF completed (0 rows)
(IMP) INFO: import of W3PUBDIR completed (0 rows)
(IMP) INFO: import of W3SERINTP completed (44 rows)
(IMP) INFO: import of W3SERINTPT completed (63 rows)
(IMP) INFO: import of W3SERVICET completed (156 rows)
(IMP) INFO: import of WBCROSSGT completed (126383 rows)
(IMP) INFO: import of WBCROSSI completed (5654 rows)
(DB) INFO: disconnected from DB
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: job finished with 2 error(s)
E:\usr\sap\PRT\SYS\exe\run/R3load.exe: END OF LOG: 20090808221726
Regards,
Vinay -
ABAP Import Phase DDL Statement Error
Hi Experts!
I am installing SAP Netweaver PI 7.3 EHP1 and encountered an error in the ABAP import phase.
I checked the import monitor logs and found a clue about SAPVIEW.log.
I have checked the SAPVIEW.log and found out the following:
ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG:
Please help!
Also please let me know if any further detail is required.
Regards,
AyanGaurav,
Please find the below pasted trace from SAPVIEW.log
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -ctf I /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DATA/SAPVIEW.STR /tmp/sapinst_instdir/NW731/DB6/INSTALL/STD/AS/DDLDB6.TPL SAPVIEW.TSK DB6 -l SAPVIEW.log
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job completed
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) INFO: /BI0/MHIER_VERS created #20140823014054
(DB) INFO: /BI0/RALEAFNODCH created #20140823014054
(DB) INFO: /BI0/RALEAFNODSP created #20140823014054
(DB) INFO: /BI0/RBUCKET created #20140823014054
(DB) INFO: /BI0/RCALMONTH created #20140823014054
(DB) INFO: /BI0/RCALMONTH2 created #20140823014054
(DB) INFO: /BI0/RCALQUART1 created #20140823014054
(DB) INFO: /BI0/RCALQUARTER created #20140823014054
(DB) INFO: /BI0/RCALWEEK created #20140823014054
(DB) INFO: /BI0/RCALYEAR created #20140823014054
(DB) INFO: /BI0/RCHNGID created #20140823014054
(DB) INFO: /BI0/RCURRENCY created #20140823014054
(DB) INFO: /BI0/RDATE created #20140823014054
(DB) INFO: /BI0/RFISCPER created #20140823014054
(DB) INFO: /BI0/RFISCPER3 created #20140823014054
(DB) INFO: /BI0/RFISCVARNT created #20140823014054
(DB) INFO: /BI0/RFISCYEAR created #20140823014054
(DB) INFO: /BI0/RHALFYEAR1 created #20140823014054
(DB) INFO: /BI0/RHIENM created #20140823014054
(DB) INFO: /BI0/RHIER_HIEID created #20140823014054
(DB) INFO: /BI0/RHIER_NODE created #20140823014054
(DB) INFO: /BI0/RHIER_VERS created #20140823014054
(DB) INFO: /BI0/RINFOPROV created #20140823014054
(DB) INFO: /BI0/RIOBJNM created #20140823014054
(DB) INFO: /BI0/RLANGU created #20140823014054
(DB) INFO: /BI0/RLOGSYS created #20140823014054
(DB) INFO: /BI0/RNODEPOSIT created #20140823014054
(DB) INFO: /BI0/RNORESTNODE created #20140823014054
(DB) INFO: /BI0/RRATE_TYPE created #20140823014054
(DB) INFO: /BI0/RRECORDMODE created #20140823014054
(DB) INFO: /BI0/RRECORDTP created #20140823014054
(DB) INFO: /BI0/RREQUID created #20140823014054
(DB) INFO: /BI0/RSIGNCH created #20140823014054
(DB) INFO: /BI0/RSOURSYSTEM created #20140823014054
(DB) INFO: /BI0/RTIME created #20140823014054
(DB) INFO: /BI0/RTXTLG created #20140823014054
(DB) INFO: /BI0/RTXTMD created #20140823014054
(DB) INFO: /BI0/RTXTSH created #20140823014054
(DB) INFO: /BI0/RUNIT created #20140823014054
(DB) INFO: /BI0/RWEEKDAY1 created #20140823014054
(DB) INFO: /BI0/ZBUCKET created #20140823014054
(DB) INFO: /BI0/ZCALMONTH created #20140823014054
(DB) INFO: /BI0/ZCALMONTH2 created #20140823014054
(DB) INFO: /BI0/ZDATE created #20140823014054
(DB) INFO: /BI0/ZFISCPER created #20140823014055
(DB) INFO: /BI0/ZHALFYEAR1 created #20140823014055
(DB) INFO: /BI0/ZINFOPROV created #20140823014055
(DB) INFO: /BI0/ZIOBJNM created #20140823014055
(DB) INFO: /GC1/VXXX created #20140823014055
(DB) INFO: /OSP/V_RAUI_CHRD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CMVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CPVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CSED created #20140823014055
(DB) INFO: /OSP/V_RAUI_DCDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_GRPD created #20140823014055
(DB) INFO: /OSP/V_RAUI_MTD created #20140823014055
(DB) INFO: /OSP/V_RAUI_MVDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_PBDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_RDDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_RFCD created #20140823014055
(DB) INFO: /OSP/V_RAUI_RMTD created #20140823014055
(DB) INFO: /OSP/V_RAUI_RTDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_SCD created #20140823014055
(DB) INFO: /OSP/V_RAUI_SCHD created #20140823014055
(DB) INFO: /OSP/V_RAUI_SELD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TMVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPBD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPRD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TRGD created #20140823014055
(DB) INFO: /OSP/V_RAUI_VARD created #20140823014055
(DB) INFO: /SAPAPO/GEWICHT created #20140823014055
(DB) INFO: /SAPAPO/TRENDAM created #20140823014055
(DB) INFO: /SAPAPO/VWALPROF created #20140823014055
(DB) INFO: /SAPPO/FULL_HINT created #20140823014055
(DB) INFO: /SAPPO/V_PPOCMPL created #20140823014055
(DB) INFO: /SAPPO/V_PPO_UPD created #20140823014055
(DB) INFO: /SAPTRX/A_CONDF4 created #20140823014055
(DB) INFO: /SAPTRX/EE_FLDS created #20140823014055
(DB) INFO: /SAPTRX/MSG_PARA created #20140823014055
(DB) INFO: /SAPTRX/MSG_PTAB created #20140823014055
(DB) INFO: /SAPTRX/STR_FLDS created #20140823014055
(DB) INFO: /SAPTRX/VDASFEV created #20140823014055
(DB) INFO: /SAPTRX/VDASFPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_AOMIL created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAC created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAE created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAI created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTD1 created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTD2 created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTDD created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTYP created #20140823014055
(DB) INFO: /SAPTRX/VD_ASPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_CONDL created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD1 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD2 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD3 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD4 created #20140823014055
(DB) INFO: /SAPTRX/V_AODD02 created #20140823014055
(DB) INFO: /SAPTRX/V_DD03 created #20140823014055
(DB) INFO: /SAPTRX/V_DD03X created #20140823014055
(DB) INFO: /SDF/CMO_OBJ_TR created #20140823014055
(DB) INFO: /SDF/CMO_SMDCMP created #20140823014056
(DB) INFO: /SDF/CMO_SMDDVC created #20140823014056
(DB) INFO: /SDF/CMO_UMDCMP created #20140823014056
(DB) INFO: /SDF/SMODICOMP created #20140823014056
(DB) INFO: /SDF/SMODIDEVC created #20140823014056
(DB) INFO: /SDF/UMOD_COMP created #20140823014056
(DB) INFO: AKB_TRHD_DETAIL created #20140823014056
(DB) INFO: ALTEXTHIST created #20140823014056
(DB) INFO: APPL_DEVC created #20140823014056
(DB) INFO: APPL_DIAL created #20140823014056
(DB) INFO: APPL_DOMA created #20140823014056
(DB) INFO: APPL_DTEL created #20140823014056
(DB) INFO: APPL_ENQU created #20140823014056
(DB) INFO: APPL_FUGR created #20140823014056
(DB) INFO: APPL_FUGRG created #20140823014056
(DB) INFO: APPL_FUNC created #20140823014056
(DB) INFO: APPL_INDX created #20140823014056
(DB) INFO: APPL_MCOB created #20140823014056
(DB) INFO: APPL_MENU created #20140823014056
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014056
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014312
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014318
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823015246
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823015250
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140825011924
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140825011937
Please look into this..
Regards,
Ayan -
Stuck on the loading page for 5 hours
My Macbook Pro is stuck on the loading page since 4 this afternoon and nothings has change since tthen, I try to close it, reopen it and nothing happen, I even try to plug it and nothings happens, I don't know what to do. If someone can help me that would be really nice.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My MacBook Pro is stuck on the loading screen and sounds as if its about the take off?!
Hi everyone. About 3 hours ago my laptop suddenly became very unresponsive and began freezing a lot. I cleared the cookies on Firefox, but the problem carried on so I tried rebooting. Now it has been stuck on the loading screen for about half an hour, sounding like a rocket ready to take off.. I brought it second hand and I don't have an installation CD, at least if I do it's not here at uni with me anyway.. Any ideas?! Thanks
Not knowing what your os is very difficult regarding offering troubleshooting solutions. Most if not all the system discs are machine specific.
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
Mac OS X versions (builds) for computers
Maybe you are looking for
-
Error ORA-02375 while trying to export/import JTF.JTF_PF_REPOSITORY table
We have already created an SR, In the mean time, trying to see whether anyone else has come across this issue. Thanks. On : 11.2.0.3 version, Data Pump Import Error ORA-02375 while trying to import JTF.JTF_PF_REPOSITORY table We are getting the belo
-
After I sync by attaching my phone to the computer ... the aps do not open on my phone. I tried to power my phone off and then back on but they still do not open. What do I need to do to get them to work?
-
Why can I not download the latest version of firefox onto my Max?
-
I have one iPad that will connect to our wifi but I have another one that will not, why is that
I have an iPad that will not connect to the wifi at our house. My sister also has an iPad and it connects automatically. Mine is the only one that will not. I can't figure how to get it to work. I have taken my iPad other places with wifi and it conn
-
E-Recruiting- Qualification catalogue
Hi If I maintain a Qualification catalogue in e-Rec system the number range of the catalogue will be different from the Payroll/hr system. When I transfer (hire) the external candidate data (along with qualifications) to the Payroll system will the p