Installation stuck in loop

I recently upgraded my hard drive and installed OS X lion. It gave me a kernel error which got stuck in restarting non stop and now I have been trying to install mavericks which is stuck in a loop. It installs but refuses to restart automatically and when I restart it it just goes back to the utilities screen. I tried verifying the disk which gives off unused nodes errors and run repair which fixes it and then veryfing gives off another unused node. Not sure if something is failing, missing, broken or what I can do to make it work correctly.

Also when I try installing lion from my disc it goes to the installation bar then to a black screen and gives me an error that says the Mac OS X installation could not be completed.

Similar Messages

Windows 8.1 installation stucked at 'Finalizing your settings' stage!

I have G580 model. yesterday I was trying to install windows 8.1 but the installation stucked at "Finalizing your system" stage for about 18 hours! I tried several times to go to the BIOS for reinstall 8.1 or fresh installation of windows 7. but I cant enter into the BIOS by pressing F2/F8/F10/DEL whatever after restarting my system immidiately! what should I do! please help me to install my previous windows 7 OS.
Solved!
Go to Solution.

If you performed a clean install, try again and see if it works out. The same thing which you faced happened to me while I was upgrading from windows 8 to 8.1, it took me a couple of tries before 8.1 would finally install.
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Why is the installer stuck on "Checking System Profile-"?

I'm trying to install Flash Catalyst Beta on a MacBook Pro running OS 10.6.1 (Snow Leopard).
The installer starts to work, but then it stops at the point where it checks the system profile (see attached screenshot). It doesn't seem to have crashed as the dock icon allows me to quit without force quitting the application.
I've tried it in my regular user account and the administrator account, but the behaviour is identical.
Any help would be appreciated.

I appreciate all your efforts, but I¹ve just received my new copy of CS5, so
I¹ll be installing the final version.
G
From: ritesh kapoor <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 29 Apr 2010 04:32:06 -0600
To: Gary Horsman <[email protected]>
Subject: Why is the installer stuck on "Checking System
Profile…"?
Thanks Gary.
I need to ask you a few questions and request you to perform some more steps
so that I can debug your problem.
1. Have you modified any folder permissions, authorization setup using
Keychain Access utility (or any other tool)?
2. Open a Terminal window, and run the command 'ls -l /tmp' and copy-paste
the output printed on your screen in your reply.
3. Delete all files whose name start with 'asu' in your /tmp folder. Run the
command 'rm -rf /tmp/asu*'. Restart your machine.
4. Launch the Flash Catalyst setup and check if installation proceeds
successfully. If it doesn't, proceed to the step below.
5. Open the folder containing the Flash Catalyst setup. Browse to the
'packages' folder and rename the file 'install.sig' to 'update.sig'. Double
click and launch the Flash Catalyst setup. This will not install the
application but install the Adobe Application Manager. Let me know if you
see a small dialog with a progress bar. Rename back update.sig to
install.sig. Update us your observations. Continue to next step.
6. Launch 'Disk Utility' app (from /Applications/Utilities). Select your OS
partition in the left panel and click on 'First Aid' tab on the top. Click
on the 'Repair Disk Permissions' button at the bottom.
7. Again, launch the Flash Catalyst setup and check if installation proceeds
successfully. If it doesn't, proceed to the step below.
8. Open a Terminal window and navigate to the directory containing the Flash
Catalyst setup. Run the command 'sudo Install.app/Contents/MacOS/Install'
and enter the password. Let me know if the installer launches and on
following the screen instructions do you still see the error screen or does
the installation proceed successfully.

HT201089 Sign in to Approve stuck in loop- any fixes? This worked fine this morning

Sign in to Approve stuck in loop- any fixes? This worked fine this morning, but now when asked to approve I am repeatedly prompted for my iCloud password. Other iCloud services are working fine.

Hi
Have you tried allowing cookies and west data in safari

OBIEE 11g installation stuck at step 12 of 14 (0% copying files...)

Hi All,
I am installing OBIEE 11g on Windows7 32Bit OS.
I have done with all the steps till step 11 without any error. However, ASA it starts the step 12 (i.e. Configuring WebLogic- Copying files...), installation stuck at 0% and do not continue. I waited for 8-10 Hrs but it never started copying files.
Also, I tried the installation numerous times, but every time I got the same problem.
I verified the logs as well, but there was no error.
Please help me to resolve the issue.
Regards,
Ashish

Yes, I got an idea, install OBIEE in a supported platform as your it's not supported at the moment:
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

Solman installation stuck with error - SLES 10 , Oracle 10.2.0.4

Hi,
Solman 7.0 installation with ehp1 installation stuck with error - SLES 10 , Oracle 10.2.0.4
the error is at the step install DBA tools -> error is 'select status from v$instance did not match /^\s(\S+)\s$S/gNaNOPEN MIGRATE'.)
Just FYI : we had issue while installing Oracle , we have followed work arround 3 in the SAP Note 980426
Kindly help to proceed further
Thanks & regards,
Prabhakar Reddy.Y.C.

sapinst.log
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2010-11-21 06:55:22.502
MUT-03025 Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ERROR 2010-11-21 06:55:22.533
FCO-00011 The step runSapdbaroleSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbaTools|ind|ind|ind|ind|11|0|
runSapdbaroleSql was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Edited by: prabhakaryc on Nov 21, 2010 7:01 AM

Bootcamp Drivers Installer stuck at installing iSight

I don't know why the installer stucked at installing iSight. Also, I tried to manually install Apple drivers but it also stucked at 'Copying files'. What happened?
This Windows was converted from Parallels Virtual Hard Disk and cloned to Bootcamp disk.
Will this affect the installation process?
Cuz' I don't get any Windows disc.

I'm sorry, I mean ' Searching drivers for device' or something

Oracle 11g R2 Grid Infrastructure Installation stuck on 65%

Dear All,
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
Many Thanks
Nukesh

No nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
Actually I found/resolved the problem and forgot about this post.
It happens that in staging my server, iptables was enabled which stopped the progress.
I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
Thanks

Installer stuck....please help =[

I just got the 5300 xpress music phone and i decided to come here and install the nokia PC suite.
I have windows vista, but if you need anymore information just ask.
I get to the installer, and it goes smoothly until the "installing connectivity cable driver" at 61% and it won't go anymore =[

Hi,
How long did you wait when "installer stuck" happen?
Anyway, see this:
/discussions/board/message?board.id=pcsuite&message.id=16560

I'm trying to upgrade to itunes 10.x on Windows 7 Pro. The installation stuck at the stage "Registering iTunes automation server". I removed the Antivirus software and re-install iTunes again. But still get same problem. Any solution?

I was trying to upgrade to itunes 10.x on Windows 7 Pro. The installation stuck at the stage "Registering iTunes automation server". I removed the Antivirus software and re-install iTunes again. But still get same problem. Any solution?
JA

Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P.

Installation stuck in a loop

I went to NBC Sports on line to watch sports. It appeared I needed to download an app to view the game. After several tries (installing the app without it letting view the game) it finally became clear that the Download had nothing to do with viewing a game. But the installation of the app has become stuck in the system. Every time I shut the computer down (MacBook Air — Mavericks) a message appears asking me to "Continue Installation or Abort". I've tried both, but the situation always returns. There were two Downloads: one was something called RAR, the other finally revealed itself to be an app to manage music on the computer.
I Trashed everything I could find, but it did not good. Any ideas?
I do not see a community that seems to fit, so am using Apple works

Problem description:
A botched (and unwanted) Installation tries to finish its job each time I shut the computer down. The problem may also account for my Video Download Helper (Firefox) no longer working. THANKS FOR YOUR HELP.
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 8:51:02 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Air (13-inch, Early 2014) (Technical Specifications)
    MacBook Air - model: MacBookAir6,2
    1 1.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery Health: Normal - Cycle count 136
Video Information: ℹ️
    Intel HD Graphics 5000
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.9.4 (13E28) - Time since boot: 0:56:5
Disk Information: ℹ️
    APPLE SSD SD0128F disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 120.47 GB (45.66 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Adware: ℹ️
    Geneio [Remove]
Launch Agents: ℹ️
    [loaded]    org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.genieo.completer.download.plist Adware! [Remove]
    [loaded]    com.genieo.completer.ltvbit.plist [Support]
    [loaded]    com.genieo.completer.update.plist Adware! [Remove]
    [loaded]    com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
    Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 537 - SDK 10.9
User internet Plug-ins: ℹ️
    RealPlayer Plugin: Version: Unknown [Support]
Safari Extensions: ℹ️
    Omnibar [Installed] Adware! [Remove]
3rd Party Preference Panes: ℹ️
    Flash Player [Support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        65%    firefox
        59%    plugin-container
         4%    WindowServer
         3%    coreaudiod
         1%    hidd
Top Processes by Memory: ℹ️
    984 MB    plugin-container
    348 MB    firefox
    73 MB    com.apple.IconServicesAgent
    52 MB    WindowServer
    47 MB    mds_stores
Virtual Memory Information: ℹ️
    58 MB    Free RAM
    1.69 GB    Active RAM
    1.65 GB    Inactive RAM
    652 MB    Wired RAM
    879 MB    Page-ins
    4 MB    Page-outs
Diagnostics Information: ℹ️
    Jan 21, 2015, 07:55:33 AM    Self test - passed
    Jan 18, 2015, 11:17:55 PM    /Library/Logs/DiagnosticReports/Google Earth_2015-01-18-231755_[redacted].hang
    Jan 18, 2015, 11:00:44 PM    /Library/Logs/DiagnosticReports/Google Earth_2015-01-18-230044_[redacted].hang
    Jan 18, 2015, 07:25:06 PM    /Library/Logs/DiagnosticReports/Google Earth_2015-01-18-192506_[redacted].hang
    Jan 18, 2015, 07:16:24 PM    /Library/Logs/DiagnosticReports/Google Earth_2015-01-18-191624_[redacted].hang

Windows 10 Technical Preview installation stuck in a restarting loop

Hi all,
I had win10 running pretty well until I had to roll back to Win8 which was originally installed on my laptop when I purchased it. Long story short, the recovery had some issues and it gave me an error about some unexpected error during installation. So I
changed the setup.exe value of one of the registries. Now, the error is gone but it keeps on restarting after the "Installing Windows 10 Technical Preview" screen. any ideas???
thanks!
--Ben

Hi Yolanda,
thanks for the reply.
I did various things. i think i picked the option to go back to previous windows version which turned out to be the previous Win10 build. so i tried again with something else (i forgot which other options i picked on the Recovery menu...) This is when it
crashed and failed to reinstall windows. it showed me a screen with different options, one of them was to go back to the manufacture version. so i picked that but it told me to insert the DVD which didn't come with the laptop when i purchased it. so i
tried again with the previous windows version option and this is when the error occurred. here is the error and how i was told to fix (http://heresjaken.com/the-computer-restarted-unexpectedly-or-encountered-an-unexpected-error-during-installation-of-windows/)
after changing the registry, the error is gone but it's in a loop of attempting to install windows 10 TP and restarting windows. i can't even get to the BIO to change the booting options.... if there is a way, please let me know, i can download the ISO from
the internet and boot it off from there.
i do understand this is a preview version and my laptop is not my primary computer. i had some issues with the Cisco AnyConnect client. so i had to roll back.... yes i do have all my files backed up.
thanks!
--Ben
-Ben

Satellite A660-11M stuck in loop during the recovery installation

Hi, all.
I am now running a recovery procedure for A660-11M. I used a recovery CD bought from Toshiba.
Everything went well until the recovery is stuck in the loop of '*Now Rating System Performance*'.
I found a similar case where a person solved problem by forced restart. I did, too, but when it turned on, the loop started again.
I am wondering if there is anyway to stop this rating. It does not seem very important in the end.
Thank you.

Hi
You should run the HDD recovery again.
This means you have to power up the unit
- press F8
- then choose Repair my Computer
- Then choose HDD recovery and
- Recovery to out of the box state.
Greets

Full recovery from disk "Windows cannot complete the installation"? stuck in loop!

I have a satellite A305-6916 in which the hard drive failed, and I did not have recovery media. I bought a new hard drive, and ordered recovery media. I installed the new hard drive...the old one was a WD 320gig that I replaced with a new WD640gig....and I booted the recovery disc. It went through the whole process for like an hour until it got just past where it said "please wait while windows sets up your computer" and then to the Vista splash screen, and then I got an error message with no number that said " Windows cannot complete the installation. To Install Windows on this computer, restart the installation" Then a message followed about Windows will not operate with the hardware on this computer. Now it just endlessly boots to the first message. I click ok, and it restarts, gets to the splash screen and displays the message. I was running vista 64bit with 4megs of ram. If they sent me the Vista32bit recovery disc, could this be my problem? The disc says it is 64bit????

Hi R98,
I saw your post and I will be happy to help. Yes, you will need to do this on a different computer. As for the 32 or 64 bit question; you can't tell from the BIOS but you can use certain information to look up the processor but the install will have to go successfully first.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Extension Installer in infinite loop

Hi,
I'm trying to use an Extension Installer to install some extra files for my application. I've searched the forum for problems with the Extension Installer and I've seen a few posts, even the same problem I'm having. But none of the suggestions have helped.
When I run the Extension Installer locally on my own machine it works just fine. However when I move the code to access over the internet the extension installer gets stuck in an infinite loop and my application will never start. And yes, my installer ends with eis.installSucceeded(false).
Based on other messages in the forum, these are some of the things that I've tried, to no avail:
1. Add System.exit(0) as the very last statement in my installer.
2. I don't specify a port in my codebase in either the application jnlp or the extension jnlp.
3. The webserver is running on the default port (80).
4. Tried adding "javaws.cfg.forceUpdate=false" to my javaws.cfg file.
I'm using JWS 1.0.1_02. My web server is IBM HTTP Server. The machine that I'm trying to install to is running W2K.
Anyone have any suggestions?
Thanks,
Beth

The funny thing is that with you it seems to happen
during
one JWS launch session.
So I wonder why JWS will run k instances of your
Extension
installer.
You don't have an <extension> tag in the jnlp file of
your extension
installer, creating an infinite recursion?
Yes, I wonder why I get multiple instances of the Extension Installer. And also that it works fine if everything is running on my local computer. If I just change the codebase and run everything over the internet is when I get it an infinite loop. Any ideas would be greatly appreciated.
If it will help, here are my .jnlp files:
Extension:
<?xml version="1.0" encoding="utf-8"?>

<jnlp     spec="1.0 1.0+"
     codebase="http://apsrv176.ctt.com/bethTest" >
     <information>
          <title>NGS SpellChecker Installer</title>
          <vendor>Vendor</vendor>
          <homepage href="docs/help.html"/>
          <description>SpellChecker Installer</description>
          <description kind="short">Install the SpellChecker files</description>
     </information>
<security>
<all-permissions />
</security>
     <resources>
          <j2se version="1.2"/>
          <property name="ngs.root" value="NGS"/>
          <property name="spellchecker.home" value="SpellChecker"/>
          <jar href="SpellChecker/SpellCheckerInstaller.jar"/>
     </resources>
     <installer-desc main-class="com.ngs.spellcheckerinstaller.SpellCheckerInstaller" />
</jnlp>
Main:
<?xml version="1.0" encoding="utf-8"?>

<jnlp     spec="1.0 1.0+"
     codebase="http://apsrv176.ctt.com/bethTest" >
     <information>
          <title>NGS Application</title>
          <vendor>Vendor</vendor>
          <homepage href="docs/help.html"/>
          <description>NGS</description>
          <description kind="short">NGS</description>
          <icon href="images/ngs.jpg"/>
     </information>
     <security>
          <all-permissions/>
     </security>
     <resources>
          <j2se version="1.2" initial-heap-size="64m" max-heap-size="64m"/>
          <property name="ngs.root" value="NGS"/>
          <property name="spellchecker.home" value="SpellChecker"/>
          <jar href="jars/NGSMainForm.jar"/>
<snip... lots of other jars>
          <nativelib href="jars/bridge2java.jar" />
          <extension href="Third_Party_Jars.jnlp" />
     </resources>
     <resources>
          <extension
               name="SpellCheckerInstaller"
               href="SpellCheckerInstaller.jnlp">
          </extension>
     </resources>
     <application-desc main-class="NGSMainForm"/>
</jnlp>

Installation stuck in loop

Similar Messages

Maybe you are looking for