Installation Test Automation

Hi All,
When I try to run the test automation install it tells me to
choose a folder to unzip the files to but it doesn't accept ANY
folder.
Help!!!

I am in Japan, using English Windows. The installer GUI is English, but the native Flash Control Panel shows in Japanese.
Flash Player 11 seems to have fixed that problem; CP shows in English.

Similar Messages

I am seeking information on thermal cycle testing automation.

I am seeking information on thermal cycle testing automation. I am using Labview 7 to perform an 8 cycle thermal test with a performance test at -25C and 65C with an end-of-line test at the end of the 8 cycles. I am looking for a way to automate. I have the equipment to control the PLC temp. controller. I just need to know if anyone has encountered this type of test. Thanks.

Hi Dennis,
Thanks a lot for your suggestion and example.Well I am finding bit hard to put all codes together.But I am sure that its doable with the technique you told.I am sending you my code for temperature controller which is basically PID based temperature controller and controls one temperature at a time.What I need is to put it in event structure which you used for your application and achieve three different setpoints which are controlled through this code of temperature controller for specified length of time.
I have also written code which you send it to me for different setpoints and dwell times.Finally what need to be done is to put these code together in order to achieve my goal.I am sending you all these codes,I hope they make sense to you.I will be highly thankful to you for providing me your help and suggestions in order to achive thermal cycling with labview.Thanks a lot for giving your valuable time on it.
Please find attached codes.
Take care
bye
Ahsan
Attachments:
TEMP_CONTROLLER1.vi ‏266 KB
TEMP_CONTROLLER.vi ‏266 KB
SETPOINTS.vi ‏12 KB

Seeking Labview/C/C++/Linux/Telecom Test Automation Engineer in the Denver Area

http://www.aircell.com/company/careers/senior-test-automation-engineer-0
The Senior Test Automation Engineer will be responsible for leading the development of test automation tools, selection of new test technologies, and automation of new and existing hardware and software test cases, supporting multiple engineering teams. In addition, this position is responsible for on-going training and test automation tool skill development for other Aircell Test Engineers. In addition to doing hands-on development, this individual will manage tools development projects and lead a team.
Fluency in Python and LabView scripting, development in Linux operating system environment, and Unix shell;
• Software configuration management skills and tools, Subversion experience preferred;
• Strong background in communication protocols including use of protocol analysis tools
• Leadership skills including team and project management;
• Data networking administration skills;
• Industry experience in wired and wireless data communication and telecommunication and VoIP/SIP;
• Linux server, SVN and HP Quality Center administration skills a strong plus;
• C/C++ and Java development skills a plus

Dearest Friend,
I AM most interested in this position. PLEASE forward, to, me the (MAIL ID) ID for which I send the RUSME for this position and attacha lll conntact detailes available at this time.
We are requiiring you prom,t and cisrterous replies to this topic .
I have immense and broad knowledge in the LAVIEW DISTRICT
Many Greatful Thanks to you and all,
Sajib Nowdhury

LabVIEW test automation engineer - Los Angeles, CA

Start up aerospace company (pre-IPO) seeks one or more well qualified test automation engineers experienced with LabVIEW software development. Position responsibilities would include working with engineers to specify test equipment and develop control software for board level or system level testing. Important job requirements:
- BS degree in an engineering discipline. Graduate degree a plus.
- U.S. citizen willing to locate to the Los Angeles area.
- Candidate should be able to demonstrate basic technical know-how (math, physics, engineering, etc) and possess hands-on skills. Experience with harness and simple circuit design is a plus.
- Candidate must be comfortable with solving open ended problems and tasks. Candidate should communicate very well with other engineers.
- Applicant should have completed at least several LabVIEW projects and be able to discuss in detail each aspect of the project.
- Experience with aerospace hardware and avionics test requirements is desireable but not required.
- Enthusiasm for a fast paced work environment with lots of responsibility and opportunity for growth.
We are seeking full time employees but will consider contract assignments.
If interested, please email your resume to me at matt.soule 'at' spacex.com. Thanks.
Matt Soule

Dearest Friend,
I AM most interested in this position. PLEASE forward, to, me the (MAIL ID) ID for which I send the RUSME for this position and attacha lll conntact detailes available at this time.
We are requiiring you prom,t and cisrterous replies to this topic .
I have immense and broad knowledge in the LAVIEW DISTRICT
Many Greatful Thanks to you and all,
Sajib Nowdhury

Senior Test Automation Engineer LabView Perm Position in San Diego

Senior Hardware Test Automation Engineer- LabView
Company is, headquartered in San Diego, California, is focused on developing technology for the continuous monitoring of glucose in people with diabetes. Company is committed to developing technologies and products that improve the lives of people with diabetes and is currently looking for a Senior Test Automation Engineer.
Summary
This position is ideal for a highly self-motivated individual with software and hardware skills to strategize and design custom tools and test automation to meet design, cost and delivery targets.
As a Senior Test Automation Engineer, you’ll be bridging R&D to volume production by creating functional tests using LabView for production of Company products.
Duties & Responsibilities:
Create automated processes and test systems. Transition new products from prototype to production. Participate in design reviews. Develop test plans. Develop test software and hardware platforms. Review designs for manufacturability, improving cost & quality and increasing yields. Programming in high-level languages or scripting languages to control T&M Instruments and electromechanical systems. Program motion control and data acquisition systems. Develop test strategies to drive test time reduction. Develop test requirements and procedures in concurrence with design requirements. Document test procedures and results in conformance with ISO and FDA standards.
Required Qualifications:
Bachelors or Masters Degree in Electrical Engineering or similar discipline. At least 7 years experience in test automation, expert level designing and developing with LabView. Experience with relational databases. Experience with C#. Solid technical and theoretical background of electronics hardware and software. Demonstrated ability to work effectively in a fast-paced, team oriented, multi-tasking environment and to be willing to do what it takes to meet project commitments and deadlines. Good interpersonal skills, including good technical communication skills, must be self-directed, self-motivated and be able to work in a cross-functional team environment. Ability to work in a highly dynamic environment. Advanced knowledge in setting up ATE test suite running on LabVIEW. Experience leading projects and also interfacing with engineering, suppliers and contract manufacturer. Experience in RF is highly desirable. Advanced software-programming skills. Experience in statistical data analysis tools. PCB in-circuit and functional test knowledge is an asset. Experience in all facets of qualification, including environmental, HALT, and ESD testing would be an asset.
Please send resume to: [email protected]: 951-303-1841. Company offers an excellent benefits package and great work environment.
Retained Search Firm specializing in TElecom, Medical Devices, Biomed, BioTech, Ate, Semi, Legal, Medical, Real Estate, Commercial Real Estate, IT

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 2 years of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Please find attached resume.
Thanks & Regards
Anil Punnam
Attachments:
Resume_Anil.pdf ‏1 KB

JUnit3.8.1 Fails Installation Test?

Can I get JUnit help here or is there a better place to go?
The installation test failes with the following:
D:\Program Files>java junit.textui.TestRunner junit.samples.AllTests
Class not found "junit.samples.AllTests"This class currently is located at D:\Program Files\junit3.8.1\junit\samples.
I down loaded the current version JUnit3.8.1 zip file and extracted it to
D:\Program Files using folder names. This created a subdirectory \junit3.8.1
I created a system variable JUNIT_HOME and set it to
D:\Program Files\junit3.8.1I then set classpath to:
C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\Msbase.jar;C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\Msutil.jar;C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\Mssqlserver.jar;%JUNIT_HOME%\JUNIT.JARThese are the instructions in the FAQ on the SourceForge site.
Are the environment variable names case sensitive?
How do I get past this problem? Everything looks good to me.
You help would be appreciated.
Thanks
Jim

The base4 directory for your tests are under D:\Program Files\junit3.8.1\ so this will be needing in your class path.
try
java -cp "D:\Program Files\junit3.8.1\" junit.textui.TestRunner junit.samples.AllTests

How to expose to test automation dynamically generated third party component

We need to expose to test automation extended check box (which is not our component), that is dynamically generated and works together with tree.
So, our application contains the following code:
import org.sepy.ui.CheckBoxExtended;
checkBox = new CheckBoxExtended();
Then all properties of check boxes are set dynamically.
These check boxes are used with the tree, to select any of its nodes.
When using test automation tool (we are evaluating RiaTest), automation tool agent sees the tree, but it does not see checkboxes, and therefore selection of tree node cannot be automated.
Is there any way to make automation tool agent see this check box? There is a procedure for instrumenting custom components, but this is like third party component.
Thanks,
Miroslaw

I am beginning to think that there is no solution to my problem. Let me better define the problem:
1. Automation tool does not see extended check box.
2. The container of extended check box is standard tree (nothing to instrument).
3. Extended check box is third party component which was derived from standard button, and not standard check box (theoretically nothing to instrument again).
4. Extended check box was used in item renderer class of the tree.
Maybe elements used in item renderers cannot be exposed to automation tools (I have tried FlexMonkey and RiaTest, but they both failed)?

TREX installation test error

Experts,
I've finished installing TREX on Unix and an attempting to run the Python installation check script:
runInstallationTest.py
I'm getting this error:
Traceback (most recent call last):
File "/usr/sap/TRX/TRX00/runInstallationTest.py", line 4, in ?
    from testbase import TestBase, TestError
File "/usr/sap/TRX/TRX00/testbase.py", line 6, in ?
    import fuzzypy
File "/usr/sap/TRX/TRX00/fuzzypy.py", line 897, in ?
    from _fuzzypy import *
ImportError: No module named _fuzzypy
1. I run TREXSetting.sh to set the environment.
2. I ensured my permissions and ownership are correct as sidadm.
3. I moved runInstallationTest.py, testbase.py, fuzzypy (directory with contents) and all other fuzzy* files I could find into my <trex_home> directory.
Here's the current directory listing:
-rwxr-xr-x   1 trxadm   sapsys        11764 Sep 11 2006 build_ssl.sh
-rwxr-xr-x   1 trxadm   sapsys          460 Sep 11 2006 TREXAdmin.sh
-rwxr-xr-x   1 trxadm   sapsys           76 Sep 11 2006 scripts.lst
drwxr-xr-x   2 trxadm   sapsys          256 Mar 12 14:12 sec
drwxr-xr-x   2 trxadm   sapsys          256 Mar 12 14:12 log
drwxr-xr-x   3 trxadm   sapsys          256 Mar 12 14:12 data
drwxr-x---   2 trxadm   sapsys          256 Mar 12 14:13 doc
-rwxr-x--x   1 trxadm   sapsys         5630 Mar 12 14:14 TREX
-rwxr-x--x   1 trxadm   sapsys         1350 Mar 12 14:14 TREXSettings.sh
-rwxr-x--x   1 trxadm   sapsys         1091 Mar 12 14:14 TREXSettings.csh
drwxr-x---   3 trxadm   sapsys          256 Mar 12 14:15 cloneInst
drwxr-xr-x 12 trxadm   sapsys         4096 Mar 13 08:43 exe
-rw-rr   1 trxadm   sapsys         2617 Mar 13 10:38 dev_rfc.trc
-rw-rr   1 trxadm   sapsys       160402 Mar 13 10:44 rfc835720_00001.trc
drwxr-xr-x   2 trxadm   sapsys         4096 Mar 13 13:42 fuzzypy
-rwxr-xr-x   1 trxadm   sapsys        60839 Mar 13 13:43 testbase.py
-rwxr-xr-x   1 trxadm   sapsys       102748 Mar 13 13:45 runInstallationTest.py
-rw-rr   1 trxadm   sapsys        51951 Mar 13 13:46 testbase.pyc
-rwxr-xr-x   1 trxadm   sapsys        40666 Mar 13 14:02 fuzzypy.py
-rwxr-xr-x   1 trxadm   sapsys        12758 Mar 13 14:02 fuzzyconst.py
-rw-rr   1 trxadm   sapsys        38592 Mar 13 14:04 fuzzypy.pyc
drwxr-xr-x   6 trxadm   sapsys         4096 Mar 13 14:20 nwkwcs
What am I missing?
Thanks for your help!
Jeff

Hello Experts.
SAP Global Support suggested the following for AIX ver 5.2:
hdodev01:trxadm 13> source TREXSettings.cshhdodev01:trxadm 14> /usr/sap/TRX/TRX05/exe/Python/bin/python /usr/sap/TRX/TRX05/exe/python_support/runInstallationTest.py
[1, 0.001] >> starting runInstallationTest (at Thu Jun 12 07:49:35 2008)
[1, 0.001] args: ()
[1, 0.001] keys: {}
                    <--- INSTALLATION TEST SUMMARY --->
--> Check 01: Show Installation History
+-----------------+----
NR ││ TYPE    ││ INSTALL DATE        ││ SID ││ VERSION       ││ BUILD
+-----------------+----
+-----------------+----
0 ││ install ││ 2008-06-08 13:48:07 ││ TRX ││ 7.0.06.00     ││ 7006000420
+-----------------+----
1 ││ update ││ 2008-06-10 13:22:31 ││ TRX ││ 7.0.41        ││ 7041000503
+-----------------+----
--> Check 02: Ping TREX Services
+--------+----
STEP ││ ACTION              ││ SPECIFICATION                ││ RESULT
+--------+----
+--------+----
01/04 ││ ping indexserver1   ││ host=hdodev01 port=30503     ││ OK
+--------+----
02/04 ││ ping nameserver     ││ host=hdodev01 port=30501     ││ OK
+--------+----
03/04 ││ ping preprocessor1 ││ host=hdodev01 port=30502     ││ OK
+--------+----
04/04 ││ ping queueserver    ││ host=hdodev01 port=30504     ││ OK
+--------+----
--> Check 03: Check TREX Web Site
+--------+----
STEP ││ ACTION              ││ SPECIFICATION                ││ RESULT
+--------+----
+--------+----
01/01 ││ check web site      ││ post xml request             ││ skipped
+--------+----
--> Check 04: Check Process size
+--------+----
STEP ││ ACTION              ││ SPECIFICATION                ││ RESULT
+--------+----
+--------+----
01/01 ││ Process size        ││ cur = 2047MB > min = 1900MB ││ OK
+--------+----
--> Check 05: TREX Services and Third Parties Version
+--------+----
COMPONENT        ││ COMPONENT_VERSION ││ COMPONENT_BUILD ││ CHANGE_LIST
+--------+----
+--------+----
indexserver1     ││ 7.00.41.00        ││ 700.41.144682   ││ 144682 (700_REL)
+--------+----
nameserver       ││ 7.00.41.00        ││ 700.41.144682   ││ 144682 (700_REL)
+--------+----
preprocessor1    ││ 7.00.41.00        ││ 700.41.144682   ││ 144682 (700_REL)
+--------+----
queueserver      ││ 7.00.41.00        ││ 700.41.144682   ││ 144682 (700_REL)
+--------+----
PYTHON           ││ 2.4               ││ 216             ││ ---
+--------+----
FILTER           ││ 8.2.0             ││ ---             ││ ---
+--------+----
LEXICON          ││ 3.7.3             ││ ---             ││ ---
+--------+----
--> Check 06: Check TREX Healthiness
+--------+----
STEP ││ ACTION              ││ SPECIFICATION                 ││ RESULT
+--------+----
+--------+----
01/20 ││ clean up index      ││ clean up indexId = abc        ││ OK
+--------+----
02/20 ││ create index        ││ create indexId=abc            ││ OK
+--------+----
03/20 ││ processing file     ││ content of www.python.org     ││ OK
+--------+----
04/20 ││ processing file     ││ content of www.pythonware.com ││ OK
+--------+----
05/20 ││ processing file     ││ content of python.oreilly.org ││ OK
+--------+----
06/20 ││ processing file     ││ content of www.jython.org     ││ OK
+--------+----
07/20 ││ exact search        ││ query = ['jython']            ││ OK
+--------+----
08/20 ││ fuzzy search        ││ query = ['jyto']              ││ OK
+--------+----
09/20 ││ linguistic search   ││ query = ['questions']         ││ OK
+--------+----
10/20 ││ clean up index      ││ clean up indexId = abc        ││ OK
+--------+----
11/20 ││ create index        ││ create indexId=queueId=abc    ││ OK
+--------+----
12/20 ││ set queue parameter ││ bulkIndex=bulkOptimize=4      ││ OK
+--------+----
13/20 ││ processing file     ││ content of www.python.org     ││ OK
+--------+----
14/20 ││ processing file     ││ content of www.pythonware.com ││ OK
+--------+----
15/20 ││ processing file     ││ content of python.oreilly.org ││ OK
+--------+----
16/20 ││ processing file     ││ content of www.jython.org     ││ OK
+--------+----
17/20 ││ wait processing     ││ elapsed time: 14.021 sec      ││ OK
+--------+----
18/20 ││ exact search        ││ query = ['jython']            ││ OK
+--------+----
19/20 ││ fuzzy search        ││ query = ['jyto']              ││ OK
+--------+----
20/20 ││ linguistic search   ││ query = ['questions']         ││ OK
+--------+----
-> Test Script Error Count: 000
hdodev01:trxadm 15>

RE: Test automation tools for Forte applications

Mark,
There is a basic automated testing program already
supplied by Forte in the examples. It is called
AutoTest.Pex. It records events and can replay them.
It can be a bit tricky and is a bit basic, but
may have some of the functionality that you want.
This is specifically for window / widget testing.
Hope this helps,
Kerrie Vickers
Forte Consultant
PricewaterhouseCoopers
Mark Wick Wrote :
Hi,
We are evaluating test automation tools for a Forte client server
application.
Does anybody have experience with testtools for Forte applications or
can even recommend a testtool particulary suitable for Forte
applications.
We want to test GUIs on NT-clients as well as a batch process running
on
a Unix solaris server and accessing an oracle database.
any help appreciated
thanks
Marc WickMazda Australia takes every precaution to ensure email messages are virus free. For complete protection, you should virus test this message.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Mark,
There is a basic automated testing program already
supplied by Forte in the examples. It is called
AutoTest.Pex. It records events and can replay them.
It can be a bit tricky and is a bit basic, but
may have some of the functionality that you want.
This is specifically for window / widget testing.
Hope this helps,
Kerrie Vickers
Forte Consultant
PricewaterhouseCoopers
Mark Wick Wrote :
Hi,
We are evaluating test automation tools for a Forte client server
application.
Does anybody have experience with testtools for Forte applications or
can even recommend a testtool particulary suitable for Forte
applications.
We want to test GUIs on NT-clients as well as a batch process running
on
a Unix solaris server and accessing an oracle database.
any help appreciated
thanks
Marc WickMazda Australia takes every precaution to ensure email messages are virus free. For complete protection, you should virus test this message.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Test automation tools for Forte applications

Hi,
We are evaluating test automation tools for a Forte client server
application.
Does anybody have experience with testtools for Forte applications or
can even recommend a testtool particulary suitable for Forte
applications.
We want to test GUIs on NT-clients as well as a batch process running on
a Unix solaris server and accessing an oracle database.
any help appreciated
thanks
Marc Wick
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

There is also TestComplete by AutomatedQA but it is of
limited usage because it is not mx.automation aware and in many
difficult cases reverts to dumb mouse X,Y recording.
And there is the upcoming RIATest that will be specifically
designed for Flex using mx.automation. Here is the site:
http://riatest.com
Disclosure: I am a RIATest developer.

Siebel Test Automation - Anonymous user

Hi,
We have integrated siebel 8.1.1.7 callcenter_enu AOM with LDAP for authentication of user authentication and are trying to use the same AOM for Test Automation.
change param EnableAutomation=True for comp XX
change param AllowAnonUsers=True for comp XX
When we hit the url
http://hostname/callcenter_enu/start.swe?SWECmd=AutoOn
We could see that the user logged into the system is the anonymous user instead of the actual user being used.
When we do the same with DB authentication AOM, the actual user logs into the system which is as expected.
Could you please let me know how can we set the actual user to logon in LDAP Authenticated AOM.
Regards,
Ajay

Hi
Indeed it is, you need to enable Siebel Test Automation in the Siebel server.
Alex

Script file for test automation.

I have a file “HPE3631A configure output.vi” (DC power supply). This file I downloaded from NI web for using control our DC power supply. I would like to use a script file that can automatically process and configure the output voltage, current parameter? I do not have to click mouse for change the voltage and current parameter. We would like use this script file as one of our test automation.
What format file can use as a script? Is any example file I can use as a reference (it does not have to be HPE3631A).

I don't have an example. You are free to create a script file in any format that you want. To give you a little help, say you have a comma separated file. The first field could be instrument address. The second field could be a function. This might be Initialize, Configure Voltage,Configure Trigger, etc. The following fields could be parameters that you pass. Some functions would require more parameters than others. Look at the number of functions in the driver and see if you want to duplicate them and how many parameters they require or whether you want to break some of them down into something smaller. When you've decided that, then you can determine how to read the file and parse out the commands. Do you want to do error checking here or someplace else? What I mean is, what if the file contains the word "Initilize" instead of "Initialize". What if a voltage parameter is out of bounds?
Like I mentioned, you could have a LabVIEW VI generate the script. Imagine a front panel text ring in which you have listed all of the various functions. If function b is selected, have logic that displays the correct number (and type) of other parameters required. When the selection is complete, click an OK button to display the new step in a table. A table is nothing more than a 2D string array so saving it to a file is then simple.

Need test automation libraries for QTP 10

I need Test Automation libraries like automation_agent.swc, automation_dmv.swc, automation.swc, qtp.swc , automation_flashflexkit.swc to complile the application.
The link (http://www.adobe.com/products/flex/flexdownloads/) in adobe site is not working. Can you please help me to get this SWC files.
I have QTP 10.0, Adobe flash player 11 plugin, Flash player 11 activex and reader 10.1.3.

I am unsure exactly which Adobe product or possibly programing language you are trying to use. Are you trying to utilize Flex? You may want to search the Flex forums or post there if that is the case.

SR Test Automation Engineer with Expert Labview San Diego

CONTACT: [email protected] Call: 951-303-1841
Senior Test Automation Engineer- LabView
CO, Inc., headquartered in San Diego, California, is focused on developing technology for the continuous monitoring of glucose in people with diabetes. CO is committed to developing technologies and products that improve the lives of people with diabetes and is currently looking for a Senior Test Automation Engineer.
Summary
This position is ideal for a highly self-motivated individual with software and hardware skills to strategize and design custom tools and test automation to meet design, cost and delivery targets.
As a Senior Test Automation Engineer, you’ll be bridging R&D to volume production by creating functional test system using LabView for production of CO products.
Duties & Responsibilities:
· Lead creation of automated processes and test systems
· Develop test plans, test software and hardware platforms
· Proactively review designs for manufacturability, improving cost, quality and increasing yields
· Programming in high-level languages or scripting languages to control electronics T&M Instruments and electromechanical systems
· Program motion control and data acquisition systems
· Develop test strategies and procedures in concurrence with design requirements
· Transition new products from R&D phase to volume production
· Document test procedures and results in conformance with ISO and FDA standards
Required Qualifications:
· Bachelors or Masters Degree in Electrical Engineering or similar discipline
· At least 7 years of experience in test automation
· Expert developing LabView applications
· Experience with relational databases
· Experience in statistical data analysis tools
· Solid technical and theoretical background of electronics hardware and software
· Demonstrated ability to work effectively in a fast-paced, team oriented, multi-tasking environment and to be willing to do what it takes to meet project commitments and deadlines
· Excellent interpersonal and technical communication skills
· Must be self-directed, self-motivated and be able to work in a cross-functional team environment
· Ability to work in a highly dynamic environment
· Experience leading projects and also interfacing with engineering, suppliers and contract manufacturer
· Experience in RF is highly desirable
· Experience in all facets of qualification, including environmental, HALT, and ESD testing would be an asset
Retained Search Firm specializing in TElecom, Medical Devices, Biomed, BioTech, Ate, Semi, Legal, Medical, Real Estate, Commercial Real Estate, IT

Hi,
Your reponse indicates a lack of finese !
in Europe you won't even reach the possibles or potentials lists.
If you read the requirement then they need an experienced wireworker. Yet you first registered on this forume 2 years ago !
How does 2=7 ?
Suggest you re -evaluate and respond directly to the appropiate email address, as also requested.
xseadog

QALoad and Siebel testing automation

I'm working on a project where we would like to use QALoad, the customer's standard, with Siebel. So far, we've been able to easily record a simple script where the user creates a new record and saves it. The saved script can be run without any error messages. However, no new record is created.
Has anyone ever used QALoad with Siebel and can they reach out through this forum or by sending me an email at [email protected]
Thanks,
Marc

Adobe's been offputtingly silent on the subject. Anyone
interested should check this thread on flexcoders (
http://tech.groups.yahoo.com/group/flexcoders/message/66918),
which goes into some detail about the license restrictions on the
mx.automation package; a few other alternatives are also discussed.
Marc, from a cursory overview it looks to me like
TestComplete would only be able to simulate keyboard and mouse
events when dealing with the Flash Player--is that true? That can
lead to a pretty brittle automated test environment, because simple
layout changes (which aren't bugs) can really mess up a bunch of
test scripts.

Installation Test Automation

Similar Messages

Maybe you are looking for