Installation Trouble with Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0

Hi All,
I'm having installing this software on my Window's 8.1 64-bit machine. I'm going to Disk1 > Install > Win64 > setup.exe. The Oracle Universal Installer shows up, passes the swap space and monitor checks, and stays on "Preparing to launch Oracle Universal Installer from C:\Users etc.... Please wait ..." for a few seconds. It then promptly closes and does absolutely nothing. I've tried the setup.exe from the Win32 bit folder, and that opens perfectly fine (unfortunately mines 64-bit). I've tried running as Administrator, in compatibility mode (all of them), and even updated Java. Does anyone know of a solution?
Also, I have a 32-bit Windows XP virtual machine installed, and when I tried it there, I encountered the same problem. This time with the 32-bit setup.exe.
Thanks,
Neville

Try
https://hostname:8090/discoverer/viewer
https://hostname:8090/discoverer/plus

Similar Messages

  • JDBC Problem with Oracle 8.1.7. and OC4J  Version 2

    I use the following connection statement with Oracle 8.1.7. and JDeveloper 3 and Apache Server. It works fine.
    String user = "scott/tiger";
    DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
    Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:"+user+"@RDL");
    The same program does not obtain the connection with JDeveloper 9i, OC4J Version 2 and Oracle 8.1.7. I do not receive any error message, no exception is thrown.
    Please help me.

    Hi Avi,
    I had already tried the thin Diriver but after yout help I try again.
    With this thin driver, I received a SQLException which helps me.
    As usual, there were a lot of different problems. The main one was that my default configuration do not use the jdbc/lib817 main jdbc/lib. There is a classe12.jar in these libs that are apparently different.
    Finally, I obtain the connection with the "thin" driver.
    Thank you very much Avi!
    Reni

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?

    How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?
    I do not use command line and tried to use ZapResourceForksAMAub_1.2 which I downloadedand instaled the Zap Resource Forks.action. Next I tried to use their sample copy-zap-rsrc.workflow in Snow Leopardon my Mac Pro. The 3 different steps are displayed in Automator but there is no place to put in which folder (on my deskto) to copy, and remove the resource forks from the graphic files.
    Can sombody please step me through this please please.
                                                                                          W.W.

    Unfortunately, Back to My Mac only works across computers using the same iCloud account.

  • Updated iphone 5 to iOS 6.1.3, now trouble with keyboard not responding correctly and screen zooming in by itself...

    updated iphone 5 to iOS 6.1.3, now I am having trouble with keyboard not responding correctly and screen zooming in by itself...
    Buttons pressing themself...
    Also, my main screen is permanently zoomed in...
    suggestions?

    Double tap the screen with THREE fingers, that should get it back to normal again.
    Then go into Settings > General > Accessibility > Zoom > OFF.
    Not too sure about the keyboard and random button presses though.  Back it up and restore from iTunes, see if that fixes it.

  • HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any

    HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any way to find / prove that I had purchased cs3 and locate a serial number? On my Adobe account it does not show my purchase of cs3 (I am guessing because of the trouble with registering my serial number). I have moved house 3 times since the purchase and am unable to locate the packaging or disk. Is there any way to prove my purchase without any serial number or showing under my Adobe account? Please help! Thanks

    The CS3 discount offer is only for retail online product, it does not include education or volume license purchases. Refer to Terms and Conditions | Adobe
    To check whether you had retail CS3 purchase, we need proof of purchase as well as serial number, without which the issue can not be resolved.
    Regards
    Rajshree

  • Having trouble with momentary delays while scrolling and typing, new problem that seems to be getting worse every day. Mouse?

    Having trouble with momentary delays while scrolling and typing.  It's a new problem that seems to be getting worse every day. Mouse? Internet connection? It's driving me nuts!

    Hi
    Did you find a solution ?
    I have the same problem on my iPhone 4

  • Having trouble with mail..Wheel spins and mail hangs up when mainly when sending

    Having trouble with mail..Wheel spins and mail hangs up when mainly when sending

    Have you many items in outbox? Seen this where a message has a large attachment and I stuck

  • HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

    I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

    You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
    tt2

  • HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g

    Hi,
    My question is HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g. I know how to connect PLUS and VIEWER using a URL. Do i need to install Discoverer Admin. separately on my local machine.
    This is very urgent... Please reply.
    Thanks in advance for your time and answers.
    Jay

    Discoverer Administrator is a client side tool, you must install it on your machine or even you can install discoverer administrator in your server but you must connect through a connection string which you must enter in your tnsnames
    regards

  • Install and config issues with Oracle Portal, Forms, Reports and Discoverer

    For a while now I've been struggling with migrating a testing database to a newer version.
    And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
    What I've got:
    Windows server 2008 R2 64bit
    Oracle 11g database
    Java 6u27 64bit
    JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
    JDK 1.7 64bit
    Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
    PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
    and a hanging up configuration
    Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
    Result - the config froze for approx.18 hours then failed
    There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
    I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?

    Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
    So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
    It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
    the last thing the .out file shows:
    Creating a new AdminServer Object ...
    AdminServer port is 7002
    Starting the domain ...
    LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
    [2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
         ... 18 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 13 more
    progress in calculate progress4
    progress in calculate progress4
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 13 more
    Going to execute executeAfterConfig
    java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
    [2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
    I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
    the other link you mentionned seems to have no relevance yet
    does that clear up anything for you though?
    ..can the lack of SOA suite have anything to do with the problem?

  • Trouble with oracle apex and http server

    I have Oracle Apex 3.2 running with Oracle OHS 10g... when I load big pages... some pages aren't completely rendered... there are incomplete source code when some pages are generated...
    This causes things like the hidden tag that contains the md5 verificator for the page would not generate correctly...
    see this [http://img444.imageshack.us/i/error2le.png/]
    And it causes repercussion in the DML process:
    see this [http://img715.imageshack.us/i/error1d.png/]
    Edited by: Juan David Palacios on 09-jun-2010 8:24
    Edited by: Juan David Palacios on 09-jun-2010 9:44
    Edited by: Juan David Palacios on 10-jun-2010 5:57

    This is frequently caused by failing to meet APEX installation and configuration requirements. Ensure the DAD character set is AL32UTF8 and version of the PL/SQL Web Toolkit >= 10.1.2.0.6.
    The DAD may be at the location indicated in the documentation link below, or it may be somewhere else depending on the local configuration. The PL/SQL Web Toolkit can be checked using the query <tt>select owa_util.get_version from dual</tt> in the SQL Workshop.
    http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/db_install.htm#HTMIG236
    http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/pre_require.htm#BABGBJJD

  • OC4J: Troubles with characters in Reports 9i and JSP

    We are having troubles with especial characters in OC4J. Those problems appear in JSP's and Reports.
    Some information about it:
    - the especial characters in spanish are replaced by strange characters (2 chars for every especial char).
    - this happens with strings from ApplicationResources.properties (we use Struts framework) and NOT with those chars read from database via JDBC.
    - the problem doesn't happen in JDeveloper. It happens when we deploy the application to iAS 9i R2. With reports, it happens both from RWBuilder and local OC4J + RWServlet
    - When we used iAS R1 core version this didn't happen. When we changed to iAS R2 full installation (to be able to use Reports Server) it began to happen.
    Any help about it ?
    Thanks

    Hi Pozo,
    Have you got the solution for the problem specified. Even I'm facing the same problem with Arabic characters.
    Pl. let me know if you've got the solution.
    Thanks,
    Vinod.

  • Trouble with error message on desktop manager

    Hi,
    I am having some trouble with an error message I am getting when I try to sync my 8530 Curve with MS Outlook 2010.  It was working just fine and now I am receiving the error message "error code- 0x80043ade. Check documentation"  Any advice? 
    Thanks!
    Solved!
    Go to Solution.

    I had the same issue when I first tried to synchronize. The issue for me was when the BlackBerry Desktop Software had updated to Version 6, it left the older version - Version 5 - on my computer. If you go into the Control Panel on your computer and uninstall Version 5, and try re-synchronizing, it should work!
    Hope this helps!
    I hope my response helped you! If you like it, give me a kudo!

  • Oracle Streams Between Desktop and Server

    Hi.
    I have a Streams environment defined between a Suse Desktop and a Suse Server.
    Characteristics:
    Desktop Oracle:
    - compatible = 10.2.0.1.0
    - streams_pool_size = 100m
    - job_queue_processes = 2
    - global_names = true
    Server Oracle:
    - compatible = 10.2.0.3.0
    - streams_pool_size = 112m
    - job_queue_processes = 10
    - global_names = true
    After I execute all necessary steps to define Streams in this environment, I execute the following queries and the results is OK: ENABLED, CAPTURING CHANGES, etc.
    select capture_name,status from dba_capture;
    select capture_name,state from v$streams_capture;
    select status,error_message from dba_propagation;
    But now appear the problem: NOTHING is replicating. I do changes in tables of the Source DB e nothing happen in tables of Destination DB.
    Please, how to discover or debug what are happening ?
    Thanks

    Hi.
    After some time, now I have the ERROR_MESSAGE with blacks in the DBA_PROPAGATION. I have these results:
    select capture_name,status from dba_capture; => CAPTURE_NAME ENABLED
    select capture_name,state from v$streams_capture; => CAPTURE_NAME CAPTURING CHANGES
    select status,error_message from dba_propagation; => ENABLED (null)
    The DBLINK between SOURCE and DESTINATION DBs is OK.
    But again, NOTHING is replicating.
    Thanks.

Maybe you are looking for