Installation unsuccessful after many attempts. Please help!
I am running the lastest version of Safari on Mac OS X 10.8.2. Since I updated my Mac I have been unable to view any video content on the web (Youtube, etc). "Blocked Plug-In" appears in the video box and I have tried many times to install the latest version of Flashplayer. When I go to information in system preferences it says that I do have the latest version installed (11.5.502.110), but the same message appears when I try to use it. I have uninstalled and installed Flash and restarted my computer numerous times. I am not sure what to do in order to make this work.
Sunil - I have checked that and everything seems to be as it should be. However, blocked-plug in still occurs when I try and view any content. Please see screen shots below.
Similar Messages
-
Good day! I have an iPod touch 4G and after many attempts I managed to updated it to ver. 6.1.5.
Good day!
I have had an iPod touch version 4.1.2 for almost 4 years and after many attempts I manage to upated it to version 6.1.5.
I then created an account with iCloud so that I could have my backups done directly to iCloud.
I then restore the iPod to the backup I had on my computer but although it copied the photos, notes, contacts tc. it didn't copy the music I had on it.
When I tried to sync my music from my iTunes on my PC I got a message stating that my iPod was previously sync to a DarklordPC, not a clue of who's PC this is and it's the first time this message came up. It gave me the option of erasing the sync of the DarklordPC and go ahead with a new sync, which I did, but it didn't sync at all.
I've retried to sync numerous times and it tries to sync but after a few seconds it just stops.
Can anyone help me please...I'm going crazy without my musicYou should have done this.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Syncing to a "New" Computer or replacing a "crashed" Hard DriveSynced media like apps and music are not included in the iPod backup that iTunes makes and they restore from backup will not restore synced media unless the media is in the iTunes library.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information.
Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
The path already (unsuccessfully) taken;
Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
This did not work because the correct date was greyed out. Restore key was greyed out.Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information.
Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
The path already (unsuccessfully) taken;
Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
This did not work because the correct date was greyed out. Restore key was greyed out. -
Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?
Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard -
I have my brothers icloud account on my ipad and i want my icloud account back I have all my games from my acount but I can see his massages notes etc how can I get my icloud account back I tried so many things please help .???
go to settings and sign out his apple id in the sections i tell you:
1.game center
2.itunes and appstore
3.messages
4.icloud(delete acount;it wont realy delete it will only remove from your ipad)
5.facetime
and then enter your icloud in each and every section -
My installation for Photoshop Elements 12 Failed. I have Windows Vista. I get an error message stating:installer failed to initialize. Please help!!
Error "Installer Failed to Initialize" | Install desktop application | Windows
-
Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?
I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Trial Download - After Initializing Installer NOTHING HAPPENS - iMac Mavericks - Please Help!
I've downloaded the trial and have gotten as far as initialinzing the Installer which begins but then just disappears and nothing else happens. In my DOCK when I "right click" on the Creative Cloud Icon it says "application not responding".
PLEASE HELP.Please try to download & install from :
Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Do not forget to follow "Very important instructions"
Hope it helps you.
Please be logged in as adminstrators with complete permission to download & install, also check the compatibility of the version of Mac with the CC.
Regards
Rajshree -
I have upgraded to ios6 after which I lost my contact numbers please help
I am furious and super sad. I spent the entire day trying to recover my data after it told me to update my phone. I did update it and I have lost everything. It went into recovery mode and I tried it all. I almost bought the software mentioned above but because I did not get it to work on neither PC and MAC in demo mode, I was certain it would not work in full mode. I am pretty sure Apple corrupted my system while updating it therefore none of these tricks did work for me. I am trully upset, I am on parental leave and I had all my beautiful photos, videos on there are all gone.
Reading all day on forums, this issue is more than common. It is exceptional that nothing is done on the company side to prevent it.
Super sad. But there are lots of third party software that have been developed to help this serious issue. Too bad none of them worked for me.
iphone is the only phone that does not allow anyone to select the photos right from the drive and get them. it has to go through this annoying itunes process to sync (and it has to be the right associated machine, the right itunes, it is super slow, etc.), therefore it is very common for people to loose their data because they just dont have time to go through this long annoying process regularly. -
Screen Blinks for a second straight after login. Please Help!?
First, these are my system info;
Product name: HP ENVY TouchSmart 15 Notebook PC
Product number: F6C80PA#ABG (0 is a zero not an oh)
Keyboard revision: KBC Version 93.51
Total memory: 8.00 GB
Processor name: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
OS Name: Microsoft Windows 8.1
OS Version: 6.3.9600 Build 9600
System Type: x64-based PC
And, these are my graphics drivers installed;
Graphics device 1: NVIDIA GeForce GT 740M
Installed Drivers: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version: 9.18.13.4052
Driver: c:\windows\system32\drivers\nviddmkm.sys
Graphics device 2: Intel(R) HD Graphics 4600
Installed Drivers: igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igdumdim32, igd10iumd32, igd10iumd32
Driver Version: 10.18.10.3304
Driver: c:\windows\system32\drivers\igdkmd64.sys
Current resolution: 1920 x 1080
Refresh rate: 60
so I have this smart alternating switch thingy for my graphics which i suppose that
the screen utilizes either of these two depending on the demand for graphic resources
e.g. it switches on Intel HD graphics 4600 for displaying low-qual and NVIDIA GeForce GT 740M for displaying high-qual
to save power consumption or something that's as far as I know about my display drivers.
My laptop is reasonably new I think it's less than a year old
so i'm a bit overly pissed right now that my laptops showing symptoms of wearing.
so as the title suggests I've been noticing that when I startup and input my password,
and just as I press enter, the whole login screen blinks once very briefly and then loads up the desktop.
I know this seems only a minor issue and surely i have no major problems with running the machine
but I've been seeing forum posts of people having the same issue
and that it's a problem associated with malfunctioning graphics drivers.
So I thought maybe if the screen blinks before loading up the display,
then whatever media that I load up afterwards would not be displayed properly, since the driver is not working properly.
And since I believe that my NVIDIA display drivers are certainly capable of displaying some high graphics material
I thought maybe that I may be trashing the benefits of using a reasonable graphics card by not fixing this problem.
So I was just wondering if there's a way to resolve the blinking screen before startup problem,
which I believe is most likely to be indicating that my machine is not correctly detecting the display drivers installed
and hence is not showing any media as good as they should be showing.
I guess maybe I'll have to re-install the graphics drivers,
but I'm not sure if I would be luckly enough to run a "clean" re-install for "Both" the Intel HD Graphics and NVIDIA Geforce Graphics without confronting any technical disasters (i.e. me wrecking my machine)
So please help me with this!
and if a re-install is needed as such, please provide as many minute details as possible.Hello @Aster_Wales,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how there is an issue of image flickering after you log in to your computer, and I would be happy to assist you in this matter!
To ensure that your notebook's drivers are up to date, I recommend following this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). This should help with returning your system's original software and hardware drivers. To update these new drivers, I also suggest following this resource on Using HP Support Assistant (Windows 8).
If you still see your screen flicker after logging in, I recommend performing a system restore to a point before the screen started to flicker. This can be done by following this document on Using Microsoft System Restore (Windows 8).
Should the screen continue to flicker after using a restore point, I recommend performing a backup and recovery of your Operating System. This can be accomplished by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP System Recovery (Windows 8). This should help to recover your system back to factory defaults.
If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Hypervisor installation fails after three attempts to complete
My attempts to add the Hypervisor role to a Server 2008 R2 installation on a Dell PowerEdge 310 with a perc 6i/700 raid controller, ends after three reboots with the message, "Three attempts to complete the installation have failed. The installation will
not be attempted again. Please restart the server and try to install the roles, services or feature again." When I add the role again, I get the same error message after three reboots. The installer retracts the installation so there is no role to remove.
I succeeded in installing the dedicated hyper-V server on this exact machine and set up several virtual machines so I doubt there is a hardware incompatibility with the hypervisor role. I succeeded in adding the Hyper-V role on another server (Dell T110)
from the same download of the installation files so I doubt the download is corrupt. The successful installation required 2 reboots. I don't see anything in the ServerManager log that indicates what the problem is.
During the reboot there are things that are supposed to happen, is there a way to find the list and track the activity before I have access to the operating system? I'm feeling there is something minor that's blocking the installation and if anyone has hints
to try I'd appreciate hearing them.
ThanksI disabled the two drivers and tried to install the Hyper-V roll again. I set Process Monitor to record the boot action during the re-boot during which the error messages appear. The installation failed and about the time the failure message appeared, There
are a lot of "Results" of "Buffer Too Small" or "Buffer Overflow" in reference to registry entries. Some registry entries refer to AMD64 which is not this computer, this has an Intel processor.
These are two sequential Process Monitor entries:
1214448 3:26:18.8703957 PM TrustedInstaller.exe 992 RegQueryValue HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-hyper-v-vstack-synthnic_31bf3856ad364e35_none_c32726034e5ef98f\6.1\(Default)
BUFFER TOO SMALL Length: 0
the failure is usually followed by an identical entry:
1214449 3:26:18.8704093 PM TrustedInstaller.exe 992 RegQueryValue HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-hyper-v-vstack-synthnic_31bf3856ad364e35_none_c32726034e5ef98f\6.1\(Default)
SUCCESS Type: REG_SZ, Length: 30, Data: 6.1.7601.17514
This is getting way more interesting than I want to see! -
Cisco SX20 Call drops after 15 minutes Please help urgent !!
Hi All,
We have Below scenario
SX20----> MCU<----- Polycom
SX20 -----> Polycom
Issue: When we make a Call from SX20 to Polycom IP to IP call or even using MCU Cisco SX20 gets disconnected after fixed interval ( 15 - 20 minutes)
Calls from Other endpoints ---> Polycom to polycom with MCU and also 1:1 ,1: multiple over MCU works fine.
Only issue is when Cisco SX20 comes in to the picture.
Please sugest is it a known issue?
Or doi we have to update firmware/licenses or any other software in cisco SX20?
Or is it a bug?
Or do we need to check on firewall level
The SX20 has the latest firmware already.
Please help !!!!!!!!
Regards,
AjithAs Martin has said above, the 15 minute disconnection issues are usually a network issue.
Are all your devices on the same LAN, or are they at different locations? Are you using any call control (VCS/CUCM), or are the devices standalone? What protocol are you using (H.323/SIP)?
If you're using NAT, have you got the NAT settings set up correctly on your devices?
What model device is the Polycom? Is the software on the Polycom up to date?
There are many questions which we can ask, but need to understand your environment a little more.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate. -
Q10 stuck at reboot after software update - PLEASE HELP
Hello
I was checking for software updates for my Q10 yesterday and was informed that there is a new update
I clicked on download and install, and it asked me to reboot when it was done. After that it loaded very slowly until it reached 99% 6 hours later and it remained like that for 12 hours
What I did this morning was remove the battery and sim card and I reinserted the battery, the same thing happened again and it is moving very very slowly
Can you please help?? I would rather find away in which I do not loose my BBM contacts since I have not backed up my phone...are the contacts stored on my blackberry ID or will I loose them if I reset the phone?
Thank you very muchIt finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help -
Itunes 10 Installs but won't open - Please Help
I had Itunes 10 installed working on my computer. I installed a program which also installed an older version of Quicktime which I think was version 6.5. The next time I tried to open Itunes it said I needed verion 7.5 of Quicktime to open Itunes please reinstall Itunes. Now comes the problem. I have installed and uninstalled Itunes about 10 times, everytime it install ok but does not open when I click on the icon. The itunes.exe file opens in task manager for a few seconds then closes. I have searched a few places for solutions with no avail. I have tried the correct order of removing apple programs and deleting temp folder and internet cache. I have tries msconfig but can't find any of the programs which have affected other users. I have tried creati9ng another user account for windows but Itunes still won't open. Can anyone please help. My computer is Windows 7 32 bit. Thank in advance.
No, the program I installed was Winavi MP4 which coverts video to ipod psp format etc.
Ack, that one's just as bad. It's been causing this sort of grief for iTunes users for over five years now.
What it has probably done here is drop old versions of QuickTime componentry in unorthodox locations on the PC (usually down in your operating system files). So we're going to go looking for that.
First we'll adjust some view settings on the PC.
1. From the Start menu, click Open.
2. In the Organize menu, click Folder and Search Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now, in Computer, open your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)
Maybe you are looking for
-
I had a few questions regarding iCloud. My iPhone 4 recently broke and i didn't realize that I had to manually activate iCloud in order to back up my files, so therefore the information on the iPhone 4 was not backed up. Is it possible to enable iC
-
Photoshop CS3 Extended Not Responding after Installation
A couple of days ago, I purchased a copy of CS3 Extended and was ecstatic. I got home and installed it on my computer, only to find that when I opened the program, it would just not respond, so I was left with a white window. I was afraid it might be
-
Authorizations for RFC connections
Hi everyone.... what are the Authorizations required for the user when creating RFC connections in XI. Rewards, Varun Reddy.K
-
"Linked Frameworks" vs. "Other Frameworks" in Xcode 3.0
Don't know if the version matters, but in XCode v3.0- Does anybody know what the difference between "Linked" and "Other" Frameworks are in XCode's grouping pane?
-
Upgrading from Panther to Tiger. Is it worth it?
Hi there. I have been debating this in my head for quite some time. It is worth upgrading from Panther to Tiger? What are the benefits? Thanks, dave