Installation was successfully but cant start the portal

Hi
I download the SAP Portal 7 trial version and installed it in typical option on Win XP. During the install it was asked to put the master password. The installation was successfully finished. Trying to start the server from the administration console it was asked to authenticate (put the username and password.) After typing of the credential data I get in a message box: "invalid credential, start failed: 2" and the start of the server fail. I retyped and even reinstall the Portal two times to be sure that I do not make a mistake but each time I get the same error!
I installed it later again and choosed custom installation option and step by step, put all necessary passwords and installation was successfully. But the result was the same and I get the error again!
Please help to to get the portal a start

Hm..ok Shadmehr,
Last try below I head for bedtime and need to getup early for fishing tomorrow
Checkout the below resolved thread (talks about master password=SDM password).
problem with sneak preview edition
Hope that can help you get started !! Award points for helpful suggestions and nic weekend.
Ray
Edited by: Raymond HENG on Oct 11, 2008 12:12 AM

Similar Messages

I downloaded the Newest version of Adobe Air. It said the Installation was Successful but it wasn't

I downloaded the Newest version of Adobe Air. It said the Installation was Successful but everytime I try to open up a file with it, it tells me to run Adobe air again as if Im trying to download it again. Please Help!

Hi,
I am on annual leave and will be back on Nov 8th 2011.In case of any urgent ,please get in touch with your respective IT person and details given below.
For GT/MT :Mr.Manish (09004356284)& Akshay (09987712384)
For BA :Mr.Vasantha Kumar (09987631333)
For Foods/ICD :Mr.Vishal (09987937513)
Any other query please get in touch with Mr.Vijay varshney (9987631300).
Thanks
Surendran

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I have Mac OS X, using boot camp i installed windows 7. installation was successful but when i try to select to boot back to mac os x via boot camp from Windows 7 control panel, its saying "You may not have privileges to change the startup disk..."

from the boot camp control panel, highlighted "Macintosh HD Mac OS X", click on Restart button or click OK or click Apply buttons gave me "An error occurred while trying to change the startup disk. You may not have privileges to change the startup disk. Make sure you have administrative privileges and try again."
Im logged in to Windows 7 as admin thou but still giving me the above message.
i rebooted & the option key does not give me option to boot to Mac instead gives me a screen with lock then below is a blank field then a right arrow on the right side, i normally hit the power button from this screen
please help
thx

sorry for digging up an old thread, but what was the problem?

I have a 2008 iMac 21.5" 10.6.8 Snow Leopard with 4.1.3 VMWare and windows 7.Mountain Lion initially refused to down load as I had back up on the HD. this was removed and installation was accepted but froze in the initial stages with 33 mins to go.

I have a 2008 iMac 21.5" using 10.6.8 Snow Leopard with VM Ware 4.1.3 supporting Windows 7. Initially ML OSX refused to install due to Back up on HD which I removed to trash.It then proceeded but froze up in the initial stages with 33 mins remaining. I was lucky enough to quit and restart using 10.6.8. With all the problems on this chat line, it appears it may be best to leave Mountain Lion well alone, and cut losses rather than tempt fate.Has anybody anything positive to say or help with?

Welcome to Apple Communities
1. Open Disk Utility and repair permissions
2. Open Finder, go to your user's folder > Library > Caches and delete everything
3. Verify disk
4. See if your apps are compatible with OS X 10.8 > http://www.roaringapps.com
You can also do a backup and create a DVD or USB drive to install OS X > http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/ When you start in 10.8 installer, open Disk Utility, select your volume and erase the drive, and install

After installation trying to start the portal but get credential error

Hi
I download the SAP Portal 7 and installed it as typical installation on Win XP. During the install it was asked from the wizard to put the master password. I did it and the installation was successfully finisched. Trying to start the server from the administration console i was asked to authenticate and put the username and password. After typing of the credential data i get in a message box: "invalied credential, start faild: 2" and the start of the server fail. I retyped and even reinstall the Portal 2 times to be sure that i do not make a mistake by typing the master password but each time i get the same error!!!!!
I installed it later again as custom installation and step by step put all neccessary passwords and the result was the same
Please help to resolve this problem and get the portal a start
Thank you for your help

Hi
Once you power on your unit keep tapping the F10 key go to Diagnostics menu Run the Hard drive & Memory test in case any test fails you need to replace the part. If both the test passes please let me know.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itsel

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itself but, no success in starting. How do I launch the new version?

Thank you, toinimj59. I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
Solution 1: Sign out from Creative Cloud desktop app and sign back in
Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
Launch Lightroom.

I operate an Amway Business and use the switch share duplicate APP. Initial log in was successful but now it reads " Log in failed ( GW900751 ). This is constant upon log in attempts. Is there a way to rectify this?

I operate an Amway Business and use the switch share duplicate APP. Initial log in was successful but now it reads " Log in failed ( GW900751 ). This is constant upon log in attempts. Is there a way to rectify this?

Hi Tracy,
I don't suspect Malware yet, Id guess Disk corruption or failing Hard Drive with Files not found.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

I received a pop-up advising me that update OSX 10.8.3 was available. I started the download, but it was fouled by something; it did not download/install. Now I ask for software updates and they tell me "no software updates available." Help.

I received a pop-up telling me that OSX 10.8.3 was available. I started the download/ installation, but something interrupted the process and it was not downloaded and/or installed. Now when I ask for software updates, I det the message that "no updates available." What do I do to get thei update?

If the installation didn't finish, maybe OS X 10.8.3 was installed partially, and it doesn't show up because the updater already updated the OS X version to 10.8.3, although it doesn't mean that everything was installed and updated. Just to make sure that everything is updated to the version included in 10.8.3, reinstall it with the Combo installer > http://support.apple.com/kb/DL1640

I've installed Photoshop Elements 12 on my PC computer. Although the installation message at the end noted the installation was successful, when I tried to double-click on the desktop icon, it won't open. Any ideas?

I've just installed Photoshop Elements 12 on my PC computer. At the end of the installation, I received a message that the installation was successful. I then tried to click on the desktop icon, but it won't open. Any ideas as to what could be going on? Thanks very much!

This worked for me
Sandeep Singh (Official Rep) replied to this problem:
Elements 12: Editor will not Open
Hi Kimberly,
Please follow these steps:
Try to rename SLCacje to Slcache.old
C:\Program Files (x86)\Common Files\Adobe
and
SLStore to Slstore.old
C:\ProgramData\Adobe\SLStore
and Right Click on the Photoshop Elements 12 icon and run as administrator
Let me know if this works.
Thanks
Sandeep

After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message. I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot. Any suggestions? Thanks

After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message. I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run. Any suggestions? Thanks

Hey colorado65,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
All the best,
Delgadoh

I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?

I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

Installation was successfully but cant start the portal

Similar Messages

Maybe you are looking for