Installation windows 8.1 has failed

hey !
i have download windows 8.1 and i want to install it but i have a problem with installation it always stoped in 68 %
and show me a message '' installation windows 8.1 has failed  "
and  my computer support NX.PAE.SSE.SSE2.SSE3
LOOK THE IMAGE
https://imagizer.imageshack.us/v2/673x966q90/4/gam9.jpg
and this is the probleem
https://imagizer.imageshack.us/v2/735x496q90/42/eoz5.jpg
can i solve that :!? and what is the probleme ?

Hi，
Sorry for my late reply.
I downloaded the log.I found there was no error information in it.
So,please upload the following logs here for further research.
The following log files are created when an upgrade fails, and the installation rollback is initiated:
C:\$Windows.~BT\Sources\Rollback\setupact.log
C:\$Windows.~BT\Sources\Rollback\setupact.err
Thanks for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

  • OBIEE 10g Installation error "The application has failed to start because its side-by-side configuration is incorrect"

    Hi,
    I did installation of OBIEE10g on windows server 2008r2 which is placed on VM ware, Installation completed successfully. but while starting the BI services or opening the administration tool it is showing error as below
    "The application has failed to start because its side-by-side configuration is incorrect.Please see application event log or use the command line sxtrace.exe tool for more detail."
    Please guide me any suggestions.
    Thanks in advance
    Regards,
    Satya

    check these Error: The application has failed to start because the side by - Microsoft Community https://forums.oracle.com/message/10578756
    https://forums.oracle.com/thread/958782
    Resolving Side-by-Side Configuration Issues - OJ's perspective

  • Snow Leopard installation on Mac Mini has failed

    Hi,
    Does anyone know whether Snow Leopard checks what hard disk is installed in order to satisfy installation requirements as I've fitted an SSD Hard Disk Drive in my Macintel Mac Mini and installing Snow Leopard has failed (no longer boots into any Operating System previous nor upgraded. (Mac OS X 10.5.8 previously installed)).
    Thank you for any advice.
    Best Regards.

    It may not have anything to do with a new drive installation. Snow Leopard has just "bricked" my Intel Mac Mini hard drive - the original one. The first attempt at installation failed, so I tried an erase and instal. It seemed to work - briefly but when I tried to restore apps and settings from a Time Machine back-up it "hung" with only one minute of restoration to go. Now the HD appears to have failed, since it is unable to find any system folder and booting up via the Snow Leopard disc and bringing up the disc utility shows a greyed-out HD drive.
    Some people on the MacBook Pro forum report a similar problem with the hard drive after Snow Leopard installation.

  • Is it possible to get a new snow leopard installation disc if original has failed

    We bought an MBP three years ago. We never took the installation discs out of the packaging. We just did and they have purple stains around the edge and don't work.
    Obviously the mac is out of warranty, but it seemed worth asking as I have never known a DVD to acquire "disc rot" before.

    Commercial disks, which Apple uses, are pressed and cannot degrade like that. If this was a brand new Mac, then either someone switched out the disks, or they were stained in some other manner. If you bought it used, then it's likely you were given copies. If they are original disks, they should be gray with white silk screened lettering. Anything else is a copy.
    If you want machine specific replacements, which would include the bundled iLife software and other titles that are not on the retail disks, contact Apple. They will ask for the Mac's serial number to make sure you get the correct disks.

  • "Windows 8.1 installation has failed"

    Downloaded the Enterprise iso of 8.1 from the Volume Licensing site.  Currently running Windows 8 64 bit Enterprise.  Downloaded 8.1 64 bit
    enterprise.  Mounted iso, ran setup, after licensing agreement and choosing data migration options received the error "Windows 8.1 installation has failed" .  Googled around, and didn't see this exact problem.  There is no error code,
    nothing in the logs, nothing at all.  Just the message "Windows 8.1 installation has failed".  Tried several downloads of the iso, on multiple Windows 8 boxes.  
    Could a group policy setting, or something else related to these machines being on a domain be causing our issues?  If not, the lack of error codes is making the issue next to impossible to debug.  
    Anyone out there able to help?
    Thanks
    p.s.  already verified that update kb2871389 was installed.

    Hi,
    Which log did you checked, could you find the setup.etl file in %WINDIR%\Panther?
    It should have $windows.~bt\Sources\Panther log file. please check it.
    You can refer to the link below for more details about Windows 8 installation log.
    Windows Setup Log Files and Event Logs:http://technet.microsoft.com/en-us/library/hh824819.aspx
    If problem persists, I would like to suggest you to make a clean install on other drive for test, to make sure this problem was not caused by hardware problem.
    Note: before Windows installation, please backup all files on the drive which Windows 8.1 would be installed. Also make sure the hardware driver such as BIOS, Motherboard was upgrade to be latest.
    Roger Lu
    TechNet Community Support

  • Windows 10 technical preview installation has failed

    Hi,
    I currently use Windows 10 build 9860 on my computer and in another partition of my hard drive I have windows 8.1
    Today I was trying to update my build trough the update and recovery>preview builds, but I was getting this error message: "Failed to install the new build, please try again later. 0x8024200D"
    After that, I tried to download the offline .iso of the new build and running the setup, every was looking fine but when the installation got to 25% it came back to my desktop and a message appeared: "windows 10 technical preview installation has failed"
    Any way that I can solve this?
    Thanks

    Hi, 
    I tried a bunch of different steps:
    - Do a clean boot
    - Use command WSReset.exe on run box
    - Command prompt:dism.exe /online /cleanup-image scanhealth and restorehealth(When i use restorehealth gives me this error:0x800f081f) 
    - Create a new admin user and try to install update
    - rename softwaredistribution
    - Command prompt: powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.XML
    None of this worked so far for me.
    I went to C:\$Windows.~BT\Sources\Panther\setuperr.log and got this:
    2015-04-03 01:56:15, Error                 DU     DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x0000007f]
    2015-04-03 01:56:19, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x0000007f]
    2015-04-03 01:57:05, Error                 DU     DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x0000007f]
    2015-04-03 01:57:24, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
    2015-04-03 01:57:24, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
    2015-04-03 01:57:24, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
    2015-04-03 01:57:24, Error                 MOUPG  DUImage: Failed to execute DUImage FOD search and download [0x80070057][gle=0x00000012]
    2015-04-03 01:57:29, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
    2015-04-03 01:58:43, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
    2015-04-03 01:58:43, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
    2015-04-03 01:58:43, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
    2015-04-03 01:58:43, Error                 MOUPG  DUImage: Failed to execute DUImage LangPack search and download [0x80070057][gle=0x00000012]
    2015-04-03 01:58:44, Error                 CONX   Failed to get class data from printer 80070057
    2015-04-03 01:59:13, Error                 CONX   Unable to get message handle 80092009 c:\windows\system32\drivers\pltgc.sys
    2015-04-03 01:59:14, Error                 CONX   Unable to get message handle 80092009 c:\windows\system32\drivers\tapoas.sys
    2015-04-03 01:59:36, Error                        ConX::Compatibility::CActionT<5,struct ConX::Compatibility::NoParameters>::Invoke: Successfully persist data.
    2015-04-03 02:02:47, Error                 SP     CSetSafeOSBootCommand::DoExecute: Failed to set the boot app $WINDOWS.~BT\Sources\SetupPlatform.exe. hr = 0x80070003[gle=0x00000003]
    2015-04-03 02:02:47, Error                 SP     Operation failed: Set safe OS boot command. Error: 0x80070003[gle=0x000000b7]
    2015-04-03 02:02:47, Error                 MOUPG  MoSetupPlatform: ExecuteCurrentOperations reported failure!
    2015-04-03 02:02:47, Error                 MOUPG  MoSetupPlatform: Using action error code: [0x80070003]
    2015-04-03 02:02:47, Error                 MOUPG  CDlpActionImageDeploy::ExecuteRoutine(322): Result = 0x80070003
    2015-04-03 02:02:48, Error                 MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result =
    0x80070003
    2015-04-03 02:02:48, Error                 MOUPG  CDlpTask::ExecuteAction(3218): Result = 0x80070003
    2015-04-03 02:02:48, Error                 MOUPG  CDlpTask::ExecuteActions(3372): Result = 0x80070003
    2015-04-03 02:02:48, Error                 MOUPG  CDlpTask::Execute(1630): Result = 0x80070003
    2015-04-03 02:02:51, Error                 MOUPG  CSetupManager::ExecuteTask(1710): Result = 0x80070003
    2015-04-03 02:02:51, Error                 MOUPG  CSetupManager::ExecuteTask(1673): Result = 0x80070003
    2015-04-03 02:02:51, Error                 MOUPG  CSetupManager::ExecuteInstallMode(695): Result = 0x80070003
    2015-04-03 02:02:51, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(353): Result = 0x80070003
    2015-04-03 02:05:32, Error                 MOUPG  CSetupManager::Execute(204): Result = 0x80070003
    2015-04-03 02:05:32, Error                 MOUPG  CSetupHost::Execute(387): Result = 0x80070003
    I have no clue what to do next, now my windows build is saying that will expire 04/15.
    Any ideas?
    Thanks

  • HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

    iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

    Hey petanque1,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Windows has failed to load

    My laptop turns on to a black screen telling me it has failed to load due to a possible hardware or software change. What can I do to resolve this issue? Thanks

    Hello @jessica321 ,
    Welcome to the HP Forums!
    I understand Windows fails to load on your notebook and shows a black screen indicating a recent hardware or software change could be the culprit.
    If you haven't made any hardware changes I would suggest performing a system restore to before the issue started. This will remove any recent Windows updates, software updates, or software installs that could be the source of the issue.
    If that fails I would suggest reseating the HDD and RAM. You can see how to do this for your notebook in the Maintenance and Service guide which can be found on your products support page here: HP - Drivers & Downloads.
     If reseating the connections does not help check the BIOS for hardware failures by following this guide: Testing for Hardware Failures (Windows 7, Vista) or Testing for Hardware Failures (Windows 8). This will tell you if your HDD or RAM has failed which are the most common hardware failures.
    Let me know if any of that helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Silent installation of Cloud agent 12c failed on a windows 2003 host

    Hello All,
    I've done multiple installations by silently installing the cloud agent 12c using a response file. However, the configuration portion failed on this one windows 2003 host.
    Has anyone seen this? I've searched on metalink and see other problems like TZ, service already exists, incorrect PERL settings etc..but found nothing that helps so far.
    In log file:
    The action configuration is performing
    The plug-in Agent Configuration Assistant is running
    AgentConfiguration:agent configuration has been started
    Validating OMS_HOST and EM_UPLOAD_PORT
    Performing free port detection..
    AgentConfiguration: Executing emctl deploy agent command...
    AgentConfiguration:agent configuration finished with status = false
    The plug-in Agent Configuration Assistant has failed its perform method
    The action configuration has failed its perform method
    In Agent Deploy log file:
    value passed to dir splitC:/oracle/em/agent_inst
    INFO: length of temp is2
    INFO: Return value:C:
    \/oracle/em/agent_inst
    INFO: ** Agent Port Check completed successfully.**
    INFO: ERROR: The
    Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh
    monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent
    software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in,
    if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-
    in, view the plug-in deployment log C:\oracle\em\agent_inst\install\logs to check if the plug-in
    configuration for the oracle.sysman.oh monitoring plug-in failed.
    INFO:
    INFO: perform - mode
    finished for action: configure
    INFO:
    INFO: You can see the log file: C:\oracle\em\core
    \12.1.0.3.0\cfgtoollogs\oui\configActions2013-12-23_11-07-08-AM.log
    INFO:
    INFO: C:\oracle\em>exit
    /b 3
    INFO: Plugin homes:
    INFO: Plugin homes:
    INFO: C:\oracle\em\core\12.1.0.3.0\oui\bin
    \runConfig.bat ORACLE_HOME=C:\oracle\em\core\12.1.0.3.0 RESPONSE_FILE=C:\oracle\em\core
    \12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML=
    {oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
    SEVERE: ERROR: Agent
    Configuration Failed
    SEVERE: ERROR: Agent Deployment Failed

    Thanks for the reply Rahul.
    I've used that same response file for deployments on other servers without any problem.
    See response file below: (note i've changed the server name)
    ## copyright (c) 1999, 2012 Oracle. All rights reserved.          ##
    ## Specify values for the variables listed below to customize     ##
    ## your installation.                                             ##
    ## Each variable is associated with a comment. The comment        ##
    ## identifies the variable type.                                  ##
    ## Please specify the values in the following format:             ##
    ##         Type         Example                                   ##
    ##         String       "Sample Value"                            ##
    ##         Boolean      True or False                             ##
    ##         Number       1000                                      ##
    ##         StringList   {"String value 1","String Value 2"}       ##
    ## The values that are given as <Value Required> need to be       ##
    ## specified for a silent installation to be successful.          ##
    ## This response file is generated by Oracle Software             ##
    ## Packager.                                                      ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #OMS_HOST:<String> OMS host info required to connect to OMS
    #EM_UPLOAD_PORT:<String> OMS port info required to connect to OMS
    #AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
    #     establish a secure connection to the OMS.
    #AGENT_INSTANCE_HOME:<String> Agent instance home is the location of agent state directory.
    #AGENT_PORT:<String> Agent port on which the agent process should be started.
    #b_startAgent:<boolean> Agent will not be started after configuration if the value specified is false.
    #ORACLE_HOSTNAME:<String> Fully qualified domain name of host where is the agent is deployed.
    #s_agentHomeName:<String>Customized Oracle home name for the agent home. Example: s_agentHomeName="agent12gR1"
    OMS_HOST="omshost.company.com"
    EM_UPLOAD_PORT="1159"
    AGENT_REGISTRATION_PASSWORD="complicatedpassword"
    AGENT_INSTANCE_HOME="e:/oracle/em/agent_inst"
    AGENT_PORT="3872"
    b_startAgent=true
    ORACLE_HOSTNAME="targetserver.company.com"
    #s_agentHomeName=<Value Unspecified>
    #s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
    #      used to overrite the agent service name calculated by the install. This is
    #      required for only Windows.
    #      Example:
    #      s_agentSrvcName = "GridAgent"            ;  User specified value
    #s_agentSrvcName=""
    #Please Don't change the values of these variables
    #EM_INSTALL_TYPE:<STRING> install type
    EM_INSTALL_TYPE="AGENT"

  • Every time I attempt to install adobe photoshop cs6, it says installer has failed to initialize HELP

    Every time I attempt to install adobe photoshop cs6, it says installer has failed to initialize, what do I do?

    Hi supercein,
    Please try re- downloading the package and reinstall and check.
    You can also try downloading from the direct download links available at : http://prodesigntools.com/adobe-cs6-direct-download-links.html
    But make sure you follow the important steps mentioned on the page before initiating the download.
    In case you still face issues you can follow the steps below :
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing and check.

  • Equium A300D-16C - Windows has failed to start

    I have a Toshiba Equium A300D-16C and all of a sudden it starts up and goes onto windows boot manager and says that Windows has failed to start and it wont let me do anything else.
    I really dont know what to do and all my uni work is on it.
    It says to put the windows installation disk but its not responding to any disks what so ever.
    If anyone could help Id be grateful
    Thanks

    hi Lashay
    guessing you have xp on this unit try to reinstall bootfiles.
    seems that windows has lost some files...
    this could be software or a hardware issue...
    "fixboot " and "fixmbr" on recovery console should do this job.
    safest way is to get a new hdd and a hdd-usb-adapter!
    install operating system on the new hdd,
    then connect the old hdd using the usb-adapter to the new system and transfer all user files.
    not the system files or maybe you will get the same trouble again!
    if there is a serious problem on the hdd its getting worse with every attemp to read the disk...

  • Installation issues - Connection to the specified server has failed

    Hi
    i am trying to install sap server on windows 2008.my SQL server is on another box with windows 2003 and SQL 2008
    select server type drop down is blank and after entering SQL server name/user/password i am agettig this error
    "Connection to the specified server has failed"
    to make sure i have access to sql server ,i hav installed SQL 2008 native client and created one test odbc DSN to test that my serevr is talking to database server
    databse and both 2003 and 2008 machines are 64 bit
    Please help

    yes
    one thing i am noticing when i run install is i am getting this message on first screen
    so is the setup i ma running really compatible with SQL 2008?
    i am runing the setup from Patch0 because other patch downlads do not have ther server setup
    The installer detected an outdated version of MSSQL installed on this machine.
    If you are using another type of database to run SAP Business One, such as DB2 or MaxDB, press Skip.
    To upgrade your MSSQL version exit this installation. Only an experienced system administrator or DBA should upgrade the database.

  • Every time I start Firefox in an unpriveleged login I get an error box saying that an update installation has failed, even when it's up to date.

    Firefox 19.0.2; on Windows XP Pro Service Pack 3 build 2600.xpxp_sp3_gdr_130105-0416.
    I normally work using minimal privileges - so the user from which I mostly run Firefox doesn't have sufficient privilege to install a Firefox update. Now and again I log in as a privileged user, start firefox, and grab the latest version. However it happens quite frequently that Firefox goes into a mode where on Firefox startup I get an error window saying that it failed to install the update. When that window is dismissed, Firefox starts up and of course it's the latest version. Nothing I have tried appears to have any effect on this, but always after some period of time - in which I will have logged in and out a few times and probably started and stopped Firefox dozens of times - for no reason that I can discern it stops producing this error message and begins to start up without the error. This lasts a few days, and then it reverts to getting the error message.
    In case it's useful to anyone, the error window is labelled
    Dh'fhàillig ùrachadh a' bhathar-bhuig
    which translates roughly to "The software's update failed"
    and the text in the window is
    Cha do ghabh an t-ùrachadh a stàladh. Dèan cinnteach nach eil lethbhreac eile de Firefox a' dol air a' choimpiutair agad is ath-thòisich Firefox an uairsin is feuch ris a-rithist.
    which is roughly "The update couldn't be installed. Make certain no other copy of Firefox is running on your computer and then restart Firefox and try again".
    I have of course done what the window tells me; it has no effect (if it had that would mean the OS security was broken) which is a good thing but suggests that the message in the window is a bad thing. I also tried updateing from the Firefox help menu (and was relieved to see that didn't work). Using a priileged user to install the update gives the unprivileged user the latest version, but doesn't ,ake the startup message go away.
    I have a suspicion that what is happening is that Firefox running in unprivileged mode finds a security update, downloads it, and fails to install it, instead of recognising that it's running in unprivileged mode and just warning the user than an update is available; once it has done that the update remains downloaded in the unprivileged user's space, and even when the update is installed by the privileged user so that all users now have the updated version Firefox tries to install it despite its being already installed whenever the unprivileged user starts it up. If so, that would be a rather unpleasant problem, since it would tend to encourage people always to login with sysadmin privileges.

    hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

  • Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

    Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
    "This application has failed to start because CoreFoundation.dll was not found.  Re-installing the application may fix this problem.
    I uninstalled and re-installed itunes and the message still appears.
    How do I fix this??
    Thank you

    With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

  • HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

    I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

    Click here and follow the instructions.
    (98724)

Maybe you are looking for