Installation with an Elsa GLoria II VGA-card

Hi,
I use my system for professional purposes (mainly CAD) and just wanted to test the Solaris environment.
While installing Solaris (if setup is switching to X-mode) I get an blank screen and the installer asks for the type of my VGA-adapter which is not listet in the options.
What can I do, I am just an bloody unix-newby?
Marcy

Yes, you can use this VGA card as this mobo supports both 4x and 8x AGP VGA Cards. Please make sure that your card is running in 4x mode when used.
All the Best... :D!!!

Similar Messages

  • Ultra 60 with a Hercules VGA Card wont show me anything

    Hi there,
    i just have a Ultra 60 on my desk, and unfortunately I am not getting anything on my screen. Is there anything special I should look after to get the U60 with the Hercules PCI Card to work? The Model of the hercules VGA Card is: Terminator 3D/DX with a S3 Virge/DX <- if that is of any help.
    Thanks
    niels

    Hello Niels,
    Is there anything special I should look after to get the U60 .... to work?
    The Hercules PCI card (and any other PC graphics board) won't work with a SPARC system. You have to use a card with OpenFirmware not a VGA BIOS. Please review the Sun System Handbook page of the Ultra 60 for supported cards.
    http://sunsolve.sun.com/handbook_pub/Systems/U60/U60.html
    http://sunsolve.sun.com/handbook_pub/Systems/U60/components.html#Graphics
    I assume you got the Hercules card for free.The required Sun graphics boards are very inexpensive today (from second hand, e.g. eBay).
    Even with a Sun graphics card (frame buffer) but without a Sun keyboard the output is directed to the serial console.
    There is a german language Sun home user site http://www.sonnenblen.de
    Michael

  • Require Sun AMD Server with VGA card = 16M  - HELP

    Hi everybody,
    Right now, Sun has the AMD Servers: V40z, X4100, X4200.
    These products are very good with high performance and quite cheap.
    But I find out that the integrated VGA of all AMD Servers has only 8MB.
    For my job, I need graphic card with at least 16MB.
    Can I buy a VGA card with 16M/32M from Sun?
    Tks a lot,

    Joe's information is pointing to the correct direction.
    1280x1024 at 32bit color depth needs less than 8MB of video RAM.
    (... actually, less than 6MB)
    Glance at this page at the P.C. Guide web site.
    http://pcguide.com/ref/video/modesBuffer-c.html
    The PCGUIDE.COM web site has been around since 1997 and I often find its information of value.
    That video memory requirement link is a part of that web site's topic list.
    http://pcguide.com/topic.html
    I've saved the topic list as a bookmark, then use it to find
    whatever sub-topic might be of interest-du-jour.
    However, all those systems are servers, not desktop workstations.
    You shouldn't need any remarkable graphics capabilities to administer them.
    That's why there are no qualified graphics upgrade options.

  • Problem with VGA card

    Hi,
    I just bought an MSI 865 Neo2FISR MOBO and a Asus 9600 XT VGA card.
    As someone said to me on this forum, i install first the intel INF files (april 2003 version)from the MSI CD. The screen was OK (only try with XP not with Games).
    Next I install the Asus drivers and reboot the system. Since I've done that, my screen is complety black and i only can have XP in a special mode ("sans echec") in french.
    2 days ago i instal first the Asus drivers, Direct X 9 and next the Intel INF and the result was the same.
    Can someone Help Me ?
    Thanks!
    Configuration :
    P 4 2.8 Gh HT
    MSI 865 Pe neo 2FISR
    Seagate 7200.7 120 Go
    2*256 DDR 3200 Twin X LL Corsaire
    Asus 9600 XT
    XP Pro
    Sony DVD Player
    Pionneer DVD R 106 Burner
    Screen : Hercule 920 Pro DVI

    Try with ATI reference driver instead.

  • Installed New VGA Card and Lost Audio

    (Please forgive my ignorance or stupidity when it comes to any computer knowledge.  In 'Layman's Terms', I am what you would call an idiot when it comes to computers, sorry...)
    I just installed MSI VGA Card 'MD512D3', 512MB, DDR3 onto my HP Pavillion a1710n desktop computer that is running Windows 7 and after the installation, the first thing that I noticed was the fact that all of my computer's audio had disappeared.  I have been trying to trouble shoot the problem through various forums and I have tried pretty much every single solution that had been given to others with the same sort of problem.  But then it occurred to me, why don't I uninstall the new VGA card and run the computer without it like I had been doing before.  so I did the uninstallation and immediately, the audio drivers appeared in my Windows update and so now I have audio again on my computer.  But my question is this, the audio that I was using prior(and here is one of the times that you will need to forgive my ignorance), I believe they were analog.  The best way that I could describe them is that they had the connections to the computer that were color coordinated, i.e. "green" "pink" "blue", etc and I was primarily just using the "green" connection for basic stereo sound(nothing fancy).  I just happened to look at the box for the new VGA card and it specifies that it has HDMI Output which, if I am not mistaken, is a digital output that requires a completely different connection.  Can someone explain to me(in the most BASIC of terms), if this is, in fact, a digital output that requires a different set of speakers for audio or if I am able to use the 'analog' speakers that I currently have?  Now, keep in mind that I would LOVE to just go out and purchase the most expensive and up to date audio products but I am limited by my income...thanks in advance for any information that you are able to provide me...Dan

    The card supports Audio via HDMI. If you connect it via HDMI to a screen with speakers or speakers connected to the screen which is connected via HMDI the Nvidia HD audio is used. If Scrren has no speakers Nvidia HD audio can't be used. It should then use the soundcard or onboard sound of your board which the spreakers are connected to.

  • CPU initialization hang on bootup- works w/o VGA card!?

    After moving my system across country I have encountered a problem.  When I boot up my K7N2-L with 2200 and MSI GF4 4200, the system hangs on "processor initialization," as indicated by the D-bracket LED display.  Removing *just the VGA card remedies this problem and the system moves to boot up properly.  
    What could be the cause of this problem?  The only way I can see the VGA card affecting the CPU is by insufficient power or a short in the system.  Would this be a mobo problem, a CPU problem, a PSU problem or a VGA problem?  the system had worked fine months before I moved it.  
    Any help is appreciated.
    Nathan

    Quote
    Originally posted by NovJoe
    Low PSU power possible to affect this... Over-heating of card and CPU could also be the cause... BIOS settings could be another cause too... Trying looking into these areas as there's alot of possibilites on a general problem like this.
    All the Best...  :D !!!
    I have reseated my processor- overheating is not the cause.  It has worked fine before.  I have cleared the CMOS, so BIOS settings are not the cause.  It is not low PSU power either (unless something is wrong with my PSU).  This system has been running fine for months until I moved it.  Thanks for your suggestions though...

  • S3 trio 3D/2X VGA card configuration

    Dear,
    I have installed Solaris 8 for Intel on my PIII system. It has an S3 Trio 3D/2X 4MB VGA card installed in it. There is no such VGA card option given in the list while I run kdmconfig. My Monitor is Compaq V500, Which VGA I should choose from the list and which resolution level I should set inorder to get true graphics while solaris is running with Xserver. Right now, I am using standard VGA from the list. xserver runs but the graphics are very poor and dull.
    Kindly advice.
    regards,
    Imran

    Well unless it's in Sun's HAL compatibility list you are out of luck. Try applying Sun's latest Intel patches for it. Otherwise you may want to try www.xig.com and see if they have a video driver for you.

  • I bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom

    i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also

        Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
    1) Ensure the device is powered off.
    2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
    3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
    4) When the restore screen appears (exclamation mark), release the Volume Down button.
    5) From the restore screen, press then release the following keys to initiate the reset process:
    1. Volume Up button
    2. Volume Down button
    3. Power button
    4. Volume Down button
    *Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
    If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
    -KristieQ_VZW
    Follow us on Twitter @VZW Support

  • USB/Serial Drivers and App Builder Installer Questions...are drivers included in the Installer with the LV runtime engine?

    Hello all,
    I'm wondering if someone can help me out with how drivers and all are treated with applications distributed with App Builder, used to create a stand alone, full install of app and labview engine with Installer.
    What has happened  is, my application was created using the NI branded USB to RS232...and USB to RS485, and they work great.
    On the application when running..you fire it up, it finds the USB to serial device, and I have a dropdown that finds the available COM ports to use (along with setting parity, etc).
    I've installed on different computers (without previous labview installs) with the installer. They all worked.
    The customer has received the installer....and despite us telling them to use the NI branded USB/Serial interfaces..they are trying to work with a different USB/serial cable.
    They say the COM ports aren't even showing up when they run the installed application.
    So, I'm not sure where to start. Is this a driver issue?  Does the App Builder Installer...install the drivers for the interfaces I was using with it? Is there a way for the person to find and install a driver on their own...or would I have to somehow find out a driver for what they use....then, basically redo the App Builder Installer build...to include that driver with the executable I send back out?
    I guess I basically need a better understanding of how drivers for external access/communications are handled when you use App Builder to create a stand alone application complete with the labview runtime engine...and nothing else.
    Thank you in advance,
    cayenne

    The main thing is that LV uses VISA to talk to serial port whether native on the machine or from USB dongles that you plug into the computer. It sounds to me like their dongles aren't working.
    Can the customer see the ports in the Windows Device Manager? Can they access them through something like hyperterminal? How does your program find the USB/Serial devices?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Driver for Creative graphics blaster 3D CLGD5464 pci vga card

    Can anyone tell me from where to find the driver for Creative graphics blaster 3D CLGD 5464 pci vga card. The driver in Solaris8 is for CLGD 5465 which is not compatible with my card. The solaris detects my card as CLGD 5465 but it doesent work. Can anyone tell me what should I do about it?
    thanks, Kashif ([email protected])

    If it is not supported by the Xserver under Solaris you may find you can get it to work by installing XFree86 (www.xfree86.org), there are compiled binaries for Solaris Intel that will make the transition easier (personally I found the 3.3.5 version works well). First check at www.xfree86.org if your videa-card IS supported under XFree though. There are some tweaks you need to add to get it all to work in the Solaris x86 FAQ. Since you probably have to do all of this in non-gui its not easy but can be done.

  • Problem with SoundBlaster X-Fi Xtreme Audio Card Installat

    I just completed installation of my X-Fi Xtreme Audio card for PCI express slot. I followed instructions and cancelled the prompt for audio drivers (by the hardware wizard) and installed via the Creative Labs CD. The installation went well and the card appears to be
    functioning normally. My problem is that whenever I boot up the computer, the hardware wizard keeps discovering my card as new hardware and prompting me for a driver. I have been cancelling each time, but the last time I put in the CD, and had it search for the driver in the Audio/Drivers/driver/WinXP/bin, but it didn't seem to be able to locate the driver to satisfy itself.
    What should I do (besides turning off the hardware wizard) to end this cycle of "new hardware found" episodes every time I boot.
    I hope that someone can help with this.
    ps: I would have liked to speak briefly with a Creative Tech Support person, but they seem to have conveniently left any telephone contact numbers off of their website, so I must depend on your help. Thanks.

    Hi,
    Please check the "Support" folder on your installation CD for Customer Support contact details.

  • Motion on G4-best VGA card ??

    I use a MacBook Pro for editing native HDV and my Dual 867 G4 will get a processor upgrade soon to make it a Dual 1.25 running 10.4.9 and 2gigs of RAM. I know PCIe and PCIx are the new specifications for VGA cards, but what PCI card is still out there that works well with Motion ?

    There is NO PCI card that will work with Motion - AGP? Yes. Search is your friend:
    http://discussions.apple.com/search.jspa?threadID=&q=graphics+card&objID=f656&da teRange=all
    I use an ATI x800 flashed over from a PC version myself in my MDD G4.
    Patrick

  • K9N Neo V3 : PCI-E and PCI-E x1/PCI VGA cards at the same time ?

    Hello,
    I'm thinking about getting one more VGA card to resolve my dual screen issue :
    Quote
    I use two monitors. PC monitor as first screen, TV is extended for watching videos.
    PC : Philips 220aw (22", 1680x1050 @ 60Hz) DVI-DVI
    TV : LG 42lh3000 (42", 1920x1080 @ 24Hz) DVI-HDMI
    I've been trying to get smooth playback on the TV for days, but random stutter happens.
    When a video (mostly HD contents) is played on the TV while using the PC monitor, things like minimize/maximize windows, page scrolls stutter and so does the video. Idle while watching videos also stutters randomly.
    I tried almost every combinations of renderers/codecs/players, tried by desactivating aero and all the fancy graphics, but it didn't solve the problem.
    The only way i get smooth playback on the TV, is by desactivating the PC monitor. (Using nVidia panel or "Win" key+P), so only the TV is active.
    I tried with a Blu-Ray using DXVA and it was smooth.
    I haven't got a chance to test with a better graphic card yet. This issue doesnt happen on XP though.
    Here are the specs :
    K9N Neo V3
    Athlon 64 x2 @ 3Ghz
    4Go DDR2-800
    8800 GT 512Mo (driver 197.45)
    Win7 Ultimate 32 Bits.
    Corsair 450W 80+
    My question is : Can i add a PCI-E x1 or a PCI VGA card on this motherboard, so each screen will have its own VGA card ?
                          If so, both nVidia or ATI would work ?
    Thank you.

    It would be one of these, if it is allowed by the K9N Neo V3.
    http://www.club3d.nl/products/products_ending_page_7_with_id.cfm?product_id=154
    http://www.club3d.nl/products/products_ending_page_7_with_id.cfm?product_id=223
    I will try to test with an ATI card if i can find one.

  • HELP !!! 2nd VGA card not working

    I have the following board: MSI 865GM2-LS (MS-6743G) Ver0B
    I have just put into the PCI slot an S3 Virge/DX 375 VGA card and it gives me a yellow exclimation in device manager ( Win XP)
    Under "General" is the following message:
    This device cannot start (Code 20)
    Under "Resources" I get the following:
    This device isn't using any resources because it has a problem (Well No )
    I am using the standard on-board Intel VGA card.
    Could you please help me it get this working as i want to run 2 screens.
    Thanks

    Windows XP does support DUAL displays, but only with video cards with TWO outputs.  
    It's never been done before, as it's impossible. Unless you have a radeon 9xxx card and a ATI 9100 IGP chipset, which you don't have.
    Sorry for the bad news  

  • NVidia released a new driver for Qosmio nVidia VGA Cards

    Hello
    This is the latest and the official driver from nVidia, Works for all Qosmio models with nVidia VGA Card
    Vista:
    http://www.nvidia.com/object/geforce_notebook_winvista_179.48_beta.html
    XP:
    http://www.nvidia.com/object/geforce_notebook_winxp_179.48_beta.html
    Enjoy

    Hello Markus77
    Nvidia decided to release notebook drivers and add a section for that in their download page, the drivers are good for gamers who want to play games in their laptop and want the latest bug fixed drivers.
    The good about this one is that it is official from nivida and not tweaked or modified like the others.
    Regards'

Maybe you are looking for