Installation with DELL PE1400

Is there anyone here able to install the Solaris 7 Intel Edition successfully to the DELL PowerEdge 1400 machine?
I found out that DELL PE1400 is in the Solaris 7 HCL but I was unable to make it running. It always generate a boot error after the installation. eg. (i) too many active sources (ii) short read (iii) unable to locate /etc/bootrc
Help!

> Is it possible to install SAP instance with Remote Database and is there steps to be followed for SAP installation with Remote Database.
You have to specify the remote database server name when sapinst ask you about the database. This should do the trick.
Markus

Similar Messages

  • OSB with Dell PowerVault 100T DAT7 2

    Will Secure Backup work with the Dell 100T DAT72 tape drive?

    This is an area that I have very little experience. I'm not sure what a library is to be honest. Is this something that installs with the drive, or is it a piece that needs to be purchased or obtained separately? All I can tell you is that I followed the OSB instructions exactly:
    10gR2 10.2.0.2.0 Windows 2k3 R2 on Dell PowerEdge rack
    Created Library with attachment raw device //./obl0
    But the show properties revealed the message "no hardware info is available for library tc-lib - The system cannot find the file specified"

  • Oracle 10g R2 installation with ASM+RAC

    Gurus,
    Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
    We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
    ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
    The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
    1) Install CRS
    2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
    3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
    4) Create ASM database using DBCA -
    5) Use dbca to create database.

    Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
    They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
    I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
    http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

  • Multiple independent devices on Single installation with independent monthly rental charges

    Hi Experts,
    4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I believe we can do this scenario. Can anybody advise for any consequences?
    Note: number of devices can change from 2/3/4.

    Hi,
    How are you going to satisfy the meter read orders to make it billable without entering the meter reads? If you do not need any meter read, can't you use any flat rate / time dependent prices? The amount output will be same but you will not be using any settle* variant program. You may use any Lumsum* variant program. If you do not use the devices for entering meter read, do you have any requirement of installing the devices with the utility installation?
    Thanks.
    Nirmalya

  • How can i change alternative apple id to my apple id to update software that installation with alternative apple id?

    hi, my software for example games , installation with another apple id and i want to update software but i cant , how can do this change ? i should go to itunes store to do this change or i cant at all?

    you can change your apple id or password etc here http://www.apple.com/support/appleid/
    Good Luck
    Matthew

  • Error in installation with NW04S

    Hi,
    error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
    i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
    Thanks & Regards
        kiran.B

    Hi,
    Assign the Role  <b>SAP_BC_JSF_COMMUNICATION_RO</b> to the profile of SAPJSF user in production client and restart the installation.
    Regards,
    Siddhesh

  • StarTech Adapter not working with Dell Inspiron 15, model 3521

    Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
    Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521 
    I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
    I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
    It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
    I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model. 
    If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for! 
    Any thoughts?

    Hi,
    Thanks for your reply.
    This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

  • Yosemite System Crashes on Boot with Dell U2713HM

    Previously under Mavericks I had no issue with a Dell U2713HM monitor and my 'non-stock' NVidia card.  (The reason I'm using the video card I am is because the stock ATI card (ATI Radeon HD 2600 XT) is known do fry itself which I discovered after replacing it with an identical card and having the 2nd one fry itself after a year.  I did a lot of research and settle don the card I now have because others had reported success with it.  It worked fine for nearly a year until updating to Yosemite.)
    After upgrading to Yosemite my system went into an infinite reboot loop on startup.  On a hunch, I swapped out my U2713HM for an old 17" monitor and was able to boot.  I can't even have the U2713HM plugged in/turned off using the second port on the card without the system crashing.  If I get the system booted using the 17", I can then plug in/turn on the U2713HM and set the resolution - at that point I can (sometimes) boot but it will then crash on shutdown triggering an automatic restart.
    Is anyone having any success with a U2713HM, and especially with an NVidia card?  The only option I haven't tried is a completely fresh, clean install.  Once the system boots, I get the dialog that it was restarted because of an issue and can view part of the dump info that will be sent to Apple -> that clearly indicates the issue is with the kernel/NVidia driver somewhere.
    System specs:  Mac Pro (Early 2008) with an NVidia GeForce GTX 650 1024MB card installed running Yosemite (OS X 10.10)

    My mac mini (late 2012, Yosemite installed) doesn't start with Dell U2713HM if the USB cable of the monitor is connected.
    No problems if I connect the usb-cable after successful startup. Also the usb-hub of the Dell is working fine then.

  • SAP R-3 IDES 4.71 installation with Oracle9i

    Hello
    I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
    INFO 2008-05-14 22:50:30
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-05-14 22:53:59
    See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
    TRACE
    ProgramReturnCode='-1' means error.
    ERROR 2030-05-14 22:53:59
    MOS-01012  PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
    Windows 2003 Server
    AMD 2GH Dual core
    2GB Ram
    250GB HDD
    Computer name: bw2003
    Central instance: DEV
    I checked the host file system32/drivers/etc the IP adress and the host name is there.
    I am hoping  that someone could help me with the installation  thanks in advance.
    waiting .....

    ok here you go
    dev_disp
    trc file: "dev_disp", trc level: 1, release: "620"
    Sat May 18 00:27:08 2030
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        2276
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          9776     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 042F0040, size: 1974816)
    DpShMCreate: allocated sys_adm at 042F0040
    DpShMCreate: allocated wp_adm at 042F0560
    DpShMCreate: allocated tm_adm_list at 042F2B90
    DpShMCreate: allocated tm_adm at 042F2BB8
    DpShMCreate: allocated wp_ca_adm at 0448F878
    DpShMCreate: allocated appc_ca_adm at 04493EC8
    DpShMCreate: allocated comm_adm_list at 04495638
    DpShMCreate: allocated comm_adm at 04495650
    DpShMCreate: allocated ca_info at 044C4450
    DpShMCreate: allocated wall_adm at 044C4458
    MBUF state OFF
    Sat May 18 00:27:09 2030
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
    <ES> 306 blocks reserved for free list.
    ES initialized.
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c      2599]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1451]
    Sat May 18 00:27:18 2030
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    Sat May 18 00:27:32 2030
    CCMS: start to initalize 3.X shared alert area (first segment).
    Sat May 18 00:27:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    Sat May 18 00:27:50 2030
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:29:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W0 (pid 2328) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 2416) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    my types changed after wp death/restart 0xbf --> 0xaf
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:30 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W5 (pid 2368) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W6 (pid 2376) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W7 (pid 2384) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    my types changed after wp death/restart 0xaf --> 0xad
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W2 (pid 2344) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    ERROR => W8 (pid 2392) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W10 (pid 2408) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    ERROR => W12 (pid 2424) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    my types changed after wp death/restart 0xad --> 0x89
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:30:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W1 (pid 2336) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    Sat May 18 00:30:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:30:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W3 (pid 2352) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W4 (pid 2360) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W9 (pid 2400) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    Sat May 18 00:32:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:51 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:33:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:11 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:13 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:33 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:37:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:30 2030
    caught signal 2
    Sat May 18 00:40:42 2030
    ***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c   7883]
    dev_w0
    trc file: "dev_w0", trc level: 1, release: "620"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Sat May 18 00:27:19 2030
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
    B  New connection 0 created
    M  systemid   560 (PC with Windows NT)
    M  relno      6200
    M  patchlevel 0
    M  patchno    674
    M  intno      20020600
    M  pid        2328
    M 
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c   1028]
    I  MtxInit: -2 0 0
    M 
    M Sat May 18 00:27:24 2030
    M  DpShMCreate: sizeof(wp_adm)          9776     (752)
    M  DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    M  DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpShMCreate: sizeof(comm_adm)     192000     (384)
    M  DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04AF0040, size: 1974816)
    M  DpShMCreate: allocated sys_adm at 04AF0040
    M  DpShMCreate: allocated wp_adm at 04AF0560
    M  DpShMCreate: allocated tm_adm_list at 04AF2B90
    M  DpShMCreate: allocated tm_adm at 04AF2BB8
    M  DpShMCreate: allocated wp_ca_adm at 04C8F878
    M  DpShMCreate: allocated appc_ca_adm at 04C93EC8
    M  DpShMCreate: allocated comm_adm_list at 04C95638
    M  DpShMCreate: allocated comm_adm at 04C95650
    M  DpShMCreate: allocated ca_info at 04CC4450
    M  DpShMCreate: allocated wall_adm at 04CC4458
    X 
    X Sat May 18 00:27:28 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M 
    M Sat May 18 00:27:33 2030
    M  calling db_connect ...
    C  Got ORACLE_HOME=C:\oracle\ora92 from environment
    C 
    C Sat May 18 00:28:05 2030
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C 
    C Sat May 18 00:28:06 2030
    C  Logon as OPS$-user to get SAPDEV's password
    C  Connecting as /@DEV on connection 0 ...
    C  Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
    C 
    C Sat May 18 00:28:17 2030
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C 
    C Sat May 18 00:28:33 2030
    C  Now I'm connected to ORACLE
    C  Got SAPDEV's password from table SAPUSER
    C  Got SAPDEV's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C 
    C Sat May 18 00:28:34 2030
    C  Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C  Now I'm connected to ORACLE
    C  Database NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
    B 
    B Sat May 18 00:28:35 2030
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  20300518 002733 BW2003
    M 
    M Sat May 18 00:28:36 2030
    M  db_connect o.k.
    I 
    I Sat May 18 00:29:01 2030
    I  MtxInit: 0 0 0
    X 
    X Sat May 18 00:29:02 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13
    B  dbtbxbuf: Buffer TABL  (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
    B  dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 276 = 276
    B  2: 13 * 20 = 260
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 128 = 256000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 100 = 100
    B  7: 65 * 4 = 260
    B  8: 29385 * 128 = 3761280
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    I  *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
                  ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete.  [shmnt.c      2055]
    I  *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c      469]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Intel unknown
    Processor-Count           : 1
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 1
    NT Pagefile Informations
    Config. minimum size      : 589824 K
    Config. maximum size      : 1179648 K
    Avail.  maximum size      : 1179648 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    C:\pagefile.sys
    589824 K
    1179648 K
    1179648 K
    1178900 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           :        0
    Commit Charge Total       :  1670224 K
    Commit Charge Limit       :  1676596 K
    Commit Charge Peak        :  1670376 K
    Phys.Memory Total         :        0 K
    Phys.Memory Available     :        0 K
    File Cache                :        0 K
    Kernel Memory Total       :        0 K
    Kernel Memory Paged       :        0 K
    Kernel Memory Nonpaged    :        0 K
    Memory usage of current process
    Total virt.address space  :  2097024 K
    Avail.virt.address space  :  1133576 K
    Private Pages             :        0 K
    Total heap size           :    10729 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :     4108 K
    Allocated heap memory     :     4406 K
    Moveable heap memory      :       24 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    4
    72 K
    2100 K
    0 K
    0 K
    3
    352
    smss.exe
    212 K
    448 K
    144 K
    160 K
    0
    424
    winlogon.exe
    996 K
    9048 K
    6188 K
    6580 K
    3
    468
    services.exe
    1276 K
    3136 K
    1436 K
    1564 K
    0
    480
    lsass.exe
    2148 K
    6544 K
    7048 K
    7048 K
    1
    676
    svchost.exe
    552 K
    2508 K
    832 K
    832 K
    0
    848
    svchost.exe
    4840 K
    22520 K
    13348 K
    19208 K
    9
    972
    spoolsv.exe
    712 K
    4060 K
    3220 K
    3228 K
    1
    1124
    svchost.exe
    392 K
    1956 K
    476 K
    476 K
    0
    1176
    agntsrvc.exe
    948 K
    7720 K
    9128 K
    9128 K
    1
    1196
    TNSLSNR.exe
    2432 K
    5720 K
    5764 K
    5776 K
    1
    1212
    cmd.exe
    384 K
    1572 K
    1488 K
    1488 K
    0
    1228
    ORACLE.EXE
    122564 K
    135924 K
    203080 K
    205256 K
    38
    1324
    SAPSTARTSRV.EXE
    2520 K
    13364 K
    14828 K
    14828 K
    3
    1420
    VMwareService.exe
    928 K
    2164 K
    604 K
    604 K
    0
    1528
    dbsnmp.exe
    2240 K
    11312 K
    13608 K
    39264 K
    3
    1816
    Explorer.EXE
    2928 K
    15120 K
    10200 K
    10332 K
    13
    1864
    jusched.exe
    252 K
    1764 K
    432 K
    432 K
    0
    1872
    VMwareTray.exe
    724 K
    3144 K
    852 K
    888 K
    0
    1880
    VMwareUser.exe
    1376 K
    3284 K
    1032 K
    1048 K
    0
    1996
    svchost.exe
    488 K
    3740 K
    1440 K
    21664 K
    1
    216
    svchost.exe
    800 K
    3708 K
    2788 K
    2788 K
    0
    2080
    sapinst.exe
    82868 K
    105272 K
    84324 K
    105292 K
    41
    2088
    javaw.exe
    6944 K
    21272 K
    20396 K
    20896 K
    6
    2200
    startsap.exe
    460 K
    1772 K
    748 K
    748 K
    0
    2212
    sapstart.exe
    1244 K
    3176 K
    1188 K
    1188 K
    0
    2276
    disp+work.exe
    [DP] DEV_00
    26740 K
    42464 K
    30176 K
    30176 K
    10
    2312
    gwrd.EXE
    [GW] DEV_00
    1852 K
    6116 K
    3936 K
    8208 K
    1
    2320
    icman.EXE
    56440 K
    60192 K
    75880 K
    75880 K
    17
    2328
    disp+work.EXE
    [WP] DEV_00
    10700 K
    11516 K
    43684 K
    43788 K
    7
    2336
    disp+work.EXE
    [WP] DEV_00
    6696 K
    13084 K
    42180 K
    42180 K
    6
    2344
    disp+work.EXE
    [WP] DEV_00
    10896 K
    14092 K
    42180 K
    42180 K
    6
    2352
    disp+work.EXE
    [WP] DEV_00
    10088 K
    14588 K
    42176 K
    42176 K
    6
    2360
    disp+work.EXE
    [WP] DEV_00
    9320 K
    12960 K
    42184 K
    42184 K
    6
    2368
    disp+work.EXE
    [WP] DEV_00
    9480 K
    13076 K
    42184 K
    42184 K
    6
    2376
    disp+work.EXE
    [WP] DEV_00
    10060 K
    13220 K
    42180 K
    42180 K
    6
    2384
    disp+work.EXE
    [WP] DEV_00
    10024 K
    15128 K
    42184 K
    42184 K
    6
    2392
    disp+work.EXE
    [WP] DEV_00
    6576 K
    14752 K
    42180 K
    42180 K
    6
    2400
    disp+work.EXE
    [WP] DEV_00
    8812 K
    13436 K
    42184 K
    42184 K
    6
    2408
    disp+work.EXE
    [WP] DEV_00
    8552 K
    16140 K
    42180 K
    42180 K
    6
    2416
    disp+work.EXE
    25744 K
    25972 K
    41644 K
    43788 K
    10
    2424
    disp+work.EXE
    [WP] DEV_00
    6848 K
    11060 K
    42180 K
    42180 K
    6
    Sum
    460128 K
    1063904 K
    B  dbexpbuf[0]: Shm 54: create failed
    B  ***LOG BBF=> internal error in export/import buffer: object buf init fail   [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
    B  dbexpbuf: return code (sap_rc): 4
    B  Buffer 0 will not be available
    B  Unexpected returncode from db_exp_init(EXP_ATP) : 4
    B  db_objinit failed
    M  *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c  237]
    M  *** ERROR => ThIPCInit: hook failed [thxxhead.c   1656]
    M  ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1159]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   8437]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = -1
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    rfc_req = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
    M  *  ERROR       tskh_init: ThIPCInit
    M  *
    M  *  TIME        Sat May 18 00:29:02 2030
    M  *  RELEASE     620
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          17
    M  *  MODULE      thxxhead.c
    M  *  LINE        8569
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  237]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c   346]
    M  SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
    Thanks buddy
    waiting...

  • [Solved]Can't finish The Hobbit installation with virtual drive

    Is there any way that I could combine two iso files into one so that I could finish The Hobbit installation process.  I always get stuck at the point where it asks for the second disk and gnome-disk-utility won't unmount the first ISO because it's still in use by the installation process.
    I tried doing this
    $ sudo mount -t iso9660 -o loop disc1-mountpoint
    $ sudo mount -t iso9660 -o loop disc2-mountpoint
    $ sudo mkisofs -l -J -R -o dvd.iso disc1-mountpoint disc2-mountpoint
    and here's what I got
    I: -input-charset not specified, using utf-8 (detected in locale settings)
    Using BILBO000.ICO;1 for /bilbo.ico (bilbo.ico)
    Using AUTORUN000.INF;1 for /Autorun.inf (Autorun.inf)
    genisoimage: Error: '/media/dc/bilbo.ico' and '/media/live/bilbo.ico' have the same Rock Ridge name 'bilbo.ico'.
    genisoimage: Error: '/media/dc/Autorun.inf' and '/media/live/Autorun.inf' have the same Rock Ridge name 'Autorun.inf'.
    Unable to sort directory
    NOTE: multiple source directories have been specified and merged into the root
    of the filesystem. Check your program arguments. genisoimage is not tar.
    So here's what I'm currently trying right now.
    $ cat HobbitCD1.iso > The_Hobbit.iso
    $ cat HobbitCD2.iso >> The_Hobbit.iso
    Okay, so doing that didn't return any errors, now to see if I can finish the installation with the new ISO file.
    Nope it still asks for disk 2.  So the real question is how can I force the first disk to unmount so that I can replace it with the second disk?
    Last edited by lspci (2012-08-23 22:40:14)

    progandy wrote:Why don't you try this?
    Manually mount the first iso image, begin installation, forcibly unmount old iso, mount new iso, continue installation.
    Oh, you can forcibly unmount something?! 
    (read the manpage for umount)
    Oh, whaddaya know, you can. 
    from umount's manpage
    -f Force umount (in case of an unreachable NFS system). (Requires kernel 2.1.116 or later.)
    I dunno why I didn't think to check the manpage for umount.  Sorry, my bad.
    EDIT: Okay, so forcibly unmounting the iso didn't work.  I was able to force umount, but I couldn't disassociate the /dev/loop2 from the HobbitCD1.iso file.  losetup doesn't seem to support forcing.  I think that I better just install this under Windows and then copy and paste the installed files to my external hard drive and then move them onto my laptop from there.  =/ Not really what I was looking for, though.
    Last edited by lspci (2012-07-30 11:53:58)

  • Can Packagemaker create installer with content files outside the bundle?

    I'm trying to create an installer with Packagemaker, but the content files need to be outside the final bundle because they're shared with a Windows installer.
    I thought I could create a symbolic link to the external folder, but instead of linking from the installer, it copied the files into the bundle. Any idea how to do this, or if it's even possible? I need to be able to do this on 10.3+, if that's relevant.
    (I can give a more specific scenario if this isn't clear enough)
    Thanks!

    zekel wrote:
    The main issue I'd be worried about is that the external files (which are quite large) won't have the appropriate progress bar. The external files are around 1GB, while the internal files are in the 30MB range.
    How about installing a secondary installer with progress bar that copies these files from the correct location. Your postflight script can just kick off the newly installed file copier.
    How's this sound for a hack...
    Have a launcher script copy the installer to /tmp, then modify the package to point my files. (I'm installing from read-only media.) It would then open the modified installer which would pull my files from the DVD. This would probably work better (read: at all) if the files aren't compressed inside the package. Do you know if that's an option?
    No, sorry. The internals of a package are quite specific. You need PackageMaker itself to build them.
    Things like the receipts are non-essential at this point, only because if I can't get this to work then we will continue to use our terrible installer which leaves none of those things. Those shouldn't be too much trouble if I can get the rest to work.
    There are some 3rd party installers like Installer VISE. The sad part is that they tend to make the MacOS X Installer look good.
    If the guy responsible for that is interested I'll show him Inno Setup, but we have a working Windows installer, so he probably won't want to mess with it.
    I agree, but tell him about it anyway. The next time you have to build a Windows installer, he could use Inno Setup and get it done in a couple of hours and then have time to help with the mess that is software deployment on MacOS X.

  • Oracle 11gR2 RAC installation with DNS

    Dear Guru's,
    I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
    O.S: RHEL5.4(64 bit)
    Oracle Version: 11gR2(11.2.0.2)
    Note: Am creating nodes in VMware ESXi server.
    Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
    Bala :)

    Hi Bala,
    I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
    There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
    And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
    - http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
    - http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
    - http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
    Very good videos:
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
    Hope it helps,
    Best regards,
    Gena

  • It is possible to include the jre(not the installer) with the application?

    Is it possible to include the jre(not the installer) with the application, so that the application will run on its own jre.??
    If so please provide me instructions,how to do it.
    Thanks
    Isma

    See http://java.sun.com/javase/6/docs/technotes/guides/deployment/index.html

  • HT5622 how can change apple id that software installation with another apple id?

    my software installation with another apple id , i want to update software for expample games, i cant do this , what can i do to change thats apple id?

    Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
    (94041)

  • Problem with NW04s SR2 installation with MS SQL Server 2000 SP4

    I’m struggling with the NW04s installation with MS SQL Server 2000.
    The installation stops at the step “Create/modify database schema SAPJ2EDB”.
    The following error/info from log file,
    INFO       2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
    INFO       2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:58 [ianxbservi.cpp:697]
               CIaNtServices::stop(const map<iastring,iastring>&)
    The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:10 [ianxbservi.cpp:632]
               CIaNtServices::start(const map<iastring,iastring>&)
    The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:21 [ianxbservi.cpp:632]
               CIaNtServices::start(const map<iastring,iastring>&)
    The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    INFO       2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    INFO       2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    ERROR      2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
    ERROR      2007-06-06 12:03:40
               lib=iamodmssql module=CIaNtMssDmo
    MDB-05053  Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
    INFO       2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
               showDialog()
    An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
    ERROR      2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
    Please let me know if you can help or if there is any other way around.
    Many Thanks in advance.
    Ritin Jain

    Hi All,
    I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
    You have to chhose the following settings while instalation,
    Service Account - Select one of the following options:
    1) Use the built-in System account for each service and choose Local system or Network Service.
    2) Use a domain user account, and enter the user name and password.
    Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
    Authentication Mode      
    1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
    This mode is required for a Java or ABAP+Java system.
    If you choose this mode, you have to set the password for the sa login.
    Note: The password for the sa login must comply with the Windows password policy.
    Collation Settings      
    1) Select SQL collations (used for compatibility with previous versions of SQL Server).
    2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
    I hope this helps!

Maybe you are looking for