Installation with Oracle 8i database and iAS8i

Hi Everybody!!
I would like to install both oracle 8i and
iAS on standalone machine such Linux.
When I tried to that, I had a problem.
If there is anybody that already installed them on one machine successfully, Would you please tell me ?

I have them on one machine running RH7. I hope to upgrade to 8iR3 and IAS9i in the near future.
My system has both installations in separate directories with separate owners. It works fine (ie: rebooted when we have a power cut)
Steve

Similar Messages

  • Installation of oracle 9205 database and client software on same machine

    Hi,
    I have installed Oracle 9205 on my laptop running on windowsxp sp2.
    I intent to create a Database and access the same using developer forms which again would be installed on the same laptop.
    Please help me in configuring this scenario.
    how to configure the listener.ora, what about sqlnet.ora and tnsnames.ora for the server part as well as the client part
    also what services need to be configured in windows xp
    Altaf

    Altaf,
    Problem is you don't see similar output from your lsnrctl status. Try rebooting your machine and make sure you see similar output.
    How exactly are you trying to connect to your service?
    Sqlplus sys/password as sysdba
    sqlplus sys/password@INS_LIST as sysdba
    $ lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-DEC-2008 13:46:06
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date                16-DEC-2008 09:18:21
    Uptime                    0 days 4 hr. 27 min. 45 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    Listener Log File         C:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NROHILLA01.usi.corpusi.net)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
    Services Summary...
    Service "DSSXDB" has 1 instance(s).
      Instance "dss", status READY, has 1 handler(s) for this service...
    Service "DSS_XPT" has 1 instance(s).
      Instance "dss", status READY, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "dss" has 1 instance(s).
      Instance "dss", status READY, has 1 handler(s) for this service...
    The command completed successfully

  • Unable to connect Forms and Report with Oracle 9i database

    Dear All
    Please help
    I have received the following message when i connect Developer 10G Report builder with oracle 9i database.
    scott/tiger@z
    REP-0501:Unable to connect to the specified database ORA-12154:TNS could not resolve service name.
    I have written the following text in tnsnames.ora file.
    # TNSNAMES.ORA Network Configuration File: E:\ora_10g\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    z =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = zkhan-dfml)(PORT = 1521))
    (CONNECT_DATA =
    (SID = dba)
    One more thing that i need to mention,I have also installed Oracle Report 6i and its connecting well.I have installed Oracle database in my own computer.
    Regards

    [email protected] wrote:
    Thanks for the reply,Now my tnsnames.ora file is look like this.
    z =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = zkhan-dfml)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = dba)
    but still facing the same error ,one more thing that i need to mention, I have 3 Oracle home.details are:
    for Oracle database 9i
    for report builder 6i
    for Developer 10G
    Kindly advise.Yes, you definately needed to mention that. That suggests you also have 3 $ORACLE_HOME/network/admin directories, each with its own tnsnames.ora file. So you need to make sure you are hitting the correct one. I'd pick one to be the controlling one and set the TNS_ADMIN enviornment variable to point to it.

  • Download between Oracle 9i Database and Oracle 9i DS

    I have download the files for Windows 2000.
    Oracle 9i Database version 9.0.2.1
    Oracle 9i DS version 9.0.2
    Download Date: June 7, 2002
    These from what I can tell are the lates versions on the website. I installed the database and everything went in fine. I can work with the database and everything. When I use the Universal Installer for Oracle 9i DS, I get an error when it hits 31% that states that this version of DS will not work with a database that is of version 9.0.2.1 or greater.
    If anyone can help me it would be a great help,
    Greg

    Hi,
    Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
    applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
    tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
    based applns, Wireless applns etc..)
    Cheers !
    -- Rajesh
    Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

  • Forms 6i is not connecting with Oracle 11g database?

    Forms 6i is not connecting with Oracle 11g database?
    How to resolve this issue?

    Hi,
    Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
    There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
    Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
    - Pavan Kumar N

  • Oracle 9i Database and Solaris 10 Zones

    Can an existing oracle 9i database be moved into a new zone? The database resides on it's own filesystem. The server is runnign Solaris 10, and the zones are not set up yet, but Oracle is installed, and the 2 databases are up and running.
    Basically there are 2 existing oracle 9i databases, and I want to setup 2 zones, where none other than the default global exist right now, and have each database in a zone.
    Thanks in advance.

    You need to do the following -
    Configure loopback mount points from the global zone into the local zone through zonecfg (one for Oracle binary, other for Oracle data). I am assuming that you want to share the same Oracle binary location between all the zones. The Oracle database mounts must be separate & make sure that you put them in the respective zone's config only.
    Create an oracle user with dba group in both the zones. It's best if the user IDs & group IDs across all the zones & global zone match.
    Stop both the database instances in the global zone.
    zlogin to a zone, su as oracle and startup the instances.
    Hope that works!

  • I am trying to connect oracle develper suit form with oracle 10g database

    i am trying to connect oracle develper suit form with oracle 10g database
    but when i pass username and password
    this message apperars
    ORA-12560:TNS:protocol adapter error
    every time even i try to connect Report or Designer each time same problem
    making no connection .
    can any body help can help me to reslove this prblem
    Arshad khan

    Duplicate thread:
    Re: connection problem

  • Problem Connecting Developer Suite Form 9 with Oracle 9i Database

    Hi,
    I have a problem to connect Developer Suite Release 2 forms 9 with Oracle 9i database release 1. I have done net8 easy configuration but no success. The error is ORA-12514 TNS: Listener could not resolve SERVICE_NAME given in connect descriptor. I am not using any application server. Can any one help me to solve this problem.
    Thanks in Advance
    Nasir Ali Mughal

    Configure the net configuration for both 9idb and 9ids in the same way. Make sure the TNSlisner is started.

  • Oracle 6i forms issue with Oracle 9i Database

    Hi Friends,
    I am having Oracle Forms Developer installed with patchset18.The Version is 6.0.8.27.0
    When i connect the forms builder to 9i Database (9.2.0.1) the form builder is getting crashed but i am able to connect the forms builder to e-business suite database(9.2.0.6)
    I tried installing 9i Database(9.2.0.1) on windows 2003 server,windows xp,windows 2000.
    When i connect my forms builder to any of these databases the forms builder is crashing with don't send message error on (ifbld60.exe).
    Is there any compatibility issue between forms builder(6i) and oracle 9i(9.2.0.1).Please suggest me.
    Regards,
    Arun .N

    Forms 6i connects to Oracle 9 databases just fine, even though it is no longer certified by Oracle.
    First of all, can you connect to the database with SQL Plus? Make sure that works first.
    The other thing that comes to mind is the AL32UTF8 character set. Forms 6i and other older Oracle software cannot connect to databases using it. But I have only seen that problem with Oracle 10g databases, so I am not sure about the Oracle 9 db.
    Here is a thread discussing the problem: Re: connecting form 6i  to oracle database 10G express edition

  • SAP ECC6.0 installation with Oracle RAC

    Hi Expert,
    Current we working on SAP ECC6.0 installation with Oracle 10G RAC on AIX 5.3. The RAC are running on two nodes (servers). And we are using GPFS filesystem (not running on HACMP).
    Overall we had completed the Oracle RAC installation (CRS+RDBMS) and tested the oracle failover and it work find. Now we want to start with the SAP installation (with HA). In the SAP installation documentation, it did request to create a virtual hostname on the node and execute the sapinst scripts with below command line.
    #./sapinst SAPINST_USE_HOSTNAME=ascs00
    But if we are running on Oracle RAC + GPFS do we need to specify the virtual hostname? If not, which hostname i should use to install the HA for SAP?  Please advice.
    Regards.

    And then I'd continue with the documentation at:
    SAP on Oracle => SAP on Oracle Real Application Clusters (RAC) 
    There you can find several installation guides for windows/UNIX/Linux

  • First time with Oracle XML database

    Hi!
    I'm a beginner with XML and with Oracle XML database so i need same help. I've read the documentation (example for XML Oracle).
    What do i need to write XML files from an oracle database and the other way to read XML files into the database?
    Or does anyone know how i can get information about this?
    Thank's for help!
    With best regards
    Nicole

    Nicole,
    One quick way to get xml out of the database is to use the dbms_xmlgen.getXML package.
    i.e. in sqlplus
    set long 4000
    select dbms_xmlgen.getxml('select * from emp') from dual;
    or
    set long 4000
    select dbms_xmlgen.getxml('select column_name from owner.tablename') from dual;
    HTH

  • Oracle Tuxedo 8.1 With Oracle 11g Database

    Hi,
    I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
    We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
    what can be the solution for that problem?
    An Oracle 11g database config or a Tuxedo config ?

    Hi,
    When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Which latest web logic server compatible with oracle 11g database

    which latest web logic server compatible with oracle 11g database >is weblogic server 12c is compatible with oracle 11gR2

    current environment= forms and reports 10g and database 10gR2,os windows 32-bit.
    wants to implement and configure as below:
    server1: web-logic server 12c with forms and reports upgrade from 10g to 11g where os 64-bit windows.
    server2: upgrade and migrate  from 10gR2 11gR2 from windows xp to windows 2008-R2.
    how to achieve this.what step should perform first.

  • Configuring BPEL PM with Oracle XE database

    Hi,
    I have been using my BPEL PM with default olite db quite a days ago and it was running fine. Now I have changed the dehydration to Oracle XE database and chnaged the corresponding data-source.xml files.
    I can access the default domain from BPEL console and I can see the processes.
    But I am getting the error when am creating an instance of the process and also I am not able to login to the worklist application.
    The error I got is shown below.
    <2005-12-26 12:38:57,375> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cu
    be delivery": Cannot fetch a datasource connection.
    The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDat
    aSource". The exception reported is: Cannot fetch a datasource connection.
    The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDat
    aSource". The exception reported is: Listener refused the connection with the following error:
    ORA-12519, TNS:no appropriate service handler found
    The Connection descriptor used by the client was:
    152.69.213.27:1521:xe
    Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
    e datasource connection parameters (user/password) is currently valid.
    Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
    e datasource connection parameters (user/password) is currently valid.
    <2005-12-26 12:38:57,515> <ERROR> <default.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to hand
    le dispatch message ... exception ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeI
    nstanceMessage"; the exception is: Cannot fetch a datasource connection.
    The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDataSource". The exception reported is: Cannot fetch a datasource connection.
    The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDataSource". The exception reported is: Listener refused the connection with the following error:
    ORA-12519, TNS:no appropriate service handler found
    The Connection descriptor used by the client was:
    152.69.213.27:1521:xe
    Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
    e datasource connection parameters (user/password) is currently valid.
    Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
    e datasource connection parameters (user/password) is currently valid.
    Waiting for any idea to solve this issue.
    Thanks in advance
    Aki

    Similar problems, in my case I was trying out the DatabaseServer on an Oracle XE database using the Embedded OC4J A/S bundled with RC3; this combination turns out explosive :)
    The service was simply doing a select statement and the number of connections kept growing and growing during my tests; you can see them from the command line when typing `netstat -t` - eventually it just stopped working while I was testing; in the web service it reported:
    ORA-12519, TNS:no appropriate service handler found
    But my listner was running !!! I tried the connection from JDS and it complained about the same thing - then eventually I tried it from sqlplus and it showed:
    ORA-00020: maximum number of processes (%s) exceeded
    So now finally we're getting somewhere - after googling I found this web site; a good laugh:
    http://it.newinstance.it/2007/06/01/ora-12519-tnsno-appropriate-service-handler-found/
    So basically I did from the command line the following:
    lsnrctl stop;
    sqlplus "/as sysdba"
    shutdown immediate;
    startup;
    alter system set processes=150 scope=spfile;
    shutdown immediate;
    startup;
    lsnrctl start;
    Now hopefully this will solve it; I'd still like to know how to change the OC4J connection pool settings for the SOA stuff - is this possible at all or does it have some kind of minimum requirement ?
    After restarting and testing a few times; my service is actually working so I'm very pleased :)
    Regards

  • Problem in SAP Server installation with Oracle DB

    Hi,
    We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying  to download in Service market place. But we could not  get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
    We are struck with our SAP Server installation. Please consider this issue as very urgent.
    thanks in advance.
    Regards,
    Mohankumar.G

    Hello Mohan,
    Please specify which installation your are doing otherwise it is difficult to provide you
    the correct path.
    For eg if you are doing NW04's installation then path will be
    downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
    hope it helps..
    Regards,
    Jafer

Maybe you are looking for