Installation with other sap system

Hi people,
I want to know if there is any problem when installing an SAP system, a machine that already has an installed system. The likely impacts of drawbacks I should consider.
More thanks

This is not as problem as long as the box has enough resources... What systems are you planning to install?... Drawbacks usually are related to the systems sharing the same DB... so basically if any maintainance is done at DB level that require a DB restart then both systems will have to go down...
Also let me mention that this is not a good scenario in a production system... but is perfectly fine in a DEV, QAS environment.
Regards
Juan

Similar Messages

GRC Compatible with other SAP Systems

Hi experts,
I’m trying to understand the compatibility of GRC (BRM, EAM, etc.) with other SAP systems. The question came after looking at some of the configuration from SRM since I see the GRC Plug-In component installed in the system but then I don’t see the actual plug-in on SPRO. I was looking for similar information on the GRC installation guide and Config. Guide but so far no luck. Can someone point me in the right direction? Even better if there is an official document. Thanks

Hello Jonathan,
According to the installation guide of the latest release of GRC 10.1:
Install SAP solutions for governance, risk, and compliance (GRC) 10.1
on a standalone system as opposed to installing them along with an SAP
Business Suite or with any SAP Business Suite components such as
ERP, SCM, CRM, OR SRM.
The cause of the problem is because the SRM/APO system IMG root node is
different from SAP Basis IMG root node. So for the customizing SPRO
to show up for GRC under SRM system, you'd have to check the node as
described in note 1591667.
Best Regards,
Fernando

If SAP FICO as standalone system with other legacy system.

Hi All,
If SAP FICO as a standalone sytem with other legacy systems what is the impact on the SD module.
For eg: what we will miss or cant do the transcations with the SD perspective in SAP.
Thanks
ANGKS

Hi,
1. Yes all the dat needs to be copied
2. You can just assign the users in your orginazation structure to the profiles(Master data specialist, steward etc.) in BRF+
3. After copying the data to your standalone ECC 6.0 instance, all the process of data governance happens on your standalone system and once it is done you can replicate the data to your SAP 4.7 system. According to my experience, no functionalities will be missing.
Regards
Goutham Kanithi

How to find the list of different material in other SAP system.

We have two SAP different systems. there is an integration between two systems.
One system has 2 millions materails (parts) and other system has 6 millions materails (parts).
I need to know the list of what are those 4 miilions of materials in the other sap system .
How can I find out the list of the 4 millions additional material list ?
Can you please help me .
YOUR HELP WILL BE HIGHLY APPRECIATED.
Thanks in advance.

Hi,
Compare two different environments/systems in t.code: SCU0 . Also you can try with OY19
Regards,
Biju K

IDoc adapter with Non SAP systems

SAP XI 3.0 help says:
You can use the IDoc adapter to connect SAP systems (as of release 3.1) and non-SAP systems with the Integration Server using native IDoc structures
What does this mean?
-Naveen.

Hi Naveen,
Let me give a use-case in one of our projects ....we have 2 middlewares in our landscape...webmethods and XI...and in one particular instance there was a need to send an FI IDoc from webmethods to XI and forward it to R/3....
In this case, the webmethods was treated like any other sap system for receiving IDoc into XI(with settings in IDX1)...
Hope this might clarify a little bit...
Thanks,
Renjith

Data transfer using EDI from one SAP system to other SAP system

Dear all,
I understand that i should use normal ale-idoc features to transfer data from one sap to other sap system.
but can i transfer those idocs using EDI from one SAP to other SAP system

Hello,
surely you can do so.
EDI means that you transfer data in standardized EDI-formats. To get the data at the source into that formats you normally use an EDI-Converter, which maps the IDOC-format into the EDI-format. Then you send the data in EDI-format to an EDI-converter at the target. There's the reverse mapping. You map the EDI-Format into IDOC-format and book these IDOCs into SAP.
I think this makes only sense if you cross organizational borders within the business process, e.g., if you define an exchange with many customers, but not all of them have an SAP-system.
Regards Wolfgang
Edited by: Wolfgang Valtin on May 19, 2009 6:13 PM

How to copy role from R/3 to BW and other SAP systems

hello all,
I have created a role in R/3 dev systems, Now the requirement is I have to create same role in BW, GTS etc
Is there a way I can copy or transport the request from R/3 dev to other SAP systems. I am asking this becuase this role is kinda messy with lot of auth objects and it will take me lot of time to create it fresh in other systems.
Thanks in advance

You can transport the role ur use download/upload. You reach all of these function in the menu on the entry screen of transaction PFCG.
Kind regards
Frank Buchholz

How to add other SAP systems in CCMS ALE Monitoring

Hi all, how do I add other SAP systems to be ALE monitored centrally in the PI system?
I want to monitor the Idocs in the SAP R/3 system centrally in PI with CCMS. Default is only ALE for the PI system itself.

You can add additional systems to CCMS quite easily.
I would recommend this to be done in Solution Manager though!
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/40a442b024b211e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
Also, search Google for SAP CCMS Central monitoring.

How to integrate the portal system with non-sap system

Hi Gurus,
How to integrate Portal system with non-SAP system?
I know few ways .......Using Usermapping UIDPW method.
Using Appintegrator .....and using Business repository objects in JCA?
Is there anyother way to integrate if so please give me the names and steps for integrating it?
Thanks in Advance,
Dharani

Hi Dharani,
You can get information from the following links:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d08b00d73001b4e10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/sdn/thread?threadID=744043
SAP CONNECTORS:- Basically Connectors are like middlewares , that we use to connect to the backend system including Non SAP systems also. Will try to explain it to u with some examples of SAP Connectors:-
a) SAP Business Connectors:-
A middleware application based on the B2B integration server from webMethods.
The SAP Business Connector enables both bi-directional synchronous communication and asynchronous communication between SAP applications and SAP and non-SAP applications.
The SAP Business Connector makes all SAP functions that are available via BAPIs or IDocs accessible to business partners over the Internet as an XML-based service.
The SAP Business Connector uses the Internet as a communication platform and XML or HTML as the data format. It integrates non-SAP products by using an open, non-proprietary technology.
b) SAP Java Connector:-
SAP Java Connector (SAP JCo) is a middleware component that enables the development of SAP-compatible components and applications in Java. SAP JCo supports communication with the SAP Server in both directions: inbound calls (Java calls ABAP) and outbound calls (ABAP calls Java).
SAP JCo can be implemented with Desktop applications and with Web server applications.
SAP JCo is used as an integrated component in the following applications:
1) SAP Business Connector, for communication with external Java applications
2) SAP Web Application Server, for connecting the integrated J2EE server with the ABAP environment.
SAP JCo can also be implemented as a standalone component, for example to establish communication with the SAP system for individual online (web) applications.
To Know more go through,
SAP Java Connectors
II) ALE Concept:-
ALE is not restricted to communication between SAP systems, it can also be used for connecting SAP Systems to non-SAP systems.
By using IDocs as universal information containers, ALE can reduce the number of different application interfaces to one single interface that can either send IDocs from an SAP system or receive IDocs in an SAP system.
SAP certified Translator Programs can convert IDoc structures into customer-defined structures.
Alternatively, the RFC interface for sending and receiving IDocs can be used in non-SAP systems.
In both cases you need the RFC Library of the RFC Software Development Kit (RFC-SDK).
This link gives a great insight into landscape for Connectivity to Non-SAP systems:-
SAP to Non-SAP systems
III) Communication Between SAP Systems and External (Non-SAP) Systems using RFC:-
When you use RFC for communication with an external (non-SAP) system, you can also implement the SAP Java Connector or the SAP .Net Connector for the conversion of data. However, there are no specific security requirements for these components, since they only perform internal system conversion functions.
The additional security recommendations for communication with external systems in this section make particular reference to cases where an external system is used as a server (SAP calls the external system). If you use an external system as a client (the external system calls SAP), the appropriate SAP-specific security mechanisms are implemented on the SAP side.
This link explains in detail all the security considerations you need to take for connecting to an External Non SAP system like, User administration, Network Security etc.
Communication Between SAP Systems and External (Non-SAP) Systems using RFC
Hope this helps,
Regards,
Rudradev Devulapalli
Reward the points if helpful

Connectivity of BODS with other ERP systems

Hi All,
Need your help.
Can BODS connect with other ERP systems such as Lawson, Oracle EBS, Symix, MAPICS and Fourth Shift using adapter or anything?
Please Help.
Thanks Much,
Purnima

Hi Purnima Rai,
Hope the below link will help you out .
https://websmp106.sap-ag.de/~sapidb/011000358700000441762013E
Regards,
Akhileshkiran.

Accessing data from other SAP system

Hi experts
I need to access data from one SAP system from other. My requirement is , perform applications (programs) in some SAP system, but using/accessing data from other SAP system .
For example, when we press F4 we get the match code (search help) for the field ; that window is alredy created by SAP and it shows the data for that field . Of course the application (ike any other program/application) read the data from the SAP system is being executing ; well i need execute that match code but show (taking) the data from other SAP system; i not refer to other MANDT in same system but other SAP system.
The communication between SAP1 system and SAP2 system is already created from BASIS.
My doubt is how can i execute that standard application (search help) but 'invoke' to standard application this take data from other system ?
I guess i can create Z search help wich call a Z Function (RFC) to get the data required from the other system ;
or maybe enhance the standar search help to call that Z RFC ; but standard application search help is already created and this access the data in several ways or places of code , and this has severals sub-windows and search features ; and i just need execute exactly same search help but accesing data from the other SAP system ; so my doubt is, is there some way to indicate to SAP the applications always (wherever) these applications acces the data do it but from other SAP system,
like if we 'redirect' the Data Base to other SAP system.
SAP1 applications are being executing -
> but all data (records) are taking from SAP2
Maybe the first suggestion is simply why do not we execute applications in SAP2 instead SAP1 , that's because the version package in SAP2 system (where we have the data) does not support some (non SAP) applications we need to use.
Excuse the long thread. Does somebody can help, any idea ?
Best Regards
Frank

Hi Frank,
Below are my thoughts, these are only conceptual and haven't had an opportunity to try these possibilities, also not sure if this is the right thing.
1) Create an entry in DBCON using TCode: DBCO for the Database of system SAP2. Now in the application of SAP1 use the "SET CONNECTION" construct as the very first statement, so that consecutive SQL statements will point at the DB of SAP2.
2) I have read somewhere that the Work Processes are connected to the Default database and i am not sure if you can change this setting, but if you can and provided you have have multiple application servers in your SAP1 landscape, then pick one of the application servers and change the settings on the WP to point at the DB of SAP2, you have the end users login to this particualr app server.
3) If there are multiple app servers in SAP1 landscape, then choose one of the app servers and change the default database setting to point at DB of SAP2.
Regards,
Chen

Move IDOC Configuration from one sap system to other sap system

Hi All,
I have a scenario where in we need to move the SAP Configuration including Port,partner funtions details etc to other Sap system .As per my knowledge we have some SAP Standard tables which stores all the SAP Config data .So my thought is that if we move those table entries from sorce sap system to target sap system the task will be completed however i dont know which table entries i need to move.Kindly suggest.
Venu

Many of these IDoc settings are not asking for transport requests, since they are considered master data (table class A). They are to be done directly in each system, because the are often linked to information that is or might be specific, like master data, logical system names, path names, etc...
Please also search for previous discussions, you are probably not the first one encountering this issue.
Thomas

Calling RFC function module in other SAP system...

Hi,
I have a report on one SAP system and a function module on other system. The function module is RFC enabled. How can I call this RFC enabled function module from other SAP system in the report which is different SAP ?
system.
Thanks.
Regards,
Rajesh.

call the function module in orginal system in se38 ,copy the function module ,paste the function module in other system,and maintain destination here ,otherwise you will get short dump.
here detination should be SM59 destination,this is case sensitive.
Reward Points if it is helpful
Thanks
Seshu

How to copy a structure from one SAP system to other SAP system in ABAP

Hi All,
We have a requriement where need to copy an strcture of 250 feilds from on SAP system to other SAP system , do any one know how to do it .
Regards
Channu

Channappa,
It is really not hard to manually create the structure. Ctrl-Y copy from the source system screen and paste in the target system screen. You'll have to do this one page at a time. So, you will have to repeat it 9 times (or 18 times if you have to copy/paste component list and type separately).
I can assure you that you can finish the task in less than 30 minutes.

However, we've had issues with other legacy systems and programs for outlook

I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
issue.

Will:Hi! Hi!
I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
May the force be with you!

Installation with other sap system

Similar Messages

Maybe you are looking for