Installationorder for AFS 6.4 from scratch

Hi Gurus,
I hope you would like to help me:
My goal is to install AFS 6.4 from scratch with Language Slovakian (which is not part of the language-packet of AFS 6.4, but needed for FI...).
I have already installed ERP 6.0 EHP4 Ready - Support Release 1
What would be the best order to install the following components:
- Update to EHP4 SPS6
- Install Language Slovakian
- Install AFS 6.4
Thank you in advance
Rudolf

good

Similar Messages

Whats the initial DC for Web Dynpro DC from scratch

Hi,
I want to develop a Web Dynpro Development Component from scratch. So what is the default/initial DC that I have to import from DTR/JDI?.
Thanks,
Raj.

Hi,
rather sparse information... anyway if you start with the "Local Development" configuration in the IDE all required DCs should be part of the NWDS installation.
Otherwise you need to have a track configured that contains SAP_BUILDT, SAP_JTECHS and SAP-JEE. Those three SCAs contain all DCs required for Web Dynpro development.
Regards,
Marc

How to create a bootable OEL5.8 .iso from scratch?

Are there any instructions available about how to create a bootable .iso file, for installing OEL5.8, from scratch?
We need to build a system which is a customised version of OEL5.8; we want to add some extra RPMs and remove others. We have an older build system which does this based on OEL5.5, but the way it has been built makes this hard to upgrade. We'd like to try starting from OEL5.8 again.
One possibility would be to download the initial OEL5.8 .iso; mount this as a loop-back filesystem; adjust some RPMs and config; then re-create an .iso from this file. However, this doesn't allow us to update the kernel very easily. We'd prefer an approach which starts from a set of RPMs (perhaps including modified kernel RPMs) and builds the .iso from scratch.
Many thanks for any pointers.
Edited by: user11244224 on Mar 5, 2013 7:16 AM

You cannot simply edit an .iso image file because the iso9660 filesystem is read-only. And even if you create your own iso image from scratch, with a bootable code, any package you add will not be part of the initial installation, unless you recreate the appropriate software repository database and anaconda installer. Sounds like overkill to me for what you are describing.
Why would you want to go through the endeavor to adjust the Oracle Linux distribution DVD for the purpose of creating a customized system? Why not using Kickstart instead, or a simply create a post-installation script to modify the installation to your needs?

U410: Windows + Debian from scratch

Hello,
I bought a Lenovo U410 (HDD: 750 GB, SDD: 32 GB, 8 GB RAM) in Germany in August last year. It was working really good until I tried to install Ubuntu on it. When I was trying to do it, I got lots of problems because of the RAID configuration (I read many users had the same problem). I wasn't able to do it, and as I needed the laptop to work and I didn't have the time to investigate how to install both operating systems without problems, I just managed after a while to reinstall Windows on the HDD. So now I'm not using in fact the SSD drive, and I even have a problem with the partitions on that drive, as you can see in the image attached.
Link to image
Now I need to format everything again and install both Windows (with a partition for the OS and another for data) and Debian from scratch. The problem is that I'm not pretty sure how to do it properly, beacuse of the problems I had before. In fact, I don't even know which would be the best configuration (regarding partitions, RAID, OS on SSD or HDD, drivers, etc, etc...). Could anyone give me advice on this and a set of instructions to do it right? In addition, I have the drivers which came with the laptopt, but should get the new versions?
I would really appreciate your help, as I need to get this ASAP.
Thanks in advanced!
Moderator comment: Image(s) >50KB (or totaling >50KB) converted to link(s). Community Rules.

Anyone can help me?

Airport Utility for my Airport Extreme needs to be changed to a different computer, because the current computer is down permanently.. How do I do this? Do I have to reset the Airport Extreme and start from scratch?

The computer (Win XP) on which the Airport Utility has been set up for the past few years is no longer accessible, so I need to set it up on a different computer. Can I do that with my exisitng wireless network, or will I have to set up a new network from scratch, once I have installed Airport Utility on the new machine?

You can install AirPort Utility on either a Mac or PC, but there would be no reason to make any changes to your existing configuration on the AirPort Extreme unless you need to do so.
Download files are here:
http://support.apple.com/downloads/#airport

Creating from scratch, a css layout for my website

I am building a website from scratch and I would like to use CSS. I am conceptualizing the design, however, I am struggling with designing it and working with the div tags. I would like to have two sidebars, one on each side, and for them to be tri-colored, which means I have to create three small boxes and align them closely together, each a different color (the colors are part of the theme to my website). Of course the links on the sidebars would be white, and then change colors when hovered over or clicked on. I would like to have a header and a footer, with the header containing my logo and if and only if I can get real fancy; a scrolling message. My footer would contain additional links such as 'additional links', and 'contact us' and all the necessary copywrite info. Please let me know, if first, my conception of this layout makes sense, and if so, what tutorial you could recommend for me to view that would assist in my web site development.
Thank you, all you great tech minds out there!

I'm with Murray. I don't think you should concern yourself with HTML5 and CSS3 yet.
Stick with XHTML and CSS2. When I was learning to work with CSS positioning, it was immensely helpful to use a pre-built layout.   And I learned a great deal from looking at source code.
Look at the DW Starter pages described below:
     Dreamweaver CSS Templates for beginners
     http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html
     New DW Starter Pages --
     http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
If you have some money to spend, Project Seven has some excellent CSS Templates. If you plan to do more projects, CSS Layout Magic is a nice extension for prototyping inside DW.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcome

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

I just bought iPhone 5c. Looking for LifeProof case. Does Nuud will protect my screen from scratches and shatter? Or should I go with Fre?

I just bought iPhone 5c. Looking for LifeProof case. Will Nuud protect screen from scratches and shatter? Or should I go with Fre?
Thank you for suggestions.

Have a look at this comparison from the manufacturer.
http://www.lifeproof.com/blog/2013/10/nuud-or-fre-lifestyle/

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

Create blu-ray menu for concert from scratch

Hi all,
I downloaded the Premiere Elements 11 trial yesterday and am evaluating it for purchase.
My first project is a blu-ray of a concert. I am on Windows 7 64bit.
Project settings are:
AVCHD 720p square pixel
1280x720
29.97fps
30fps drop-frame timecode
I want to create a simple menu for blu-ray (ie an HD menu) that has a still background and simple text buttons. The top menu would just have "play concert" and "track selection" text only buttons. The "track selection" button would lead to a page with all the track names as buttons that link to the scene markers for each track. That's it.
I only see pre-installed templates and none of them have the "HD" designation in the top right hand corner. How do I go about achieving the menu that I want?
Thanks, Ben

Along with Steve's suggestions, one can customize the existing PrE Menu Sets, just relying on the "background" Menu Set structure, and adding Still Images, plus doing limited customization to the Text, etc.
To create PrE Menu Sets (like those on Muvipix), one needs two things:
Photoshop (Photoshop Elements has one limitation - it cannot create Layer Sets, unless that has been added to PSE, as of version 11), and then knowledge of what goes into a PrE Menu Set. Because much of the authoring functions in PrE are semi-automatic, the Menu Sets are very involved. Though I create Menus for Adobe Encore, from scratch in Photoshop, I still need one of the Library PrE Menu Sets handy, to get all of those semi-automatic conventions in front of me - lot of stuff required there.
If you cannot customize an existing PrE Menu Set, or find similar at Muvipix, then we can offer some links, that will be helpful, but I strongly recommend that one spend a day, doing a study of the Library Menu Sets, and still having one handy, for the specifics, required. It also helps, if one understands the naming and structural conventions of DVD Menus, and then especially PrE Menu Sets.
Good luck, and let us know if you can find what you need, or something close, that you can customize.
Hunt

My daughter is locked out of her ipad...has been for months. we want to start using it now and are trying to disable it and start all over from scratch. what should we do?

my daughter is locked out of her ipad. has been for months. we want to disable it and start all over from scratch.what do we do?

Will the iPad power up by holding down on the power button until the Apple logo appears on the screen? If it does, try restoring using recovery mode.
Recovery mode - Support - Apple

My iphone is installed to my PC and my PC got rebooted from scratch so I have to reinstall Itunes. When I hook back my Iphone4 to Itunes for backup, will it erase everything or will it still have my data?

Girl needs help here!
My Iphone4 is registered to my itunes in my PC. My PC then got virus and had to be rebooted from scratch and so lost a lot of data. I reinstalled my itunes and registered my account and it looks like the musics bought through Itunes is reinstalled. NOw Im afraid that if I hook back my Iphone4 to the reinstalled itunes, I will lose all the numbers and data in my iphone . Please help! cant imagine writing down to pen and paper all data i have in my phone

Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
More info on backups here: http://support.apple.com/kb/HT1766

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

Query based taxonomy from scratch gives NoSuchMethodError...

I'm trying to create a query based taxonomy following the instuctions specified in the help docs: KM Platform -> Admin Guide -> Content Mgmt -> Taxonomies and Classification -> Creating a QBT -> from scratch. I created an index on a newly created (hence empty) folder in the 'documents' repository. So, essentially, the data source points to that folder. Also, I selected 'TREX Classification' on the 'Service' drop-down while creating the index. I left the crwler profile as blank. Then I went on to create a new 'Query Based Taxonomy'. I was able to create it alright, but as soon as I click on it to add folder and the such, I get this error:
java.lang.NoSuchMethodError
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getDocumentTaxRMRids(TaxonomyNamespaceManager.java:1876)
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getTaxonomyClassResources(TaxonomyNamespaceManager.java:1831)
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.addChildDocuments(TaxonomyNamespaceManager.java:1942)
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getChildren(TaxonomyNamespaceManager.java:368)
     at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:966)
     at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:179)
Any help in solving this is highly apprecaited.
We run EP6 SP2.
I did NOT create a 'crawler profile' for this set up.
thanks,
Biju.

Hi Biju,
re. your NW'04 SP stack 4 migration intention:
NW'04 is still in ramp-up (SP stack 4 is the current shipment bundle of it) so at the current point in time, only participating ramp-up customers can use it.
A migration from EP6.0 SP2 to NW'04 will be possible (but not during the ramp-up phase).
From a Knowledge Management & Collaboration perspective, we will port most of the NW'04 SP stack 4 functions to EP6.0 SP2 as well. These functions will be shipped as EP6.0 SP2 Patch 5 (planned shipment date beginning of Q4 / 2004) so for mid-term, you can also plan to stay on EP6.0 SP2 if you have no other pressing reasons for going to NW'04 (e.g. enhanced Web AS functions).
This feature porting from NW -> EP6.0 SP2 is an 'only-once' action, however, and NetWeaver will be the release for new features in the future.
Regards,
Joerg

I am trying to create a RSS feed from scratch

Okay so I want to create a RSS feed with these two links:
http://www.networkcomputing.com/rss.php
and
http://www.voip-news.com/rss/vnar.xml
I have checked out different widgets and what not but I want to create this from scratch.
I started this xml file:
<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0">
<channel>
<title>Network Computing</title>
<link>http://www.networkcomputing.com/all.xml</link>
<description>Top stories and blogs</description>
<lastBuildDate>Wed, 14 Jul 2010 10:19:00 GMT</lastBuildDate>
<language>en-us</language>
<item>
<title>Catbird, Hytrust Offer Integrated Virtualization Compliance Reporting
</title>
<link>http://www.networkcomputing.com/virtualization/catbird-hytrust-offer-integrated- virtualization-compliance-reporting.php</link>
<guid>http://www.networkcomputing.com/virtualization/catbird-hytrust-offer-integrated- virtualization-compliance-reporting.php</guid>
<pubDate>Wed, 14 Jul 2010 10:19:00 GMT</pubDate>
<description>Virtualization security companies Hytrust and Catbird will offer integrated compliance reporting that encompasses the hypervisor-host and network environment down through the virtual machine level. Catbird vSecurity, delivered either as a hosted service or virtual appliance, ensures correct hypervisor configuration and deploys network access control (NAC) against unauthorized access and protection against attack via IDS/IPS. Its VMShield component protects client VMs, tracks them as they move and enforces policy.</description>
</item>
</channel>
</rss>
So I created a button on my home page, and it is linked to this XML file. Everything works great except it only shows the item that I coded in...I want it to show ALL items.
Can I do this without having to input each item individually?
Is this how I should do it anyways with a button linking to this xml file?
I really want to have like 3-5 of the posts to auto update on my home page but I dont know how to embed the RSS into my HTML home page file.
Also, the way I have it coded, will it automatically update the new posts?
or do I have to wait for the new post and input the item into the xml file?
I am very new to the RSS feed so please help.
Thanks,
cp

Here is my HTML code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>

</style>
<script type="text/javascript">

</script>
<link href="styles.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet" type="text/css">
<style type="text/css">
body {
    background-color: #3B5998;
.style2 {
    font-size: 14px
.style6 {
    font-family: Arial, Helvetica, sans-serif;
    font-size: 11px;
    color: #97B1F4;
.style7 {color: #FFFFFF}
.style8 {
    color: #97B1F4;
    font-weight: bold;
    font-size: 12px;
    font-family: Helvetica;
    margin-left: 35px;
.style9 {color: #97B1F4}
.style10 {
    color: #97B1F4;
    font-size: 12px;
    font-family: Helvetica;
    font-weight: bold;
.style11 {
    color: #97B1F4;
    font-size: 12px;
    font-family: Helvetica;
</style>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<script src="http://config.spry-it.com/js?f=1.7/data/1.7/jsondataset/nestedjsondataset"></script>
<script src="SpryAssets/SpryDataYQLDataSet.js"></script>
<script>
var dsItem = new Spry.Data.YQLDataSet(
    'select * from xml where url="http://www.networkcomputing.com/all.xml"',
    false,
        format:"xml",
        preparseFunc: function( strxml ){
            var xml = Spry.Utils.stringToXMLDoc( strxml ), ds = Spry.Data.XMLDataSet.getRecordSetFromXMLDoc( xml, "rss/channel/item" );
            return ds.data;
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
</head>
<body>
<div id="container">
<div id="banner"></div>
<div id="navigation">
<div id="navbar">
<ul class="style2">
    <li><a href="index.html">Home</a></li>
    <li><a href="solutions.html">Solutions</a></li>
    <li><a href="services.html">Services</a></li>
    <li><a href="support.html">Support</a></li>
    <li><a href="about.html">About</a></li>
    <li><a href="contact.html">Contact</a></li>
</ul>
</div>
</div>
<div id="navigation2">
<img src="images/navigation_2.jpg" />
</div>
<div id="content">
<div id="right_content">
<div id="video">
<embed src="network.mp4" width="320" height="162" autostart="true" style="background-color: Black; " type="video/quicktime" autoplay="true" loop="true" controller="true" pluginspage="http://www.apple.com/quicktime/download/"></embed>
</div>
<div id="title_bar">
    <p class="style8"><a target="_blank" href="http://www.networkcomputing.com/all.xml">RSS Network Computing</a></p>
    </div>
<div id="PageWrap">
<div class="MasterDetail">
<p class="style10">Select a Channel:</p>
    <div spry:region="dsItem" id="MasterContainer" class="MasterContainer">
      <div spry:repeat="dsItem" spry:test="{ds_RowID}<4" spry:choose="choose">
        <div class="MasterColumn" spry:when="{ds_RowID} == {ds_CurrentRowID}" spry:select="MasterColumnSelected" spry:selectgroup="master" spry:selected="MasterColumnSelected" spry:hover="MasterColumnHover" spry:setrow="dsItem">{title}</div>
        <div class="MasterColumn" spry:default="default" spry:select="MasterColumnSelected" spry:selectgroup="master" spry:hover="MasterColumnHover" spry:setrow="dsItem">{title}</div>
      </div>
    </div>
    <br/>
    <div spry:detailregion="dsItem" class="DetailContainer">
      <div class="DetailColumn"><span class="style9">Category:</span>  <span>{category}</span></div>
      <div class="DetailColumn"><span class="style9">Published:</span>  <span>{pubDate}</span></div>
      <div class="DetailColumn"><span class="style9">Author:</span>  <span>{author}</span></div>
      <br/>
      <div class="DetailColumn"><span class="style9">Description:</span><br><span>{description}</span>  <button onClick="MM_openBrWindow('{link}','','')">More...</button></div>
    </div>
    <br style="clear:both" />
</div>
</div>
<div id="title_bar">
    <p class="style8"><a target="_blank" href="http://www.voip-news.com/rss/vnar.xml">RSS VoIP News</a></p>
    </div>
    <p class="style11"><a href="voip_rss.html">View Now (Click Here)</a></p>
</div>
<div id="left_content">
</div>
<div id="logos">
</div>
</div>
<div id="footer">
<div id="footerbox">
<p class="style6"><span class="style7">Stanford Technologies</span> © Copyright, 2010. All Rights Reserved. Powered by <span class="style7">Chris Proett</span></p>
</div>
</div>
</div>
</body>
</html>
I just want to take away the scroll bar in FF.

Installationorder for AFS 6.4 from scratch

Similar Messages

Maybe you are looking for