Installations on domain controllers are not supported

Hi All, While checking prerequisites of operating system users and groups, following error message are getting. "installations on domain controllers are not supported". Please help. Thanks, Sam

Hi Sam,
I assume as a technical limiation from SAP. which I suppose being as a local user or even as a local group cannot be done or created on Domain controller..
"You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the domain controller is installed.
I hope it helps.
Regards,
Deepanshu Sharma

Similar Messages

Error in Installing Netweaver--domain controllers are not supported

When i make the pre-requisite check for installing Netweawer 2004s
I am getting the follwoing error
<b>installation to domain controllers are not supported</b>
Pls help me how to resolve this
Thanks in Advance

hi balaji,
FYI,
You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the DNS service is installed.
so try to log with a user, who has administrator rights. and check whtr all the services are up & running. then try to re-install.
for more on this refer the installation manual.
hope this will help you.
with regards,
Rajesh.
<i> plz, award with suitable points </i>

URGENT!! Demoted SBS server and now no other Domain Controllers are functioning

Last night we were demoting a 2003 SBS in a domain. We have 3 other domain controllers that were online and appeared to be functional. All were shown in Sites and Services as GC. However, after demoting the SBS server, our other Domain controllers are not
functioning as GCs or as DCs.
I can get into Sites and Services if I let it fail when it tries to connect to the domain and then tell it to connect to the specific domain controller. But then things don't look quite right. I can't see all the tabs when I drill down to NTDS Settings and
go to properties. The only tabs that show up are Security and Attribute Editor. Same thing with ADUC, I only get some of the tabs. It is like only half of AD is there.
I need some urgent help if anyone can assist.

Hi,
In order to identify the cause, I suggest you run
DCDiag command on a Domain Controller, and post out the results for troubleshooting:
Dcdiag
http://technet.microsoft.com/en-us/library/cc731968.aspx
What does DCDIAG actually… do?
http://blogs.technet.com/b/askds/archive/2011/03/22/what-does-dcdiag-actually-do.aspx
Best Regards,
Amy Wang

IOS AIR3.6 runtime error 3747 Multiple application domains are not supported on this operating syst

3747
Multiple application domains are not supported on this operating system.
I'm getting this error from an IOS app compiled with air 3.6.
No code has changed from Air 3.5 which is error free. Web app / android versions of the same codebase do not error.
See the stackTrace below ( well done Adobe for providing this since air 3.5 !! )
I use swfloaders for loading embedded swf vector art graphics. This has not caused any issue until now. Should I load all art into the main app's application domain ?
The error does not crash the app and I could suppress it easily but is could the tip of the iceberg because application domains are scary stuff.
Error: Error #3747
        at flash.display::Loader/loadBytes()
        at mx.core::MovieClipLoaderAsset()
        at mx.controls::SWFLoader/loadContent()
        at mx.controls::SWFLoader/load()
        at mx.controls::SWFLoader/initializeHandler()
        at flash.events::EventDispatcher/dispatchEvent()
        at mx.core::UIComponent/dispatchEvent()
        at mx.core::UIComponent/set processedDescriptors()
        at mx.core::UIComponent/initialize()
        at com.komodomath.app::ImageSWFloader/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/setMXMLContent()
        at spark.components::Group/set mxmlContent()
        at spark.components::SkinnableContainer/set mxmlContent()
        at spark.components::SkinnableContainer/createDeferredContent()
        at spark.components::SkinnableContainer/createContentIfNeeded()
        at spark.components::SkinnableContainer/createChildren()
        at mx.core::UIComponent/initialize()
        at com.komodomath.lesson::SaveStatusCheck/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/addElementAt()
        at mx.states::AddItems/addItemsToContentHolder()
        at mx.states::AddItems/apply()
        at mx.core::UIComponent/applyState()
        at mx.core::UIComponent/commitCurrentState()
        at mx.core::UIComponent/setCurrentState()
        at mx.core::UIComponent/set currentState()
        at com.komodomath.maingroups::LessonGroup/handleNewLessonClick()
        at com.komodomath.maingroups::LessonGroup/___LessonGroup_KButton1_click_lessonOver()

same issue as http://forums.adobe.com/message/4736711

Cluster in a box with Guest LDOMs : SCSI-3 reservations are not supported

Hello,
I recently installed the Oracle Solaris Cluster 4.1 in two simple Guest LDOMs (OVM for SPARC 3.1) with one T5140 server and SE 7110 as a shared storage. The some SE 7110 whole LUNs mapped as VDS devices to both LDOMs. After initial installation of Oracle Solaris Cluster 4.1 I observed issues with quorum device - both nodes cannot get SCSI3 (default) persistent reservation keys information at same time - only one node can be able to scrub. After switching cluster's global fencing option to "nofencing" (with "software" quorum implementation) both nodes can access quorum device successfully. So I can conclude that SCSI3 PGRs are not supported in this cases.
Unfortunately I didn't find any official and nonofficial documents info regarding this limitation. Could you please confirm or decline my suggestion.
Thanks.

I am answering on my question by itself
Planning the Oracle Solaris OS - Oracle Solaris Cluster Software Installation Guide
Fencing – Do not export a storage LUN to more than one guest domain on the same physical machine unless you also disable fencing for that device. Otherwise, if two different guest domains on the same machine both are visible to a device, the device will be fenced whenever one of the guest domains halts. The fencing of the device will panic any other guest domain that subsequently tries to access the device.
RTFM...

Maven giving "annotations are not supported in -source 1.3" for @Entity

I m using maven for spring, hibernate with jpa . When i m running comman "mvn clean install" ,it is giving error in compilation of a bean class which is using jpa annotations.The error is :
annotations are not supported in -source 1.3
(use -source 5 or higher to enable annotations)
@Entity
Pom.xml is as below :
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.niit.core</groupId>
<artifactId>Spring3Example</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<name>Spring3Example</name>
<url>http://maven.apache.org</url>
<properties>
<org.springframework-version>3.1.2.RELEASE</org.springframework-version>
</properties>
<repositories>
<repository>
<id>JBoss Repo</id>
<url>https://repository.jboss.org/nexus/content/repositories/thirdparty-releases</url>
</repository>
</repositories>
<build>
<plugins>
<plugin>
<artifactId>maven-war-plugin</artifactId>
<version>2.0</version>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-context</artifactId>
<version>${org.springframework-version}</version>
</dependency>

<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
<version>${org.springframework-version}</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>javax</groupId>
<artifactId>javaee-api</artifactId>
<version>6.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-core</artifactId>
<version>3.6.10.Final</version>
</dependency>
<dependency>
<groupId>org.hibernate.java-persistence</groupId>
<artifactId>jpa-api</artifactId>
<version>2.0-cr-1</version>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-entitymanager</artifactId>
<version>3.5.0-Beta-2</version>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>2.5</version>
</dependency>
</dependencies>
</project>
And class is as below :
package com.niit.form;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.Id;
import javax.persistence.Table;
@Entity
@Table(name="CONTACTS")
public class Contact {
@Id
@Column(name="ID")
@GeneratedValue
private Integer id;
@Column(name="FIRSTNAME")
private String firstname;
public String getFirstname() {
return firstname;
public void setFirstname(String firstname) {
this.firstname = firstname;
public void setLastname(String lastname) {
this.lastname = lastname;
public Integer getId() {
return id;
public void setId(Integer id) {
this.id = id;
}

java version is 1.6.0_24
There is no settings.xml in users/.m2
I think , maven is using default settings.xml which is in M2_HOME\conf which has everything commented as below:
<?xml version="1.0" encoding="UTF-8"?>


<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">




<pluginGroups>

</pluginGroups>

<proxies>

</proxies>

<servers>


</servers>

<mirrors>

</mirrors>

<profiles>


</profiles>

</settings>

I can't open application "Setup EXE" because Microsoft Windows applications are not supported on OS X.

I can't open application "Setup Exe" because Microsoft Windows applications are not supported on OS X! How do I install Windows software?

Sorry I misinformed you this is update bundle, if you already have Office installe, you can search Amazon for Micrsoft Office for Mac, sorry for the error,
Check here:
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B0064PFB9U/ref=sr_1_1?ie=U TF8&qid=1387734396&sr=8-1&keywords=microsoft+office+mac+download
Also check around you may find better pricing, I included tis for an example.

Nokia Asha 501 - Some apps are not supported

i have see some applications are not supported why?
Moderator's Note: The title of this post has been edited as it is created as a new topic.

Nokia Store wrote:
English: You need to update your phone software before you can download this app
German: Sie müssen die Software Ihres Telefons aktualisieren, bevor Sie dieses Programm herunterladen können
Same here, when I go for that 4shared app in the Nokia Store. When I download that JAD directly via the Internet (Nokia Xpress browser) and http://store.ovi.com/content/536062/Download I get:
Nokia Asha 503 (Product Code: 059V3Z1) wrote:
English: 4shared can't be installed. The trusted certificate that was used to authorise the app is corrupt. Please contact the app provider to get this fixed.
German: 4shared kann nicht installiert werden. Das vertrauensw. Zertifikat zur Autorisierung d. Progr. ist beschädigt. An Programmanbieter wenden.
That is nice, because this app was not signed by its author but by the Nokia Store team with the ‘Nokia Online CA I’. Then on my computer, I downloaded that JAD, placed it on a microSD, inserted that microSD into my Nokia Asha 503, and installed via Files » Memory card » 4shared_Mobile_0_5_3: It installed successfully and works! However, it was not placed into the manufacturer domain but in the third-party domain.
I have no idea what is wrong with this app, yet. Please, let the examples come in! Perhaps more examples, we find a pattern together.

Help! Some features of Mac OS X Mavericks are not supported for the disk "Macintosh HD"

I'm on a MacBook 13" mid 2010, OS X 10.7.5, I want to upgrade to OS X Mavericks. I have searched around for a few days, I find people with the same problem but can't really get the solution for it. I prefer not to reinstall OS X, I want to upgrade. I don't have boot camp or something just a 250 GB HD.
Well, while I'm trying to upgrade from the download from Apps Store, I open the installer, press continue then accepts the Terms.. then select Macintosh HD and click install, then an warning message shows up "Some features of Mac OS X Mavericks are not supported for the disk "Macintosh HD"
As I've read the article that is included in the waring message i did try to install anyway because it say that I would be fine, but when i did try to install the installer starts and after like 3 minutes a window appears, Install Failed.
I've even try to make a installer on USB, both with the command in terminal and with Diskmaker, but it does not help.
It seems impossible to upgrade. Please Help me.

First, see the heading "What to do if the installer warns that no Recovery System can be created" in this support article. If you use Boot Camp, back up and delete the Windows partition using Boot Camp Assistant. Try the installation again.

How to Overcome DomainOperationEntry overloads are not supported in C#

Hi Team ,
I have a assigmmnet to finsh . requerment is
1) I have to Comboboxes one is cmbDomain , second one is cmbSubDoamin
based on selected value in cmbDoman , cmbSubDoamin has to fill.
for this I am using WCFRIA Serivice
In sercive I have two methods like bellow.
//for Domain
public IQueryable<DomainGroup> GetDomainGroups()
return this.ObjectContext.DomainGroups;
// for SubDoamin
public IQueryable<Domain> GetDomains()
return this.ObjectContext.Domains;
//for subdomain based on selected value in Domain
public IQueryable<Domain> GetDomains(string selectedDomain)
return this.ObjectContext.Domains.Where(x => x.Title.ToUpper() == selectedDomain.ToUpper());
in Silverlight i implimented bellow code
<riaControls:DomainDataSource x:Name="source" QueryName="GetDomainGroups" AutoLoad="True"> <riaControls:DomainDataSource.DomainContext>
<domain:DomainService1/> </riaControls:DomainDataSource.DomainContext>
</riaControls:DomainDataSource>
<riaControls:DomainDataSource x:Name="SubDomainSource" QueryName="GetDomains" AutoLoad="True">
<riaControls:DomainDataSource.DomainContext>
<domain:DomainService1/> </riaControls:DomainDataSource.DomainContext>
<riaControls:DomainDataSource.QueryParameters>
<riaControls:Parameter ParameterName="selectedDomain" Value="{Binding Path=SelectedValue,ElementName=cmbDomain}"/> </riaControls:DomainDataSource.QueryParameters>
</riaControls:DomainDataSource>
<StackPanel Orientation="Vertical">

<sdk:Label Content="Domain"/>
<ComboBox x:Name="cmbDomain" ItemsSource="{Binding Data,ElementName=source}" DisplayMemberPath="Title" Height="50" Width="100"></ComboBox>
<sdk:Label Content="Sub Domain"/>
<ComboBox x:Name="cmbSubDomain" ItemsSource="{Binding Data,ElementName=SubDomainSource}" DisplayMemberPath="Title" Height="50" Width="100"></ComboBox>
</StackPanel>
if any one help it could be a great support for me .
Srilatha

You can't use overloads.
You need to rename one of your GetDomains:
public IQueryable<Domain> GetDomains()
return this.ObjectContext.Domains;
//for subdomain based on selected value in Domain
public IQueryable<Domain> GetDomains(string selectedDomain)
return this.ObjectContext.Domains.Where(x => x.Title.ToUpper() == selectedDomain.ToUpper());
from
https://msdn.microsoft.com/en-us/library/ee707366%28v=vs.91%29.aspx?f=255&MSPPError=-2147217396
General Rules for using Inheritance
The following rules apply to using inheritance with RIA Services.
Inheritance is supported only for entity types. Non-entity types are treated as the type specified in the domain service operation signature.
Interface types are not supported for return values or parameters in domain service operations.
The set of types in an inheritance hierarchy must be known at the time of code generation. The behavior for returning a type not specified at the time of code generation is unspecified and implementation-dependent.
The virtual modifier on public properties and fields for an entity type is permitted but ignored when generating the corresponding entity type on the client.
Method overloads for domain service operations are not permitted.
The new (C#) and Shadows (Visual Basic) keywords on public properties are not allowed on entity types and will result in an error when client code is generated.
LINQ query capabilities related to inheritance cannot be translated for execution of domain service methods. Specifically,
OfType<T>, is,
as, and GetType() operators and methods are not supported. However, these operators may be used directly against
EntitySet or
EntityCollection<TEntity> in LINQ to Objects queries.
Hope that helps.
Technet articles: Uneventful MVVM;
All my Technet Articles

Some features of Mac OS X Lion are not supported for the disk

At the beginning of the installation on my MacBook Pro (early 2008, non-unibody) this alert appeared. The disk is partitioned into three partitions: 1. = Photoshop-scratch, 2. = System, 3. = Bootcamp. It seems that this causes the system-message. What could be the reason for that: The Photoshop-partition or Bootcamp? Is it possible to erase just the PS-partition and then install Lion or do I have to reformat the disk?
Message was edited by: Stefan Gregor (... **** orthography ...)

OS X Lion: 'Some features of Mac OS X Lion are not supported for the disk (volume name)' appears during installation

"URL's with the type "file." are not supported"

"URL's with the type "file." are not supported" Can anyone tell me how to remove this message?
I installed Lion and I see a lot of people have the same problem.
Help

Not a nice answer!
Posting "Check the 'More like this' area" and not simply providing the answer is a great way to make these groups worthless. Hence, for a while, all I would get is versions of this same arrogant message.
Here's the answer so someone else doesn't get locked into the same loop I did:
I just solved my problem, which was the same perplexing message that kept popping up. It happened to be a Time Machine issue. When I installed Lion, apparently the Time Machine had been turned on by the installer because it kept searching for the Apple.com server, to which I'm not subscribed. Prior to the installation I had always backed up to an external HD; not Apple's online service. Searching Apple Support Forums, I found "Troubleshooting Time Machine' and followed the instructions to "reset Time Machine". Now things are back to normal. I hope this is of some help.

Error message: "FireWire connections are not supported. To transfer songs"

I recently purchased a Monster iCarPlay to play my ipod in my car. I have had no problems until recently. Upon disconnecting my ipod from the iCarPlay wire, I the following message popped up: "FireWire connections are not supported. To transfer songs, connect the USB cable provided." It also prompts me to click the center button to dismiss the message. However, I'vd followed these instructions, and the message does not go away. Does anyone know what I can do to resolve this problem? Or is it anything to worry about?

That is the message you see when you attach a 5th gen iPod to a computer using FIREWIRE. so... i suspect that for some reason, the 3rd party iCarPlay device must be confusing the iPod into thinking it is being docked or attached to a data line of some type and not simply charging.
As for the sudden occurrence of the message, it does seem strange however, keep in mind that you are using a 3rd party device that may not be supported or endorsed by Apple at all.
Beavis2084

"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?

i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad. what can i do?

I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad. what can i do?

Highlight the movie, go to iTunes menu ADVANCED and select create iPad and AppleTV version.

Installations on domain controllers are not supported

Similar Messages

Maybe you are looking for