Installe lightromm 4 sur windows xp preofessionnel

Bonjour, j'ai acheté lightroom 4 et je ne suis pas capable de l'installer sur mon portabel, j'ai windows xp professionnel et y a t-il moyen d'installer le logiciel même si nje n'ai pas windows 7?  Merci de me repondre car je veux aussi acheté photoshop element 11 et je veux etre capable de l'insaller aussi.

Hi,
Lightroom 4 ne fonctionne pas avec Windows XP. Cette décision ne vient pas à la légère et se fonde sur un certain nombre de facteurs. Avec chaque version de Lightroom, notre objectif est toujours de fournir une excellente et constante expérience client. Développer et tester entre les versions et plates-formes de système d'exploitation pour s'assurer que nous atteignons cet objectif est un effort important qui prend du temps et des ressources. XP est sensiblement différent de Windows Vista et Windows 7, et nécessite une matrice de tests indépendants, ce qui augmente la complexité de nos efforts de développement. Chaque cycle, nous devons prendre des décisions de compromis de ressources difficiles et le soutien du système d'exploitation rivalise fortement avec de nouvelles fonctionnalités et améliorations de performances prévues pour chaque version. La décision de ce cycle était de mettre fin au soutien XP pour Lightroom aller de l'avant.
Comme suggéré par kglad veuillez passer par l'exigence système pour exécuter Lightroom 4. Je vous suggère de bien vouloir mettre à jour votre système d'exploitation Windows 7, ou 8.
Cordialement,
Romit Sinha

Similar Messages

  • Installation OracleXE112_Win64 sur Windows 8.1 Pro

    Bonjour,
    J'ai tenté d'installer Oracle 11g XE sur les postes de deux stagiaires (qui arrivent la semaine prochaine...).
    Les deux postes sont en Windows 8.1 Pro 64 bits, la compatibilité semble OK : Oracle® Database Express Edition
    Ma question est la suivante : Comment créer ma base XE si l'installation ne le fait pas toute seule ?
    (Et accessoirement, pourquoi ne l'a-t-elle pas fait dans mon cas ?...)
    Merci d'avance pour votre aide,
    Thomas
    ------- Mes pérégrinations, aussi résumées que possible... -------
    J'ai procédé par deux fois à une installation standard, toutes les options par défaut, à part le mot de passe bien sûr.
    Deux fois le même résultat: L'installation se termine sans erreur ni incident, mais 127.0.0.1:8081/apex ne répond pas.
    OracleServiceXE et OracleXETNSListener sont en cours d'exécution.
    tnsping XE me renvoie "OK (30 msec)".
    Mais ça se gâte quand je veux me connecter via SQLPLUS:
    Enter user-name: SYS as SYSDBA
    Enter password: (...)
    ERROR:
    ORA-12638: Credential retrieval failed
    J'édite le fichier sqlnet.ora pour passer SQLNET.AUTHENTICATION_SERVICES à (NONE).
    Je peux alors me connecter :
    Enter user-name: SYS as SYSDBA
    Enter password:
    Connected to an idle instance.
    SQL> startup;
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file 'C:\ORACLE\app\oracle\product\11.2.0\server\dbs/spfileXE.ora'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) Le fichier sp┐cifi┐ est introuvable.
    En effet je ne trouve presque rien dans "C:\ORACLE\app\oracle\product\11.2.0\server\dbs", seulement un exemple inutile d'init.ora.
    Je récupère un init.ora qui m'a l'air assez complet, dans config\scripts. (en PJ)
    Et je retourne dans sqlplus :
    SQL> create spfile from pfile='C:\ORACLE\app\oracle\product\11.2.0\server\dbs\initConfigScripts.ora';
    File created.
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size                  2260048 bytes
    Variable Size             616563632 bytes
    Database Buffers          444596224 bytes
    Redo Buffers                5517312 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    Et dans "C:\ORACLE\app\oracle\diag\rdbms\xe\xe\trace\alert_xe.log", je trouve :
    ORA-00210: cannot open the specified control file
    ORA-00202: control file: 'C:\ORACLE\APP\ORACLE\ORADATA\XE\CONTROL.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) Le fichier spécifié est introuvable.
    Il apparaît donc (après quelques tentatives pour recréer les fichiers de contrôle) que la base XE n'a pas été créée.
    Je n'ai aucun fichier .dbf nulle-part.
    Suite à des recherches j'ai vérifié que le fichier KEY_XE.reg était bien présent au moment de l'install.
    Si vous voyez d'autre choses à vérifier... merci !

    Ok.
    I waited for an answer before trying to reinstall, because of the many problems I had with previous versions when re-installing on the same computer.
    So, let's go.
    "InstallShield Wizard Complete
    Setup has finished installing Oracle Database 11g Express Edition on your computer"
    Fine.
    Double-clic on "Get Started With Oracle Database 11g Express Edition"
    --> Error pop-up, title "http://127.0.0.1:%HTTPPORT%/apex/f?p=4950"
    "Windows ne trouve pas 'http://127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Vérifiez que vous avez entré le nom correct, puis réessayez"
    Now it's worse, The install process didn't even translated %HTTPPORT% in 8081.
    And "C:\ORACLE\APP\ORACLE\ORADATA\XE" is still empty, as is "C:\ORACLE\app\oracle\product\11.2.0\server\dbs"
    I tried once more, with 'Compatibility Setting', not better...

  • Applicatio​n développée sur Labwindows 2009 (9.1.0) fonctionne sur Windows XP et pas sur Windows 7

    Bonjour à tous,
    J'ai développé une application sur Windows CVI 2009 (9.1.0) qui fonctionne sur Windows XP parfaitement, qui s'installe et se lance sur cet OS mais qui ne fonctionne pas sur Windows 7 32.
    Le fonctionnement est le suivant, avec le kit d'installation créé sur Windows XP (mon PC de développement), l'application s'installe. Par contre, une fois que l'on veut l'exécuter, rien ne se passe.... Pas de lancement de l'UIR, pourtant présente sur le PC. De plus, l'application est lancée car elle apparait dans la liste des processus et consomme de la mémoire.
    J'ai déjà fait cette démarche pour des petites application de test très simple (1 seul panel) et tout marchait parfaitement, l'UIR se lançait bien.
    Merci d'avance si vous avez une idée du problème ou simplement une piste de réflexion...
    Bonne journée!

    Mais que fait la police, non la dll?? As-tu tenté Exécuter l'exe en tant qu'Administrateur sous win7? clic droit Exécuter en tant qu'Administrateur?
    Luc Desruelle | Voir mon profil | LabVIEW Code & blog
    Co-auteur livre LabVIEW : Programmation et applications
    CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
    CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

  • Application développée sur Labwindows 2009 (9.1.0) fonctionne sur Windows XP et pas sur Windows 7

    Bonjour à tous,
    J'ai développé une application sur Windows CVI 2009 (9.1.0) qui fonctionne sur Windows XP parfaitement, qui s'installe et se lance sur cet OS mais qui ne fonctionne pas sur Windows 7 32.
    Le fonctionnement est le suivant, avec le kit d'installation créé sur Windows XP (mon PC de développement), l'application s'installe. Par contre, une fois que l'on veut l'exécuter, rien ne se passe.... Pas de lancement de l'UIR, pourtant présente sur le PC. De plus, l'application est lancée car elle apparait dans la liste des processus et consomme de la mémoire.
    J'ai déjà fait cette démarche pour des petites application de test très simple (1 seul panel) et tout marchait parfaitement, l'UIR se lançait bien.
    Merci d'avance si vous avez une idée du problème ou simplement une piste de réflexion...
    Bonne journée!
    PS: Message déjà posté dans la section Labwindows du forum, je le reposte au sein de la communauté française de NI
    Résolu !
    Accéder à la solution.

    Mais que fait la police, non la dll?? As-tu tenté Exécuter l'exe en tant qu'Administrateur sous win7? clic droit Exécuter en tant qu'Administrateur?
    Luc Desruelle | Voir mon profil | LabVIEW Code & blog
    Co-auteur livre LabVIEW : Programmation et applications
    CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
    CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

  • Impossible d'installer Photoshop elements 12 sur windows 8.1

    Apres 3 tentatives d'installation de Photoshop Elements 12 sur Windows 8.1, des que j'ouvre l'Organizer celui ci s'arrete subitement de fonctionner

    Please try out the instructions mentioned on page:
    http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
    and see if it helps.
    Thanks,
    Anwesha

  • Installation sur windows 7 error fatal vc90_crt_x86 installation to stoped exit 7

    installion sur windows 7 error fatal vc90_crt_x86, installation to stoped exit 7.le audition is compatible with windows 7????

    What version of Adobe Audition?

  • Puis-je installer CS5 pour Windows sur mon nouveau Mac OS

    Bonjour
    Je me demande s'il est possible d'installer ma license de Photoshop CS5 que j'avais achetée pour mon PC sur windows sur mon nouvel ordinateur Mac OS 10 Lion. 
    Merci de votre aide

    Non
    Licences Creative Suite sont système d'exploitation spécifique.
    Windows uniquement ou Mac uniquement.

  • Minisap installation problem on windows 7

    Hello all... I am new to the software field and I want to learn sap.
    I bought the book ABAP OBJECTS by Horst & Keller, which came with 2 cds.
    I was unable to complete the installation because of the following error..
    info: INSTGUI.EXE
    Protocol version is 10.
    Message checksum is 5737383.
    Info: INSTGUI MessageFile
    Start message loading...
    Info: INSTGUI MessageFile
    Finished message loading.
    Info: InstController Prepare {} {}
    R3SETUP Version: Nov 20 2000
    Info: InstController Prepare {} {}
    Logfile will be set to C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log
        Check C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log for further messages.
    Info: CommandFileController SyFileVersionSave {} {}
    Saving original content of file C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.r3s ...
    Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
    The CD KERNEL will not be copied.
    Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
    The CD DATA will not be copied.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    *Error: CALCRAM_NT_MSS ColdKeyCheck 2 178*
    *Phase failed.*
    *Error: Main {} 2 178*
    *Installation aborted.*
    Is it possible for installing it on windows7??? Please help me out here.. thank you in advance...

    Dear satya
    You can install minisap on win 7. Its better to follow this guide.
    use
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/25006
    and
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20390
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20467
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20668
    SIMPLE OVERVIEW
    SAP NetWeaver 7.02 ABAP Developer Edition System Requirements:
    JRE 1.4.2.x or 1.5.0.x for Installation
    Operating System:
    Windows 7 Professional or Windows Server 2008R2 (english)
    Hostname must not exceed 13 characters
    NTFS-File systems
    Internet Explorer 6.0 or higher or Firefox 1.0 or higher (newest recommended)
    At least 2 GB RAM (recommended 4-8 GB)
    Intel Pentium III/1.1 GHz or higher (or compatible)
    50 GB hard disk space temporary during installation - 36 GB permanent
    High-resolution monitor (1024x768 or higher, 256 colors)
    Make sure that no other SAP system is installed on your computer
    The SAP system requires serveral ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600 and 8000. A possible entry can be excluded by using the hash symbol (#).
    If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. The procedure to install a loopback adapter is documented within the download package.
    regars
    priyanshann
    Edited by: priyanshann on Feb 5, 2012 11:06 AM

  • Installer Labview sur un analyseur de fréquence

    Bonjour, je souhaiterais utiliser mon programme fait avec Labiew, directement sur l'analyseur de fréquence qui marche sous XP. Est il possible d'installer Labview sur mon appareil, et ensuite le piloter directement? Pour l'instant j'utilise la fonction visa ressource name pour le pilote via usb, Comment faire si je le fais directement de l'analyseur?
    Si une personne a déja effectuer cette méthode, je suis preneur d'idée!
    Merci d'avance
    Résolu !
    Accéder à la solution.

    - L'installation sur l'OS Windows est possible, maintenant je pense que si vous n'avez pas d'écrans à brancher sur votre appareil je ne vois pas comment installer le logiciel.
    Le N9020A possède des entrées USB (Branchement clavier et souris) ainsi qu'un lecteur de DVD-ROM/CD-R/RW. Il ne vous faut plus qu'un ecran pour visualiser votre bureau windows et l'installation de LabVIEW devient possible.
    Vous devrez faire attention à la licence NI LabVIEW car si celle-ci ne gère qu'un poste vous ne pourrez pas la faire fonctionner en même temp que celle de votre PC.
    Brice S.
    National Instruments France

  • Peut-on installer labview sur un disque de démarrage?

    Bonjour,
    J'ai une licence labVIEW 8.5 pour Windows. Je souhaiter créer une clé USB portable telle qu'on pourrait avoir avec BartPE ou WinPE. Avec ces outils chargés en mémoire il est possible d'ajouter ou de supprimer des applications.
    Ma question est:
    Est il possible possible d'installer LabVIEW sur un windows portable?.
    Si ce n'est pas possible, est il possible de l'intégrer sur un outil tel que PortableApps ou LiberKey?
    Merci

    Bonjour
    bebop53,
    Votre
    version de LabVIEW ne peut-être installée sur un Windows portable.
    Il existe
    des  solutions pour développer des
    applications LabVIEW sur des OS comme Windows CE en utilisant le Module LabVIEW Mobile.
    Je vous
    invite à contacter les conseillers avant ventes de chez NI au 01 57 66 24 24,
    qui pourront vous conseiller sur les solutions « portable ».
    Le support
    des 2 outils que vous citez n'est pas reconnu par NI, il y a donc de forte
    chance d'incompatibilité
    Cordialement,
    Cedric F.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Quels que soient votre profil et votre région, vous trouverez la journée qui vous correspond !

  • After connecting a Hanns.G HL269 monitor to my MacBook air  I Installation Guide for windows 7. Where do I find installation guide for Mac? ?

    After connecting a Hanns.G HL269 monitor to my MacBook air I entered the disc for the Installation Guide for windows 7 that came with the monitor. Where canI obtain the installation guide for a Mac?

    Those are two Q&A steps from the manufacturer's website. The first one indicating that the "driver" CD is not necessary. The second one is worth following to make sure the monitor is behaving properly. In addition you can go into System Preferences > Displays and then the Arrangement tab to see if the monitor responses from there.

  • 10g R2 Client Installation Problem on Windows 2003 64 bit itanium

    Hi,
    When I click on the setup.exe, i am getting the following..and not getting setup screen
    Using paramFile: E:\oracle_client\10g_winIA_client_102010\client\install\oraparam.ini
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    The commandline for unzip:
    E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
    The commandline for unzip:
    E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
    The commandline for unzip:
    E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
    The number of files bootstrapped for the jre is 528.
    The number of files bootstrapped for the oui is 98.
    what might be the problem, is this due to not having unzip software in the server.
    Please help me

    Just check this link:
    Oracle Installer crashes in Windows XP attempting to install 10g database
    May be useful...
    Amardeep Sidhu
    http://www.amardeepsidhu.com

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • Photosmart C4795 installation error on Windows 7 64 bits

    Dear experts,
    I have been facing an annoying issue while installing HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver I recently donwloaded from HP website.
    During the installation process, the window suddenly closes when "applying updates". No error message is shown or anything that could tell us what went wrong, it just disappears from my screen.
    I've found the following post with the exact issue as mine but different product. I tried that solution but it did not work at all for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...
    I hope someone can give me a tip because I am really out of options here.
    I appreciate any help.
    Thanks,
    Ricardo
    This question was solved.
    View Solution.

    Hello Ricardo,
    lease try following these steps and let me know the results:
    Launch the installation and follow the steps till the EULA (License Agreement) screen.
    Click the 2nd link - Internet Connection Usage Settings and select No, Thanks for both of the listed questions.
    Confirm the selection, accept the EULA and continue the installation which should no\w proceed further.
    Plese let me know if that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • Mac App Store app does not install. How do I get a refund?

    I purchased an app from the Mac App Store (Connect360 - $20).  I "installed" the app from the Mac App Store.  The app appears on the dock and loads, but when it's done, it disappears from the dock.  The app is not located in the Applicaitons menu lik

  • Partner S is not defined

    Hi. I need to create a new partner function but link it to a position ( type S). When I select the "S" in the dropdown and enter, it comes up with the following error message: "Partner S not defined". Is there config or table entries that i have to m

  • Itunes wont launch,(Please install Apple Application Support)

    Itunes won't launch, Get Please Install Apple Application Support, Quicktime won't launch too.

  • Compare date ranges in two tables

    Hello, I'm trying to figure out a way of comparing the range of dates between two date columns from a single row in one table, to the range of dates from multiple rows in a related table. t1 (t1_id, absent_start_date, absent_stop_date) t2 (t2_id, t1_

  • Cleaning up scanned document

    I've got a PDF file that came from a scanned book. Bookmarks have been added, but no OCR performed. The pages are huge (I'm guessing about 100cm x 150cm as I don't know how to check). Acrobat 9 Pro can't do OCR as the pages are too big (see, I told y