Installed 10.5.2 over Tiger cant mount server ?

Hi All
Ok installed Panther............
Now when i connect to my server (OSX 10.4.11) i cant see it on my desktop only can access it via the finder. Any one got any ideas
Cheers
Hammers1966

dont worry, it was me being stupid, forgot about telling the finder to show servers on desktop
Thanks

Similar Messages

Can I install Snow Leopard directly over Tiger?

Running iMac 7,1 on Tiger (10.4.11). Have 1 GB RAM and a 2 GHz Intel Core 2 Duo processor. Can I install Snow Leopard
directly over Tiger?

Yes, you will be upgrading your system, take a look at this link, http://support.apple.com/kb/HT4949

Install 10.6.8 over Tiger Intel to Continue Using Sophos

I am currently using Sophos for Mac Free Edition 8.0.21C on my iMac Ma200LL/A Core Duo 2gigs, 2gigs of ram. As of April 2014 Sophos will only support 10.6.8 + above with version 9. No new virus definitions will be available, but I can continue to scan my computer for existing definitions. I still enjoy using Tiger Intel, fulfills all my requirements, runs very fast on my iMac Core Duo. As an alternative shall I think about using ClamXav 2.2.1 the last version for Tiger Intel that still offers the newest virus definitions as well as current system scanning. I think Sophos is the best because of its reputation in the enterprise sector. Or might it be time to install 10.6.8 over Tiger Intel, then continue using Sophos to be optimally safe on the internet? Thanks, Ken.

Ken Kline wrote:
I shall continue to use Tiger Intel with ClamXav 2.2.1 as long as support for Tiger Intel continues.
I guess I'm a bit confused by what you mean by support.
I'm sure you realize that Apple hasn't supported it since Sep 2009 and there won't be any software updates beyond ClamXav 2.2.1. The scan engine will continue to work and could possibly be updated by you with some degree of difficulty. The signature updates are the only thing that will continue and there are even plans to improve the OS X coverage that is TBD. The only danger is that the ClamAV® folks did disable engine 0.94 back in 2009 with no warning, so hopefully that won't happen again.

Installing Leo over Tiger: is this wise?

hi guys
wondering whether there have been good successes of installing Leo over Tiger. What would be the best approach to do this so all my system info isn't lost in the upgrade?
cheers and appreciate any advice
ab

Hi
Just done this on 24 macs (including a server). Mixture of MacBooks and iMac Aluminiums. A MacPro as the Server. All 10.4.10. Straight forward upgrade to 10.5.1 for the clients using NetBoot and then upgraded to 10.5.4. Apart from one iMac which had drive/directory problems all working fine.
However this was in an office environment - Word, Mail and some low level database work. In a Design Studio environment I would have archived/installed followed by an application reinstall where needed.
Tony

Installing New Microsoft Office Over Old?

I bought Microsoft Office 2008 which I want to install on my external HD which is running Tiger. But on my old internal HD I was running Office 2001. I thought I'd have to re-install that Office onto my new HD but that didn't seem to work. When I open the alias of my old HD and try to open Word documents I get the warning that Microsoft can't open shared libraries and to either open virtual memory or re-install. What's weird is when I first opened a doc just now, it did open into Text Edit, although it had a W at the top like it was Word. But when I tried a second doc, then I got the warning again. Maybe because the 2001 Office is old is why it's not working properly? Or, if I install the new Office onto Tiger, will it over-ride the older one? Do I need to un-install the old Office? I don't want to do anything without asking, first. Thanks for any reply.

When you use Classic, Tiger starts up a pretend version of OS9 using the version of OS9 you have told it to use as Classic.
I have on my computer this set up:
Hard drive 1: OS9
Hard drive 2: Tiger, OS9
When I want to boot to OS9 I select the version of OS9 on drive 1. It has a lot of extras in it that won't help when using OS9 as Classic.
When I want to run an OS9 generation program inside Classic when booted from Tiger I have it set so Tiger uses the copy of OS9 on drive 2. This copy does not have plug-ins in it required by certain programs I use only when actually fully booted to OS9. Those programs would protest if I tried to use them from inside Classic because they could not find those components.
I don't know if you have a similar setup. If you did, it would explain why Office 2001 does not work in Tiger's Classic but does when booted to OS9 which is actually a different copy of OS9.
Since I also have the older Word documents on CDs, will they open into the newer Word after it's been installed and I insert the CDs? Or would I be able to just drag them from the OS 9 folder and onto the desktop and then into the new (Tiger) folder?
They should just work with the new version of Word wherever they are located. You don't need to move them. The only problem with having them on CDs is you won't be able to save changes.

Install iTunes 10.7 over iTunes 11?

greetings,
my question is:
how does one install iTunes 10.7 over iTunes 11 if one has iTunes 10.7.dmg?
here's where i am now:
this mac has OSX 10.7.5. i tried iTunes 11 a month ago on an older mac that i'm getting rid of. it has a bad bug and doesn't work right with my 120Gig iPod. so i can't use it. haven't had time to report the bug yet, but it's on my list to do...
somehow iTunes 11 showed up on my work MBPro yesterday without running software updater. i always decline installing iTunes 11. i used iTunes 10.7 tues night. and last night (wed) when i plugged in my iPod, i got the new software license screen "accept/decline" etc. i checked get info on iTunes in /Applications, and sure enough, it shows version 11.0.1 and a modificaiton date of wed morning (?). i was in meetings most of the day and software NEVER ran... but i digress...
regardless of how this happened, i'm trying to fix this and reinstall the previous version...
i found and downloaded iTunes 10.7 installer on apple's website. but when i run the installer, i get a message "iTunes can't be installed on this computer because a newer version is already installed"... never seen this before...
so i tried deleted iTunes 11.0.1, and get a message "iTunes can't be modifed or deleted because it is required by OSX"! ??
i've never seen this before either.
so i assumed i need to boot from an external drive so that i can delete iTunes... we have no "boot" dvd anymore. but i have an exteral drive with the complete OS and various utilites so that i can boot from an external disc in case i can't boot from the internal drive or need to run a utility like diskwarrior... but my company has forced a third party disc encryption software. so this prevents me from mounting the internal drive when i've booted from my external drive. there goes all of my repair and recovery tools, but i digress...
this is a new MBPro. it took me forever to configure and get software installed because of the shenanigans of the companies IT department and the lack of physical media from Apple and other software vendors. i just finished the same day i had to leave on a trip.
so i'm trying to figure out how to install iTunes 10.7 if iTunes 11 is already installed.
i'd appreciate any suggestions.

ok, found a way to delete iTunes from terminal
sudo -rf /Applications/iTunes
then i can run the installer for iTunes 10.7...

Cant mount /var at boot

I am experiencing problem with our v480 server, as ocasionally it fails to boot and gives cant mount /var error and goes into single user mode. (Log file is attached below). Once this happens, it doesnt come back into runlevel 3 until it is completely powered off and on.
I fixed the (ufs log for / changed state to Error ) message by removing the patch 113073-14 and making / as nologging in /etc/vfstab file. But the problem with not mounting /var still comes up. I am attaching the log file below with the ufslog error message included (which doesnt show up after patch removal).
I am looking for any suggestions or hints, what would be causing this. Thanks a lot.
Sun Fire 480R, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.0, 4096 MB memory installed, Serial ##
Creating CPU memory layout properties.
Initializing 1MB of memory at addr a0ffb92000 - Initializing 12MB of memory at addr a0ff002000 - Initializing 16MB of memory at addr a0fe002000 - Initializing 4064MB of memory at addr a000000000 \ | / - \ | / - Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
Environmental monitor is ON
Rebooting with command: boot
Boot device: disk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Sun-Fire-480R/ufsboot
Loading: /platform/sun4u/ufsboot
| / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ SunOS Release 5.9 Version Generic_117171-12 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
| / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <0>
Can't find clone devinfo node
jnic146x0: Hba: JNI,FCR Model: FCE-6460-N
jnic146x0: FCode: Version 3.9 [3505]
jnic146x0: IRQ: 1 Channel: 1
jnic146x0: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
jnic146x0: WWNN: 100000017301494A WWPN: 200000017301494A
jnic146x0: Auto-negotiating link speed
jnic146x0: Configured as Fabric port
jnic146x0: JNIC v5.2.1.HIT.M05 (03082100)
jnic146x0: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
jnic146x0: Link Up: 2Gig
jnic146x0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
jnic146x0: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
jnic146x0: Network Port FFFC01 (WWN 100000051E341635:20FD00051E341635) available.
WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <1>
Can't find clone devinfo node
jnic146x1: Hba: JNI,FCR Model: FCE-6460-N
jnic146x1: FCode: Version 3.9 [3505]
jnic146x1: IRQ: 1 Channel: 1
jnic146x1: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
jnic146x1: WWNN: 10000001730146A9 WWPN: 20000001730146A9
jnic146x1: Auto-negotiating link speed
jnic146x1: Configured as Fabric port
jnic146x1: JNIC v5.2.1.HIT.M05 (03082100)
jnic146x1: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
jnic146x1: Link Up: 2Gig
jnic146x1: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
jnic146x1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
jnic146x1: Network Port FFFC01 (WWN 100000051E344E7D:20FD00051E344E7D) available.
jnic146x0: Target0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
jnic146x0: Target1: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
jnic146x1: Target0: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
jnic146x1: Target1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
jnic146x0: Target0: Lun0 present.
jnic146x1: Target0: Lun0 present.
jnic146x0: Target0: Lun1 present.
jnic146x1: Target0: Lun1 present.
jnic146x0: Target0: Lun2 present.
jnic146x1: Target0: Lun2 present.
jnic146x0: Target0: Lun3 present.
jnic146x1: Target0: Lun3 present.
jnic146x0: Target0: Lun4 present.
jnic146x1: Target0: Lun4 present.
jnic146x0: Target1: Lun0 present.
jnic146x1: Target1: Lun0 present.
jnic146x0: Target1: Lun1 present.
jnic146x1: Target1: Lun1 present.
jnic146x0: Target1: Lun2 present.
jnic146x1: Target1: Lun2 present.
jnic146x0: Target1: Lun3 present.
jnic146x1: Target1: Lun3 present.
jnic146x0: Target1: Lun4 present.
jnic146x1: Target1: Lun4 present.
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run fsck(1M)
VxVM sysboot INFO V-5-2-3390 Starting restore daemon...
VxVM sysboot INFO V-5-2-3409 starting in boot mode...
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
NOTICE: VxVM vxdmp V-5-0-34 added disk array D6001A6B, datype = HDS9500V
configuring IPv4 interfaces: ce0 ce1.
Hostname: beta23
VxVM INFO V-5-2-3247 starting special volumes ( swapvol rootvol usr var opt )...
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
mount: /dev/vx/dsk/bootdg/var is already mounted, /var is busy,
or the allowable number of mount points has been exceeded
mount: mount-point /var/run does not exist.
VxVM vxvm-startup2 INFO V-5-2-503 VxVM general startup...
Dec 13 22:09:04 vxvm:vxconfigd: V-5-1-1589 enable failed: Error in disk group configuration copies
Dec 13 22:09:04 vxvm:vxconfigd: Database file not found; transactions are disabled.
VxVM vxvm-startup2 ERROR V-5-2-3656 Vold is not enabled for transactions
No volumes started
INIT: Cannot create /var/adm/utmpx
INIT: failed write of utmpx entry:" "
INIT: failed write of utmpx entry:" "
INIT: SINGLE USER MODE

Thank you so much for your response.
This error doesnt occur in all boots, but once it occurs , we have to power off the machine and power back on and machine boots normally into run level 3 without this /var error. otherwise a simple reboot doesnt help and we get the same error.
Here is the /etc/vfstab file, may be you can suggest further.
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/vx/dsk/bootdg/swapvol - - swap - no -
/dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no nologging
/dev/vx/dsk/bootdg/usr /dev/vx/rdsk/bootdg/usr /usr ufs 1 no -
/dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no -
/dev/vx/dsk/bootdg/opt /dev/vx/rdsk/bootdg/opt /opt ufs 2 yes -
swap - /tmp tmpfs - yes -
#/dev/odm added for support of Oracle access to VxFS
/dev/odm - /dev/odm odm - no -
#NOTE: volume rootvol (/) encapsulated partition c0t0d0s0
#NOTE: volume swapvol (swap) encapsulated partition c0t0d0s1
#NOTE: volume usr (/usr) encapsulated partition c0t0d0s3
#NOTE: volume var (/var) encapsulated partition c0t0d0s4
#NOTE: volume opt (/opt) encapsulated partition c0t0d0s5
/dev/vx/dsk/dxdbdg/u01 /dev/vx/rdsk/dxdbdg/u01 /u01 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u02 /dev/vx/rdsk/dxdbdg/u02 /u02 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u04 /dev/vx/rdsk/dxdbdg/u04 /u04 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u05 /dev/vx/rdsk/dxdbdg/u05 /u05 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u06 /dev/vx/rdsk/dxdbdg/u06 /u06 vxfs - yes suid
Thanks again

Cant mount /dev/sda2 /mnt

hello,everybody
I'm a beginner
I want to install ArchLinux in my Dell notebook ,the sda1 had installed window xp,i want to make a dual system .
I burn a Arch Linux ISO cd and enter the live system,then the questions are coming....
After partitioning the drive by cfdisk tool,i cant mount the sda2 on the /mnt
the error code list this :
SQUASHFS error: Cant find a SQUASHFS superblock on sda2
EXT4-fs(sda2) : cant find ext4 filesystem
What's meaning ? I have partition the drive like this .Please other Linuxer help me or tell me how to solve this problem
cfdisk
name flags partType fsType size(MB)
sda1 Primary ntfs 30000
sda2 Boot Primary Linux 100
sda3 Primary Linux 10000
sda5 Logical Linux swap 2000
sda6 Logical Linux 70000

After you partitioned the drive, did you put filesystems on the partitions? Follow the steps in the Beginners' Guide, and use mkfs to put filesystems on the partitions. If sda2 is your boot partition, it's not the partition you want to mount at /mnt (you should mount your root partition there). Read the Guide.
https://wiki.archlinux.org/index.php/Beginners'_Guide
Last edited by 2ManyDogs (2012-12-16 04:48:46)

Can i install windows 8.1 over xp in bootcamp

Can I install windows 8.1 over xp in bootcamp?

Is it on the system drive? on its own drive or is it large enough?
Windows 8.1 will run even without Apple's drivers just fine except for a couple items.
Boot Camp forum probably is best place.
Boot Camp is software (and a forum) as in drivers and Boot Camp Assistant.
You have to do a "custom" clean install, you can't upgrade from within XP, you should of course be using 64-bit and Pro for supporting two cpus.

I installed adobe flash 13 and i cant watch any videos i uninstalled it installed it and the f-ing adobe pagesays its missing a plug in and im looking at the plugins and lo and behold its plugged in and i downloaded mavericks about a week ago the funny th

installed adobe flash 13 and i cant watch any videos i uninstalled it installed it and the f-ing adobe pagesays its missing a plug in and im looking at the plugins and lo and behold its plugged in and i downloaded mavericks about a week ago the funny thing the game i play on a igg website works just fine but when i want to watch a video it plays 18 secs and quits

You may need to revert to a prior version of Flash > Adobe Community: ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

Cant mount ntfs drive in os x 10.8.4

I've tried with several drives and bought software but still cant mount a pc hdd.
Needed strongly to work.

NTFS is a windows format, not Mac. You will have to reformat it to ExFat on a PC or use software such as this:
http://www.paragon-software.com/home/ntfs-mac/
Ciao.
Note that these are recommendations for use as an external HDD.
Message was edited by: OGELTHORPE

Able to install Acrobat 9.1 over the pre-release build

I am able to install Acrobat 9.1 over the pre-release build, however, the release notes say otherwise i.e. to un-install the pre-release build before installing the 9.1 release. Let me know whether to log a bug for the same.

I do not have posting privileges on that forum. I did use the forum to send a message to Apple but have not got a reply yet.

How do I install LabVIEW 6.0 over the evaluation version? I can't un-install the evaluation version.

I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?

I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
>

Installing EP & PI over an existing ECC server

Hi Guys
We have already installed the ERP package (ECC) and we have enough memory and diskspace on the server and there we are considering installing EP or PI over the existing server so that we can use both ECC and EP (or PI).
How can we do this? What are the steps to do it? I want to make sure that we don't corrupt the existing SAP stuff on the server, but just want to install enterprise portal (Or and XI).
Your comments or suggestions will be highly appreciated.
Thanks
Ram

Hi ram,
PI requires both Java and ABAP stack.
EP requires only Java stack.
In any implementation for EP, EP requires a restart many times after doing configuration changes. Then it will affect your PI installation too.
It is not advisable to install both on same server.
regards,
Piyush

I am trying to install Lion OS X over Mac OS X Snow Leopard 10.6.8

I am trying to install Lion OS X over Mac OS X Snow Leopard 10.6.8
I get an error message: "There are currently other logged in users who must be logged out before you install Mac OS X".
I switch to log out other users and deleted everyone listed. It still says: ....
There is no one else left. I don't know what to do now.
Bill

I don't know what you mean by "I switch to log out other users and deleted everyone listed" -- if other user accounts are on your Mac you just need to log them out, not delete anything -- but it may be that there are other user accounts you aren't aware of on the Mac.
Are you an admin user? Did you originally set up this Mac?

Installed 10.5.2 over Tiger cant mount server ?

Similar Messages

Maybe you are looking for