Installed 2 new network printers and can't see old network printer

I installed an Hp2055dn(wired) and an HP Officejet 6000 e609n(wireless) this week for a group of classrooms to share in an elementary school. They work perfectly. My problem seems to be that another printer, HP 2600n(wired), has disappeared from the network and can't be seen by any computers on the wireless network. It still can print from our wired computer lab though. I'm assuming there must be a conflict somewhere but am at a loss to start to figure it out. Any help is greatly appreciated. Thanks!!!!!!!!!!!

Hello, and welcome to the Discussions.
It sounds as though you may not have gotten Aperture updated to version 2.1.4, which is required to work in Snow Leopard. There are numerous topics about updating to 2.1.4 after attempting to run an earlier version in SL Read some of those:
http://discussions.apple.com/thread.jspa?messageID=10578088&#10578088
http://discussions.apple.com/thread.jspa?messageID=10840115&#10840115
http://discussions.apple.com/thread.jspa?messageID=10737633&#10737633
Having updated to 2.1.4 while running Leopard, and before Upgrading to Snow Leopard, I cannot provide a clear path to what to purge in order to get the update done in SL, if you find all is correct regarding the location of the application, etc. Removing Aperture and installing again, but running Software Update before ever launching Aperture may work, and downloading the current trial version (which is 2.1.4) and then applying the Serial number of the package you bought will also work.
Ernie

Similar Messages

I have an iphone 4s and have installed the new ios download and can no longer find games and other apps that i have downloaded. Where would they be or have they been wiped?

I have an iphone 4s and have installed the new ios download and can no longer find games and other apps that i have downloaded. Where would they be or have they been wiped?

Hi,
don´t be worry, this would not be a problem.
You have to take the same Aplle ID on both devices, then you can sync them via iTunes by using all universal apps on each device, create playlists, albums and all the things you need and sync it, no problem...
cu
dienoppe

I'm new to icloud and can't see the value. where is a good place to go to find out how to use it? also how can you restore the backup of original files.

I am new to icloud. where can a I go to learn how to restore backup to my PC?

See Here...
iCloud Backup and Restore Overview
http://support.apple.com/kb/HT4859?viewlocale=en_US
And Here...
iCloud Help
http://help.apple.com/icloud/?lang=en

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

I've installed PScs on my new windows 7 and can't activate

I've installed PScs on my new windows 7 and can't activate. Any suggestions?

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

HT2404 my hard drive crashed and nothing recoverable. Apple installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

My hard drive crashed and nothing recoverable, local Apple Store installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
Read how to format the drive in Disk Utility here
https://discussions.apple.com/docs/DOC-3044
How to install OS X
https://discussions.apple.com/docs/DOC-3251
Software Update fully,
Hold the option key and click on Purchases when in MAS to download your 10.7 etc.

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password.

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password. I want to start over and I can't even get back in to do this bc it won't take any of my passwords. How can I start over completely?

You got a new laptop? try asking there or in Lion forum.
If it has Lion, use the Recovery Mode boot Command-R
Use that to erase and reinstall - it has network install ability.
Want MacBook Pro forum or Lion Community?
MacBook Pro
Lion Mac OS X Communities
New, as in from Apple, it would have asked for full setup.
Want to reset the password? (it is used then I'd wipe it clean and start over)
How to run the Password Reset utility in OS X 10.7 Lion

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black. MAY YOU HELP ME PLEASE???

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DO

carter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.

HT1477 I am trying to install a new iPod Shuffle and my pc does not pick it up. My pc is running windows 8.1 os. I do not see that os in the list of operating systems.

I am trying to install a new iPod Shuffle and my pc does not pick it up.
My operating system is Windows 8.1 and windows 8 does not appear
in the list of operating systems.

You are referring to OFFICE 2010, not Windows XP or 7.
And which version of Windows do you have?
NEVER begin before you have a backup, ideally one you have tested and know works.
You don't really install Boot Camp, the Assistant is a partition tool utility.
You may just want Office 2008 for Mac.
If you need Office for Windows, perhaps run Windows in a VM like Parallels or Fusion.
Buy some backup drives and start using TimeMachine for one backup, then weekly backup with SuperDuper.
IF there is now a partition for Windows, all you need is to buy Windows, and I would recommend Windows 7 Home Premium (retail) which is about US$149.
Has nothing to do with free space. Office 2010 isn't to boot from. In fact, you can copy the disc to a folder (1.25GB) and run SETUP from there.

When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?

When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?
Thanks
James A+, Network+, MCP

If the program settings are set to hidden, it should be hidden. You do not need to specify any client settings. If you changed the program settings and the machines already had policy, you will have to wait up to your 60 minute policy setting or just manually
kick off a policy update to see the new hidden program.
If they are still getting the interactive install, then you need to troubleshoot if the machine has gotten proper policy. Run a 'Machine policy retrieval and evaluation cycle' manually, wait a few minutes and then test again.
Suppress program notifications are the tray icons and bubble notifications about installations happening. Hidden is the method in which the executable/msi will install.
Daniel Ratliff | http://www.PotentEngineer.com |
@PotentEngineer

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I prin e-mails using iPad 3

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I print e-mails? Thanks.

In the email you want to print, on the top right there is an arrow. Click that and an option should appear that says print. That should work. Have you already tried that?

I recently installed a new hard drive and don't know how to install the software.

I recently installed a new hard drive and now when I turn it on, it just shows a blinking file with a question mark on it. What do I do now? How do I install the software if I can't get on the internet from my MacBook? Can the apple store do it for me?

Which operating system version did you have?
We also need to know which exact model Mac (almost always include this information when you post - saying MaBookPro is almost as bad as saying "Ford car" in terms of the variety of submodels) because some newer models can boot from the Internet.
OS X: About OS X Recovery - http://support.apple.com/kb/HT4718 - "OS X Lion, Mountain Lion, and Mavericks include OS X Recovery. This feature includes all of the tools you need to reinstall OS X, repair your disk, and even restore from a Time Machine backup without the need for optical discs."

Installed 2 new network printers and can't see old network printer

Similar Messages

Maybe you are looking for