Installed 3 tb TC to replace 1 tb TC. wish to copy old TC to new TC. how?

Installed 3tb Time Cap to replace 1 tb TC. Wish to copy from old to new. Apple's instructions fail me. Any ideas?

First thing is to get the networking correct.
Either one Time Capsule is router and the other bridged, or both are bridged. They should be plugged into each other by ethernet.
Do not use wireless.. it will take forever as it is. Wireless anywhere in the link.. TC to TC to computer is going to kill it.
Copying must be all ethernet.. and all gigabit, because all packets are going to be copied to the computer and then back to the other TC.
Then follow pondini's instructions.
Q18 here. http://pondini.org/TM/FAQ.html
IMHO you are far better off, starting a new TM backup on the new TC.
You can archive off the backups on the existing 1TB TC to a USB drive. Keep it in a draw for 1year.. you will be highly unlikely to ever require it after that. Then erase the older TC.

Similar Messages

I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??

I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial #. How can I get it to allow me to continue using my software?

If you had registered your CS3, you can get the serial number from your Adobe account when you log in through the Adobe corporate web site. Just go to My Products to find it in your account.
Adobe applications show you a truncated s/n to discourage software piracy. Legitimate Adobe s/ns have 24 digits.

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a copy but I have seen no way to get it.

If you registered your Lightroom with Adobe after you installed it, you can log into your Adobe account and get your serial number from your account.

Help! Bought a used iMac (2008) and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot. How do I retrieve or reset the password?

Can anyone help...
I just bought a used iMac (2008) from an ebay seller and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot.
How do I retrieve or reset the password?
It came with the upgrade of Mountain Lion but I cannot find quicktime in the applications. When I try to install anything this Installer Password thing comes up... so I'm stuck.

ShirlFromNC
I think you're slightly misunderstanding something, so maybe I'll try to chime in, even though everyone has said it in various ways.
Before OSX 10.7 (aka Lion) came out, the upgrades to OSX belonged to the Mac and not the user. Probably there was a technical legality in the user agreement that you couldn't do that, but everyone did. I could sell a Mac with Snow Leopard (or anything before that) by just erasing the hard drive, and reinstalling OSX. Then ship it to the buyer. Now, I was pretty honest as a seller, and including not only the original installation discs but also any upgrade. I would only sell a Mac if I was replacing it, so I always was getting the brand new version.
With OSX 10.7, upgrading was done online, with no disks. So the upgrades were tied to an Apple ID rather than the machine. Recently, I sold a MacBook Pro (to upgrade to a 27" iMac), which came with Lion. I had promised the buyer that it would come with Mountain Lion, but I didn't know that the upgrade was tied to my Apple ID. I made good with the buyer by sending along a $20 Apple App Store card so that she could upgrade to Lion.
So what everyone is saying here is that you need the original Installation discs or Snow Leopard disk to reinstall and wipe out the Mountain Lion that is on your Mac. It doesn't belong to you, it belongs to the seller, and without his Apple ID and password, you cannot use it. Once you do a reinstall of Snow Leopard, then you can upgrade to Lion and then to Mountain Lion. I do not believe you can upgrade directly to Mountain Lion from Snow Leopard, but I'm not sure.
If the seller claimed that you were getting Mountain Lion, then he was lying to you (or being more civil, maybe he just didn't know like I did). If you bought the used machine from Amazon Sellers or from eBay, then you have recourse through the feedback system or through PayPal. If you bought it any other way, you're on your own.

Can I swap out old RAM with new before install of new HD?

I am replacing a friend's HD for her MacBook Pro 5,2 and also swapping out the old memory (2-2GBs) for new memory (2-4 GBs). My question is: does it matter whether I install the new memory before I install the HD or after? If after, does it matter whether or not the HD has been formatted? Has an OS installed on it? Any help here would be very much appreciated!

Your snow leopard dvd will format the HD properly to install the OS. Just replace the HD put in the snow leopard disc and let it do its thing

What is the meaning, or significance, of the greyed out word "installed" next to the iBooks app icon in the iTunes list of apps on my new iPhone6, or slightly older iPad mini, retina display?

What is the meaning, or significance, of the greyed out word “installed” next to the iBooks app icon in the iTunes lists of apps on my new iPhone6, or slightly older iPad mini, retina display? Both devices have iOS8.0.2 installed. Both are having problems downloading some books that had been purchased previously for other devices. And, before installing iOS8, the full list of had been downloaded to the iPad mini with iOS7.
Finding out what the greyed outness means may help me figure out how to get all my books loaded on both devices. Any suggestions how to do that also would be appreciated.

Thank you. Your explanation of why the word "installed" is greyed out makes sense. But that raises the further question of why then is it shown at all. There are other apps on both devices that can not be removed,and they are just not shown. This is the only app that has the greyed out "install" notation. All of the other apps shown are either identified by "remove" meaning it is installed and can be removed; "install" meaning it is not installed but can be; or "update" meaning it has been replaced by a more current version which can be installed.
All of the books that I want to install have been on an iPhone4 that was replaced by the iPhone6, and were on the iPad Mini with iOS7 before iOS8 was installed. Installation of iOS8 on the iPad removed all of the books and only a few of them were later added by syncing with iTunes. Since most of the books I am interested in are free or of small cost, I would be happy to delete all of them from iTunes and then reinstall the ones I want directly on the devices. But I have not been able to delete them and when I try to install them on a device I am told that they already have been downloaded. Very frustrating.

Windows XP (sp2) will not update after replacing the hard disk of my Presario V4435NR with a new one

Hi,
I had to replace my Presario V4435NR hard disk (80 GB) with a new 160 GB hard disk from Samsung. The original hard disk did not crash but was churning all the time and did not have enough space for all I wanted to put on it. I installed the new 160 GB hard disk (which of course did not have the recovery partition that my old one had on it) and ran recovery from the recovery DVD I made when I first bought the laptop. Everything worked fine until I tried to update my xp through windows update website. This is the error # I get from windows updates (0x80072EE2).
How can I get my xp to run updates sealessly as it used to before?
THank you
Abdul

I installed it already and things were fine (updates installed with no problems) for a while but the same problem resurfaced after I installed MS Office. Xp gave me the same error code when I tried to update. Woke up in the morning and tried windows update again and windows found lots of updates and installed them smoothly.
What is causing this inconsistency?
* Now, I'm unable to get any updates (windows updates website gives me the same error code)

I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?

I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?
I got my series number from my Institut (which is in Paris, FR). I do not use Creative Cloud.
When I was installing the software, I cannot select a language.
Could you help me with my problem? Do I have to get a different series number?

lunc,
You will have to get a new application in English, to replace the French one.
You, or your Institute will have to get help from Adobe, I am afraid.
You may try a chat here,
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
or (have your Institute) talk to Adobe in France
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
If you fail to get any help, please report back here, and I will ask a special forum staff friend to try to find the right one at Adobe to have things sorted out.

I installed lightroom 5 with a 30 day trial and it finished. Yesterday I installed cc and when I open LR5 I need a serial number. What do I do/how do I get one? Please help Tank you

I installed lightroom 5 with a 30 day trial and it finished.
Yesterday I installed cc and when I open LR5 I need a serial number.
What do I do/how do I get one?
Please help, Thank you.

Your photos remain in place, the catalog you have been using will remain. After you install Lightroom from the CC, all you have to do is open your existing catalog and continue right where you left off.

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that. If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online. You can also download thru the following page if you can find your version:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can have the first installation deactivated to free up the activation and have it available for another machine again as well. YOu need to contact Adobe Support thru chat for that. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Old Logic + a new Mac = can't open old projects anymore. De/re-install?

Hi everybody,
maybe someone can advise me with this problem:
I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
Regarding all 3 issues:
I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
Or completely re-install the whole Mac? (pleeease no....)...
If anybody has any idea, it'd be highly appreciated.
Thank you in advance and for the energy to read my little novel here,
cheers,
Joern

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

Downloading past purchases from the App Store ... - Support - Apple

I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

Bookmarks and history are stored together in your profile folder in a database file named places.sqlite. These articles should help with restoring as much or as little of your other profile as you like:
Locating the folder: [https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
The following article has suggestions for recovering bookmarks: [http://support.mozilla.com/en-US/kb/Lost%20Bookmarks Lost Bookmarks | Troubleshooting | Firefox Help].
To move more settings, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

Installed 3 tb TC to replace 1 tb TC. wish to copy old TC to new TC. how?

Similar Messages

Maybe you are looking for