Installed 4.01, now no audio for DV files....

HD files taken with my Sony SR-HD12 are fine, but I can no longer hear any audio for any files shot in DV. Anyone else have this issue?

Installing the 4.01 update has been known to reset sequence settings.
Have a look through all your sequence settings and be sure they make sense for your project.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

No sync with audio for input files AVI MPEG4 23.976 fps

No sync with audio for input files AVI MPEG4 23.976 fps.
If i open in Premiere Pro CC any file AVI MPEG4 23.976 fps (with internal audio MP3 or AC3) i got growing out of sync from start to end of file, even while play it at internal media player of Premiere Pro CC for source file.
Using external audio files AC3 or MP3 not help.
In properties of source file i see 23.97 fps instead of 23.976 fps, and time of internal file is wrong.
If i try Clip > Modify > Interpreter Footage > custom settings to 23.976 time i see right time, but when i click "OK", custom fps saved as 23.98 fps instead of 23.976 fps and time of source goes wrong again.
So i always get bad sync such files in Premiere Pro CC while play or export them.
But in all media players, other editors, and in PluralEyes sync OK with all such files.
If i open M2TS or MP4 (H264 23.976 fps) source file, all OK, it it shows as 23.976 fps, time is right, and sync OK.
So i want to add automatic detection 23.976 fps instead of 23.97 fps for source AVI files with 23.976 fps.
Is it possible?

Yes, i know what XviD and DivX does not edit well in Premiere Pro. And because of that i create this topic "No sync with audio for input files AVI MPEG4 23.976 fps" and was hoping to get help in solving the problem, rather than stating that the problem really is.
XviD and DivX it is MPEG4.
Xvid (formerly "XviD") is a video codec library following the MPEG-4 standard, specifically MPEG-4 Part 2 Advanced Simple Profile (ASP).
http://en.wikipedia.org/wiki/Xvid
I have many old useful materials in XviD and DivX formats, and have no other formats versions for that material.
XviD and DivX are very compact formats to store video at acceptable quality and it is fully compatible with all players and editors for PC except Premiere Pro.
You suggest to convert them to another format (DV) to make compatible with Premiere Pro... It is not what i want.
Let me explaine:
1) Size of files
uploaded AVI XviD 1280x720 file with very good quality have size 1.9Gb (with audio AC3 2.0). If i convert it via VirtualDub from "AVI XviD" to AVI DVCPRO HD 1280x720 (without audio) it have size 35Gb, and quality is worst than at XviD-HD, and also converting take much time.
2) Compatibility with AC3 and MP3 audio inside AVI
AVI DV / AVI DVCPRO not compatible with AC3 and MP3 audio inside, only with PCM
http://en.wikipedia.org/wiki/DV
AVI XviD and DivX can use AC3, MP3, OGG audio without any problems.
Size of 1Hour 30Min "AC3 Stereo 48kHz 16bit 384Kbps" file is 257Mb
Size of 1Hour 30Min "PCM Stereo 48kHz 16bit" file is 1030Mb
3) I have and use hardware H264 encoder card "Matrox CompressHD" for export my material
http://www.matrox.com/video/en/products/compresshd/specs/
This card works only from Adobe Premiere Pro, so i can not use it from VirtualDub or other editing software.
So i need a full compatibility Adobe Premiere Pro with all popular standard formats of input files.
Here we see:
http://www.adobe.com/products/premiere/extend.html#Supportedvideoformats
Supported video formats:
"Adobe Premiere Pro CC leads the industry with incredible, thorough native media support, meaning you can edit virtually all of the major video, image, and audio formats natively without waiting."
As most PC users knows, AVI XviD it is a very popular free video format, and would be very useful if Adobe will make normal compatibility with that format in Premiere Pro.

Install iLife 06 now, or wait for my RAM?

I just bought iLIfe 06 and would like to install it onto my Mac right away, but I also just ordered 1 GB of RAM which could take up to 14 days to get here.
I really want to play around with iLife and try out all its fun new features (i'm upgrading from iPhoto 2 and iMovie 3, i don't think these apps were part of iLife back when I got my PB 3 years ago).
Can I install iLife right now (I am running with 384 mb RAM), or do I have to wait until I install my GB of RAM. I know it will run better with the RAM upgrade, but I just want to know if I have to wait to install it until my RAM comes. THANKS for your help!

Memtest is a very thorough memory tester, I'm not surprised it is taking quite a bit longer to test. I like to use the program rember, which wraps a nice graphical interface around the memtest program. Last time I used it, I fired up the test and let it run overnight. With rember (and I would assume native memtest), you can choose verbose logging, so you can watch the results as it tests the memory, or if you put it on multiple iterations overnight, you can read the test log in the morning.
You also have a memory test in your Apple hardware test program. Insert the OS X DVD that came with your system (it will say AHT Version x.x in small print on the DVD), reboot holding the option key down, choose Apple hardware test, and follow directions. When testing memory, choose the extended test.

Install Windows 7 now or wait for Snow Leopard (bootcamp 3?)

What should I do? I just received my RTM copy of Win7 and I'm debating whether or not I should wait for the Snow Leopard release to install it.
I wonder if it will be better supported with bootcamp 3. Any (quick) advice would be greatly appreciated. Thanks!

I definitely agree with Hatter, it was the easiest installation with Bootcamp I've experienced with a Windows OS and I'm currently running Leopard.

No audio for some files in the Final Cut Event/Original Media folder

Hi, recently, I noticed that some of the video files stored into the Final Cut Event/"Event"/Original Media folder had no audio. They do have audio when I read them into FCP X but not when I open them as ordinary files in the Finder. It worries me as it makes these files unusable in any other application, unless I "share" them from FCP X. It's no big deal but it's more work and on the principle, it's criminal: why FCP X would strip the audio off an original? Video and photo applications now work on the non-destructive principle!
I usually shoot videos with a DSLR (Canon 550D/T2i) and a GoPro 3. It seems that the files impacted are the ones shot with the Canon and optimized for FCP X. The GoPro files are fine, optimized or not.
Is there any solution to this problem or will I have to export the files from FCP X?

Thank you very much for the info.
I removed the Media Cache and Media Cache File folders. Didn't seem to make any difference. Also, there's no audio if I try to play it in Organizer.
I have a question regaring "import". What exactly does that mean?
Since all my MTS files are on hard drive already, what I did was:
1) Open a new project in PE9.
2) In the "Organize" tab, click "Get Media"
3) Choose "Get Videos/Photos/Audio from: Files and Folders".
4) In the pop-up window, navigate to my folder and choose the existing MTS file.
Was that called "import"?
Thank you again!
Michael

No audio for MTS files in PE9

I'm running Premiere Element 9 (registered version) on Windows 7 X64.
I have some exsiting MTS files on the hard drive (they are from Canon HF20 camcorder).
If I play those MTS files in Windows Media, everything was fine. I got video and audio.
But when I create a project and put those files in the project, I got video only. There's no audio.
For troubleshooting purpose, I install Premiere Pro (CS5) and VideoStudio (from Corel). Both of them worked fine with audio. So it looks like the problem is specific to Premiere Element only.
I've gone through the thread http://forums.adobe.com/thread/731032?tstart=0. But couldn't fix the problem.
Any hints would be appreciated!
Michael

Thank you very much for the info.
I removed the Media Cache and Media Cache File folders. Didn't seem to make any difference. Also, there's no audio if I try to play it in Organizer.
I have a question regaring "import". What exactly does that mean?
Since all my MTS files are on hard drive already, what I did was:
1) Open a new project in PE9.
2) In the "Organize" tab, click "Get Media"
3) Choose "Get Videos/Photos/Audio from: Files and Folders".
4) In the pop-up window, navigate to my folder and choose the existing MTS file.
Was that called "import"?
Thank you again!
Michael

No audio for avi files in Quicktime

Hi, like many others I'm having difficulty trying to restore audio to avi videos. It seems to be a codec related problem but I'm not sure.
My Quicktime folder contains:
AC3 MovieImport.component
AppleIntermediateCodec.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Perian.component
Is there another codec I need or do I need to delete one or more I already have?
Any help would be much appreciated

But then why has Quicktime played these avi video files with audio in the past? What has happened to the audio data? It's been mentioned by some that problems like this occurred after the 7.5 Quicktime update?
Frankly, I leave that up to you to find out. However, here are the logical options as I see them:
1) The inspector is not seeing any audio because there is none.
1a) If the files never played audio, then it never contained any audio in the first place.
1b) If the files previously played and currently do not, then
1b1) Either you converted or deleted the audio content (check the "Properties" window if you have QT Pro or use either the Finder "Get Info" or another application to re-check for an audio track)
1b2) Updating QT or the addition of another codec has created a component conflict and you will have to run a conflict test to discover where the problem lies. Basically, updating the QT structure or adding a new component can alter the order that the QT Player/QT applications may call components. In some cases the components may "argue" over which component should be used. In other cases, the component being called first may be in conflict with another installed component whereas the previously "first called" component did not. (I.e., see hoodstar's recent "SALVATION" revelation comment regarding the same problem.)

Installed Time Capsule, now want to delete/clean files from mac mini HD, is there an easy way to do this?

I've installed Time Capsule and using Time Machine backed up all my files from my Mac Mini (mid 2010) and verified they're there, now, as nervous as I am to do this, I want to clean/delete all the files on my mac mini hard drive, is there an easier and faster way than just moving to trash and deleting them? Looks like that can take hours.
My intention is to use the Time Capsule as a Hard drive so I can clean my Mac Mini hd since it was reaching capacity.
Thanks!

Ok, I just googled how to format my external hard drive to Mac OS extended (Journaled), no problem, understood.
Bear with me, I'm not too computer savvy, then connect to my mac mini, copy all my files to that ext. hd, then in system pref for the TC don't add to exclude?
I don't think I want to keep that also permanently connected to TC as then I'm backing two hardrives?

No audio for stap files...

I imported an aiff file that I had exported from FCP. In the multi-track it sounds fine. In QuickTime player, it sounds fine. When I open it as an stap file to use some effects - I just want to boost the gain - I get no audio out. I see the bars moving so the sound is there, I just can't hear it. This program worked fine a little while ago.
I am very frustrated and in a bind for time. Anybody seen this before? Could it be the latest qt update causing this? Help!!!
Thanks,
Mark

Mark,
O.K. originally I thought you were moving from multitrack to waveform permanently in which case you would want to use AIFF format. Now I understand that you're using the multitrack over again, and I think this is what you're missing.
You want to edit destructively not the default non-destructive; option use the other one (saving overwrites original file). See if that works, because there should also be the same effect with a non-destructive file, just as you said you used to do. It seems logical that at a certain point STP may not be able to process a larger amount of information immeadiately.
However that's just my guess, it may not be so. It may be that STP has become corrupted on your system and you need to reinstall. What version are you using? It could also be do to that, a specific upgrade like v1.1. So if using the other edit option doesn't work try reinstalling
Hope this is helpful to solve this, if not let me know.

Importing Audio for ppt files in Captivate

How do you import audio and sync over multiple powerpoint slides? I'm using Captivate 6

Welcome,
But this is a Captivate forum, not a PPT forum. If you use Captivate only for converting ppt-slides maybe a plug-in would be a better idea (Adobe Presenter, iSpring).
Record the audio in Captivate, using the Audio menu. You'll get one audio clip for each slide. And then you use the timeline to synchronize the appearance of objects. But if you are importing PPT-slides that have already animations and timings, you have to know that in CP you end up with a movie file, a recording of the PPT-slide, so synchronizing with a movie is not that easy as you perhaps know. While recording the audio you can watch the movie play in CP.
Lilybiri

No Audio for mp4 files converted using OVI

Hi,
I tried to convert Some of the AVI files which are playing fine on PC, to play it in 5800XM.
After converting using Noika OVI Tool, the video is playing file, but No Audio gets converted along with Video, Hence Cannnot hear the Audio while playing the file ..
the ratio is 3:1 for No audio files...
Thanks
Ussher

Can anyone confirm that Stage Video actually works on Ice Cream Sandwich? If not then is there a solution for playing video on android?

Installing DM on a second computer for Media files

So I use a Storm on a BES and I would like to be able to access DM from my home computer to transfer Media files. Other than the Media Sync program, is it OK to install DM again on my home computer and have it sync so I can transfer files and use the DM program to "change" my files so I can use them on the BB?
THanks for the help.

Yep. You won't be syncing any contacts, calendar, etc., from your home PC to the BB, so you should be fine just moving media to and from the media card.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

No audio for video files in lightroom 4 ?

i have been importing video files from my canon 7d into both lightroom 3 and lightroom 4 beta. the video works great in both, but there is no audio in 4 beta. Audio works fine in lightroom 3.

Odd. I get audio with mine.
Win 7, .mov file from Canon S90.
Hal

No audio for avi. file

so i downloaded this torrent file and there was video and no sound, i read the fourm disscusions for that particular file they all said it had sound and it worked. then i tried another torr. file download and there is no sound this time. inspector says
'DivX 6.0, 640 x 352, Unknown
'ms ', Stereo, 48.000 kHz'
not sure what that means i have divx and it works with that file but it doesnt have sound either. so i reinstalled divx thinking it needed an upgrade for the codec but no results. still no sound. other files in quicktime work great.
i have been reading around and it seems that the sound issue is with the upgrade to 7.5 or whatever it is.
any help is much appreciated.

I FIGURED IT OUT!!
so i booted my windows partion and ran the file it said i needed x-vid codec. so i googled it and found that there was a program that has the codec its even got a video on how to do it. its perian
http://perian.org/#download
its so simple its briliant

I tried to reintall os x mavericks but now is aking for apple id and pass w but dont have one what do i do?

Hello I really need help, Im totally stuck!!
I tried to reintall os x mavericks by following this steps:
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.)Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
lect Reinstall osx mavericks and click on the Install button
but now is asking for an apple id and pass word which i dont have. I know that the computer is a mid 2012 and according to apple rep the original software on computer was at least a 10.8 mountain lion but don't know how to retrieve since im not the original purchaser. What can i do to fix this problem? pls help!!

You will have to do the following which should install a copy of the original software pre-installed on the computer when it was new. You may then upgrade under your Apple ID.
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
            if possible because it is three times faster than wireless.

Installed 4.01, now no audio for DV files....

Similar Messages

Maybe you are looking for