Installed 7.5 on vista but no ringtones

I guess there have been problems installing itunes on vista basic, but I did it without an error message, but there is no Ringtone tab on the left panel. Anyone know why?

Update:
Problem is solved ! The pc was still on the "old" IP address from the previous wifi router. Setting the ip address for internet (Internet protocol version 4 (TCP/IPv4)) on "automatic ip addressdid the tric. Wait a couple of seconds and it connects automatic to the AE.

Similar Messages

I installed Itunes on my Vista, but error reads that there was no Apple Application Support installed and Itunes needs this in order to run

I need to back up my iphone 5s on my old PC running Windows Vista SP2. After installing the proper iTunes that would run on Vista, I get an error as follows;
"Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Windows error 2)"
I will appreciate any help. Thanks

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Re-Install CS2 on Win VISTA but setup.exe now does not respond

I successfully installed and ran my legal, registered CS2 Production Premium on two different Win VISTA 64 machines, first on my original desktop, then my current laptop, which is what I now use.
Each time, CS2 installed OK. I had learned the "trick" was to stop the installation after the last program, before the suite proceeded to do the final steps. If I failed to stop prior to those final steps, the error message about registration occurred. If I stopped prior to the conclusion of the installation, then each program worked fine.
HOWEVER... I recently downloaded and installed CS5 demo, then removed CS5. I had uninstalled CS2 in preparation (because of disk space and potential conflicts). I cleaned the registry, as I also did after uninstalling CS5.
When I went to re-install CS2 (using the original legal disks), now the setup.exe program DOES NOTHING. It whirs when clicked, as if it's launching, then sits idle, not performing any tasks. I've let it "try" for hours, but no results.
I have: clicked on the file from Windows Explorer, I have opened a command line window and run e:\>Setup.exe, I have even copied the disk to the desktop and tried to run Setup.exe from there. There is never an error message. There is only no activity whatsoever from setup.exe.
During the time of the last successful CS2 installation and the current attempt to install, there have been several Vista updates installed on the machine.
So, I have successfully run CS2 on Vista 64, but not since removing the CS5 demo. My system is a multi-core AMD 64-bit processor running Windows Vista Home Premium Build 6002 with all Microsoft updates applied. (And yes, having not had any paying job in almost three years, I cannot figure out a way to fund the upgrade...and, of course, Adobe has cut off support of any kind for CS2.)
Does anyone have experience and a solution?

CS2 is completely unsupported under Vista and Win 7. 64 bit makes it even more difficult.
Unfortunately, you're on your own here. Best bet would be to upgrade to CS5 and you should take note of the fact that if you don't and you wait til CS6 ships you will be out of the upgrade loop altogether and will have to pay full price.
Bob

Install Tomcat on Vista, but wrong path

Hi
I am new to Tomcat 6, I installed jdk 5 on Vista, but the jre is 6.
I set the JAVA_HOME : C:\Java\jdk5\bin (I changed the install folder name to be jdk5)
PATH: C:\Java\jdk15\bin
CLASSPATH: C:\Java\jdk15\bin
CATALINA_HOME: C:\Tomcat
When I run C:\Tomcat\bin\startup.bat, it said JAVA_HOME environment variable is not defined correctly. JAVA_HOME should point to JDK but not JRE.
But the path did point to jdk as I install jre5 on C:\Java\jre5.
Any idea?

techissue2008 wrote:
Hi
I am new to Tomcat 6, I installed jdk 5 on Vista, but the jre is 6.Huh?
I set the JAVA_HOME : C:\Java\jdk5\bin (I changed the install folder name to be jdk5)Wrong. Should be c:/Java/jdk5
PATH: C:\Java\jdk15\binIf you can open a command shell, type "java -version" and get back something sensible, then this is correct.
CLASSPATH: C:\Java\jdk15\binWrong. Delete this. Not needed or wanted.
CATALINA_HOME: C:\TomcatIs that where you installed Tomcat?
When I run C:\Tomcat\bin\startup.bat, it said JAVA_HOME environment variable is not defined correctly. JAVA_HOME should point to JDK but not JRE.
But the path did point to jdk as I install jre5 on C:\Java\jre5.
Any idea?Yes, your environment is screwed up. See if those fixes make it better.
%

309g printer will install wireless on Vista but will not install on XP

Trying to install Photosmart 309g printer wireless, will install on computer with Vista but will not install on computer with XP, it finds printer on network but fails part way thur install. Installes great on Vista computer. What can I do??

The steps for XP in this document from HP are a great start to resolving issues of this nature. While the behavior is not exactly identical, the steps have the best chance of resolving the issue.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

"iTunes folder cannot be found" when installing itunes on windows vista

I want to install itunes on windows vista but the itunes installation doesn´t work. The iTunes folder cannot be found and isn´t on the computer

Hi ilseaelfers!
I have an article here for you that can help you troubleshoot this issue with your installation of iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Help plzzzzz i try to download the itunes 10.5 windows vista but it not working this is what it show "there is a problem with this windows installer package. a program required for this install to complete could not be run. contact your support personnel

i neen try to down load the new itunes 10.5 for windows vista but for some reason it is not working at all . this is what it show for the errors is "there is a problem with this windows installer package . a program required for this install to complete could not be run. contact your support personnel or package vendor" plz help me with this!!!!!!!

Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
Start > Control Panel > Programs n Features > highlight ASU and click CHANGE then REPAIR,

Trying to install Acrobat on a Vista laptop, but can't find the installation icon in the Adobe Application Manager

Hi, trying to get Acrobat installed on my Vista laptop but can't seem to find an icon for it in the Adobe Application manager. I have a CC license and it installs fine on my Win7 but can't seem to figure out how to install it on my Vista laptop. Any help would be greatly appreciated. Thanks!

Normally if something does not appear in the download options it means the machine does not meet the tech specs for the product. In this case, Vista is not in the tech specs for Acrobat Pro XI if that is what you are trying to install. For whatever reason it skips from XP to Windows 7.

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Why can't I install Itunes on windows vista 64 bit?

Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails. I get this complicated error mesage and then the installer rolls back and fails.

I get this complicated error mesage and then the installer rolls back and fails.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Missing CD/DVD drive after installing iTunes w/ Windows Vista

I have a Toshiba Satellite A135-S4427 laptop. The problem I am having is when I install iTunes my CD/DVD drive disappears. The drive is listed in the device mananger but it is corrupt ( yellow triangle). I can restore the drive by going back to system restore before iTunes was installed.It was sugested by Toshiba that I wait for the Windows Vista/ iPod fix. It has been sometime and there has been no word of a fix. I just bought my laptop in march and my iPod last month and I can not use it unless I load all of music one time and do a systems restore and loose it. It has become very fustrating as all the hot fixes do not apply to Vista but XP. I really need some support from someone. Microsoft charges 95 bucks a hour ( I think) and Toshiba says it is a Apple/Windows problem.
Thanks-

Here is the Diagnostics for my drive. I want to make a correction to my last post. I am only showing lower filters in the Redgit.
Microsoft Windows Vista Home Edition (Build 6000)
TOSHIBA Satellite A135
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is not an administrator.
Video Display Information:
Intel Corporation, Mobile Intel(R) 945GM Express Chipset Family
Intel Corporation, Mobile Intel(R) 945GM Express Chipset Family
Connected Device Information:
DiskDrive, TOSHIBA MK1234GSX ATA Device, Channel 0, Target 0, Lun 0
CDROM, PIONEER DVD-RW DVR-K17A ATA Device, Channel 1, Target 0, Lun 0
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: PIONEER DVD-RW DVR-K17A, Rev 1.50
Drive is empty.

Trying to install itunes on windows vista and get the following error message:

Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

Windows 7 Clean Install on T500 with Vista

So my thinkpad t500 was infected (the entire recover area was also infected). It came with Vista and I just got the recovery media CDs for Vista. But I don't want to install Vista. I have a legitimate copy of Windows 7 that I purchased and completely formatted the entire laptop (all the partitions including the recovery media partitions which were infected). IBM does not sell Win 7 recovery media (if your laptop came with vista installed) unfortunately.
Now I have win 7 working but I have no internet connection.
I tried to install Thinkvantage 5.02 so that thinkvantage can automatically download the drivers (but the internet connection is not working so that is not going anywhere).
I had downloaded a couple of drivers from lenovo's website. I installed one of them called 7vr722ww.exe. It did not work (no internet connection). When I go to device manager the network adapters say they are upto date.
Any help with downloading and fixing the OS would be great. A step by step approach would be better. I saw some tutorials online but they are not very useful but I could have missed something here.
I tried this tutorial : http://forum.notebookreview.com/lenovo/642274-patchysans-guide-clean-installing-windows-7-thinkpad.h...
and could not go beyond step 8 (updating drivers does not work). I also don't have anything beyond the recovery discs for vista (not windows 7). I looked for any executables in the two recovery cds for vista but found none.
Thanks for any help that anyone may be able to offer.

Ok I am using 32 bit system (or I think I was but I accidentally installed using the 64 bit dvd! I am going to do another clean install to fix this tomorrow)
This time around (on my second/third attempt at clean re install) I kept the wifi radio signal on and win 7 installation asked me for a password and I entered it at it worked! (had some issues because I was trying to simultaneously connect via ethernet but once I unplugged the ethernet cable I am now online using my clean installed machine).
I am now downloading thinkvantage system update and it is downloading a lot of recommended and other drivers.
In my third time around clean install I deleted the 2 partitions that my thinkpad came with and combined all into one partition and formatted it (so as to avoid the virus from re emerging , unless the virus in the bios in which case I don't know what I can do).
Win 7 created its own 100 MB partition and lets hope that thinkvantage does the right thing and creates the recovery media and cds which I may then use to create my own recovery CDs for this computer.
I see that system update has ended the downloads and installs but I dont see any system recovery options. How do I get the recovery and rescue software on this ?
There is something strange that win 7 (and vista on t500 ) does: the computer freezes upon startup and I have to ctrl+alt+del and then click on task manager to unfreeze it. Is this happening with other people?
I must say that buying lenovo's thinkpad is like the most awful experience ever. I have a 2004 thinkpad from IBM and it still works just fine (with xp) and works better than my brand new 2009 T500! ... the T500 by lenovo is just awful. Months after buying it the right button of the mouse on the laptop stopped working. I use an external mouse now because I did not have the time to send and mail the entire laptop (I had to make do and now the warranty has expired and they wont even renew it!). When I try to type on the keyboard I accidentally triger the laptop's half functioning mouse ! it is just an awful experience altogether with the shoddy workmanship and garish clunkiness of design.

Can't Install Itunes 8.2 Vista 32 bit

I have used Itunes for the past two yrs on this machine with no problems till this recent version of itunes was released. I have had nothing but problems trying to install. Running windows Vista Home...I keep reaching a point in the install and I get an error message that reads "The installer has insufficient privileges to modify this file: *C: \Program Files\ipod\bin\ipodService.Resources\res.lproj\iPodSerceLocalized.dll." This is my home computer, I am the only user ID, so I am the admin. To trouble shoot I have installed all microsoft updates, uninstalled all Itunes and apple software, made sure all firewall software has been turned off, and no luck. I have even tried going into programs and deleting the Itunes folder after the uninstall and I get another message saying "You need permission to perform this action". Contacted apple for support and other than suggesting I uninstal Itunes, then reinstall, they were no help and directed me to microsoft. Microsoft has pushed back and said "Itunes is 3rd party software and you must get help from apple". I'm stuck....can anyone help????

All I can say is make sure you are the administrator and if not right-click on the installation program and click "Run as Administrator", and delete all traces of iTunes off the computer, i.e. delete the folder C:\Program Files\ipod as you say. Make sure it is the latest version of iTunes and is for Windows Vista (not XP). Another thing to point out is to make sure your Computer is compatible with iTunes 8.2 (perhaps try installing iTunes 8.0/8.1 by searching for the link in Google).
If you have done all of that and it still does not install then I do not know what is wrong. As iTunes is one of the many applications i use 24/7 (pretty much) and I use it all the time, I would try installing it on a similar Windows Machine with a similar configuration and it works, I would reinstall Windows on your personal computer. If not, take the case further as I cannot think of anything else that could be wrong, so long as you have not edited the installation program or anything Good luck.

How to install windows xp over vista on a toshiba satellite A200 1YO

How to install raid/scsi drivers and get rid of vista for good
what you will need
â?¢ 1 USB external floppy drive
â?¢ 2 floppy disks
â?¢ 1 set of drivers for the hard drive you have in the computer
â?¢ a legal copy of windows xp pro
WHAT TO DO WITH THE FLOPPY DISKS
COPY THE DRIVERS DONT CUT AND PASTE THEM
â?¢ get DISK 1 and place the drivers required onto the disk as they are without any folders
â?¢ get DISK 2 and make a folder called $OEM$ and within that folder make another called TEXTMODE then within that folder insert the drivers that you have in disk 1
Installing the drivers and windows xp pro
â?¢ when windows asks you to press F6 to install raid drivers press F6
â?¢ then enter DISK1 into the floppy drive
â?¢ when it prompts you to press "s" to install...install the raid and storage controllers
â?¢ press "s" again and press enter on the same raid driver you just told windows to use
â?¢ windows will then say that it already has drivers for the raid controller
â?¢ press the appropriate key to tell windows you want it to use the floppy drivers instead of windows own
â?¢ after the drivers load remove the floppy disk
â?¢ wait until windows asks for the drivers again and insert DISK 2
â?¢ and windows will install at long last vista is GONE you will need the drivers for any hardware your computer system but they should be easy to get from the manufacturers web site
I have used this method and it worked with a Toshiba satellite a200 1yo laptop with no problems
PLEASE LEAVE COMMENTS ON HOW YOU GOT ON TO LET OTHERS KNOW THAT THIS METHOD WORKS THANKS
Message was edited by: tamwilson

How to install raid/scsi drivers and get rid of vista for good
what you will need
? 1 USB external floppy drive
? 2 floppy disks
? 1 set of drivers for the hard drive you have in the computer
? a legal copy of windows xp pro
WHAT TO DO WITH THE FLOPPY DISKS
COPY THE DRIVERS DONT CUT AND PASTE THEM
? get DISK 1 and place the drivers required onto the disk as they are without any folders
? get DISK 2 and make a folder called $OEM$ and within that folder make another called TEXTMODE then within that folder insert the drivers that you have in disk 1
Installing the drivers and windows xp pro
? when windows asks you to press F6 to install raid drivers press F6
? then enter DISK1 into the floppy drive
? when it prompts you to press "s" to install...install the raid and storage controllers
? press "s" again and press enter on the same raid driver you just told windows to use
? windows will then say that it already has drivers for the raid controller
? press the appropriate key to tell windows you want it to use the floppy drivers instead of windows own
? after the drivers load remove the floppy disk
? wait until windows asks for the drivers again and insert DISK 2
? and windows will install at long last vista is GONE you will need the drivers for any hardware your computer system but they should be easy to get from the manufacturers web site
I have used this method and it worked with a Toshiba satellite a200 1yo laptop with no problems

Installed 7.5 on vista but no ringtones

Similar Messages

Maybe you are looking for