Installed 8.0.1.11 for windows and lost space to "other"

I installed 8.0.1.11 for windows. iTunes then spent a few hours updating my library. When I synced (checked tunes, I don't do manual) my 80gb Classic (which was 100mb from full), about half of my music was removed and then it started to reload. Somewhere along the way my "other" went from being around 500mb to 13gb, and my music no longer all fits. I can't figure what the "other" is. My music/photo/etc capacity is down to around 61gb. I've downloaded and installed 8.0.2.20 but no change.
Can I reload an earlier version? Has this happened to anyone else? I have no video, no podcast subs, just music and a few pics.

In normal usage, "Other" can be Album Artwork, Notes, Contacts, Firmware etc. or (and this doesn't apply to the iPod Touch or iPhone which don't have the option to enabled for disk use), files that are on there if you are using the iPod as a removable storage device.
If Other is being incorrectly reported then try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes

Similar Messages

Installed Dreamweaver MX 2004 update for Windows and now Dreamweaver won't open. Help?

I was having some glitches uploading to a host I ftp to often so I decided to check for a Dreamweaver update for MX 2004. When I found the Windows update and tried to install - it told me to uninstall Extensions. I uninstalled extensions and continued with the installation of the update. Now Dreamwever will not open at all - it says Dreamweaver MX 2004 has stopped working. I can see the update is installed since the version is 7.0.1. Any ideas on how to undo the update? I have no idea where this program disk is right now for reinstallation plus all my servers are already setup....

You might try Windows System Restore to a point before you installed the update.
Good luck.
Nancy O.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I o

Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I own. My System: Mac OS X 10.6.8, 2,8 GHz. Thanks for answers! Greetings, Eva

Here is a link to the info regarding platform swaps.
Order product | Platform, language swap
If you want to try to contact Adobe support to try to get an exception, Start Here after selecting relevant responses choose "Still need help? Contact us." and the chat contact (or phone) option.

Known Issue: Do not install Visual Studio Express 2015 for Windows 10 on a Machine with Visual Studio Community, Professional, or Enterprise (Windows 10 Insider Preview SDK and tools, April 2015 release)

If you install Visual Studio Express 2015 for Windows 10 on a machine with Visual Studio 2015 Community, Professional, or Enterprise, these editions will not work as expected.

To resolve this, uninstall Visual Studio Express 2015 for Windows 10. Then, repair Visual Studio Community, Professional, or Enterprise.

Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
Thanks for any suggestions you can provide!
Marilyn

Hey there Marylin,
It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

Problem with Office 2007 whenever I install the iCloud Control Panel for Windows

Sadly I have a Win7 laptop as my work hack and am using Office 2007. Outside of work I use iCloud to sync calenders between various iOS/OS X devices however whenever I install the iCloud Control Panel for Windows Plugin my email no longer loads. Outlook starts fine and just sits there with an empty inbox waiting for mail to load. I can't even open the iCloud Panel from within Control Panel either to set preferences!
Unistalling the iCloud plug-in resolves this but I really want to sync my iCloud calender with Outlook and can't see any other way to do it, plus it worked before and then just stopped.
Any assistance would be appreciated.

I tired everything that was suggested in the forum. Tried IE and firefox to no avail. When I tried computers in stores both worked. A friend of mine who has the 32 bit setup got it to work. Several folks have stated it is the compatability issue with 64 bit. As a last resort, I loaded safari on my home computer, and yep, it works. Go figure, apple product.

How do i Install the Software Update Server for Windows 7?

How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.

Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

Issue while Installing Oracle Data Access Software for Windows

All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
Ramesh

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

SAP GUI 7.20 for Windows and problem with Screen Painter

Hello,
I just installed the SAP GUI 7.20 for Windows and it looks good.
But when when I start the Screen Painter for a dynpro I get the following message:
Graphical Layout Editor not available. Continue with alphanumeric editor.
And: EU_SCRP_WN32 Connection broken '..' / CPIC
The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
Any idea?
Regards,
Ole.

Hello,
I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
And now I will update the Screen Painter with the information from the OSS-Note!
Thank's for your help!
Regards,
Ole.

Install new Dictionaries on Safari for Windows

Hello
I would like to install some dictionaries for languages, not yet supported from Safari like Russian, Greek etc., on Safari for windows. I have already installed aspell for windows and it works fine with opera. Is it possible to configure it to work with safari too? If not, how can I spellcheck on other languages than the supported ones from Safari?

Someone posted the location in the forums, but I can't find it.
Checked Windows Explorer... try making a copy of the "en" file in the folder: C:\Documents and Settings\(username here)\Application Data\Apple Computer\Safari\Spelling
Next, edit the en file to add words you want. Not sure if you can add your own language files in that folder...

Installed 8.0.1.11 for windows and lost space to "other"

Similar Messages

Maybe you are looking for