Installed 8.5 and now I can't build an installer with 8.0

I've been using 8.0 to write some applications. We have the professional development system contract or whatever with NI providing upgrades. Our IT dept came and installed 8.5 on my computer. I used it for a short while, then went back to 8.0. I have not un-installed 8.5. I'm now experencing problems building an installer with 8.0. I get the message box that it is "unable to locate the installer source for NI Labview 8.5 distribution" and a default D drive for the original CDs which I don't have. I do have the original 8.0 CD's and mainly for that reason want to continue to use 8.0. In the build process I am using additional installers for datasocket and visa 4.2. If I uncheck them the install process will complete. Is there someway for me to force my installer builder to use the 8.0 files instead of 8.5? Could I do this by un-installing 8.5? I re-installed 8.0 hoping that would help but it did not. I searched for this problem and found several earlier postings concerning this problem but none specific to this particular issue. thanks for any advice, Mike

Thanks for the input centerbolt. What a pain huh? I'll have to think about if I want to do all that for a while While I have administrative rights on my pc, the IS dept. is so paranoid what people might do I'm uncertain of restrictions that might stop me part way through and then be unable to recover or something. I like LV a lot but not real happy with the build processes for compiling programs and installs. If I copy the LV CDs to my C drive and then do the installation from there rather than the CD drive, will the program installer quick defaulting to the D drive for unfound drivers? Does that make sense? Anyway, thanks again.

Similar Messages

Just installed OS Yosemite, and now I can't open Illustrator CS6. Asks me to update my Java, but I check and my Java is up to date. Please help!

Just installed OS Yosemite, and now I can't open Illustrator CS6. Asks me to update my Java, but I check and my Java is up to date. Please help!

Some people have reported reinstalling the Apple 2014-001 Java update has helped.
See thread 7 here Illustrator CC 2014 crashes on startup after Yosemite 10.10 upgrade today.

I upgrade my Iphone 5C with IOS 8.1.1 and now I can't synchronize my iphone with my computer, it stop on level 3 (calendars synchronization)

Problem of Iphone 5C synchronization after an upgrade 8.1.1.:
I upgrade my Iphone 5C with IOS 8.1.1 and now I can't synchronize my iphone with my Apple computer, it stop on level 3 (calendars synchronization). Could you help me ?
Thanks

have you read this:
http://support.apple.com/kb/TS1591

I installed the upgrade and now itunes can't find my library and doesn't recognize my devices. Using Windows 7. Any help?

Help!!! I installed the 10.5 update and now itunes can't find my library or recognize my devices. Running on Windows 7.

For moving your iTunes library, I recommend this method...
Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
If you are just testing, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location.
Back up your iTunes library by copying to an external hard drive
http://docs.info.apple.com/article.html?artnum=307074
Patrick

Installed firefox 31 and now I can't get to our oracle enterprise manager 12c URL

Hi,
On Monday, I upgraded to Firefox 31 and now I cannot connect to our Oracle Enterprise Manager Cloud Control Web site. I get the following error message:
Secure Connection Failed
An error occurred during a connection to lmoemxs101q.atl2.dc.sita.aero:7799. Issuer certificate is invalid. (Error code: sec_error_ca_cert_invalid)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
I am not sure what to do to get rid of this message. I need to use OEM to monitor our Oracle databases and I am no longer able to do this.
Please help.
Thanks,
Roya

Thanks. I made the parameter change yesterday and now I can get to OEM and monitor our Oracle databases. I sent the workaround to my fellow DBA's in our office, as they all had the same issue with Firefox 31.
You mentioned that this the "insecure workaround" and should be used temporarily. How unsecure is it, and is the a better workaround being worked on?
Thanks,
Roya

HT201269 Best Buy started the setup assistant on my new iPhone 5 and now I can't make it sync with iTunes. How can I reset and start over?

I bought an iPhone 5 at Best Buy, and they started the setup assistant process. Now I can't go back and start over so I can sync my phone to my iTunes account. I have an old iPhone 3GS and didn't use the iCloud. I backed up to my computer. And now I can't reset my iPhone 5 to sync to my iTunes.
Help.

I purchased a iPhone 5, and after completing a backup of my old iPhone 3GS, I in error selected Set Up as a New iPhone in the Setup Assistant.
I connected to iTunes and did a Restore iPhone, which set the iPhone5 back to factory defaults, and I was able to restart the Setup Assistant, and following the apple support instructions, restored from my 3GS backup and synced with my iTunes account. The Restore kept my phone number intact.
I was worried that I would lose the setup of my phone number that was done in the store, but everything worked perfectly.

HT3529 I had a iphone 4s with imessage activated, I switched to android and now I can still text other people with iphones but they can't text me. What can I do?

I Had an iphone 4s with imessage activated, I switched to an android and now I can't recieve texts from iphones that have imessage turned on. What can i do?

iMessage works by linking your Apple ID with your phone number
When you send and receive messages to and from other iPhone users who’ve also got iMessage activated, they’re sent and delivered over the internet as iMessages rather than as SMS
Non-Apple phones can’t receive iMessages so if you no longer use an iPhone, you need to deactivate it. This lets iPhones know to send you messages via SMS instead
If you’ve got access to your iPhone
Ensure your phone is connected to the internet (3G or Wi-Fi) so that the changes will sync with your Apple ID.
Go into ‘Settings’.
Tap ‘Messages’.
For ‘iMessage’, move the slider to ‘Off’.
If you don’t have access to your iPhone
Go to supportprofile.apple.com/MySupportProfile.do.
Log in with your Apple ID and password.
Select the product you need to de-register (your iPhone, for example).
Click ‘Unregister’.
You’ll see the message ‘Are you sure you want to unregister and delete this product?’ – Click ‘Unregister’ again.

I messed up while installing Boot Camp and now I can't restore my drive to a single partition.

Hey all, I have a late 2013 iMac on 10.9.4. Just got it a few days ago and tried to install my copy of 8.1 on it.
After taking a while to create a bootable USB disk, I partitioned ~470GBs through Boot Camp Assistant to use as a Windows partition. Long story short, during my install, I ran into some problems while choosing the drive to install Windows onto. Now I remember when installing Windows 7 on my MBP, deleting the partition and reformatting did the trick, so I tried that. Windows gave me a prompt saying it will create new partitions for system files. I didn't think much of it, so I said sure. After all that, still ran into some problems.
Was about to give up to I rebooted into OSX to restore my drive, but was met with this error:
I checked my disk utility and I had 2 extra partitions--disk 1s4 and 1s5 or something similar. Managed to get rid of one, but the other one was impossible to get rid of, despite my efforts. Now I have my main partition, a disk1s4 partition I can't get rid off, and and 478.09GBs of free space that I can't get back at the moment.
So. I messed up. What are my options now?
Here's what it says in diskutil list:
Thanks guys, any help is appreciated.

I tried to restore the previous session as I've done so several times before, but I was not given the option. It simply did not show up on my browser history. I also tried to restore a previous version of the sessionstore file, but it did not do anything except erase my browser history from the restoration point. Also, after i restored the sessionstore file, the ability to see my "ghost" tabs that were open is now gone, so I assume it's lost forever. I deleted the sessionstore file before restoring it, and put it back into the folder, but that did not restore my history. What am I doing wrong?

I installed an update and now I can't open App Store or iCal.

I installed an update, but now when I try to open App Store or iCal, I get this error message:
"App Store cannot be opened because of a problem.
Check with the developer to make sure App Store works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
I've tried restarting the computer, and I read that removing the programs from your dock and then putting them back could fix it, but neither worked. What's wrong and how do I make it work?

Same problem here. In fact, it started when I installed Mac OS 10.8.1. Since, everything was working super slow. Tried all the tricks that I've read here but nothing worked.
Had to restore my whole Mac from Time Machine. Then everything started to work smoothly except for one thing: App Store cannot open anymore. So I can't install the new Mac OS 10.8.2.
I've downloaded it from Apple, but it won't install. It says Mac 10.8.2 failed due to an error.
I just don't know what to do. So far, Mac OS 10.8.1 has been a giant nightmare to me. I'm a graphic designer who works on Macs for years and years so it's not that I don't know how it works.
I'm hopeless now.

Mozilla was crashing every few seconds and I couldn't install the update. I removed the old to install the new and now I can't install - getting error messages that close themselves.

When I try to install I receive this message:
"Firefox has stopped working
A problem caused the program to stop working correctly. Windows will clsoe the program and notify you if a solution is available."
This happens when I select RUN to install Firefox 9.0.1
I removed the old version because it was crashing everytime I tried to use it and it wouldn't let me update with the new.
I HATE IE, and need my Firefox back --- I am dead in the water for work without it.

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT1386 I have had to have a new hard drive fitted to my Apple Mac and now I can't sync my music with my iPhone, it thinks it's a new computer. Please help, What do I do?

I have had to have a new hard drive fitted and now I cannot sync my Iphone with my Apple Mac, thinks it's a new computer. Any ideas Please?
Alan C

I keep this as a copy and paste. It's the same process for Mac as it is for a PC. Read it over and see what you think. Post back if you have questions.
The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your Mac and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your PC. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527

I installed Maverick's and now I can no longer use my Epson Scanners, Epson Perfection V700 Photo and the GT-S50 ?

My MAC now notes that I can't open the application "Epson Scan" because PowerPC application are no longer supported.
What is the fix and how do I download it ?
Thanks,
Rusty in the Rockies

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQs&oid=237343

Installed windows 7 and now i can not use microphone

How can i fix my micraphone it will not work after installing windows 7?

Hi:
You may have to install the Vista audio driver for your notebook from your notebook's support and driver page. That is normally the solution.
Without the model number and version of Windows 7 you are running (32 or 64 bit), I can't help more than that.
Paul

Help please! I have just installed Snow Leopard and now I can't access my gmail account. I can complete the sign in boxes ok but the blue indicator bar freezes and prevents access to my emails.

I have just installed Snow Leopard, (10.6.3) onto my Macbook Pro and so far it seems to be working fine except that I can't access my gmail account. I can sign in but the blue opening indicator freezes near the end and I can get no further. I'm a bit of a novice at this stuff - help please!

I would run the combo update to get to 10.6.8 in order to get the latest security updates and so forth. Then run Software Update until you system is current.
10.6.8 Combo Updater
G-mail problem.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
IMAP or POP setup?

I downloaded and installed an application and Now I can't find it.

MacBook Pro (Retina, 15-inch, Early 2013) 10.10.2, 2.7 GHz Intel Core i7, 16MB, SSD.
I installed Epson Printer CD from the internet and installed it. It is not in my Applications, main or users, and I can't find it in a search. I tried to reinstall the application but the installer said "Print CD Software is already installed on your computer"
I used TinkerTool to show all the hidden files and no app found.
I tried Automator but I could not figure out how to find hidden apps.
I used the finer to find.
How can I find it?

Printer driver software is not an application. It will load when the computer is restarted or when you install the printer in Printing & Scanning preferences. Read the documentation for using the software.

Installed 8.5 and now I can't build an installer with 8.0

Similar Messages

Maybe you are looking for