Installed airport extreme OK, netwk utility says it's not 802.11n

Installed new Airport Extreme without problems. Mac has 2GHz Intel (iMac 4,1), so it should be capable of 802.11n. Network Utility shows (802.11 a/b/g) under Interface (en1). Should this not be 802.11n? How do I know I'm using 802.11n?

Hi
What you see under the e1 interface is what the Airport card can have as WiFi
if you only see 802.11 a/b/g then it would mean that your imac is not 802.11n
able. You should be able to read something like
Wireless Network Adapter (802.11 a/b/g/n)
and linkspeed 300 Mbit/s if you have n

Similar Messages

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
Thanks for your help.

I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
To get this password, you will use the AirPort Utility from the MacBook:
Start the AirPort Utility > Select the AirPort base station > Manual Setup
Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

I am installing airport extreme using my pc what is the latest version of software i should use

I am installing airport extreme using my pc what is the latest version of software for airport extreme should I use?

AirPort Utility 5.6 for Windows.
http://support.apple.com/kb/DL1547

Why airplay stop when installed airport extreme

After installing airport extreme, I cannot airplay from my iPhone 4S.

First check to make sure that the AirPort Extreme (AEBS) has been configured to allow the wireless to be extended.
Open AirPort Utility, select the AEBS and click Manual Setup
Click on the Wireless tab just below the row of icons in the setup window
Make sure there is a check mark next to "Allow this network to be extended"
Jot down the exact name of the wireless network and the type of security that the device is using
Click Update to save any changes
Perform a Factory Default Reset on the AirPort Express (AX) as follows:
Power down the AX for a few minutes
Hold in the reset button and keep holding it in another 10-12 seconds as you plug the AX back in to power
Release the reset button and allow 40-45 seconds for the AX to restart to a slow, blinking amber state
Connect an Ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup
Click the Base Station tab below the icons to assign a name to the AX, device password and adjust Time Zone settings
Click on the Wireless tab and adjust your settings as follows:
Wireless Mode = Extend a wireless network
Wireless Network Name = Exact same name as your AEBS wireless network
Enter a check mark next to Allow wireless clients
Wireless Security = Exact same setting as the AEBS network
Wireless Password = Same password as the AEBS network
Confirm Password
Click Update to save settings. Close AirPort Utility as soon as you see the message that the settings have been stored and wait 40-45 seconds for a green light.
Unplug the AX and move it to a location that is approximately 1/2 the distance from the AEBS to the area that needs more wireless coverage.
If you are using a PC, as your post indicates, the Windows Firewall will often block the connection between AirPort Utility and the AEBS or AX, so you may need to check the firewall settings for "blocked" connections, or you may need to "allow" a connection in the firewall application.

How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

I am trying to get an answer to whether or not I can successfully use Time Machine with an external HDD connected to an airport extreme? Some forums say yes, some say no.

I am trying to get an answer to whether or not I can successfuly use Time Machine with an external HDD connected to an airport extreme. Some forums say yes, some say no. I'm also curious about formatting the hard drive to work both on my wife's MacBook Pro and my PC. Any help would definitely be appreciated.

You may be going on a recollection, that I share, that at one time Apple stated this would be possible:
In fact, Apple’s Time Machine Web page touted this very capability as recently as last Tuesday, as you can see from Google’s October 16 cache of the page
Effortless meets wireless. With a hard disk connected to your AirPort Extreme Base Station, all the Macs in your house can use Time Machine to back up wirelessly. Simply select your AirPort Disk as the backup disk for each computer and the whole family can enjoy the benefits of Time Machine.
But if you look at the current Time Machine page on Apple’s Web site, that text is nowhere to be found.
That was a long time ago, it has never been officially implemented, and at present they specifically say it cannot be done.
In summary, it may work, but probably won't, and even if it does it may not be reliable.
Reference:
Disks that can be used with Time Machine
Time Machine can’t back up to an external disk connected to an AirPort Extreme, or...
and
Mac OS X v10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks

Trouble with Maya 8.5 after installing Airport Extreme

Installed Airport Extreme 802.11n a couple weeks ago - using OS 10.4 on an iMac and 10.3 on G4 Quicksilver.
Network is working fine.
Tried to use Maya 8.5 this week and program freezes on startup. Only change to Mac system is installing network.
Is Autodesk license manager unable to recognize computer with network setup?
Thanks for any help.

Maya not being able to recognize the license dat file will not cause Maya to lock up or crash. Have you run a Maya crash log to confirm what is causing this? Since upgrading from Tiger to Leopard I also upgraded to Maya 2008 (don't know why Autodesk didn't call it 9.0..lol) from 8.5. I haven't experienced any system crashes on Leopard, even on the MacBook Pro (Core 2 Duo 2.33 GHz, 3 GB RAM, ATI X1600). Note: I'm also using the AEBS in the SOHO and no issues with the license server.

HT3024 after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

Hi David,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Tried resetting the PMU for PB/iB?
http://docs.info.apple.com/article.html?artnum=14449

After installing airport extreme, can't recieve mail on comcast/outlook??

After installing Airport Extreme my internet works well, however I can't recieve email on my comcast/outlook. Outgoing works I have rechecked my settings and they all seem to be ok. Help?

Hello mrpardue,
We've an article that provides information and steps which can help get your mail moving again.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Cheers,
Allen

How to install AirPort Extreme card in eMac?

I just recently acquired a 2005 G4 eMac (the top-of-the-line model with the SuperDrive and 160 GB hard drive), and I am trying to install an AirPort Extreme card into it. Apparently I think the instructions must differ from this one:
http://support.apple.com/kb/HT2596
Since this is for the older AirPort cards.
I pushed the card in all the way, logo facing downward, screwed in the antenna, etc., but the Mac still won't recognize it! What should I do to get it working?

Numerous eMac users who installed Airport Extreme cards in the past have brought up that the Extreme card is a very tight fit in the eMac Airport slot, especially compared to the original Airport card. Often, the card appears to be fully seated, but is actually some fraction of a millimeter out. After seating the card according to all the instructions, you have to push hard on the edge of the card to get it to really seat all the way, hard enough to just start to push the 50-lb eMac away from you (don't try this with the eMac on the very edge of the table or desk!). I ran into exactly that putting an Extreme card in my in-law's eMac, and I had already read other's warnings; that may give you some idea how firmly you really need to push the card once it feels as if it's seated.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

Adding 3 Airport Extremes to Linksys WGT4400N in Bridge Mode Not working

I have a network that starts in a homerun closet and is expanded across 5 acres to differnet locations via CAT5e.
Homerun Closet has Linksys WGT4400N with Cat5e running to three different locations on property. The cables are within length limitations.
1st Airport Extreme N Running in Bridge Mode Connected and Working in Main House
2nd Airport Extreme N Running in Bridge Mode Connected and Working in Guest House
3rd Airport Extreme Replaced with new one Connected and Not Working in Office. This Airport Extreme N is configured just like the others but it cannot see the network. Cables Verified with Testers and Mac Pro at office location, works when ethernet cable is directly connected to system.
Not sure what is going on. IS there s limit to the number of Airport Extreme N's used as bridges?
I have 2 of ther working and the last is not. First Airport Extreme N for office was bad replaced.
Thank You
GldnSabre

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet?

safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet? then a couple minutes later it reconnects. I am on an AT&T wireless.

my mac G4 does not have any problem with this. suspect it is safari, airport never drop off or turn off, just safari

Installed airport extreme OK, netwk utility says it's not 802.11n

Similar Messages

Maybe you are looking for