Installed an SSD in place of hard drive, DU reports that there is an invalid number of allocation blocks.
I recently installed a Mercury Extreme Pro SSD in my laptop in place of the hard drive. I used Carbon Copy Cloner to make the SSD a bootable disk and transfer all my files. Today (about a month later) while checking the old HD (now in an external case), I decided to run "Verify Disk" on the new SSD. When I run it on the disk volume, Disk Utility reports that there is an invalid number of allocation blocks - much to my surprise. When I run it on the drive itself there are no errors.
The new disk works fine as the startup drive. What's the meaning of the error and how do I fix it?
No, on both counts. FW800 will not support the speed of SSDs. It barely supports the speed of very fast hard drives. But it beats USB 2.0.
Similar Messages
-
How can I re-install CS2 upgrade on a new hard drive without serial no. of previous Photoshop 5?
A new hard drive has been installed on my G4 Mac with OS10.4. I am trying to re-install CS2 Premium on the new hard drive but I no longer have the serial number of my previous Photoshop 5. I need to enter this as the CS2 was an upgrade. I have spoken to Adobe technical support but they no longer support CS2 so are not able to help. They recommended that I try the Adbe Forum. All my Adobe products have been bought legitimately. I know people manage to use pirated Adobe software so there must be some way for me to activate a legally bought product.
Michael
Thank you for your email and suggestion.
I have tried that and the only product listed is my CS5 Design Premium (which was an upgrade), none of my previous Adobe products are listed.
I am now looking to see if I can buy an old version of Photoshop that will work on a Power PC G4 Mac with OS 10.4.
I only need Photoshop on that Mac to paint from, not the rest of the Suite.
It is infuriating that I already have a legitimately bought Adobe product (as all mine have been) but I am unable to use it.
Regards
Trevor -
I really need help with this! I have a valid Serial # for Adobe Acrobat XI and it shows on my account with Adobe. When I try to install on my new hard drive it says that the serial # is invalid.. I tried to install the free version to get me out of a jam and it keeps saying that it failed!!!! What can I do?
I am on Windows 7, and I was on Adobe.com. I went to downloads and clicked on Acrobat XI standard. It downloaded. But when I went to run it said Acrobat XI Pro and would not accept my serial number. I have done this now 4 times. I think that the system is downloading the wrong version. I am getting very frustrated and unhappy with Adobe!!!!
Sent from my iPad -
Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?
Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive. -
I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contacting you
Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =) -
Can I install a program on an External Hard Drive?
I have an 500 GB external hard drive that I attach to my MBP to store movies and my aperture picture libraries. When I first got it, I created three Mac OS Extended (journaled) partitions, one for movies, one for pictures and the other one for “extras”. I’d like to install Adobe Photoshop on my external hard drive, so I’d like to know if there is a way to make any one of my three partitions operate as if they were a system partition. Can I install an application in an external hard drive? Can I run an application from an external hard drive? Which formatting solution could help me achieve what I want? Is this even possible? Any suggestions?
There are many applications that are happy to be installed on a partition other than the boot partition. However, if the Adobe Photoshop installer does no present you with that option I wouldn't. You could always copy it across post-installation to see if it will work. Updating my present issues.
-
I have a 2007 Macbook Pro that is running 10.7.5 and I am trying to use a 10.6.3 DVD to install Snow Leopard to an external hard drive. I've followed every possible instruction on every which website. The problem is when I boot to Install disc, I am unable to choose which hard drive I'd like to install the OS on. It says that it is unable to Install and automatically takes me to Restore and suggests that I restore to Time Machine backups. Any and all help is appreciated.
lovinlife5959,
have you tried booting from the grey Mac OS X Install DVD that originally came in the box with your MacBook Pro? See if you can install its version of Mac OS X (either 10.4.9, 10.4.10, or 10.5.0, depending upon when it shipped from the factory) onto your external hard drive. If that works, boot from your external hard drive, run Software Update on it, and then try updating your external drive to 10.6.3 via the white Snow Leopard DVD. -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?
I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs! -
Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?
You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.) -
hi, i had to re install my itunes library from a hard drive to my new laptop. Now itunes thinks i am trying to add new albums and saying there isnt enoug space. should i restore or is there a better way.
Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable. -
How to install windows 8 onto an external hard drive connected with usb 2.0?
How to install windows 8 onto an external hard drive connected with usb 2.0?
Transfer win 8 from inside hd to external hd.
Cloning Win 8 is also OK.
Aomei Backupper can do the above.
In additional, Do you know Windows to Go?
http://www.disk-partition.com/features/windows-to-go-creator.html -
I want to use a new version of iLife (for iMovie and iDVD) but am currently running OS 10.4.11, which won't work with the newer iLife programs. Can i install OS 10.6.3 or 10.7 on an external hard drive, boot to that hard drive and work with the new software (installed on the external hard drive) using my MacBook Pro (circa 2005/6) as the engine while leaving my laptop running 104.11 the rest of the time?
Yes, you can use an external drive. To upgrade, however, means:
Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
Access the App Store with your Apple ID and purchase and download Lion.
Your computer must meet system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud. -
Installing OS X on a NEW hard drive
I just installed a new hard drive on the macbook pro. however, when i run the installation disk it never actually installes os x instead it trys to install the applications, but cant find the drive. How do I install OS X on a new hard drive? Thanks.
Hello,
The first thing you need to do is partition and format the drive.
From the OS X installation screen, go up to the menus at the top, and locate Disk Utility.
Launch Disk Utility.
Now, select your hard drive on the left.
Then, click on the Partitions Tab.
Now, choose the single partition option (unless you want to divide the drive for some reason). Then, give it a name.
Choose the format "Mac OS X Extended (Journaled).
Now, click on the button to partition the drive.
When it's done, exit Disk Utility.
Now, proceed with the installation. If it still won't see the hard drive, then re-start from the installation disk again and try it again. It should see the hard drive now and permit you to install on it.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question. -
I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?
If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
How to erase and install Snow Leopard 10.6
Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8
Maybe you are looking for
-
This is the second mac I've tried to install windows on. First one I tried for a total of about 40 hours and went to the apple store twice. They couldn't do it, so I finally just gave up. I concluded that even though it was a 2006 if wasn't late enou
-
No enter key or focus w/firefox
When testing with Firefox, my flash form doesn't allow the enter key or the scroll wheel to function. Not can I set focus on a particular field. That is, The field appears to be in focus, but the cursor is not set to that field. I have to click it fi
-
Anyway to add contact number into same box as contacts name in contacts list
With my Blackberry and steam driven Sony Ericcson it is possible to have a contacts number displayed underneath the contacts name in the main contacts list. Is this possible on iphone? or is there a contacts app anyone can reccomend which displays in
-
Sharing Music between iPods/iPhones?
Good Afternoon! So, here's the deal. My wife has an iPhone and my daughter has an iPod touch. They each have seperate Apple IDs. My daughter has purchased "tons" of music that my wife wants to have available on her iPhone, if possible. Is there any w
-
Final Cut For Mac os X PowerPC 10.4.11
Hello I am looking for Final Cut (Dosent matter Version or what kind of Final Cut) for Mac Os X PowerPC Version 10.4.11 is there any which I can buy Thanks PwN