Installed Apps (including Facebook) don't open after migrating to OS 3.0

All the apps i've personally installed (including Facebook) will not open/run post conversion to OS 3.0. do I need to reinstall them?

If some or most of your 3rd party apps crash when launching them after upgrading to 3.0, I have a fix that cured my problem. Another symptom is that you can delete the App, then reinstall and it works until syncing with iTunes.
Well my cure was to download any app, even a free one via iTunes, then sync with the iPhone. All was cured. I usually just download Apps straight from the iPhone, but the iTunes route worked.

Similar Messages

  • After iOS5 update apps blink and don't open and music content is gone and won't sync onto iPod

    After iOS5 update apps blink and don't open after trying to select them, and the music content was completely gone! Help!

    See the following:
    I updated my ipad 2 to ios5 and now apps won't open they just blink.  What should i do?
    Just updated iphone4 to ios5, now apps won't open, they blink once but won't run
    When you look at the storage usage of the iPod in iTunes (the colored bargraph) , how much is in the "other" category? If very large yu will have to restore you riPod to get it down to is normal less than about 1/2 GB.

  • Hi everyone, I've had problems with some apps on my iPad. The apps don't open after update

    How do I fix apps that don't open after update?

    Try a hard reset ie hold the power and home buttons simultaneously until the Apple logo appears (ignore the red slider). Are you still using iOS 4.3.3, as in your profile? A lot of apps now need an iOS of 6 or higher for the update to download.

  • TabPlus, new tabs, don't open after typing in website addresses

    I have used TabPlus (now called Tab Mix Plus) for years; I usually have quite a few tabs open; everything has worked perfectly until FF updated me to FF8, beta. Today, I tried to download & install version 8, newer than the Beta, but that did not help.
    Tab Plus' new tabs, don't open after typing in website addresses; the cursor line to type in the next letter or word remains, blinking. I cannot open anything in any new tab that I have added by pressing down with the right mouse button and clicking on "New Tab (after this tab)."
    As this problem did not exist in any version prior to 8, perhaps the developer has to do some updating. If not Firefox needs to fix some bug.
    I have been with Mozilla FF since its beginning; it has been by favorite browser, but now, out of frustration, I have been using Chrome.
    If you can solve this problem for me, I shall be happy to return FF to being my Default Browser.
    All the best,
    Carole (mhashev, my on-display name)

    Is there a way to control the webpage that new tabs start at?

  • I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

    I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

    The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions

  • I can open iTunes and app stores but don't open!!

    I can open iTunes and app stores but don't open!!

    Hi BarbiJ,
    Thanks for using Apple Support Communities.  I would recommend rebuilding the iPhoto library per this article:
    iPhoto 6 and later: Rebuilding the iPhoto library
    http://support.apple.com/kb/ht2638
    To rebuild the iPhoto library:
    Quit iPhoto if it is open.
    Hold down the Command and Option keys on the keyboard.
    Open iPhoto.
    Keep the keys held down until you are prompted to rebuild the library.
    A dialog will appear with rebuild options. Select the options you want to use.
    Click Rebuild to begin the rebuild process. This may take a few minutes to complete.
    Cheers,
    - Ari

  • How to retrieve ilife/iwork pre-installed apps on my iphone 6 plus after factory setting reset.

    How to retrieve ilife/iwork pre-installed apps on my iphone 6 plus after factory setting reset.

    Hello arielfernan24,
    You can access previously purchased or downloaded content by following the steps in this article:
    Download past purchases - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Online Archive folder can't be opened after migration into Exchang2013

    Online Archive folder can't be opened after migration from Exchaneg 2010 to Exchange 2013.
    Windows8.1 MS office 2013, Exchange 2013, Online mode
    error: Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance.
    Is there any solution about this issue?

    Select it and open the Info dialog. In the Sharing & Permissions section, you should have read & write access, and everyone (else) should have read access. If that's not the case, click the lock icon, authenticate, and make the necessary changes. Close the window and try again.

  • My apps don't open after updating

    HELP!! I updated my ipad before i slept and this morning, apps such as keynote, QuickOffice, and Wallpaper don't open. They appear for a split second after i tap on the icon and the screen returns to the menu of apps again. I can see them in the bottom toolbar, though... so does that mean that they're open but have some sort of malfunction?? HELP!!

    thanks! I got really ticked off and went to the nearest Mac shop and here's what we did: 1. made sure that my store account in my laptop was the same one that i'm using with the ipad. 2. tried to sync (but this failed). 3. downloaded some of the apps to the LAPTOP. 4. did a sync... AND IT WORKED!!!
    Thanks for the help, guys!

  • Facebook does not open after ios upgrade yesterday 3/12/14

    Upgrades ios 3/12/14 and now Facebook does not open.

    Genieo Adware is installed.  Removing it will help.
    If you have another browser installed, use it.
    If not, launch App store and get another  browser for temporary use.
    Remove it afterwards.
    1. Use  free  AdwareMedic by clicking “Download ” from here
        http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.

  • Apps Tabs get don't reload after closing the firefox

    I just today tried to use apps tab. I set some links as apps tab and then closed the firefox. When i stared it again the apps tab were not there anymore. However according to this release the apps tab should be retained even after closing the firefox

    Go to about:config (enter it in the address bar), and find '''browser.showQuitWarning''' and set it to '''true'''. This will make Firefox ask you each time if you want to save your session to restore the next time you open it, like in 3

  • Safari don't open after update

    Hi everyone .
    Simple problem :
    Safari won't open after updating it   to 5.1.7 via software update  
    I am on OSX  10.6.8
    It feels really odd to get this kind of issue after an update  
    This has happened before , the last version of Safari that worked on my system was Safari 5.03 .
    Any ideas someone ?

    Have you run UpdateOwa.PS1 ?? if not run it:
    Open Exchange Management Shell as administrator:
    1. You need to  navigate to Bin Folder or Scripts for Exchange 2010 Server which contains UpdateOwa.PS1 script and run it as below!
    2. .\UpdateOWA.PS1
    Check if this fixes your issue!
    Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
    question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

  • User online archive mailbox not opening after migration

    I have exchange server 2010. Currently migrating mailboxes from exchange 2010 to 2013 CU7.
    After migration, user able to open primary mailbox with no issue. 
    But archive they are not able to open, its showing not available.
    But after re configuring outlook profile, user able to access both primary and archive.
    But configuring profile for more than 4000 users, its very tough..
    Is there any way to achieve this automatically...
    thanks

    Hi,
    I notice that the version of current Outlook client is 14.0.6112.5000, Outlook 2010 needs to be on at least SP1 and have November 2012 update (14.0.6126.5000) at the minimum installed to be able to connect to Exchange 2013, so make sure your clients is patched.
    More details about "Patching Exchange? Don’t Overlook Outlook", for your reference:
    http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
    Best Regards,
    Allen Wang

  • IPhoto doesn't open after migration/upgrade

    I see several discussions similar to mine, but not exactly.
    I just migrated from a MacBookPro 10.6.8 to a Pro 10.8.2.
    My iPhoto was iPhoto 8, vers 7.1.5.
    After migration and upgrade my iPhoto is vers 9.4.1.
    When I try to open iPhoto I get the message that the library files must be upgraded.
    I downloaded and installed iPhotoLibraryUpgrade. When I try to run the program, it says:
    You library can open with the current version of iPhoto and does not need to be prepared with this tool.
    I have tried opening iphoto with the cmd-opt key, but nothing here will run.
    Get the same message: the files must be upgraded.
    I downloaded the libraryManager and tried to open the library "package" but an unable to.
    It's "untouchable".
    Please, any suggestions would be great as I sit here with no access to my iPhotos.

    With iPhoto Library Manager you need to run the Rebuild command not open the package.

  • Mail will not open after migration

    After migrating from a time machine backup the Mail app will no longer open and I get this error message:
    Process:         Mail [871]
    Path:            /Applications/Mail.app/Contents/MacOS/Mail
    Identifier:      com.apple.mail
    Version:         5.2 (1257)
    Build Info:      Mail-1257000000000000~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [128]
    Date/Time:       2012-02-23 21:00:00.593 -0800
    OS Version:      Mac OS X 10.7.3 (11D50)
    Report Version:  9
    Sleep/Wake UUID: E1834363-C4F8-41B3-A09E-EFB9AA2D3F1A
    Interval Since Last Report:          1787 sec
    Crashes Since Last Report:           6
    Per-App Crashes Since Last Report:   4
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Symbol not found: _OBJC_CLASS_$_NSObject
      Referenced from: /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeMediaBrowser
      Expected in: /usr/lib/libobjc.A.dylib
    in /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeMediaBrowser
    I deleted the everything within the V2 folder inside Mail.  But still got the message.  I have also tried extracting a copy of Mail from a working backup and running it from my desktop but no luck either.

    I have tried reinstalling. Next I reinstalled xCode. Then I reinstalled iLife from a DVD. I reinstalled the developer tools. Nothing has helped yet.
    The problem is that the variable _OBJC_CLASS_$_NSObject is missing from the /usr/lib/libobjc.A.dylib file.
    I even reinstalled the  /usr/lib/libobjc.A.dylib file from a backup when the Mail program worked but no luck.
    How do we get a  /usr/lib/libobjc.A.dylib file with the  _OBJC_CLASS_$_NSObject variable?
    [email protected]

Maybe you are looking for

  • No "Band" tab on Treo Pro settings

    Hi, I just received an unlocked Treo Pro, bought in the USA, two days ago. Since then Ive been trying all the settings and just making sure everything works as it should, and everything does except for the fact that I can't manually turn off 3G as th

  • IPod "cannot be updated.  The current file is in use."....how to fix?!

    I have a MacBook and the iPod Nano that came with it. I also have a 4G(I think) 20GB iPod. I have both configured to my Macbook, using only certain playlists to be updated on each iPod. I don't get any problems when I connect the 20GB iPod(w/ the Fir

  • Yoga 13 - Bluetooth issue

    Just wondering if anyone has encountered this problem: Occationally when waking the unit from sleep the Bluetooth device stops working. It appears in the Device manager with an "!" on it, but when I disable and re-enable it it works again for a day o

  • How can I make PSE open with a blank slate - nothing in the Projects Bin?

    When I open PSE 10, I want and expect a blank workspace. But when PSE opens, the last open file always appears, even  if I saved or closed it before closing PSE. I don't see any pref to correct this, and I shouldn't have to close a file before I can

  • How to add a sound on some slides?

    How to add a sound on some slides? Not only one slide and not all the slideshow? Is it possible? It must be!