Installed brushes don't work CS2

i put them in the brush folder, and inside the brush folder there is another folder called "adobe photoshop only" with some other brushes that came with it, i tried putting them in there too but still, they don't show up when i used the brush tool :(
am i missing something? the brush files are all .abr

You have to load them from the Flyout Arrow on the Brushes palette. If they are in the Brushes folder in Presets they should appear in the menu; just choose it. Otherwise you have to choose Load Brushes and navigate to their location.
Another way: just drag the .abr file into the work area.

Similar Messages

  • Element 11 program, never installed, serial # don't work

    Have a new Elements 11 program (never installed) purchased from Sam's. Took photo of serial numberI know it is correct. Spent hours today trying to install it on a windows 7 computer that has never had Elements on it. Elements repeated claimed the serial number was incorrect. It is the only number that came with the program. I tried to lift the label on the box for the number but there wasn't one. I can't retrieve it from Adobe since it has never been installed. I am out hours of my wasted time and the price of the program. I am more than MAD. I haven't found anyplace or way to contact Adobe directly. I was going to purchase Adobe Elements 12 for another new computer but don't want to waste more money on this garbage. WHAT WILL IT TAKE TO REACH REAL PEOPLE THAT CAN CORRECT THIS PROBLEM?????                   

    Normally the serial number will be on the disk case, not on the box.
    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
    https://redeem.licenses.adobe.com/getserial
    If you just purchased this from some retailer then you have every right to return it for a refund if it is not possible to use it.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Win 7 64bit   SP1 Install DVD don't work

    Hi everyone,
    i try to install windows 7 64bit + sp1(.iso downloaded from msdnaa) von my new iMac(21.5", Mid 2011). I downloaded the .iso from my windows notebook and copy it to my mac. Then i burn it with the preinstalled mac prog on a dvd. but when my mac restart and boot it cant find the dvd.
    file: windows system32 boot winload.exe
    status: 0 xc 0000001
    info: the selected entry could not be loaded beauce the application is issing or corrupt
    have anyone an idea? sorry for my english

    Magsus wrote:
    Hi everyone,
    i try to install windows 7 64bit + sp1(.iso downloaded from msdnaa) von my new iMac(21.5", Mid 2011). I downloaded the .iso from my windows notebook and copy it to my mac. Then i burn it with the preinstalled mac prog on a dvd. but when my mac restart and boot it cant find the dvd.
    file: windows system32 boot winload.exe
    status: 0 xc 0000001
    info: the selected entry could not be loaded beauce the application is issing or corrupt
    have anyone an idea? sorry for my english
    Burn it at 2X speed (minimum)

  • New instaled applications don´t work!!?

    i have downloaded some free applications to my Iphone 4S, all seemed ok.
    then next day after this,  suddenly stop working all previus app downloaded.
    it just blinks and nothing else.
    i have restared the phone, sync with itunes, but still only default app works.
    need some help.....!

    Yes. It appears your recording never completed properly.  Try recording again and make sure you record for a few minutes.  Make sure you allow public viewing in Adobe Connect Central.

  • The add-ons installed but don't work after upgrade to 3.6.13 Arabic

    All installed plugins

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

  • I need instructions on how to install Dreamweaver CS6 that work.  Can't install after repeated efforts.

    Can't Adobe mail me an installation disk if its online instructions to install Dreamweaver don't work?

    CS6 is in the CC App too, I figured it might have been one of those situations where someone is calling Dreamweaver "CS6" because that's the last version they were aware of.
    But if it's the actual perpetual license version...
    Download from the bottom of this page: https://helpx.adobe.com/download-install.html
    Install and enter your serial/activation number to disable the 30 day trial.
    If you already installed DWCS6 and it's just not working right, run the cleaner tool first to remove all traces of it: Download and Installation Help | Download and Installation Help
    Then download, install and activate as above.

  • Ringtones don't work iOS8

    I got the most recent update and all my ringtones, including the factory pre-installed ringtones, don't work or play when called or texted.

    Hi x_NINJA_,
    If you are getting no sound when your iPhone should be ringing for an incoming call I would suggest that you troubleshoot using the steps in this article - 
    iPhone: No ring or sound from built-in speaker
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Photoshop Liquify Brush Size increase/decrease with alt+crtl drag don't work anymore...

    Hi :-)
    I have installed the last Update to Photoshop CS6 13.0.4...
    Now I can't increase/decrease the Brush Size in the Liquify-Dialog anymore (before I installed the update, it works fine with alt+crtl and drag)...
    If I press alt+crtl, the "Cancel"-Button is shown as "Revert", but the Brush resizing don't work... :-/
    I use a Mac on OS X 10.6.8...
    But it seems it has to do with the system... beacause at home I use 10.8.3 and there works everything fine with the 13.0.4 Update!!!

    Files has been uploaded here:
    http://soloporhoy.1free.ws/test/soluperguei/index.php

  • Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

    Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)  --not able to use the Beats Speakers. Any software updates I need to install?
    This question was solved.
    View Solution.

    Hi Jim,
    You're welcome
    Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
    There is an alternative IDT Audio driver you may wish to try on the following link.
    http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
    Let me know if you get the same error with this version.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Buit in ethernet don't work after installing Lion

    Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
    Someone else has the same problem?
    On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
    Is there somebody who has te same problem and has a solution?

    Something does look odd to me unless it's a typo in your post.
    This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
    I work with a modem with te folowing preverences:
    Wan IP address    87.211.205.210
    Lan IP address     192.168.1.1
    Primery DNS server       62.58.50.5
    Secondary DNS server   62.58.50.6
    and a separate router Netgear WGT624v3
    This is not exactly what I would expect from System Preferences/Network
    the system preferences for the network are
    Configure       by DHCP
    IP address     192.168.1.15
    Subnetmask  255.255.255.0
    Router           192.168.5.1  <<<<<<<<<<< this should be 192.168.1.1??????
    DNS              208.67.222.222
                         208.67.220.220
    The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
    If this is not a type then this is a problem!
    Not sure how it got to be that way.
    Does it persist when resetting the modemand router?/
    Steve

  • Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

    card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
    Tried downloading this driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
    still dont work.

    Hi,
    Download and install the Chipset driver on the link below.
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
    After the installation has completed, restart the notebook.
    Next, download and install the Card Reader driver on the following link.
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Volume buttons don't work after installing ios 7.0.4

    I have an Iphone 4 (MC603B/A) and after installing IOS 7.0.4 the volume buttons and the mute switch don't work. Also, if I receive a call or a message I don't get any sound.
    There is no sound either if I play a video. At the same time, the alarm does work and the voice in the GPS works also.
    Any ideas on how to resolve this issue?
    Thanks

    I have exact the same problem as you! Soon I will go to an Apple Genius Bar. When I got the solution, I will tell you!

  • Error: SAP NW 7.01 ABAP Trial Version: install successfully but don't work

    Hi all,
    i'm newbie.
    i haved SAP NetWeaver 7.01 ABAP Trial Version on my notebook (Thinkpad X61 - Windows XP Pro) installed.
    I have made as follows:
    1- install MS Loopback Adapter
    2- add in windows/system32/drivers/etc/hosts: 10.10.0.10 <machine name>
    3- install SAP NetWeaver 7.01
    There aren't any error.
    If i start sapmmc, follow the syslog entry: "Communications data: Service initialization failed".
    i can connect with the server on SAP Logon. it does almost everything, also database is ok, i can create a table,... . but i can't program. i made a example programm, this programm is saved, program window does not appear and it does as if it is running, but it really depends. BAPI don't work.
    can someone help me, please ...
    Thanks
    Edited by: thi minh huyen pham on Jan 12, 2009 3:35 PM

    Hello Thi Minh,
    it looks you instaled everything ok. In trial version you can
    construct new structures, but not the tables, as we should
    use the tables of the flight data model.
    Propably your program is also running ok, as some reports are
    supposed only for debugging, and have not any results screen.
    Try other reports.
    Bye,
    Peter

  • Clean Install of Windows 8 & Some buttons Don't Work

    I bought this PC with dead Hard Drive. I installed new Drive and Windows 8 from USB.It only installed as 32bit OS and I know it should have been 64bit. Has 4Gb memory installed.Property screen shows:  4.00GB (2.97GB usable)(32bit OS, x64 Processor).   Some of my buttons Don't Work nor does my Microphone. I have tried verifying all drivers but none fix buttons. No errors listed in Device Manager. Any help is Appreciated.

    Wow that is so a "Canned" response. Can't install Windows7 on a system that never had 7. This unit was made originally for Vista. And even those do not have drivers I could use. Now if there were device manufacturer information you could give me about my unit then maybe I can get the buttons to work. The most important is the Microphone and Volume/mute buttons that need to work then you could help me.The Dell site will give you an exact biuld list when serial or Tag number is provided which help Identify device manufacturer so user can goto their site to get generic drivers to work with their Dell PC regardless of what version of OS is currently installed.So if you can really help here is the PC Info»HP TouchSmart IQ524 Desktop PC
    Serial Number:   3CR9240GJN
    Product Number:   NC701AA  

  • Satellite U400: Need Vista install order and Control buttons don't work

    I bought an Satellite U400-11T model with french windows Vista.
    I want to change the french Vista to hungarian Vista.
    Of course I bought a legal vista HUN and downloaded the drivers etc.
    I am interrested in about the install order called installation instruction like at the XP models.
    My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
    Where can I switch on it or wich program must i reinstall?
    Thanks
    Schmid

    Hi
    The installations order for Satellite U400 should be as follow:
    Windows Vista SP1
    Intel(R) Chipset Module
    Intel(R) Robson(Intel iMSM Driver)
    Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
    Conexant CX20561 Audio Driver
    Marvell 8040/8055 LAN Driver
    Synaptics Touch Pad Driver
    Alps Touch Pad Driver
    Conexant Modem Driver
    Netwaiting
    Modem Region Select Utility
    Wireless LAN Driver
    Chicony Camera Software
    Bluetooth Stack for Windows by Toshiba
    CIR Port Driver V7.1.62.2012
    TOSHIBA Value Added Package
    TOSHIBA Hardware Setup Utility
    TOSHIBA Supervisor Password
    TOSHIBA SD Memory Utilities
    Authentec AES1610 Fingerprint Utility
    TOSHIBA ConfigFree
    TOSHIBA WPS Library
    TOSHIBA Assist
    TOSHIBA Speech System
    TOSHIBA Extended Tiles for Windows Mobility Center
    TOSHIBA Remote Control Manager
    CD/DVD Drive Acoustic Silencer V2.02.00
    Toshiba HDD Protection
    TOSHIBA Face Recognition
    TOSHIBA TRS Driver
    Broadcom
    HDMI Control Manager
    Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
    Bye

Maybe you are looking for

  • User account performance and setup

    Hi, I have a MB Core Duo 2006 model (old I know!) and have tried using user accounts in the past, but have been concerned by the hit they may have on performance (my MB has been slowing down a lot recently). My wife and kids all use the same computer

  • When using Photoshop Elements 9 as external editor my iPhoto version does not update

    I am using Photoshop Elements 9 as an external editor in iPhoto V9.4.2 My photo's are Raw and they open in Elements fine for me to edit. When I go to save or exit I have problems. I get options to choose from - I am assuming that saving them as JPEG

  • Problem in starting weblogic server as proxy

    I am using weblogic server as Proxy to forward the requests to weblogic cluster. When i bring up the proxy, it works fine, but when i try to access the application deployed in cluster through Proxy, the proxy server crashes with the follwoing error.

  • How to freeze the selection column in the table control of the module pool.

    hi , in my module pool there is a row selection field  <b>w/selcolumn</b> of the table control called as mark. how to freeze the selection column where there is no record in the table control row. or in other words where wa is initial. thanks ekta

  • Spacing of x axis points on the graph

    how do I set the X axis values to be spaced correctly reletative to each value...currently if i have a values of "10,15,40,80,200" they appear equally spaced..not spaced relative to numerical difference