Installed Camtasia which wanted Soundflower and now line-input doesn't work

I installed the Camtasia demo which asked to install Soundflower to get the audio recording working, then I went to skype and my mic/headset (attached to the line-input) no longer worked. I've tried attaching different headsets to the same input, visiting System Preferences / Sound and tapping the mic, but nothing seems to fix it, and I haven't installed anything else, so it has to be Soundflower doing something to affect the line-input.
Has anyone else noticed this? Is there any easy fix?

Thanks, I've tried that but they haven't responded yet. I wondered if anyone on the apple forums had seen a similar problem...

Similar Messages

I just downloaded the updates and now my mail doesn't work. It says I now need a newer version of OS to allow I've to open my mail which I can't right now

I just downloaded the updates and now my mail doesn't work. It says I now need a newer version of OS to allow I've to open my mail which I can't right now

What version of the OS X are you running? Go to the Apple in the upper left corner and select About This Mac and report the Version back here.

I recently installed WIndows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

I recently installed Windows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

update your scanner's driver. ie, see if hp has a win 8 driver for that model.

I installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank

i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?

Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Updated to OS4 and now my phone doesn't work!!

Updated my phone to the new OS4 and now my phone doesn't work. It says I have to do a system restore for it to work. If I do a system restore won't that erase all of my photos? Is there anything I can do so I won't lose any of my infomation? I have tons of photos on my phone. If anyone could help me out, I would be grateful.
When I turn the phone on it shows a picture of the usb cable and the itunes logo. I don't want to do a system restore if I don't have to. I don't want to lose my pictures. HELP Please!!

That is one lesson we all have to learn. Backup. Did you backup your iphone regularly? If you did, your photos will backup with it and the restore will put it back on the phone. If you didn't, I am sorry to say that there is probably no way to get those precious moments back. I found that out the hard way years ago. I now learned to backup my computer and iphones at least once a month.

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.

Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?

Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

HT2513 I updated the operating system on my Macbook to Mavericks OSX 10.9 the other day and now my iCal doesn't work. It gets stuck "moving calendars to server account" and never recovers. What can I do?

I updated the operating system on my Macbook to Mavericks OSX 10.9 the other day and now my iCal doesn't work. It gets stuck "moving calendars to server account" and never recovers. What can I do?

So I do.
I quetioned it also in spanish but nobody answered yet.

I mashed the buttons and now my L200P doesn't work!

Hi guys,
I recently bought a second-hand ThinkVision L200P. I installed it behind a large sheet of glass, which seems to have had the unfortunate effect of pressing all the buttons at once for an extended period of time, and now my L200P doesn't display an image.
I opened up the L200P case (it's second hand) and took out the little 'button bar' PCB to make sure none of them were stuck in. By pressing the little switches on the PCB, I see the following behaviour:
Upon pressing the power button, I see the 'IBM Thinkpad' splashscreen for a moment, then it disappears. I think it used to then say 'Power Saving mode' but it doesn't anymore.
Upon presssing and holding the menu button for 10 seconds, I get the message 'Menu Locked'. If I press and hold for a further 10 seconds, I get 'Menu Unlocked'. The text is clear and bright green
None of the other buttons appear to do anything, even after pressing them many times and holding them for long periods
Powering on while holding 'left' and 'right' arrows does nothing
Holding 'right' arrow without any connectors in does nothing
My hunch is that mashing the buttons has somehow, say, turned down the brightness and contrast and locked the menu or something. But I don't know how to undo it.
What should be my next step? Like I said I've opened the case, so I'd be happy to 'hard reset' the unit by shorting a jumper or something.
Regards,
Richard.
Message Edited by kennardconsult on 08-04-2009 02:01 AM

Lcd screen are not consumer serviceable parts.......... it is not like a laptop. There is no hard reset in LCD monitors like you are suggesting. You would need a new PCB from somewhere, you could try to source a broken L200p and salvage that part, but other than that there is little you can do.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

I updated the new OS7.2 version, and now my iPad doesn't work at all.

I updated my iPad with OS7.2 version, and now my iPad is not working at all. The screen had a frozen iTunes icon with the diagram of the charging cord. I can't turn it on or off. What do I do?

You need to start iTunes on your computer and connect the iPad to the computer. Tis will allow you to go through the restore process. Be sure to update iTunes to version 11.1 before connecting your iPad.
Also see this Apple support page:
http://support.apple.com/kb/HT1808

I installed Firefox version 10.0 and now it is absolutely not working. What do I do to fix this?

I upgraded my firefox from 9.01 to 10.0 and now it is completely screwed up. When I click on the Firefox icon I get this message:
Error: Platform version '9.01' is not compatible with
minVersion > = 10.0
maxVersion < = 10.0
I use firefox on a Windows Vista every single day of my life, so for this not to work is a serious problem to me.
I tried completely uninstalling and reinstalling firefox, but that did not work.
Please help me figure this out.
Thank you so much
GG

If using Zone Alarm's browser virtualization or any other similar product or a sand-boxing program (i.e., Sandboxie), turn it off when updating Firefox or Firefox Add-ons. You can post on the forum for any such product that you might be using to get other instructions on the proper use of the product.
The updater wasn't able to update all the files and some were left as older versions. Do a clean reinstall. See: [http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update Browser will not start up - XUL Runner error after an update]
#Download a fresh Firefox copy and save the file to the desktop.
#*Firefox current version: http://www.mozilla.com/en-US/firefox/all.html
#Uninstall your current Firefox version.
#*'''''Do not remove personal data when you uninstall the current version'''''
#*Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
#*See [http://support.mozilla.org/en-US/kb/uninstalling+Firefox Uninstalling Firefox] '''''and''''' [http://kb.mozillazine.org/Uninstalling_firefox Uninstalling Firefox (Mozillazine)]
#*Also see: [http://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information] '''''and''''' [http://kb.mozillazine.org/Profile_backup Profile backup (Mozillazine)]
#Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
#*It is important to delete the Firefox program folder/directory to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
#*See: http://kb.mozillazine.org/Installation_directory
#Install the fresh copy of Firefox that you downloaded in step 1
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Upgraded to iTunes 11.0.5 and now Airport Express doesn't work

Just installed the iTunes 11.0.5 update and now I can't get my Airport Express to work. iTunes won't play and says it can't recognize the Airport Express device. Even when re-booted at both the iMac and the Airport Express - the link is broken. iTunes won't even play the media when the Airport Express is selected -- but the Apple TV and the Computer both work well. Never had this issue before the 11.0.5 update. Any thoughts or assistance?

Thank you very much for your reply. I did find 2 previous iTune libraries but they seem to be empty.
Your advice on back up is gratefully noted ... I always assumed Time Machine would do the job.
I guess like many people I've spoken to it's time to move away from Apple ...a declinig market may be the only thing which will make them realise they need to be more responsive to and respectaful of the millions of individuals who have been their loyal customers for many years.
My business has started moving to Windows and we have been surprised how good it is and products like Office 360 are fabulous in the business environment. We have heaps of iMacs ready for the scrap heap!
I am now looking for an alternative to iTunes. Not an easy feat but clearly there is a huge market opportunity out there for someone to produce a decent product. Any suggestions gratefully accepted.

Upgraded to iOS6 and now charging cable doesn't work

I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work. No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer. If I plug my iPad charger into it, it works fine. How can the new operating system determine what kind of usb charging cable it "wants" to accept? This charger and cable worked flawlessly before the OS upgrade.

Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!

Installed Camtasia which wanted Soundflower and now line-input doesn't work

Similar Messages

Maybe you are looking for