Installed digital camera raw update 3.8, but Aperture doesn't recognize Oly E-P3 raw files

I was excited to see that the digital camera raw compatibility update 3.8 purported to provide support for Olympus E-P3 raw files. I installed it from Software Update, and Aperture 3.1.3 (OSX 10.6.8) still showed the raw files as "unsupported". I restarted my Mac, got the same result. I downloaded and installed the standalone update, and again got the same result. Has anyone else had success with the update?

I found a solution. My E–P3 raw files still showed up as “unsupported” after reinstalling the update from the standalone updater. I discovered that selecting one of the “unsupported” raw files and having Aperture reprocess it (even though it had never been processed at all) made the file recognizable by Aperture and allowed me to make adjustments to it. I then reprocessed all of my E–P3 raw files and the only problem I have noted is that the vertical files were not auto rotated.
In reprocessing the raw files, I selected "only photos without adjustments" and "reprocess existing images". I hope this helps anyone who experienced this problem.

Similar Messages

  • I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files.  Additionally, repeated attempts to perform available updates have failed.  The laptop has Windows 8.1 64Bit.

    I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files.  Additionally, repeated attempts to perform available updates have failed.  The laptop has Windows 8.1 64Bit.

    I don't know who you talked to, but some of the support techs tend to look at CS5 as "no longer sold or supported" and usually don't want to mess with it.
    We are mostly user-volunteers and have time to help you out. Some of us get perks from Adobe, but we are not employees.
    I actually gave you the links to the two very important CS5 updates, but you want to peruse this general list Adobe - Photoshop : For Windows
    and get the Bridge CS5 updates as well. Adobe - Bridge : For Windows

  • Can't install Digital Camera Raw Compatibility Update 2.2

    Software Update wants to install Digital Camera Raw Compatibility Update 2.2, but it always fails, saying: "The update “Digital Camera Raw Compatibility Update” can’t be saved. You do not have appropriate access privileges. The Installer package has been moved to the Trash. To try again, open the package from the Finder."
    I've tried doing Repair Permissions in Disk Utility, but this has not helped. I'm using Mac OS X 10.5.5, all other recent updates have gone in fine.

    I had the same problem. Deleting the contents of the HD/library/Updates worked.
    Never the less I noticed that the permission set was different:
    Original permission set: admin R&W, admin R only, everyone R only.
    I also followed the Alias and found two files with the same permissions.
    Re-downloading (via software update) revealed a new permission set:
    (Me) R&W, Admin R&W, everyone Read only
    In both the alias and the two files downloaded. Note that (Me) denotes your user with administrator access.
    I believe that, since the update was downloaded automatically, the permissions were mismatched and instead of adding a system R&W privileges it added a second Admin Read only permission.
    Adding an administrator user with read and write permissions should solve the problem (as long as you authenticate as that particular administrator when prompted for intall authorization).
    Regards, Jaime.

  • Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

    I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
    All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
    I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
    I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

    I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

  • Can't Install Digital Camera Raw 3.6

    I am having problems installing Digital Camera Raw 3.6. During the install, I get the message "Digital Camera Raw Compatibility Update can't be installed on this disk. This update provides support for Aperture 3 and iPhoto 9 only".
    I purchased Aperture 3 from the Mac App store. In Aperture 3, Digital Camera Raw 3.4 is installed. Software Update does not recognize Digital Camera Raw needs to updated. Help!

    Ernie.......yes, the application is Aperture, Mac's photo-image software. I didn't specify as I thought I was posting in the Aperture Forum. I'm not very familiar with these forums, did I miss a step in clarifying my subject?
    Don

  • HT4757 I have installed the Raw update 3.12, but still couldn't import the D800 NEF files

    I installed the raw update 3.12, but still couldn't import the D800 raw files to Aperture & iPhoto.

    I found a solution. My E–P3 raw files still showed up as “unsupported” after reinstalling the update from the standalone updater. I discovered that selecting one of the “unsupported” raw files and having Aperture reprocess it (even though it had never been processed at all) made the file recognizable by Aperture and allowed me to make adjustments to it. I then reprocessed all of my E–P3 raw files and the only problem I have noted is that the vertical files were not auto rotated.
    In reprocessing the raw files, I selected "only photos without adjustments" and "reprocess existing images". I hope this helps anyone who experienced this problem.

  • Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected.  At least that happens with my camera.  Good luck.

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • I need to install the CC products on a new computer, but it doesn't recognizes my password even when I'm logged in

    I'm an Adobe CC member and need to install the CC products on a new computer. When I download CreativeCloudInstaller.dmg and I double click to install, it requires my password but it doesn't recognizes it even when I'm logged in. Somebody knows what happens?

    Yes! That's the correct answer, you genius! Problem resolved, thank you so
    much!
    2015-04-11 16:02 GMT-07:00 Ned Murphy <[email protected]>:
        I need to install the CC products on a new computer, but it doesn't
    recognizes my password even when I'm logged in  created by Ned Murphy
    <https://forums.adobe.com/people/Ned+Murphy> in *Creative Cloud Download
    & Install* - View the full discussion
    <https://forums.adobe.com/message/7429828#7429828>

  • Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

    I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

    If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
    Getting it running over wireless rather than USB might be worthwhile.
    Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
    Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

  • I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

    I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

    If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
    You can verify this by running the following command in OSX Terminal.
    diskutil cs list
    If you get any output, such volumes will not be visible.
    As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
    diskutil cs revert
    Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
    diskutil cs revert
    Usage:  diskutil coreStorage revert
            MountPoint|DiskIdentifier|DeviceNode|lvUUID
            [-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
    Convert a CoreStorage logical volume back to its native type.
    The file system must be mounted and resizable (i.e. Journaled HFS+).
    Ownership of the affected disk and a passphrase (if encrypted) is required.

  • I just purchased a Samsung DVD player with a USB port; says you can use a PC or player to play music; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod

    I just purchased a Samsung DVD player with a USB port; Samsung says you can use a PC or player to play music using the USB port; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod?  Or is there some ap?

    Skip the DVD player use an HDMI connection to your system.
    Use this http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a&fs =s%3Dalpha
    or for just Audio use the 3.5 MM jack.

  • I have firefox os 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what can i do?

    I have firefox OS x 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what else can i do?

    Application
    User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_5) AppleWebKit/536.28.10 (KHTML, like Gecko) Version/6.0.3 Safari/536.28.10
    Ok, how's this? and flashback isn't installed, what else?

  • Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

    The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

    You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
    See if another contact is marked as this is my card.

  • I just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
    But hey thanks for your help,

Maybe you are looking for