Installed drivers but still no sound

i have installed the sound drivers after i formatted my system...but still the system doesnt detect any sound device..i use windows xp...

Hi: Since you didn't provide the model # of the PC you are having problems with, it is difficult to determine why your sound isn't working. One reason may be that in addition to the specific hardware audio driver, you also need the Microsoft UAA Driver.

Similar Messages

  • Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

    Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

    Hello Dr.Help,
    Thank you for providing so much information about the issue you are experiencing with iTunes.  It sounds like you have tried reinstalling it, but nothing happens when you launch it.  I recommend following the steps in this article to resolve launch issues with iTunes:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

    How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

    Hi rsample,
    Thank you for visiting Apple Support Communities.
    Your symptoms make it sound like the iPhone side switch is set to silent mode.
    iOS: Understanding sounds, ringtones, and alerts
    Set your device to silent mode
    iPhone: Toggle the Ring/Silent switch on the side of the device.
    Best Regards,
    Nubz

  • I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can  any one help

    I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can  any one help

    try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

  • I have an iMovie that I created 10 years ago.  I found the disk and imported.  Everything is there except the sound!  I converted in Wondershare to MPV4 but still no sound.  There is an audio clip that was imported from an analog video camera.

    I have an iMovie that I created 10 years ago.  I found the disk and imported.  Everything is there except the sound!  I converted in Wondershare to MPV4 but still no sound.  There is an audio clip that was imported from an analog video camera.  Does anyone know how I can get the audio back?

    Whitelab Records wrote:
    So, 20 views and nobody's anybody the wiser?
    A small update to this issue....
    I have been trawling the forums to find an answer but to no avail...
    And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
    Same problems.....everything is audible in audition but nothing plays on playback.
    Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
    To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

  • HT202159 I bought the  UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged by you. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac P

    I bought the  UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged by you. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?

    Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!

  • I bought the  UnZipper, vV1.0.00 (4 ) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop

    I bought the  UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
    Mac Pro, Mac OS X (10.6.8)

    Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!

  • Drivers are all working but still no sound with windows 7

    I have a very frustrating sound issue. My sound has worked completely fine up until yesterday. When I booted up my computer, I realized that no sound came out. I've gone through many forums to find the solution and I've checked all the simple stuff like making sure that my devices are enabled, audio service enabled, reinstalled/upadated the sound drivers etc... I've even gone into BIOS and loaded default settings and still no sound. I've gotten to the point where I have no idea what else I can do. Help please!
    This question was solved.
    View Solution.

    Hello all, 
    I'm sorry that you are running into this issue of no sound. Do you get any sound through headphones?
    Also I would suggest trying a hard reset as the next quickest and less invasive step. This can sometimes fix strange issues because it drains all of the electricity out of the unit. Here are the steps for a Hard Reset.
    Hope this helps! Let me know the results if you get a chance

  • My ipad has no sounds. I tried everything that the internet community says but still no sounds even the apple technician where I bought it doesn't know why

    Pls need your help badly. I tried everything that internet community suggested but still I don't have any sounds... I tried contacting tech personnel where I bought it but even they can't resolve my problem.. Sometimes I here sounds for 5 mins then puff it goes off again... Hope you can help me..

    Hello bing5423,
    The following article provides steps that can help get your iPad powered on again.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Unload swf but still playing sound

    hi I have 10 swf's, i m displaying 1 swf for each question displaying 1 swf, but problem is i unload the swf and load the next question clip but old one is still playing sound..
    what is the solution//????

    There are a few things you'd want to do when unloading a SWF in AS3 - but the most important would be to tell your Loader object to unload. Specficially, unloadAndStop(). So if you used myLoader to load in the SWF file, then use myLoader.unloadAndStop();
    It's also a good idea to stop any audio or video that you have playing in the SWF file - but that all depends on how you have thinsg set up and are using the audio/video in the SWF.

  • I have just had a system update a safari 5.1.7 a security update 2012-200 and a app update and now when i go into a site with flash it says i do not have adobe flash.  I have installed it but still no luck?  any help would be much appreciated  Cheers Dave

    I have just had a system update.  Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash.  I have installed it from the site but still no luck?  any help would be much appreciated  Cheers Dave

    Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
    iPhotoPhotocast
    Java
    QuickTime
    WebKit built-in PDF

  • Uninstalled trail Pscc then install again but still no Ps cc app

    I installed trail Ps cc when i open it, it said some files missing need to reinstall then I uninstalled and install again 3 hours ago but still no Ps cc app on my Mac !!!
    is it still downloading and I need to wait or else but why it did not take this long when I first instal it this afternoon.whereas creative cloud app show below
    Thank you very in advance for for help and advice.

    Hi jjluvit,
    The uninstaller may not able to remove Photoshop completely from your machine. What is the Operating system you are using?
    If you are on MAC then try going to Applications--> Utilities--> Adobe Installers and try to run the uninstaller for Photoshop.
    For Windows go to Control Panel and then try to uninstall from Programs.
    Sign out of Creative cloud and sign in again.
    Once you sign in you should see Photoshop CC 2014 to install , try to install it from Creative cloud Desktop application.
    Thanks,
    Nikhil Gupta.

  • No audio output from my MacBook, but still chime sounds upon loading !

    Hi Guys,
    Basically my Mac all of a sudden started bugging out loading real slow, Generally lagging. So I held the the power button down for ten seconds for an emergency reboot. When everything loaded up again I couldn't get any sound from my Mac being no bleeps when when I'd toggle with the volume or any sound when listening to iTunes. HOWEVER.. The chime upon loading when turning on the Mac works and when I open up one of my projects in Logic Pro X the sound works in relation to playing the music I've worked on with my project but still if I toggle the volume there's still no sound along with iTunes, Youtube... Everything !
    Extremely strange and I'd really appreciate help with this please.
    Kind Regards,
    yungprince.

    Well, as you have problems with two machines add both machine's details following >>Posting Guide<< as already said.
    Reinstall in any case realtek audio: http://www.msi.com/service/download/driver-2584.html
    Quote
    My video card is an MSI GeForce 9800.
      Which?
    http://www.msi.com/service/search/?kw=n9800&type=product

  • Lexmark Optra S 1255 and mac 10.6.8--not working?  I have a 1284 cable, installed drivers, but it just swirls and states "printer offline"?  Anybody?  I really like this old laser printer.  thanks for looking

    1.  Hello
    2.  Problem with old laser printer and compatibility.
    3.  My computer is a iMac
    4.  running 10.6.8
    5.  printer:  Lexmark Optra S 1255
    6.  bought a IEEE 1284 printer cable
    7.  installed drivers
    8.  When I add the printer, it just swirls and state"printer offline"
    9.  Any advise would be greatly appreciated?

    Explain #8.
    Did you restart after adding the drivers?
    If you open the System Profiler, under Firewire or Printers what do yo see?
    (Apple Menu/About this Mac/More Info/Firewire or Printer)
    If it sees them then you know it's a configuration problem.

  • Bridge NOT RESPONDING... re installed PS but still not responding... any Ideas??? (Windows, 64 bit)

    adobe bridge is not responding. All other programs from Suite are fine. When I click on anything in the bridge it immediately says NOT RESPONDING> I re installed PS but it did not help...???

    Hey glennboyes,
    Thanks for the question. I understand you are experiencing issues with connecting to the iTunes Store. The following articles may help to resolve your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 3000" through "3999"
    Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

Maybe you are looking for