Installed Ensoniq AudioPCI SB32 - now I cannot play multiple sounds simultaneou

I started with an el-cheapo on-board sound card (SiS 708). I just installed a Creative Ensoniq AudioPCI SB32 and can no longer play multiple sounds simultaneously.
For example: if I am playing an MP3, WAV, or otherwise an audio file that uses the sound card's WAV output, other sounds such as the Windows event sounds or sounds assigned in my FTP application. I *could* do this without a problem using the SiS 708 card.
More info:
- I did leave the SiS 708 installed. Could this be conflicting?
- I set the default I/O sound devices to the Creative Ensoniq in the control panel
How can I play multiple simultaneous audio again?Message Edited by epp_b on 0-07-2006 07:48 PM

I have tried the following things:
- Uninstalling and disabling the onboard sound
- Installing the latest version of DirectX
I can't think of anything else (there are no updated Creative drivers that I can find)

Similar Messages

Installed latest version of iTunes, now I cannot play music through my Airport express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed.

Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!

I have the same problem - did you solve it?

HT1222 I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!!!!!!

I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!

Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

Installed latest update and now i cannot get itunes to load

installed latest update and now i cannot get itunes to load

I was having major problems too. I ended up completely uninstalling itunes then downloaded it again from http://www.apple.com/itunes/. If you're using firefox, for some reason itunes will not download and I don't know if using googlechrome will also have problems,so just to be sure that it will work on your first try, use internet explorer when you download itunes. Hope this helps...

HT1349 I downloaded the latest version of iTunes and now I cannot play the songs in order, they skip around randomly. The shuffle feature is off. All I really want to do is play an album from start to finish.

I downloaded the latest version of iTunes and now I cannot play the songs in order. It will skip around or just stop playing the song currently playing when it is finished. I just want to play an album from start to finish. The shuffle feature is turned off.

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

I lost my music stored in my computer. I originally bought these from I Tunes. Now I cannot play because it cannot find music file. How do I download from I Tunes again?

I lost my music stored in my computer. I originally bought these from I Tunes. Now I cannot play because it cannot find music file. How do I download from I Tunes again?

Hey MHallon,
Thanks for the question. I understand that you need to redownload previously purchased content from the iTunes Store. The following resource should assist you in doing so:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks,
Matt M.

I purchased a song, now I cannot play it anymore 'cause I cannot locate it on my pc.

I purchased a song,now I cannot play it anymore 'cause I cannot locate it on my pc. THE esclamation mark is on the side... I want to know can I redownloaded for free???
Thanks

Delete and redownload them if doing so is free in your country.
(107559)

Upgraded my iTunes now I cannot play videos

Upgraded my iTunes now I cannot play videos. Getting no help from Apple Support. Apple should change its name to Microsoft.

Are you getting an "iTunes has stopped working" message when you try to play the videos?
If so, try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I am trying to put sound fonts into a playable format in garageband. I followed all of the instructions on the sound font help page for Garageband, but I still cannot play the sounds, or get them to show up. Any suggestions?

I am trying to put sound fonts into a playable format in garageband. I followed all of the instructions on the sound font help page for Garageband, but I still cannot play the sounds, or get them to show up. Any suggestions?

Sorry, I was confused by your profile signature showing "GarageBand (Mac) '11".
It is very similar in the newest GarageBand 10.0.2:
Enable Audio Units in the GarageBand Preferences > Audio/Midi.
Create a software instrument track.
Show the Smart Controls and click the button.
In the Info panel scroll, to make the Audio Units brick visible and click the "Instrument" control. Select "AuInstrument > Apple > DLSMusicDevice" and click it, to open the settings.
This should show you a panel, where you can select a Sound Bank. Does that show your sound font?

Hi...I just download IOS 7.1 in my iphon 4s. Now I cannot mute camera sound. Even I was slip down the mute switch. So can u please let me know what I want to do?

Hi...
I just download IOS 7.1 in my iphon 4s. Now I cannot mute camera sound. Even I was slip down the mute switch. So can u please let me know what I want to do?

In some countries, this cannot be overridden.

Lost the ability to play multiple sounds!

Since switching to archlinux, the only problem that I am unable solve is the inablity to play multiple sounds.. i had this problem when i first installed archlinux. back then i tried installing pulseaudio and found that cumbersome. eventually went back to alsa and found magically i could play sounds at once..
now again it has reoccurred ever since the module init tools upgrade. i have tried reconfiguring alsa with alsaconf with no avail.
on trying to play sound file from the 2nd app i get a knotif saying
The audio playback device HDA Intel (ALC880 Analog) does not work
Falling back to .
some of the conf files i have:
[$]> grep MODULES /etc/rc.conf
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MODULES=(e100 mii slhc snd-hda-intel snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd soundcore !snd-pcsp)
[$]> grep DAEMONS /etc/rc.conf
# DAEMONS
DAEMONS=(syslog-ng dbus @network netfs crond alsa hal cups @openntpd)
[$]> cat /etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
[$]> cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
[$]> cat /etc/libao.conf
default_driver=alsa10
[$]> lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)

djszapi wrote:It seems to good. Did you try pulseaudio now too ?
no i dont want to. it doesn't seem right with kde

Play multiple sounds

Hello!
How can I play multiple sounds at once please?
I tried with 2 separate soundChannel vars but they still override eachother.
Thanks

play both sounds through the same sound channel? eg:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
    <mx:Script>
        <![CDATA[
            private var sound:Sound;
            private var soundChannel:SoundChannel;
            private function play1():void
                sound = new Sound();
                sound.load(new URLRequest("sounds/1.mp3"));
                sound.addEventListener(Event.COMPLETE, songLoaded);
            private function play2():void
                sound = new Sound();
                sound.load(new URLRequest("sounds/2.mp3"));
                sound.addEventListener(Event.COMPLETE, songLoaded);
            private function songLoaded(e:Event):void
                try
                    sound.removeEventListener(Event.COMPLETE, songLoaded);
                    soundChannel = sound.play(0);
                catch(err:Error)
                    trace(err)
        ]]>
    </mx:Script>
    <mx:Button x="140" y="313" label="Play sound 1" click="play1()"/>
    <mx:Button x="229" y="326" label="Play sound 2" click="play2()"/>
</mx:Application>

Loading and Playing Multiple Sounds

I have written a loadSound function which handles loading and playing multiple sounds. This function works fine when I call this function in another keyframe i.e. the frame in which the function is not written. But when I call the function on the same frame in which the function is written the sounds gets mixed up. For example the function is written in 1st keyframe. If I call this function in 2nd, 3rd and 4th keyframe (with different sounds) it works fine. But when i call the same function in 1st, 2nd and 3rd keyframe it all gets messed up.
In 1st keyframe the sound plays properly. When I move to 2nd Keyframe the 2nd sound plays. But when I move back to the 1st keyframe the 2nd and 1st keyframe sounds all get mixed up. This doesn't happen when I call the function in 2nd, 3rd and 4th keyframes.
Below is my function:
import flash.events.Event;
import flash.media.Sound;
import flash.net.URLRequest;
import flash.events.ProgressEvent;
import flash.events.IOErrorEvent;
import flash.errors.IOError;
import flash.media.SoundChannel;
import flash.media.SoundMixer;
import flash.events.TimerEvent;
import flash.utils.Timer;
import flash.display.MovieClip;
import flash.media.SoundTransform;
stop();
var s:Sound;
var localSound:SoundChannel = new SoundChannel();
var req:URLRequest;
var loadedPct:uint;
var currentFrameArr:Array = ["One","Two","Three"];
var urlArr:Array = ["sound/m01_t01_s01.mp3","sound/m01_t01_s02.mp3","sound/page10_11.mp3"];
function loadSnd(currentFrm:String)
s = new Sound();
s.addEventListener(ProgressEvent.PROGRESS, onSoundProgress);
s.addEventListener(Event.COMPLETE, onSoundLoaded);
s.addEventListener(IOErrorEvent.IO_ERROR, onIOError);
localSound.stop();
for (var i:uint=0; i<currentFrameArr.length; i++)
if (currentFrm == currentFrameArr[i])
req = new URLRequest(urlArr[i]);
s.load(req);
function onSoundProgress(evt:ProgressEvent):void
loadedPct = Math.round(100 * (evt.bytesLoaded / evt.bytesTotal));
trace("The sound is " + loadedPct + " % loaded");
function onSoundLoaded(evt:Event):void
localSound = s.play();
function onIOError(evt:IOErrorEvent):void
trace("The sound could not be loaded: " + evt.text);
Call to this function in different frames:
loadSnd("One");
loadSnd("Two");
etc
If I pass the parameter 'One' in loadSnd it plays the 1st element in urlArray, 'Two' 2nd element and so on.
I have been scratching my head since long over this.
Can anybody please pinpoint the error.

Got the solution. The SoundMixer.stopAll(); statement did the trick. The complete workable function is pasted below:
import flash.events.Event;
import flash.media.Sound;
import flash.net.URLRequest;
import flash.events.ProgressEvent;
import flash.events.IOErrorEvent;
import flash.errors.IOError;
import flash.media.SoundChannel;
import flash.media.SoundMixer;
import flash.events.TimerEvent;
import flash.utils.Timer;
import flash.display.MovieClip;
import flash.media.SoundTransform;
stop();
var s:Sound;
var localSound:SoundChannel = new SoundChannel();
var req:URLRequest;
var loadedPct:uint;
var currentFrameArr:Array = ["One","Two","Three"];
var urlArr:Array = ["sound/m01_t01_s01.mp3","sound/m01_t01_s02.mp3","sound/page10_11.mp3"];
function loadSnd(currentFrm:String)
s = new Sound();
s.addEventListener(ProgressEvent.PROGRESS, onSoundProgress);
s.addEventListener(Event.COMPLETE, onSoundLoaded);
s.addEventListener(IOErrorEvent.IO_ERROR, onIOError);
SoundMixer.stopAll();
localSound.stop();
for (var i:uint=0; i<currentFrameArr.length; i++)
if (currentFrm == currentFrameArr[i])
req = new URLRequest(urlArr[i]);
break;
s.load(req);
function onSoundProgress(evt:ProgressEvent):void
loadedPct = Math.round(100 * (evt.bytesLoaded / evt.bytesTotal));
trace("The sound is " + loadedPct + " % loaded");
function onSoundLoaded(evt:Event):void
localSound = s.play();
function onIOError(evt:IOErrorEvent):void
trace("The sound could not be loaded: " + evt.text);
Calling the function
loadSnd("One");
loadSnd("Two"); etc

HT201272 Eversince I updated the Bejeweled Blitz on my 3G iPod, The game kept crashing so I deleted & re-installed the app, now I cannot play this game on my ipod anymore as the new version is made for 4G ISO! Please fix this & make it compatible with all

Ever since I updated the Bejeweled Blitz on my 3G iPod, The game kept crashing so I deleted & re-installed it.
Sadly, I now can't play the game on my iPod anymore because new version is compatible with the 4G & iSo or higher only.
What should I do to get my purchased game back?
Please fix this problem ASAP!
Thank you.

Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

I have had my Ipod touch 4th gen for 2+ years and was working fine until I upgraded to ios 6.1.3. Now I cannot play games and most of my apps keep crashing.

My ipod was working just fine for the past 2 years and ever since upgrading to ios 6.1.3, i simply cannot play games or anymore such as Subway surfers, carrot fantasy, 4 pics 1 word, etc. I also noticed that i had 1.2 GB of free space on ios 5.1.1 but then decreased to 900+ MB after "upgrading" to ios 6.1.3. I then deleted one of my space-hungry apps (the sims freeplay) to clear up some space and now have 1.6 GB of free memory. Just a thought, could apple have purposely done this with their software update to actually make an older, phased-out product such as my ipod touch 4th gen work worse than it has in its previous versions of softwares to force you to scrap it for a newer product?

- Double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- iOS: Troubleshooting applications purchased from the App Store
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Installed Ensoniq AudioPCI SB32 - now I cannot play multiple sounds simultaneou

Similar Messages

Maybe you are looking for