Installed FF 33.0, & now embedded images and videos on websites are blank. How fix? How roll-back to 32.0.3?

I installed FF 33.0, and "OpenH264 Video Codec by Cisco Systems, Inc. 1.1" plug-in installed itself automatically. Did that cause this problem? I set it to "Never Activate," which seems to have disabled it, but the problem persists. Do I need H264 for any reason? If not, can I uninstall it, and if so, how? Also, how do I revert FF to a previous verson? V. 33.0 seems to have caused this problem, whether it's due to H264 codec or something else in this version. There seems to be some incompatiblity somehow that wasn't there before -- what can I do to fix this?

Are they blank or black? If they are black I would recommend disabling hardware acceleration. [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
This does not cause an issue, it adds to the variety of codec types Firefox can render.

Similar Messages

Many images and buttons on websites are not visible and appear as white space.

i am unable to see buttons such as the "buy now" button, but when i scroll over the white space, the cursor changes to alert me that i've found the button. also, websites i frequent are now missing images and logos on this computer. i am windows XP pro, firefox browser. thanks for any assistance.

-> click '''Firefox''' button and click '''Options''' -> Content panel -> place Checkmark on '''Load Images Automatically''' -> click '''Exceptions...''' button and click '''Remove All''' -> Now type the address of websites on which you want Images to appear e.g. '''msn.com''' , '''yahoo.com''' , '''google.com''' , etc. -> click '''Allow''' for each, One by One -> click Close - > click OK on Options window -> Restart Firefox
-> Go to your concerned websites
* Right-click empty space within the page and click '''View Page Info'''
* In the '''Page Info''' window, select the '''Media''' panel and Remove Checkmark from '''Block Images'''
* In the '''Page Info''' window, select the '''Permissions''' panel
* Under '''Load Images''', Change the setting to '''Allow'''
* Under '''Set Cookies''', place Checkmark on '''Use Default''' and Change the setting to '''Allow'''
* Close the Page Info window
Also see this - Images or Animations do not show
* https://support.mozilla.com/en-US/kb/Images%20or%20animations%20do%20not%20show
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Check and tell if its working.

Kids playing with computer, now the icons and menu bar fonts are huge, how do I change it back? I tried in the view, but it didnt work.

anyone know how to change font size of menu bar and icons

Have you tried Command - (that's the key to the right of 0)?
If that isn't it try Control - Command - down arrow key. You can turn the zoom feature on and off in System Preferences - Universal Access - Seeing.

I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

Transferring images and videos from Nokia 5800 to ...

Hello,
I have been using Nokia PC Suite for years and now decided to jump onto OVI suite because the Nokia PC Suite was not able (mysteriously) to move picture and videos to my pc using USB cable. I gave up and started using OVI suite, which (how bizarre) can transfer images and videos to PC via cable connection with no problem.
I was used to transfering and deleting all that stuff once copies were made to my PC... please correct me if I am wrong ... does OVI allow to do so automatically? I mean deleting the images and videos from the phone when transfer completed? Now my phone's memory and external card are full and I am not sure what I should do.
Thank you in advance for the help.
Cheers.

JESZ wrote:
You know I have being facing the same problems, first when I installed the first version, and is quit the same with the new version of ovi suite. in a 14 G memory card with more than 10 g of free space, the ovi suite do not want to transfer my music. This is a mass!!! I'm very disappointed.
First of all..the Problems are not SAME but totally different..
BTW how are you transferring the Music ? and is it showing any error / message ?
You may try this..(if doing some other way though..). Open OVI Suite and select Music.. Goto File-->Add File to collection and select the file (song) you want to transfer..It will now get displayed in the OVI Suite..Now, connect your phone to PC.. and simply Drag-and-Drop the dislayed file onto the Phone Icon (Bottom - Left Window..) ..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Images and video not loading after bridge

Hi guys. I followed this guide to put the NVG589 into bridge/passthough mode so I can use my Netgear N600 WNDR3700v2 router. Everything seems to be working fine, except with Facebook, Youtube and a few other sites. Images and video take forever to load (if at all). Everything I have read online suggests either changing to the Google DNS or turning IPv6 off. I am already using Google DNS and I already had IPv6 turned off on the Netgear. I have now turned IPv6 off in the NVG589 as well, yet the problem persists. As we have 30 days to test run AT&T interent, I still have my cable interent active (Suddenlink), so I can plug in the cable modem (SB6121), and everthing loads quickly on Facebook and Youtube. I plug in the NVG589, still not loading...so it's defintley something to do with the settings in the NVG589. Any idea? Thanks in advance.

Hi ,
I am sorry about the issues you are having with your U-verse service loading certain sites, but I will be glad to help. Are you having issues when it is not in bridge mode? Try resetting the U-verse gateway, and just connecting your Netgear to see if you are having the same problem. If so, try doing a direct connection to the gateway without the Netgear to see if the problem still persists.
Let us know how it goes.
-David T

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

How to add a 'Download' feature in image and video gallery?

Hello,
I have created an image gallery on one screen and placed few videos on another screen.
Now, I want to add a download feature in photos & footages both.
Does anyone know how so I do that?
Prompt response will be highly appreciated.
Thanks in advance.
Jay

Hi,
Could you please provide additional information on what you mean by Download feature ? Where do you want to download these images and video from ?
Olivier

I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-instal

I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?

When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available.

Load image and video dynamically...

Hello. Can I make a "Browse..." button in a "Settings" slide (at the beginning of the presentation), to point my presentation to a certain photo (one photo) and video (one video) files from a HDD? I want to use those files in one of next slides... Thank You!

I was able to create a file with 2 buttons that will upload image and video separatly and it works fine.
But what I want is there is a 3rd button for submitting the selected files, right now the files are uploaded as soon they are selected and the browse window is closed..
How do I get to upload the selected files only when the SUBMIT button is clicked. Please help.
var imageTypes:FileFilter = new FileFilter("Images (*.jpg, *.jpeg, *.gif, *.png)", "*.jpg; *.jpeg; *.gif; *.png");
// Assign the document types filter
var videoTypes:FileFilter = new FileFilter("Flash Movies (*.avi, *.flv, *.mov, *.swf)", "*.swf");
// Add both filter types to an array
var imgTypes:Array = new Array(imageTypes);
var vdoTypes:Array = new Array(videoTypes);
upload_image.addEventListener(MouseEvent.CLICK, browseImage);
upload_vdo.addEventListener(MouseEvent.CLICK, browseVdo);
var fileRefList:FileReferenceList = new FileReferenceList();
function browseImage(event:MouseEvent):void {
    fileRefList.browse(imgTypes);
    fileRefList.addEventListener(Event.SELECT, selectHandler);
function browseVdo(event:MouseEvent):void {
    fileRefList.browse(vdoTypes);
    fileRefList.addEventListener(Event.SELECT, selectHandler);
function selectHandler(event:Event):void
    var request:URLRequest = new URLRequest("fileUploadScript.php");
    var file:FileReference;
    var files:FileReferenceList = FileReferenceList(event.target);
    var selectedFileArray:Array = files.fileList;
    for (var i:uint = 0; i < selectedFileArray.length; i++)
        file = FileReference(selectedFileArray[i]);
        file.addEventListener(Event.COMPLETE, completeHandler);
        try
            file.upload(request);
        catch (error:Error)
            trace("Unable to upload files.");
function completeHandler(event:Event):void
    trace("uploaded");

Load external images and video in edge

Hi.
I am looking into edge instead of flash.
My question is how do you load external images and videos from an external server?
To clarify, I need to insert a link from where the images can load into the stage, so they don´t take up any of the final weight.
Thanks in advance.
Best,
Stig.

The above solution I provided works if you already have the images in your composition and than if you want form load images from another server rather than the relative location to your html file.
Now if you want to load images dynamically into a rectagle containter you will have to code it.
below is a sample for that
Create a 'rectangle' with name 'Rectagle'.
Add the snippet in the compositon ready or on other user actiosn based on your requirement
var myImagetag = '<img src="http://wwwimages.adobe.com/include/style/default/SiteHeader/logo-2x.png">'
sym.$("Rectangle").append(myImagetag);

I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?

I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?

What version of Photoshop are you running?
I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
see image below for example:

C5-00 Images and Video Rotated

Hi there,
I am having this irritating problem. I bought the Nokia C5-00 just yesterdday, everything was okay, Somehow, not sure, if I pressed some combination of keys and as a result, the images an my Images and Video folder are now LEFT SIDE UP and RIGHT SIDE DOWN! So, I need to rotate my phone to view pictures. Please help how I can get back my original view of the images, like I don't have to rotate my phone to view a picture. I tried restore to factory settings, but did not help!
Thanks in advance.
Solved!
Go to Solution.

Hi Worldwar,
Thanks for your post and welcome to the Nokia forum.
We are really sorry for this inconvenience.
In order to fix this issue, I would advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345.
If the problem persists, I would suggest you to perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad. Default lock code is 12345.
The hard reset will dellete all your personal information, that's why a back up is very important.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
Hope this helps.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

How do i blend image and video on premier?

Hello Everyone
I'm trying to add a video onto an image on Premier. I want the image to be still and the video to play in the background. How do I make an image and video blend together in Premier?
Any tips/effects to make this look more interesting? for my project I'm trying to add a disturbing footage from the news onto a landscape photograph.
I'm using pro 5 on an Imac
Thanks in advance

Video on track one. Image on track two. Use the motion property to locate and size the image.

Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
Do I need to point iPhoto to this new location?
Thanks!

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
Assuming a Managed Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Installed FF 33.0, & now embedded images and videos on websites are blank. How fix? How roll-back to 32.0.3?

Similar Messages

Maybe you are looking for