Installed FF4 and now my TouchPad no loner works, how do I fix this?

I installed FF 4 on my Lenovo ThinkPad T61 and now my TouchPad & TouchPoint cannot be used to scroll web pages (they do however work on other programs). I installed the latest driver for the TouchPad & TouchPoint but it did not fix the problem. I also restarted FF in safe mode with Add-on disabled and this did not help either. I can scroll using the arrow key or with the curser, but it's VERY annoying not being able to use the TouchPad & TouchPoint. How can I fix this?

Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
Regards.

Similar Messages

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

TS3274 i dropped my ipad and now i have a "green screen" how do i fix this?

i dropped my ipad and now i have a "green screen" how do i fix this?

If it's an iPad 2, it's old enough to be out of warranty. Courcoul's suggestion to trade it in for a new one is ok if you are in the market. If not and you want to take a risk - and possibly a big one at that - others have reported a pretty extreme solution to this problem. Slap it on the back.
I know, I know. It's sounds crazy, but there are several threads here claiming it works.
Here is just one of them. You can do a search to find others.

I upgraded my mac to os x mavericks and now I have no sidebars. How do I fix this?

I upgraded my mac to os x mavericks and now I have no sidebars. How do I fix this?

Open General preferences in System Preferences. Make you sidebar selection via the option buttons.

Hey my lock screen button and home button jammed it doesnt work.How can I fix this problem.But first of all I live in Turkey.But my Iphone 4 is bought from apple store victoria gardens CA.Do I have warranty in Turkey ?

Hey my lock screen button and home button jammed it doesnt work.How can I fix this problem.But first of all I live in Turkey.But my Iphone 4 is bought from apple store victoria gardens CA.Do I have warranty in Turkey ?

The warranty is only good in the country of purchase.

Trying to download Lightroom onto a new iMAC and my serial code isn't working - how do I fix this?

Trying to download Lightroom onto a new iMAC and my serial code isn't working - how do I fix this?

What does "isn't working" actually mean? Any error message?

I have a 9300 and the track ball is not working how do i fix this?

I have a 9300 and the trackball is not working how do I fix this?

Hi THL1234
Welcome to Support Forums
You can try this KB and see if that helps in resolving your problem.If that fails then you may have to replace your Trackball :
KB29640 : Trackpad ,trackball, or keyboard not working on a BlackBerry Smartphone.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

If two iphones were updated using the same apple id and now are receiving the same messages, how do i fix this?

Hey guys. So i recently downloaded ios7 for my iphone 4s and so did my mom. But my mom decided to update her phone as well using the same apple id. Now she is recieving all of my messages instead of me. Please let me know how I could fix this. Thank you.

Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

My Safari did updates and now it will not open. How do I fix this?

My computer did updates about a week ago and ever since then the internet will not open. It says it downloaded safari 5.1.1, when I try to open safari it comes up with a message saying the community toolbar does not support the version I am using.
How do I fix this so that I can have internet?

This may help you What you can do if Safari quits unexpectedly

I have calibrated with spyder4elite and now my blacks are tinted red, how do I fix this?

I have been using spyder4elite to calibrate my iMac monitor and until now the black and whites have been fine, but now my blacks are tinted red. Does anyone know what I might have done wrong? I recently purged my cache - could that have changed something? How can I fix it now?
Thanks in advance if anyone can help me.
Jano

Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
Regards.

TS1702 I have three apps that I tried to update and now they are stuck in waiting how do I fix this

I have three apps that I tried to update and now they are frozen any ideas on how I can fix this

You can try any or all of these suggestions that have worked for others in the past .... But ... YMMV.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

I am trying to open a program I downloaded and it says compileBot has stopped working how can I fix this

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/919962]]</blockquote>
I have a program called commission killer that I have downloaded and I can't open it because it says compileBot has stopped working. It then tells me to either close the program or have Windows look for a solution and then it closes without any solution. I want to be able to use this program and yet I don't know what to do to correct this. I have deleted it closed the firewall and the security program AVG but that didn't work either when I redownloaded the program. Any suggestions>?

you need a newer version of pages to open this document

I have a pavilion dv4 and my internal microphone is not working. how do i fix this. thanks

I have a pavilion dv4 and the internal microphone is not working. I believe I had it working for 1 time but can;t figure it out. please help. thanks

Hi,
Please check it using these steps:
1. Right click the iocon speaker (bootom right hand side)
2. Select "Recording Devices"
3. Enable the microphone
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files and now Safari will not open. How do I fix this?

Hi,
In a stupid attempt to "fix" my computer, I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files (one was a .png and the other was a .xls).
I followed these steps:
Manual Removal Instructions
1. Run the following command in Terminal:
defaults read /Applications/Safari.app/Contents/Info LSEnvironment
2. Take note of the value, DYLD_INSERT_LIBRARIES
3. Proceed to step 8 if you got the following error message:
"The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist"
4. Otherwise, run the following command in Terminal:
grep -a -o '__ldpath__[ -~]*' %path_obtained_in_step2%
5. Take note of the value after "__ldpath__"
6. Run the following commands in Terminal (first make sure there is only one entry, from step 2):
sudo defaults delete /Applications/Safari.app/Contents/Info LSEnvironment
sudo chmod 644 /Applications/Safari.app/Contents/Info.plist
7. Delete the files obtained in steps 2 and 5
8. Run the following command in Terminal:
defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES
9. Take note of the result. Your system is already clean of this variant if you got an error message similar to the following:
"The domain/default pair of (/Users/joe/.MacOSX/environment, DYLD_INSERT_LIBRARIES) does not exist"
Is there a way to update my db to not look for this or did I remove something crucial to the functioning of Safari? I feel like an idiot.
Thanks for any help.
Sincerely,
Sterling MacNay

You installed a variant of what’s commonly called the “Flashback” or “Fakeflash” trojan, although the names are obsolete.
If you’re certain you know when that happened, and you back up with Time Machine or something similar, you can save yourself a lot of time by restoring your whole system from the most recent snapshot taken before it was infected. Then take Steps 7, 8, and 10 below.
How can you tell when the infection took place? All you can be sure of is that you were infected some time before the problems started. You may have visited a blog that prompted you to install some kind of software, or a “certificate.” You entered your administrator password when prompted. If you remember doing that recently, mention it in a reply, but don’t post a link.
If you don’t know when you were infected, there's no easy, reliable way to remove the malware, because it's constantly changing. There are differences of opinion on this site as to the best of course of action, so you should do your own research before deciding how to proceed.
I suggest you take the following steps:
1. Back up all data to at least two different devices, if you haven't already done so.
2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup volume. This action will destroy all data on the volume, so you must be sure of your backups.
3. Install the Mac OS.
4. Reboot and go through the initial setup process to create an account with the same name as your old one. Don’t import anything from your backups at this stage.
5. If running Mac OS X 10.6.x or earlier, run Software Update. You may have to run it more than once to fully update your system.
6. Restore the contents of the top-level subfolders of your home folder except “Library” from the most recent backup. The Library folder may contain components of the malware. It’s best not to restore anything from there. If you must do so, restore only files, not whole folders with all their contents, and only if (a) they’re visible in the Finder, and (b) you know what they are, and (c) they haven’t been altered. Don’t restore anything in the home subfolder Library/LaunchAgents, if it exists, or any hidden files or folders, no matter where they are.
7. If you’re running Mac OS X 10.5.8 or earlier, launch Safari and select Safari ▹ Preferences… ▹ Security from the menu bar. Uncheck the box labeled Enable Java. Because of known bugs, Java in those OS versions is unsafe to use on the Internet. (Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similar names.) If you’re running Mac OS 10.6.8 or later, you should still disable the Java web plugin unless you really need it. Few websites have legitimate Java content nowadays. If you encounter one that does, enable Java temporarily.
8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated.
10. If you use any third-party web browsers, disable Java in their preferences. As with step 7, this step is mandatory if you’re running any version of Mac OS X older than 10.6. Otherwise it’s optional, but recommended.

I bought iphone 4 from friend and he said he had dropped it in sweet tea at the top and it moved down to home button and now home button don't work how can i fix it? this happend long ago

ok i bought an iphone 4 from a friend he told me the story about it saying he had a glass of sweet tea with a little bit left, and he had dropped the phone in there upside down and it completely screwed up the phone and it was freaking out. after a while he said it all went away as if nothing happened but now the home button doesn't work so is there a way to fix the home button without taking it apart or sending it somewhere to get fixed?

You can make a Genius Bar appointment at your nearest Apple Store or start here https://selfsolve.apple.com/agreementWarrantyDynamic.do to send it in. In either case it will cost $149 USD to do an out-of-warranty replacement.

Installed FF4 and now my TouchPad no loner works, how do I fix this?

Similar Messages

Maybe you are looking for